Creating PO's from bidding...

Hi All,
We are trying to create PO from bids. We are able to see the bids submitted by the vendor. But i am not able to see the PO in the backend, instead iam able to see the PO locally.
Can anypne help me out.
Thanks,
Bert

Hi Bert,
this is the standard behavior.
If you create Bid Inv from scratch (i.e. without from a SC), a local PO is created.
Why ?
Because it is an incomplete PO by definition (you can not enter accounting data in Bid Inv or Quote), so it needs to be completed.
As we can not create an incomplete PO in R/3, we can only create it locally, where it can be completed in BBP_POC.
If you create Bid Inv from a SC, the system can retrieve more data form SC (like accounting data) and go further with PO creation. The PO creation follows the same path as usual SC transfer:
- if your SC is in classic scenario (SPRO define target system per category), then a backend PO will be created.
- if SC is local --> local PO.
- if SC is EP/DP --> local PO + R/3 PO.
Rgds
Christophe

Similar Messages

Change status of PO created from Bid response

Hi,
Can anyone let me know - which BADI or IMG Setting can be used to change the PO status to customized user status while creating Purchase Order from Bid Response accepted from a vendor ?
Regards,
Rajeshree

Hi All,
I tried using the SPRO settings for creating status profile with all user defined statuses and then attached this status profile to the transaction type for BUS2201 (PO) but it does not work. PO always shows awaiting approval status.
Do we have to implement a BADI in this case ?? please suggest...something.
BR,
Rajeshree

Create PO from Bid

Hello,
When we try to create a Po from bid in our local system (SRM), we get the message: u201CNo purchase order createu201D with several error message like these:
u2022     Executing target system XXXXX differs from the system for Accounting
u2022     Incorrect interface data for set PDORG in method C
u2022     Enter the company code
u2022     No logical system for FI is maintained. Inform system admin.
u2022     Vendor 0000305485 not intended for purch. org.
Apparently the bid is correct, do you know the reason of these errors?
     Many thanks, Juan Manuel

Hi Juan,
Could you please check the below things?
Has the vendor of your accepted bid been extended to the Purchase org of the RFQ or bid invitation?
Please also check if the required attributes like Sys_ACC, Vendor_Sys has been maintained in PPOMA_BBP?
Thanks and regards,
Ranjan

BADI BBP_CREATE_BE_PO_NEW for PO created from Bid.

Hi gurus.
Iu2019m working in classic scenario, and I need to change PO data before to create the PO in ECC.
When we create a PO form SC we can change data in BADI BBP_CREATE_BE_PO_NEW (methods FILL_PO_INTERFACE and FILL_PO_INTERFACE1) without problem. But when we create a PO from a BID the BADI doesnu2019t work.
If we fix a break-point the system stop for PO created from SC, but doesnu2019t stop for PO from Bid.
Any suggest?
Thanks and regards.
Raúl.

What you can try is to use the BBP_DOC_CHANGE_BADI for BID: when price is 0: clear IR_IND (invoice expected) and GR_IND (goods receipt expected) on item level. Be prepared for SRM putting back those indicators though (SRM gets these from the vendor details).
The badi you mentioned in your first post should be the one you have to use as you are in classic mode. I would raise an OSS note because the way you use the badi is correct - it should be called and if it doesn't SAP has to provide a solution.
Maybe there is a user-exit in ECC in the function module that creates the order (BAPI_PO_CREATE1) as a (hopefully temporary) work around.
Regards,
Robin

Fill the custom fields of backend PO from bid invitation

Hi all,
From bid invitation I am generating a purchase order. A PO is getting created in the backend. But when I save the PO in the backend it gives an error because a custom field (created in both backend PO and bid invitation) is mandatory for creating a PO is not filled. I have to map the Z field created in bid invitation to the custom field in backend. But in the badi BBP_CREATE_PO_BACK there is no information regarding the quotation or bid invitation. Is there any way to get the bid or bid invitation details like bid guid or bid invitation guid or any other field which related the PO to bid in the badi BBP_CREATE_PO_BACK?
Regards,
Asha

Hi Sundeep,
This problem looks to be a program error. SAP suggest few notes for the account assignment errors. However i could not found out any relation for this error w.r.t commodity code.
The related OSS notes are as under :
<b>Note 1000184 - Account assignment error when document transfer to back end</b>
<b>Note 966323 - Service Item: Not able to create PO in ERP backend</b>
The note 1000184 is more relavent in your case and other related notes are mentioned in that note which may resolve your issue.
Hope this note will definitely come to your help.
Please let us know the outcome for further help.
Rgds,
Teja

Classic Scenario: follow on document from BID

Dear All,
We are trying to create a PO from an accepted BID . We can create the PO, and if we check it in the backend system, everything is OK.
Our problem is that we are trying to find in SRM, somewhere that shows us the follow on document of the Bid but we can´t find it.
It´s important to say that as soon as the PO is created, we get a message that contains the PO number. But after that, we can´t find in SRM the PO number anymore.
Is this a lack of SRM or may be another problem? Has anyone face up with this issue? If so, How it was resolved?
Thanks,
Pablo.-

I noticed that you have a very similiar Bidding scenario that we have. We can create a bid invitation in SRM and we have used the BADI - BBP_DETERMINE_LOGSYS to indicate to the system to create a purchase order in the backend system after the bid is accepted. We keep getting the following error in SM21: Purchase orders cannot be created without IPC pricing
Did you have to turn on the IPC in order to create the purchase order in R/3? We are on SRM 4.0. Also, if you have used the BBP_DETEMINE_LOGSYS Badi and have example code that might be helpful as well...thanks!

Standard process for PO creation from Bid Invitation or Bid

Hi everybody,
I would like to know what is the standard process to create local Purchase Order (i mean in a extended classic scenario) from Bid Invitation or Quotation.
In the current process, Bid Invitation are created form Shopping Cart using Sourcing Cockpit. Then, Purchaser will send its Bid to supplier (by publishing Bid Invitation) using BBP_BID_INV transaction.
Then, supplier will submit its Bid.
At this step, what it is the standard process (does it exist ?) to create a Purchase Order linked to this Bid ?
The need is to have a PO as follow-on document to Bid.
Thank you to clarify this point.
Regards.
Laurent Burtaire.

Hi,
After the bids are submitted and when the bid invitation opening date arrives, there will be a map for you to compare the bids received.
To see this map, go to BBP_BID_INV transaction and the map will be there when you search your document.
When you click on this map, you will find one column for each of the companies that sent quotations.
You can click on the company's name and then you need to click on button 'Accept', in order to accept the company's quotation.
Then you click on 'Refresh'.
Then you click on 'Create Purchase Order' or 'Create Contract'.
In order for that to happen, you must have defined number ranges and document types for bid invitation, quotation and purchase order.
Let me know if it helped.
Regards,
Henrique

PO from Bid has active Incomplete and Complete statuses

Hello Everyone,
We experience PO's created from Bid where the status is both Complete and Incomplete. Please see status table below:
           Status         Description                    Inactiv
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete                       X
HEADER     I1180          Document Completed
HEADER     I1043          Ordered
HEADER     I1039          Incomplete                     X
HEADER     I1080          In Transfer to Execution Syst. X
We also observed that at Header, it has blank/space value in Flow control field (DOC_FLOW_CTRL).
This PO can not be displayed by suppliers in GR/SE for Vendor screen. PO has to be manually re-ordered so as to continue with the confirmation. But now, the PO's produce error messages such as:
System status INCM is active ( Purchase Order xxx )
System status ITRE is active ( Purchase Order xxx ).
These PO's are with NET account assignment.
Kindly share your inputs regarding this scenario.
Thanks and Regards,
Vhong

Hi,
Please check the bids.Once the bids are published again some correction is done and republished again
Regards
G.Ganesh Kumar

Auction from Bid Invitation

Dear All,
We are implementing SRM 5.0 and we have a requirement of creating Live Auction from a Bid Invitation. Can anybody help me as how to configure this?
Currently, we can have Bid Invitation as follow on document to a Bid Invitation.This has to be changed to Auction as follow on document to bid invitation.
Thanks in advance.
Regards,
Amit

Hi,
To be able to create a live auction from Bid invitation ,
you should first have a LAC 2.0 installed on your server.
Also, a RCF connection should be maintained between this component and EBP system with type HTTP Ext.
BR
Dinesh

Issue in navigating to cfolder from Bid Invitation in the specific instanc.

Hi,
We have an issue in cfolder, when we navigate from Bid Invitation after creation of instance for cfolder through the link in "Document" view..
Instead of opening directly into the specific instance of Bid Invitation in the cfolder, system open ups in u201CHome Menuu201D in the "Competitive "Scenariou201D with all the List of Bid Invitation instance visible in the cfolder.
The user have to search the Bid Invitation Instance in cfolderr to upload the documents. Whereas we require that the system should navigate directly into the Bid Invitation Instance of cfolder.
Kindly help me in resolving the issue, have I missed some config. in the cfolder .
With Regards
Manoj

There are a couple of things you should change.
First of all, you do not need a Proxy Service with Email transport. A Proxy Service with email transport is created to receive an email from a SMTP server, which is why it is one way only (you wont be sending a message response to SMTP server for an email received from it).
Your requirement is to send out an email from OSB, you will only need a Business Service with email transport for that.
You can call this business service from your main proxy using a Publish Action and set the subject field by adding Transport Headers in the Publish Action.
Main Proxy-->Email BS
If however, you want to have a common proxy in between to set the subject(may be so you can have that logic at one place and call it from multiple proxy services?), then you can create a Proxy Service with LOCAL transport. In this proxy service invoke the Email Business Service using a Publish Action and set the subject field by adding transport header. You can invoke this local proxy from your main proxy.
Main Proxy-->Local Common Proxy-->Email BS

Contract Mass Update from Bid/RFx Response functionality

In SRM 7.0 we have the following SPRO settings. Kindly explain me about Contract Mass Update from Bid/RFx Response functionality
SRM Server > Cross-Application Basic Settings > Contract Mass Update from Bid/RFx Response >
Define Process Parameters
Set Default Parameters
Thanks
srini

Hi,
Contract mass update Process starts when an RFx response or bid is accepted. Where items in the RFx response or bid have the same suppliers, the same currencies, and the same products as one or more existing contract, the contract(s) is (are) updated with the prices and other header/item information from the RFx response or bid. If the RFx response or bid contains new products, these can also be attached to existing contracts with the same supplier and currency (append function), or a new contract can created.
Coming to configuration part:
Define process parameters: Where you can define whether you want to update zero price quoted items to existing contracts or not (include / exclude options are available)
Set default parameters: Where we can control contract parameters for updated (either default / from RFx or BId), following SAP explanation will give you more clarity on it.
In this Customizing activity, you define which parameters are, by default, part of the contract mass update from an RFx response or a bid. To do this, select the Default Indicator.
You can select the Lock indicator to prevent the user from doing the following:
Deselecting a parameter that has been defined as a default parameter in Customizing
Selecting a parameter that has not been defined as a default parameter in Customizing
Regards,
krish

Is there a way to create a playlist from the now playing screen on ios7?

Is there a way to create a playlist from the now playing screen on ios7? I want to be able to hear a song in my collection and immediately add it to an existing playlist or create a new playlist.
Thank you in advance

Hi Cornellius,
From the now playing screen there's a Create button at the bottom that allows you to create a
Genius Playlist
New Station form Artist
New Station from Song
IPhone Help, Browse and play
http://help.apple.com/iphone/7/#/iph3cf21a82
The Now Playing screen provides playback controls and shows you what’s playing.
For information on Genius Playlists, see
Archived - Genius for iPod and iPhone
http://support.apple.com/kb/HT2978
I don't see an option to add it to an existing playlist.
Best Regards,
Nubz

Error while posting a sales order created with reference from contract for

Hi,
I am posting a sales document( Type: WA) created with reference from contract document( type wk2) for delivery. The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined". Please help me out how to resolve this issue.
Thanks
Jayant

Hi Jayant,
I think its value contract releated error,
You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
and do item category assignment through T.code- VOV4.
plz.maintain like that,
WK2 -          -VCIT-         -           - WAN(contract item category),
wk2 -          -        -VCTR-          - WAN((contract item category),
you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

Create XML file from ABAP with SOAP Details

Hi,
I am new to XML and I am not familiar with JAVA or Web Service. I have searched in SDN and googled for a sample program for creating XML document from ABAP with SOAP details. Unfortunately I couldn't find anything.
I have a requirement for creating an XML file from ABAP with SOAP details. I have the data in the internal table. There is a Schema which the client provided and the file generated from SAP should be validating against that Schema. Schema contains SOAP details like Envelope, Header & Body.
My question is can I generate the XML file using CALL TRANSFORMATION in SAP with the SOAP details?
I have tried to create Transformation (Transaction XSLT_TOOL) in SAP with below code. Also in CALL transformation I am not able to change the encoding to UTF-8. It's always show UTF-16.
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:template match="/">
    <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SOAP:Header>
        <CUNS:HeaderInfo>
          <CUNS:InterfaceTypeId>10006</InterfaceTypeId>
          <CUNS:BusinessPartnerID>11223344</BusinessPartnerID>
          <CUNS:SchemaVersion>1.0</SchemaVersion>
          <CUNS:DateTime>sy-datum</DateTime>
        </CUNS:HeaderInfo>
      </SOAP:Header>
      <SOAP:Body>
        <xsl:copy-of select="*"/>
      </SOAP:Body>
    </SOAP:Envelope>
</xsl:template>
</xsl:transform>
In ABAP program, I have written below code for calling above Transformation.
call transformation ('Z_ID')
       source tab = im_t_output[]
       result xml xml_out.
call function 'SCMS_STRING_TO_FTEXT'
    exporting
      text      = xml_out
    tables
      ftext_tab = ex_t_xml_data.
Please help me how to generate XML file with SOAP details from ABAP. If anybody have a sample program, please share with me.
Is there any easy way to create the XML file in CALL Transformation. Please help.
Thanks

Try ABAP forum, as it seems not to be PI related.

Need help in creating a chart from 3 datasets

Need help in creating a chart in SSRS from 3 datasets
Can someone help me in creating a chart from 3 datasets, however datasource is same.

Thank you Olaf...
could anyone help me in using union all with the below
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value ,
CASE metricid WHEN 16 THEN 'FCR' ELSE 'Cases' END AS metric
FROM XXXXXX AS V
WHERE metricid IN (16, 11)
AND row_date BETWEEN '2012-01-01' AND '2014-10-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'Cases',
metric
FROM a
WHERE metric = 'cases')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'FCR',
metric
FROM a
WHERE metric = 'FCR')
, d AS (
SELECT b.YEAR, b.MONTH, c.FCR, b.Cases
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.fcr <> 0 AND b.cases <> 0
,E AS (
SELECT [Year], [Month], SUM(FCR) AS FCR, SUM(Cases) AS Cases
FROM d
GROUP BY [Year], [Month])
select YEAR, MONTH,
CASE MONTH
WHEN 1 THEN 'Jan'
WHEN 2 THEN 'Feb'
WHEN 3 THEN 'Mar'
WHEN 4 THEN 'Apr'
WHEN 5 THEN 'May'
WHEN 6 THEN 'Jun'
WHEN 7 THEN 'Jul'
WHEN 8 THEN 'Aug'
WHEN 9 THEN 'Sep'
WHEN 10 THEN 'Oct'
WHEN 11 THEN 'Nov'
WHEN 12 THEN 'Dec'
END AS MonthName
,e.FCR AS FCRCases
,e.Cases AS TotalCases
,CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
--,CONVERT(DECIMAL(18, 2),(e.FCR/e.Cases)*100) AS FCRRaw
from e
order by YEAR, MONTH
**************2nd query*************
WITH a AS (
SELECT
clientid,
DATEPART(year, row_date) AS 'Year',
DATEPART(month, row_date) AS 'Month',
value,
CASE metricid WHEN 56 THEN 'numerator' ELSE 'denominator' END AS metric
FROM XXXXXXX.[Values] AS V
WHERE metricid IN (56, 10)
--WHERE metricid IN (11,16)
AND row_date BETWEEN '2013-10-01' AND '2014-02-01'
AND value IS NOT NULL)
, b AS (
SELECT clientid ,
Year ,
Month ,
value AS 'numerator',
metric
FROM a
WHERE metric = 'numerator')
, c AS (
SELECT clientid ,
Year ,
Month ,
value AS 'denominator',
metric
FROM a
WHERE metric = 'denominator')
, d AS (
SELECT b.YEAR, b.MONTH, c.denominator, b.numerator
FROM b INNER JOIN c
ON c.clientid = b.clientid
AND c.[YEAR] = b.[year]
AND c.[month] = b.[month]
WHERE c.denominator <> 0 AND b.numerator <> 0
, e AS (
SELECT [Year], [Month], SUM(numerator) AS numerator, SUM(denominator) AS denominator
FROM d
GROUP BY [Year], [Month]
SELECT *,
CASE
WHEN [month] IN (11, 12, 1) THEN 1
WHEN [month] IN (2, 3, 4) THEN 2
WHEN [month] IN (5, 6, 7) THEN 3
WHEN [month] IN (8, 9, 10) THEN 4
END AS 'Quarter'
FROM e
ORDER BY 1,2
******************3rd query**************
WITH a AS (
SELECT --L.[LocationGroupId],
-- T.locationid,
-- T.AccountId,
TR.datestamp,
/*Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01'*/
TR.Period AS ValueDate,
CASE WHEN TR.TargetResultState = 0 THEN 0 WHEN TR.TargetResultState = 1 THEN 1 WHEN TR.TargetResultState = 2 THEN 1 ELSE 0 END AS Met,
CASE WHEN CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp)) + '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') > T.Startdate AND CONVERT(DATE, Convert(NVARCHAR, DatePArt(year, TR.datestamp))
+ '-' + Convert(NVARCHAR, DatePArt(month, TR.datestamp)) + '-01') < T.Enddate THEN 1 ELSE 0 END AS ActiveTarget
FROM XXXXXX AS TR
INNER JOIN dbo.Target T ON TR.TargetID = T.ID
--INNER JOIN dbo.Location L ON T.Locationid = L.Id
WHERE --locationid <> - 1 AND
TR.Period IN ('201306', '201307', '201308', '201309', '201310', '201311', '201312', '201401'))
select ValueDate, SUM(Met) AS Met, Count(ActiveTarget) AS ActiveTargets,
right(ValueDate,2) as Month
,left(ValueDate,4) as Year
,CASE
WHEN right(ValueDate,2) IN (11, 12, 1) THEN 1
WHEN right(ValueDate,2) IN (2, 3, 4) THEN 2
WHEN right(ValueDate,2) IN (5, 6, 7) THEN 3
WHEN right(ValueDate,2) IN (8, 9, 10) THEN 4
END AS 'Quarter'
from a
group by ValueDate
order by ValueDate

Creating PO's from bidding...

Similar Messages

Maybe you are looking for