Creating purchase Requisition and release Overview

Hello,
We have some User which have the authorization to create a purchase Requisition and also to release it by themselves.
We have to Monitor this cases and I' looking for a possibility to check this on a easy way.
I found the Report "Changedocu_read". There I can check several changes in the PR and see who released it. But there I can not see which User created the PR.
The table EBAN has the informations about the User who created the PR and if it had to be released and some more informations. But the informations who released the PR is missing.
I tryed a table-join of the tables EBAN and CDHDR. But it was not possible, because the PR Number (Filed "BANFN" in the EBAN) has not the same format as the number in the Filed "object value" in the table CDHDR.
Perhaps someone has an idea ?
Or there is an Standard Transaction which I did not found to have an overview of the PR and the releases
It would be enough to see following informations with one Join or Transaction:
-PR Number
-Creation Date
- Transaction code
-Change Date
-Release Status
-Released date
-Released by User
I have the same Topic also by purchase orders and the release of them.
Thank you in advance
Regards
Dirk

Thanks both for the quick reply.
@AKPT
The Transaction is nice and helpful to Display some informations. But similar results I also receive when I use the Programm : "changedoc_read". I also had the idea to join the informations of the 2 sources in Excel. For me this Workaround would be ok.
But unfortunately I' m looking for an simply way (for the Enduser). To get this informations mentioned above in one overview directly in SAP.
They have to use this check regularly, to Monitor if there were some wrong Releases.
If there is not such a way then we have to join it in Excel.
But if you have some other suggestions I'm happy to hear them.
Regards
Dirk

Similar Messages

Make item to create Purchase Requisition and Work Order

I have a requirement for a Make item to create Back to Back Purchase Order from Sales Order. At the same time, need to create Work Order from Sales Order for the same item. I have done all setups for Back to Back order and able to create Purchase Requisition from Sales Order line. But how to create Work Order. What are the setups to achieve this? Thanks

Ajith_Kz; Consultant wrote:
I have a requirement for a Make item to create Back to Back Purchase Order from Sales Order. At the same time, need to create Work Order from Sales Order for the same item. I have done all setups for Back to Back order and able to create Purchase Requisition from Sales Order line. But how to create Work Order. What are the setups to achieve this? ThanksI guess it can't be done..when u say u created a purchase req?i was just wondering how did the system let u to create a POR when you say it is a make item?
HTH
Mahendra

Purchase requisitions and purchase orders

Hello Gurus,
In contrast, by default, both purchase requisitions and purchase orders can be generated automatically for the item category ALES, will you please tell me the sequence and where to create purchase requisitions and purchase orders ?
Many thanks,

Hello,
The PO is getting created automatically because of the Create PO automatically check in the item categroy ALES.
But in normal case, the PR will be generated, it is a request for purchase, it should get approved by the purchasign dept, then create PO with reference to the PR.
Prase

What program in SAP SD automatically creates Purchase requisition

What program in SAP SD automatically creates Purchase requisition, and also please tell me the user exit that we can use to change the delivery address automatically from plant address to ship-to address during purchase requisition creation time...
Your help will be appreciated.
Thanks,

Hi,
The control to Create the PURCHASE REQUISITION is in the SCHEDULE LINE CATEGORY VOV6
The Purchase requisition will be created automatically for the THIRD PARTY and INDIVIDUAL PURCHASE ORDERS
The field in VOV6
ORDER TYPE
ITEM CATEGORY
ACCOUNT ASSIGNMENT
Will determine the Document type for creating the Purchase requisition
IFor both THIRD PARTY & INDIVIDUAL PURCHASE ORDER the standard Purchase requsition document type is NB and
ITEM CATEGORY 5 will determine whether it is third party or Individual PO.
Hope it is clear,
Please revert back if you need more details
regards,
santosh

IW31-Create Purchase Requisition automatically from PM order - Release 5.0

Dear Experts,
Currently we are working in the 4.6C Release but we are doing the migration for 5.0. In PM, in the 4.6C release when we
create a PM Order in tcode IW31 we select a component and the system shows us the screen to inform the quantity and
automatically the system shows us a screen to Create Purchase Requisition where we can fill or select some fields.
However, when we create a PM order in the 5.0 using the same tcode, the same material type, the system creates
automatically the Purchase Requisition without to show us the screen to fill or select the fieds. I´ve checked the customizing
comparing the systems but I couldn´t find something.
I was wondering If you could help me with this issue?
If my comments are not enough to understand me, please let me know...
BR
Valdevair

Dear friend,
Do check configuration node at
plantmaintenance and custonmer service - maintenance and service processing -maintenance and service orders - functions and settings for order types - define change documents,collective pur.requisitionsindicator,operation no.interval
here for your order type and plant , check whether generation of PURCGHASE REQUISITION from maintenance order settings.
there will be three options
1) never
2) from release
3) immediatly.
hipe this will help you.
Regards,
pardhu

Creating purchase requisitions instead of planned orders after MRP run in MDBT

When running regenerative planning in MDBT for plant with following details ,The system has to provides planned orders for the materials .
Processing key:NEUPL
Create Purchase requisition :3
Schedule lines:3
Create MRP list:1
Planning Mode:1
Scheduling :1
But sometimes it provides purchase requisitions for certain materials.The problem happens for different materials at different times.
I checked the material master and found that procurement type is external procurement.Business need to create planned order for the materials and then want to convert it to purchase requisition.
MRP group is assigned to the materials but no creation indicator maintained for the MRP group.
Please tell me why this run creates purchase requisitions suddenly and in the next run it disappears?

Hello
Maybe someonelse is running MRP in another transaction, such as MD02, with a different parameter. Check on transaction MD05 when was the last MRP execution and the user that ran it.
Also check if there is any active implementation of BAdI MD_MRP_PARAMETERS.
If you don't have a cretion indicator, maybe it would be useful to set it for your MRP group, with the parameter 3, in order to make sure that planned orders will be created.
BR
Caetano

Which table holds the link between Purchase requisition and Reservations ?

Hi Guys,
We are using MRP and as a result of the MRP run the reservations are converted to purchase requisition. When i look at transaction MD04 it shows me the Purchase requisition against a reservations.
I would like to know which table holds this information? I mean which table will give me the reservations tied to a purchase requisition or vice a versa.
I have looked into RESB and RSBD but could not find what i am looking at. RESB table has BANFN field for purchase requisition but this field is not populated. RSBD table hold the Purchase requisition and reservations but it only holds the relation for Direct procurement and not for all.
Any idea where i can find the Preq and Reservations created through MRP run?
Thanks
VJ

Try RKPF..
thanks
jz

How To Restrict Users To Only Create Purchase Requisitions with Item Catalog?

Hi, everyone
Please help me,
How To Restrict Users To Only Create Purchase Requisitions with Item Catalog? is it possible?
Regards, Manuel

Hi Steenie Norman
First click on the text item ---> Tools ---> Property Pallete ---->
and change the Keyboard State to Local Only also this Depend in your OS
hope this useful ....
Regards
Mohammed

Report on list of purchase requisitions and related POs..

Hi,
I have a requirement to generate a simple abap report to display a list of purchase requisitions and its related POs. If my understanding is correct, for a single purchase requisition, multiple POs can exist, right ? Can someone help me with the select query for this ? also can you let me know typically what can be the basic fields displayd in such a report ?
I need to understand the relationship between the tables involved for pur req and Pur orders.
thanks

Hi check this code... to get PO and PR related to SO..
REPORT z_so_info.
TABLES: vbak, vbap, afko, afpo.
*Field catalog
TYPE-POOLS: slis.
DATA: lv_repid TYPE sy-repid VALUE sy-repid,
xfield TYPE slis_t_fieldcat_alv,
afield TYPE slis_fieldcat_alv.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(25) text-002.
SELECT-OPTIONS: so_so FOR vbak-vbeln OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-003.
PARAMETERS:
p_kunnr LIKE vbak-kunnr, " sold-to
p_kunwe LIKE vbak-kunnr. " ship-to
SELECTION-SCREEN END OF BLOCK b2.
*Constants
CONSTANTS: c_zor TYPE vbak-auart VALUE 'ZOR',
c_we TYPE vbpa-parvw VALUE 'WE',
c_ag TYPE vbpa-parvw VALUE 'AG'.
c_space TYPE space.
*Ranges
RANGES: ra_parvw FOR vbpa-parvw,
ra_kunnr FOR vbpa-kunnr.
*Tables
DATA: BEGIN OF gt_output OCCURS 0,
vbeln LIKE vbak-vbeln, " sales order number
posnr LIKE vbap-posnr, " SO item number
matnr LIKE vbap-matnr, " material number
sh LIKE vbpa-kunnr, " Ship-to
sp LIKE vbpa-kunnr, " Sold-to
lifnr LIKE ekko-lifnr, " Vendor
bstnk LIKE vbak-bstnk, " PO number
banfn LIKE vbep-banfn, " Purchase requi
po_st TYPE char30, " PO status text
pstyv TYPE vbap-pstyv, " Item catagory
aufnr LIKE afpo-aufnr, " Production Order
prd_stat TYPE string, " Prd order status
END OF gt_output.
DATA: wa_output LIKE gt_output.
FIELD-SYMBOLS: <fs_output> LIKE gt_output.
*Table for sales order and PO
TYPES : BEGIN OF gs_data,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
pstyv TYPE vbap-pstyv,
matnr TYPE vbap-matnr,
END OF gs_data.
DATA: gt_data TYPE STANDARD TABLE OF gs_data,
wa_data TYPE gs_data.
*Table for Production Orders
TYPES: BEGIN OF gs_prd,
aufnr TYPE afpo-aufnr,
posnr TYPE afpo-posnr,
kdauf TYPE afpo-kdauf,
kdpos TYPE afpo-kdpos,
wepos TYPE afpo-wepos, "Goods Receipt Indicator
elikz TYPE afpo-elikz, "Delivery Completed Indicator
objnr TYPE aufk-objnr, "Object number
getri TYPE afko-getri, "Confirmed Order Finish Date
gltri TYPE afko-gltri, "Actual finish date
END OF gs_prd.
DATA: gt_prd TYPE STANDARD TABLE OF gs_prd,
wa_prd TYPE gs_prd.
*Table for partner data
TYPES: BEGIN OF gs_partner,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
parvw TYPE vbpa-parvw,
kunnr TYPE vbpa-kunnr,
END OF gs_partner.
DATA: gt_partner TYPE STANDARD TABLE OF gs_partner,
wa_partner TYPE gs_partner.
TYPES: BEGIN OF gs_po,
ebeln TYPE ekkn-ebeln,
ebelp TYPE ekkn-ebelp,
vbeln TYPE ekkn-vbeln,
vbelp TYPE ekkn-vbelp,
END OF gs_po.
DATA: gt_po TYPE STANDARD TABLE OF gs_po,
wa_po TYPE gs_po.
TYPES: BEGIN OF gs_preq,
vbeln TYPE vbep-vbeln,
posnr TYPE vbep-posnr,
banfn TYPE vbep-banfn,
END OF gs_preq.
DATA: gt_preq TYPE STANDARD TABLE OF gs_preq,
wa_preq TYPE gs_preq.
TYPES: BEGIN OF gs_po_stat,
ebeln TYPE ekko-ebeln,
procstat TYPE ekko-procstat,
lifnr TYPE ekko-lifnr,
END OF gs_po_stat.
DATA: gt_po_stat TYPE STANDARD TABLE OF gs_po_stat,
wa_po_stat TYPE gs_po_stat.
*Field symbols
FIELD-SYMBOLS: <fs> TYPE tj02t-txt04,
<fs_temp> TYPE tj02t-txt04,
<fs_stat> TYPE char30.
START-OF-SELECTION.
PERFORM fr_build_range.
PERFORM fr_get_data.
PERFORM fr_build_fc.
PERFORM fr_output.
*& Form fr_get_data
text
--> p1 text
<-- p2 text
FORM fr_get_data.
*Get SO
SELECT avbeln aposnr apstyv amatnr
FROM vbap AS a
JOIN vbak AS b
ON avbeln = bvbeln
JOIN vbpa AS c
ON bvbeln = cvbeln
INTO TABLE gt_data
WHERE b~vbeln IN so_so
AND b~auart EQ c_zor "Only Sales Orders
AND c~kunnr IN ra_kunnr. "from selection screen
DELETE ADJACENT DUPLICATES FROM gt_data COMPARING vbeln posnr.
*get data of the production order
IF NOT gt_data[] IS INITIAL.
SELECT aaufnr aposnr akdauf akdpos awepos aelikz
b~objnr
FROM afpo AS a
JOIN aufk AS b
ON aaufnr = baufnr
INTO TABLE gt_prd
FOR ALL ENTRIES IN gt_data
WHERE a~kdauf EQ gt_data-vbeln
AND a~kdpos EQ gt_data-posnr.
ENDIF.
*Get partner data
IF NOT gt_data[] IS INITIAL.
SELECT vbeln posnr parvw kunnr
FROM vbpa
INTO TABLE gt_partner
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln.
ENDIF.
*Get Purchase Order
IF NOT gt_data[] IS INITIAL.
SELECT ebeln ebelp vbeln vbelp
FROM ekkn
INTO TABLE gt_po
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND vbelp EQ gt_data-posnr.
SELECT vbeln posnr banfn
FROM vbep
INTO TABLE gt_preq
FOR ALL ENTRIES IN gt_data
WHERE vbeln EQ gt_data-vbeln
AND posnr EQ gt_data-posnr.
ENDIF.
IF NOT gt_po[] IS INITIAL.
SELECT aebeln aprocstat a~lifnr
FROM ekko AS a
JOIN ekpo AS b
ON aebeln = bebeln
INTO TABLE gt_po_stat
FOR ALL ENTRIES IN gt_po
WHERE b~ebeln EQ gt_po-ebeln
AND b~ebelp EQ gt_po-ebelp.
ENDIF.
*Move data to output table
LOOP AT gt_data INTO wa_data.
wa_output-vbeln = wa_data-vbeln.
wa_output-posnr = wa_data-posnr.
wa_output-pstyv = wa_data-pstyv.
wa_output-matnr = wa_data-matnr.
READ TABLE gt_po INTO wa_po WITH KEY vbeln = wa_data-vbeln
vbelp = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-bstnk = wa_po-ebeln.
READ TABLE gt_po_stat INTO wa_po_stat WITH KEY ebeln = wa_po-ebeln.
IF sy-subrc EQ 0.
wa_output-lifnr = wa_po_stat-lifnr.
CASE wa_po_stat-procstat.
WHEN '01'.
wa_output-po_st = 'Version in process'.
WHEN '02'.
wa_output-po_st = 'Active'.
WHEN '03'.
wa_output-po_st = 'In release'.
WHEN '04'.
wa_output-po_st = 'Partially released'.
WHEN '05'.
wa_output-po_st = 'Released Completely'.
WHEN '08'.
wa_output-po_st = 'Rejected'.
ENDCASE.
ENDIF. "inner read subrc
ENDIF. "outer read subrc
READ TABLE gt_preq INTO wa_preq WITH KEY vbeln = wa_data-vbeln
posnr = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-banfn = wa_preq-banfn.
ENDIF.
READ TABLE gt_prd INTO wa_prd WITH KEY kdauf = wa_data-vbeln
kdpos = wa_data-posnr.
IF sy-subrc EQ 0.
wa_output-aufnr = wa_prd-aufnr.
*get the purchase requisition for production order as well
SELECT SINGLE banfn
FROM ebkn
INTO wa_output-banfn
WHERE aufnr EQ wa_prd-aufnr.
*Get the status of the production order
PERFORM fr_get_prd_stat USING wa_prd-objnr
CHANGING wa_output-prd_stat.
ENDIF. " sy-subrc
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_we.
IF sy-subrc EQ 0.
wa_output-sh = wa_partner-kunnr.
ENDIF.
READ TABLE gt_partner INTO wa_partner WITH KEY vbeln = wa_data-vbeln
parvw = c_ag.
IF sy-subrc EQ 0.
wa_output-sp = wa_partner-kunnr.
ENDIF.
APPEND wa_output TO gt_output.
CLEAR: wa_data, wa_prd,wa_partner,wa_output.
ENDLOOP.
ENDFORM. " fr_get_data
*& Form fr_build_range
text
--> p1 text
<-- p2 text
FORM fr_build_range .
*Range for partner function
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SH' TO ra_parvw-low. " we
APPEND ra_parvw.
CLEAR ra_parvw.
MOVE 'I' TO ra_parvw-sign.
MOVE 'EQ' TO ra_parvw-option.
MOVE 'SP' TO ra_parvw-low. " ag
APPEND ra_parvw.
CLEAR ra_parvw.
*Range for ship-to and sold-to
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunnr TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
MOVE 'I' TO ra_kunnr-sign.
MOVE 'EQ' TO ra_kunnr-option.
MOVE p_kunwe TO ra_kunnr-low.
APPEND ra_kunnr.
CLEAR ra_kunnr.
ENDFORM. " fr_build_range
*& Form fr_build_fc
text
--> p1 text
<-- p2 text
FORM fr_build_fc .
sales order number
afield-fieldname = 'VBELN'.
afield-seltext_s = 'Sales #'.
afield-ref_tabname = 'VBAK'.
APPEND afield TO xfield. CLEAR afield.
sales ITEM number
afield-fieldname = 'POSNR'.
afield-seltext_s = 'Item #'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
Material Number
afield-fieldname = 'MATNR'.
afield-seltext_s = 'Material #'.
afield-ref_tabname = 'VBAP'.
afield-outputlen = 10.
APPEND afield TO xfield. CLEAR afield.
*Vendor Number
afield-fieldname = 'LIFNR'.
afield-seltext_s = 'Vendor Num.'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
ship-to-party
afield-fieldname = 'SH'.
afield-seltext_s = 'Ship-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
sold-to-party
afield-fieldname = 'SP'.
afield-seltext_s = 'Sold-to'.
afield-ref_tabname = 'VBPA'.
APPEND afield TO xfield. CLEAR afield.
*PO number
afield-fieldname = 'BSTNK'.
afield-seltext_s = 'PO NUM'.
afield-ref_tabname = 'EKKO'.
APPEND afield TO xfield. CLEAR afield.
*PO status
afield-fieldname = 'PO_STAT'.
afield-seltext_s = 'Step'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*PO step status
afield-fieldname = 'PO_ST'.
afield-seltext_s = 'PO.Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
*Purchase requisition
afield-fieldname = 'BANFN'.
afield-seltext_s = 'Pur. Req.'.
afield-ref_tabname = 'VBEP'.
APPEND afield TO xfield. CLEAR afield.
*Item catagory
afield-fieldname = 'PSTYV'.
afield-seltext_s = 'Itm. Catg'.
afield-ref_tabname = 'VBAP'.
APPEND afield TO xfield. CLEAR afield.
*Prodcution Order number
afield-fieldname = 'AUFNR'.
afield-seltext_m = 'Prod.Order'.
afield-ref_tabname = 'AFKO'.
APPEND afield TO xfield. CLEAR afield.
*PRODCUTION status
afield-fieldname = 'PRD_STAT'.
afield-seltext_s = 'Prd. Step'.
afield-ref_tabname = 'zbacklog_v2'.
afield-outputlen = 20.
APPEND afield TO xfield. CLEAR afield.
*PRODUCTION step status
afield-fieldname = 'PRD_ST'.
afield-seltext_s = 'Prd. Status'.
afield-ref_tabname = 'zbacklog_v2'.
APPEND afield TO xfield. CLEAR afield.
ENDFORM. " fr_build_fc
*& Form fr_output
text
--> p1 text
<-- p2 text
FORM fr_output .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_STRUCTURE_NAME =
IS_LAYOUT =
it_fieldcat = xfield[]
i_default = 'X'
i_save = 'A'
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. " fr_output
*& Form fr_get_prd_stat
text
-->P_WA_PRD_OBJNR text
FORM fr_get_prd_stat USING p_objnr CHANGING p_prd_stat.
DATA: lt_status TYPE STANDARD TABLE OF jstat,
wa_status TYPE jstat,
lv_status TYPE tj02t-txt04,
lv_temp2 TYPE char5,
lv_buff TYPE string.
CALL FUNCTION 'STATUS_READ'
EXPORTING
client = sy-mandt
objnr = p_objnr
only_active = 'X'
TABLES
status = lt_status
EXCEPTIONS
object_not_found = 1
OTHERS = 2.
LOOP AT lt_status INTO wa_status.
IF wa_status-stat(1) EQ 'I'.
SELECT txt04 FROM tj02t
INTO lv_status
WHERE istat EQ wa_status-stat
AND spras EQ 'E'.
ENDSELECT.
lv_temp2 = lv_status.
CONCATENATE lv_temp2 p_prd_stat INTO p_prd_stat
SEPARATED BY ','.
ENDIF.
CLEAR: wa_status, lv_status, lv_temp2.
ENDLOOP.
lv_buff = p_prd_stat.
*Status of Production Order
IF lv_buff CS 'CRTD'.
p_prd_stat = 'Not Active'.
ENDIF.
IF lv_buff CS 'REL'.
IF lv_buff CS 'GMPS'.
p_prd_stat = 'Printed In Prod'.
ELSE.
p_prd_stat = 'Printed'.
ENDIF.
ENDIF.
IF lv_buff CS 'TECO'.
p_prd_stat = 'Technically Compt.'.
ENDIF.
ENDFORM. " fr_get_prd_stat

Automatic Link of Documents in purchase requisition and purchase order

Dear guru.
I have created a document in CV01N and I have linked it in document data view of a material master(MM02).
For every purchase requisition and purchase order position created for this material I need that the system execute an automatic link to this document.
How can I do that ?
Thanks

Hello,
You can only derive the attached documents from the preceding documents only (for example. Purchase Requisition). Deriving the attached document from the material master is not a standard scenario. This scenario is not in the system. You need to manually attach it.
bg, Gabor

While creating Purchase Requisition we need to send a mail for approvers

Hi All,
While creating Purchase requisition we need to send a mail to approvers.
Dowe need to create Function module ?
if You know the steps can you please give me the steps.
Thanks In advance
Sriman.

Hi Sriman
Here we can try for 2 approach
one is workflow and other his sending emails via user exit.
I am not much aware about workflow, but you can explore for user exit.
Try for enhancement component 'MEREQ001'.
let me know, if you need further help
Regards
MD

Creating Purchase Requisitions from within PS (ie from network)

When creating purchase requisitions from within Projects Systems (ie activating them from a network) is there a "standard" way to put a cost center on the Purchase Requisition? Currently no cost center is put on the account assignment. We are looking at doing a custom field on the network header to hold the cost center and then a user exit to take this cost center and put it on the purchase requisition (and reservations) but before we go to all this trouble thought maybe I should check to see if I am missing something obvious? Is there a more straight-forward way to accomplish this? We know that we cannot edit the account assignment in ME52N becuase the PR originates from the network and therefore can only be changed from the network.
Any input welcome. Thanks.

Dear Laura,
When you will create Purchase Requistion through Network, system automatically takes account assignment category as "N" i.e Network. This you can not change in ME52N transaction.
So this is a standard practise for generating Purchase Requistion through Network in PS Module.
As you said putting Cost Center in Network Header as a Account Assignment Category which will go up to PO creation by using some User Exit which will not be possible in PS Module as per my knowledge is concern.
But you want to keep Cost Center as as a Account Assignement Category you need to create manual Purchase Requisition through ME51N transaction.
Hoping this will be useful to you.
Regards,
Sandeep

Error while creating purchase requisition

Hello
I am getting following error when I try to create Purchase Requisition
u201CField selection PT4B not definedu201D
Cant progress any further due to the error
Regards,
sudhir

Hi
First Do you Have created any new field selection for PR document types?
IF not check your PR document type is attached with which field selection in Puchasing -> purchase requisition -> define document types -> check your document type and field selection. Is it PT4B?
PT4B is not available then assign correct one in customization.
If it is then check the settings for fields selection in purchasing -> PR - screen layout at document level -> field selection PT4B.
Regards

BAPI to create Purchase Requisition for selective BOM Material

Dear Experts,
I need ur help, Actually I am developing a module Pool prg to create Purchase Requisition for selective Bom Material .
Actually, standard T.Code (ME21N) create PR for a multiple BOM Materia lwhich are used to create a prepared material. But my requirement is PR should be generate for selective BOM material .
Multiple BOM Material is used to prepared a complete Material .
I have checked a particular BOM Material, for this matrial Purchase Requisition should be genrate.
Please suggest me the related code and Bapi which helps me .
Thanks & Regards,
Swapnika

Hi
you can Use BAPI BAPI_REQUISITION_CREATE
Hope Its help You.
Regards
Ajit

Create Purchase requisitions directly using PS network or indirectly ME51N

Hello SAP-PS consultants,
My customer manage big projects that most of the work done by suppliers, contractors and consultants. We use WBS element to define phases in project and for link to budget control in FM (every phase as different budget). We also use activities network to manage the work in the phases. I offer my customer to create Purchase requisitions, as a standard integrated process, using activities. My customer thinks that is more difficult and complicated to create Purchase requisitions directly using PS network. From your experience, is it better to create purchase directly using PS network or indirectly using MM transaction?
Regards
Muly Zohar

Hi Muly,
The decision to go for PR creation from PS or from MM will be based on the customer requirement.
1.If the customer requirement is to have both the cost integration as well as the integration project schedule with the PR , then you create the PR from PS.Any changes in the dates of the network will change the requirement dates of the components and will be transferred to the Purchase requisition. Further more planned cost distribution across the duration of the activity is possible in this approach.
2. Creating the PR from MM will have only the cost integration with the project. Any changes in the project schedule will not transfer the requirement date to the purchase requisition. You normally go for this where scheduling and procurement are independent of each other.
By clearly explaining these points to your client, I hope they can make a better choice of which approach to take based on business requirement.
Regards
K Ramaiah

Creating purchase Requisition and release Overview

Similar Messages

Maybe you are looking for