Creating reports for user tables using XL reporter

Hi all
i wish to create a report based on user tables using the XL reporter.
question is: is it possible? and if so how can it be done?
appreciate the help
Yoav

Hi Yoav,
XL Reporter cannot pull data from UDTs. However, you can use an Excel template when creating your XL Reporter report and then embed VBA code in the template to pull the UDT data in to the report after the XL Reporter has finished generating the report. It all depends on how you need to combine the UDT data with other SBO data. If you are interested in a report based entirely on UDT data then it would be simpler just to write the report using VBA in Excel (or Crystal).
Kind Regards,
Owen

Similar Messages

Interactive Reports for Marketing Campaigns using HANA

Dear Experts,
We are Implementing Interactive Reports for Marketing Campaigns using HANA Hence, I request you all to help with the Config Steps / any documents that help.
Your Help is really appreciated.
Thanks In advance
Satish

David,
There are several drawbacks with the standard functionality that you will encounter:
- SAPconnect only supports HTTP url posting or RFC destination setup (which means you need a third party server program)
- The mail forms do not impose a limitation on the length of messages
- Target groups do not check if the person has a mobile number.
If you look at SMS gateway providers they normally allow use via web service or SMPP. If you plan on doing "bulk" campaigns where you will generate multi-thousand messages a month then you need to use one of these options. SMPP is a binary protocol that is way too complicated for a business application to implement. So web services is your best bet.
If we used mostly standard CRM functionaliy we would do the following for SMS:
- Use the segment builder to handle our target groups
- Use the personalized mail functionality
- Use the open channel exits for segment execution to handle the communication to SMS gateway.
Now keep in mind that for SMS campaigns this is going to be cubersome, and not going to provide all the mobile marketing functionality you need. It still appears that even for CRM 52/2007 that mobile marketing is not really fully addressed in the solution with several major gaps.
We ended up going down a custom route, because the segment builder was not-user friendly and unstable in CRM 40 and the mail form technology did not meet our needs for sending messages and creating template based scenarios. We still make use of the CRM business partner master for the distribution.
If you have any further questions on doing SMS campaigns with CRM, please let me know. This is one area where I have spent some extensive research. If you are looking for SMS gateway providers in the US, I can also provide some names based on our previous research.
Thank you,
Stephen

Project Report for One Project Using Excel

Hi,
Is is possible to create a report for one project using excel?
I want to create a pdp with an Excel Viewer web part and have the following tabs with data specific to the one project.
1. Cover
2. Issues
3. Risks
4. Deliverables
I tried passing the ProjUid to an Excel doc via the Excel Query Filter Web Part and was able to filter the Issues lists only but don't know if its possible to filter out the other tabs by using the same paramater. Is this possible?
I have not looked at Odata but was wondering if it was possible to pass a paramater to the odata query and still have the spreadsheet work in a web view in SharePoint?

Hi,
I'd say that as far as you promote the Proj UID field as a filter in all sheets of your Excel workbook, using the Excel
Query Filter Web Part should work fine. But testing it should be easy, since you already did half of the work.
See excellent article from Andrew on this topic:
http://azlav.umtblog.com/2012/12/05/filtering-excel-webparts-in-office-365-part-2/
http://azlav.umtblog.com/2012/07/03/creating-a-project-resource-list-in-a-pdp/
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Daily report for user sessions in oracle10g database

I would like to genarate the daily report for user sessions in oracle10g database
daily report of how many of sessions present in oracle database for each user

Thanks for link ( I know you always post the oracle document link here)
But I am expecting scripts( someting like logon trigger and logg off trigger) to genarate the user session report.

What is authorization object and how to create it for a table

Hi All,
What is authorization object and how to create it for a table?
Thanks

Hi
Authorization
For authorization checks, there are many ways of linking authorization objects with user actions in an SAP system. The following discusses three possibilities in the context of ABAP programming.
Authorization Check for Transactions
You can directly link authorization objects with transaction codes. You can enter values for the fields of an authorization object in the transaction maintenance. Before the transaction is executed, the system compares these values with the values in the user master record and only starts the transaction if the appropriate authorization exists.
Authorization Check for ABAP Programs
For ABAP programs, the two objects S_DEVELOP (program development and program execution) and S_PROGRAM (program maintenance) exist. They contains a field P_GROUP that is connected with the program attribute authorization group. Thus, you can assign users program-specific authorizations for individual ABAP programs.
Authorization Check in ABAP Programs
A more sophisticated, user-programmed authorization check is possible using the Authority-Check statement. It allows you to check the entries in the user master record for specific authorization objects against any other values. Therefore, if a transaction or program is not sufficiently protected or not every user that is authorized to use the program can also execute all the actions, this statement must be used.
AUTHORITY-CHECK OBJECT object
 ID name1 FIELD f1
 ID name2 FIELD f2
 ID namen FIELD fn.
object is the name of an authorization object. With name1, name2 ... , and so on, you must list all fields of the authorization object object. With f1, f2 ... , and so on, you must specify the values that the system is to check against the entries in the relevant authorization of the user master record. The AUTHORITY-CHECK statement searches for the specified object in the user profile and checks the useru2019s authorizations for all values of f1, f2 ... . You can avoid checking a field name1, name2 ... by replacing FIELD f1 FIELD f2 with DUMMY.
After the FIELD addition, you can only specify an elementary field, not a selection table. However, there are function modules available that execute the AUTHORITY-CHECK statement for all values of selection tables. The AUTHORITY-CHECK statement is supported by a statement pattern.
Only if the user has all authorizations, is the return value sy-subrc of the AUTHORITY-CHECK statement set to 0. The most important return values are:
· 0: The user has an authorization for all specified values.
· 4: The user does not have the authorization.
· 8: The number of specified fields is incorrect.
· 12: The specified authorization object does not exist.
A list of all possible return values is available in the ABAP keyword documentation. The content of sy-subrc has to be closely examined to ascertain the result of the authorization check and react accordingly.
REPORT demo_authorithy_check.
PARAMETERS pa_carr LIKE sflight-carrid.
DATA wa_flights LIKE demo_focc.
AT SELECTION-SCREEN.
AUTHORITY-CHECK OBJECT 'S_CARRID'
 ID 'CARRID' FIELD pa_carr
 ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
 MESSAGE e045(sabapdocu) WITH pa_carr.
ELSEIF sy-subrc <> 0.
 MESSAGE e184(sabapdocu) WITH text-010.
ENDIF.
START-OF-SELECTION.
SELECT carrid connid fldate seatsmax seatsocc
 FROM sflight
 INTO CORRESPONDING FIELDS OF wa_flights
 WHERE carrid = pa_carr.
 WRITE: / wa_flights-carrid,
 wa_flights-connid,
 wa_flights-fldate,
 wa_flights-seatsmax,
 wa_flights-seatsocc.
ENDSELECT.
Regards
Hitesh

Crystal Reports for Eclipse vs. Crystal Reports Developer

We are developing a Java web application for internal use. Since we have some people at the company who are familiar with Crystal Reports, we'd like to have them write reports that we can display through our application. Crystal Reports Server seems like overkill for this project, but the <a href="http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm#en/JRC_SDK/">JRC</a> sounded like a good fit.
I have been evaluating <a href="http://www.businessobjects.com/products/reporting/crystalreports/developer/default.asp">Crystal Reports Developer</a> and trying out the <a href="http://support.businessobjects.com/communityCS/FilesAndUpdates/crxi_r2_jrc_web_samples.zip.asp">JRC samples</a>. The samples don't use the tag library. Instead, they show how to set session variables and redirect to a viewer JSP which contains a bunch of Java code to use the CrystalReportViewer.
The samples are so much more complex than the code created by Crystal Reports for Eclipse, which simply uses the tag library:
<%@ taglib uri="/crystal-tags-reportviewer.tld" prefix="crviewer" %>
<crviewer:viewer reportSourceType="reportingComponent" viewerName="myreport-viewer" reportSourceVar="myreport" isOwnPage="true">
<crviewer:report reportName="myreport.rpt" />
</crviewer:viewer>
I assume that I should be able to use the same tag library approach without using Crystal Reports for Eclipse, but I haven't seen any tutorials on it. I'm trying to understand whether I should purchase Crystal Reports for Eclipse instead of Crystal Reports Developer.
This is the difference, as I understand it:
Crystal Reports Developer gives you the stand-alone Crystal Reports Designer and the right to run the JRC on an internal server. It costs <a href="http://store.businessobjects.com/store/bobjects/DisplayProductDetailsPage/productID.40434600">$595</a>.
Crystal Reports for Eclipse Standard provides a free report designer built into Eclipse. It also includes the JRC for use on an internal server.
Crystal Reports for Eclipse Professional provides "a more powerful runtime engine" with the right to run it on one internal server. It costs <a href="http://store.businessobjects.com/store/bobjects/DisplayProductDetailsPage/productID.52068100">$495</a>. Is this the same JRC provided with Crystal Reports Developer?
If the "powerful" JRC is the same as Crystal Reports Developer's JRC, could I install Crystal Reports for Eclipse Standard to take advantage of the Eclipse integration and the built-in designer, but use the more powerful JRC from Crystal Reports Developer, which would also give me the stand-alone designer?

Hi there, If you are planning on deploying a JRC application then you should definitely be using Crystal Reports for Eclipse for your runtime engine. It is the latest version of the JRC and includes many updates not available in Crystal Reports Developer.As for "power" the JRC included in CR Developer is on par with the JRC available in the Basic edition of Crystal Reports for Eclipse. The Professional edition of Crystal Reports for Eclipse provides the most powerful version of the JRC available.With the release of Crystal Reports for Eclipse, Business Objects is setting the groundwork for separating Developer needs from the Report Author needs.A professional report author will require a professional report design tool. For these users we are recommending that they purchase Crystal Reports Professional.The developer, on the other hand, generally needs the SDKs and a toolkit to assist with building applications. We believe that these should be available at no cost to the developer, only charging when the application is deployed (in this case a CR4E Pro license). This is different from the current model with Crystal Reports Developer where we have combined a professional report designer plus the required runtime.So, to summarize, definitely use Crystal Reports for Eclipse for your application runtime and have your report authors puchase Crystal Reports Professional. If you need a more powerful engine, access to technical support or plan to deploy on multiple servers then I would recommend purchasing the Crystal Reports for Eclipse Professional license for your development purposes.As for some tutorials on creating viewer pages, the integration in Eclipse provides a very simple way of accomplishing this. I would suggest reading the section titled "Creating a New Viewer Page" in our Getting Started Guide found at the following URL:<a href="/node/320"> http://diamond.businessobjects.com/node/320</a>Let me know if you have some follow-up questions. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

Reporting in SAP HCM using Crystal Reports

We have decided to use Crystal Reports for SAP HCM Objective Settings and Appraisal component.
What will be the best option to access SAP HCM Tables using Crystal Reports?
Regards
Faisal

Hi,
I have to assume that you've followed the Admin guide and given sufficient Authorizations (as per the detailed list)
Actually, there are quite a few related notes about this, if you search in SDN or via SMP: www.service.sap.com/notes or /x-search . for example:
1334461 - After upgrading SAP R/3 ECC5 to version ECC6, the Integration Kit transport package /Crystal/BC was found in DELETED OBJECTS and Crystal ODBC connection cannot view or browse any tables
1374874 - Cannot see the SAP tables, clusters or functions in Crystal Reports
here's a suggestion:
using the Database Options:
When creating a new report, in the Database Expert window, click on SAP Table, Cluster, or Function
Log on to an SAP system
Once connected, right click on the connection created and select Options
In the Options window, in the Data Explorer area, use the Table name LIKE field to select only a subset of data.
Type the full or partial name of the tables you are looking for
Use the percentage sign (%) to denote any number of characters
Use the underscore (_) to denote one characters
Once done, click OK to accept the change.
Back to the Database Expert window, right click on the connection and select Refresh
Regards,
H

How to load data into user tables using DIAPIs?

Hi,
I have created an user table using UserTablesMD object.
But I don't have know how to load data into this user table. I guess I have to use UserTable object for that. But I still don't know how to put some data in particular column.
Can somebody please help me with this?
I would appreciate if somebody can share their code in this regard.
Thank you,
Sudha

You can try this code:
Dim lRetCode As Long
Dim userTable As SAPbobsCOM.UserTable
userTable = pCompany.UserTables.Item("My_Table")
'First row in the @My_Table table
userTable.Code = "A1"
userTable.Name = "A.1"
userTable.UserFields.Fields.Item("U_1stF").Value = "First row value"
userTable.Add()
'Second row in the @My_Table table
userTable.Code = "A2"
userTable.Name = "A.2"
userTable.UserFields.Fields.Item("U_1stF").Value = "Second row value"
userTable.Add()
This way I have added 2 lines in my table.
Hope it helps
Trinidad.

What is equivalent ASCP report for Planned Order&Order Reschedule Report

What is equivalent report for Supply Chain Planned Order Report & Supply Chain Order Reschedule Report
We are currently on MRP and running Supply Chain Planned Order Report successfully. We are planning to go to ASCP(Decentralized) next month ,what is the equivalent reports in ASCP?
Edited by: SanDan on Jan 9, 2013 1:57 PM

Hi ,
You can explore the Planning Detail Report which you can run against your ascp plan. However there are few standard reports available in ascp. I suggest you can explore option of building custom report which will be best suited to your business needs (i.e. using Discoverer or if you are also implementing obiee you can build a custom report based on standard views or noitex views (- for ascp)
Regards
narendra

Error while adding user fields to user table using vb6.0

Hi,
I am adding a user tables using vb6.0 using DIAPI.
I am able to add the user table successfully.
I am getting the following error when i am adding the fields to the table.
"The metadata object for this object cannot be updated, since it's ref count is bigger than 0."
My code is as follows:
    oUserFieldsMD.TableName = TABLE_NAME_ITEM_LOCN
    oUserFieldsMD.Name = vTableFields(0, lCount)
    oUserFieldsMD.Description = vTableFields(1, lCount)
    oUserFieldsMD.Type = vTableFields(2, lCount)
    oUserFieldsMD.EditSize = CLng(vTableFields(3,lCount))
    lRetCode = oUserFieldsMD.Add
This error does not come up when i try to add the field to my table using the vb sample provided by SAP.
Your help will me much appreciated.
Thanks.

Hi Satish,
The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
e.g
Dim pUTables As SAPbobsCOM.UserTablesMD
'Do your stuff
Set pUTables = Nothing
Dim pUFields As SAPbobsCOM.UserFieldsMD
'Do your stuff
Set pUFields = Nothing

Creating SYNONYM for all tables who don't have one at once!

Hello to all,
I'm trying to create synonyms for every table who's missing one at the moment. I'm trying this code:
declare
cursor cur_objects is
select obj.object_name , obj.owner
from all_objects obj
where owner = '&&SCHEMA_OWNER'
AND NOT EXISTS (SELECT *
FROM all_synonyms syn
WHERE obj.object_name = syn.table_name)
AND obj.object_type = 'TABLE'
AND obj.object_name LIKE 'CI_%';
begin
for rec_objects in cur_objects loop
begin
dbms_output.put_line(rec_objects.object_name);
execute immediate('create public synonym ' || rec_objects.object_name || ' for '
|| rec_objects.owner ||'.'||rec_objects.object_name )
exception when others then
null;
end;
end loop;
end;
I'm getting this error:
ORA-06550: line 10, column 37:
PLS-00103: Encountered the symbol "end-of-file" when expecting one of the following:
begin function package pragma procedure subtype type use
<een ID>
<een scheidingsteken-ID tussen dubbele aanhalingstekens> form
current cursor
I'm still pretty new at PL/SQL and can't get it to work. Does anyone got any tips ?
Thnx already

Ok now I got this error:
RA-06550: line 17, column 1:
PLS-00103: Encountered the symbol "EXCEPTION" when expecting one of the following:
* & = - + ; < / > at in is mod remainder not rem return
returning <een exponent (**)> <> or != or ~= >= <= <> and or
like LIKE2_ LIKE4_ LIKEC_ between into overlaps using ||
multiset bulk year DAY_ member SUBMULTISET_
The symbol ";" was substituted for "EXCEPTION" to continue.

POV-After creating Tcode for a table SM30 I want F4 Help here

Hi All,
After creating Tcode for a table, When I am trying to give table entries thro' this Tcode, I want F4 help for those fields. Apart form assigning "Fixed values" in Domain level how can I achieve this.
Points Assured.
Regards,
Suresh

Hi,
You need to create search helps based on this table for each filed or one for all the fields with proper import and export paramters. Or else you can give check table entries for each of the table fields for which you need the F4 help. Check table us assigned to a field using the Foriegn key assignment.
Best Regards,
Sesh

When do I really need to create indexes for a table?

Once I was talking to a dba in a conference.
He told me that not always I have to create indexes for a single table, it depends of its size.
He said that Oracle read registers in blocks, and for a small table Oracle can read it fully, in a single operation, so in those cases I don't need indexes and statistcs.
So I would like to know how to calculate it.
When do I really need to create indexes for a table?
If someone know any documment that explain that, or have some tips, I'd aprecciate.
Thanks.
P.S.: The version that I'm using is Oracle 9.2.0.4.0.

Hi Vin
You mentioned so many mistakes here, I don't know where to begin ...
vprabhu_2000 wrote:
There are different kinds of Index. B-tree Index is by default. Bit map index, function based index,index organized table.
B-tree index if the table is large This is incorrect. Small tables, even those consisting of rows within just one block, can benefit from an index. There is no table size too small in which an index might not be benefical. William Robertson in his post references links to my blog where I discuss this.
and if you want to retrieve 10 % or less of data then B-tree index is good. This is all wrong as well. A FTS on a (say) million row table could very well be more efficient when retrieving (say) just 1% of data. An index could very well be more efficient when retrieving 100% of data. There's nothing special about 10% and there is no such magic number ...
>
Bit Map Index - On low cardinality columns like Sex for eg which could have values Male,Female create a bit map index. Completely and utterly wrong. A bitmap index might be the perfect type of index, better than a B-Tree, even if there are (say) 100,000 distinct values in the table. That a bitmap index is only suitable for low cardinality columns is just not true. And what if it's an OLTP application, with lot's of concurrent DML on the underlining table, do you really think a bitmap index would be a good idea ?
>
You can also create an Index organized table if there are less rows to be stored so data is stored only once in index and not in table. Not sure what you mean here but an IOT can potentially be useful if you have very large numbers of rows in the table. The number of rows has nothing to do with whether an IOT is suitable or not.
>
Hope this info helps. Considering most of it is wrong, I'm not sure it really helps at all :(
Cheers
Richard Foote
http://richardfoote.wordpress.com/

How to create index for particular table in R3

Hi
My load is taking too much time and it leads to process over due error. Does creating indexes on table in r3 side will solve this issue? If so how can we find out on which table does this particular data source depend. I went to maintain extract structure and findout only one table is supplying data for this data source.
Is there any other factors depend to solve this.
Thanks
kk

Hi,
it will depend on the table.... Having an index created will speed up the loading but slow down the insert therefore slowing some process perhaps...
May I ask which table it is? And which fields would you need to index?
Are you sure that bottleneck is located in R/3? Analyze your loading time in the monitor and see if this is really the case.
Otherwise you can create index for a table in Tx SE11; first check if an index is not already created...
hope this helps,
Olivier.

How to create view for xmltype table in oracle

hi:
Can some one help me how to create view for xmltype table in oracle?
XMLType do not have column
Sem

Thank you !!
I read it and become very hard to implement what I want to do.
Can you give me example please?
My main goal to create view for xmltype table is to XQuery the XML data?
Do you have any other suggestion?
Please help
Ali_2

Creating reports for user tables using XL reporter

Similar Messages

Maybe you are looking for