Creating subscript or superscript in a mail response.

I am attempting to reply to an email in the MAIL App. I am having trouble making subscripts or superscripts that are required in my response. Any help would be appreciated. I am using the Yosemite Operating System.

[Updated to solve Superscript, Subscript, and Strike-through text cases. - /viking]
Mail does not offer any Superscript, Subscript, or Strike-through style capability, but you can first create them in TextEdit, and then these styles will be available in Mail.
TextEdit
Superscript and Subscript
Type the arbitrary text "ka" (without the quotes). Select the letter "a", and then choose Format > Font > Baseline > Superscript. The character levitates. On the left end of the TextEdit toolbar, there is a ¶ selector button. Click this and choose Show Styles… .
In the styles panel, you will see the superscripted letter "a" and below it, the current font info and the term Raised. Leave Document Styles selected, and simply click the Add to Favorites button. A sheet will drop down allowing you to name this style, and I suggest you call it Superscript. Leave the two checkboxes unselected, and click Add.
The "a" is still selected. You want to return this to normal, so click the ¶ style selector on the toolbar again, and choose default. Reselect the "a" character, and now choose Format > Font > Baseline > Subscript. From the preceding ¶ style selector, select Show Styles… again. This time, it says that it is Lowered. Click Add to Favorites, and name this Subscript.
Strike-through
While still in TextEdit, add and select an arbitrary word of default styled text. Choose Format > Font > Show Fonts. In the Fonts toolbar, there is a drop-down button offering single and double strike-through styles. Select Single for normal strike-through. If you want a red strikebar, choose the Color menu option, and pick red from the color chooser — before selecting Single from the strike-through menu.
Now, you have a word with a strike-through style applied. Select this word, and from the familiar ¶ style selection menu, Show Styles… again. Choose Add to Favorites, and when the naming sheet slides down, call it Strike-through, or Red Strike-through (if pertinent).
Now, Superscript, Subscript, and Strike-through are now selectable Favorites on your Show Styles menu.
Apple Mail
Select the text that you want to apply a style too. Right-click on that selected text. From the pop-up menu, choose Font > Styles… . A sheet should drop down with Favorite Styles enabled. Click on the blue-arrows adjacent to Default. Choose Superscript, Subscript, or Strike-through as appropriate. When you click Apply, your preferred style is applied to the selected text.
When you want to resume with regular text, spacebar after your effect, and then do the right-click, Font > Styles… again, and this time, click Default and Apply. You will be back to a default font baseline.

Similar Messages

Create subscriptions - hide admin notification mails for endusers?

Hi@all,
if an admin user creates subscriptions for folders and add several endusers as recipients the endusers will get an admin notification email.
How can I prevent this (means the enduser get no email)?
Thanks in adcance,
Andre
Message was edited by: Andre Kunath

Hi Andre,
You can remove the corresponding event updaterecipient under System Admin - System Config - KM - Config - CM - Repository Services - Subscription Service.
Alternatively, you could create a subscription.NONE channel (CM - Utilities - Channel Originators) with no Originator Address and selected Channel null. And then choose this Originator for the subscription service in question.
See http://help.sap.com/saphelp_nw04/helpdata/en/6e/798e04b33b11d5993800508b6b8b11/frameset.htm for details, even if the second possibility is not explained completely there.
Hope it helps
Detlev

How to put in subscript and superscript characters

Hi:
Does anyone know how to insert subscript and superscript
characters into Dreamweaver. I am doing a site for an
engineering/manufacturing firm and I am trying to create a
subscript 2 like one would see in H2O. The "2" should be small and
lower than the "H" and the "O". I've tried creating one in WORD and
cutting and pasting but that will not work and when I use the
2 code that does not seem ideal as it tends
to slightly push down the line below once the character is in and I
don't feel like changing the line spacing on the entire site. The
other thing I can't seem to do is make a tiny "Registered" ®
character. Simply cutting and pasting from WORD, the small
superscripted symbol gets made into a large ® once I paste it
in. Can anyone assist?

Add this to your CSS -
sub { position: relative; bottom: 0; left:.2ex; font-size:
80%;}
Then use the tag.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"RockingChairman" <[email protected]> wrote
in message
news:g54kt1$jan$[email protected]..
> Hi:
> Does anyone know how to insert subscript and superscript
characters into
> Dreamweaver. I am doing a site for an
engineering/manufacturing firm and I
> am
> trying to create a subscript 2 like one would see in
H2O. The "2" should
> be
> small and lower than the "H" and the "O". I've tried
creating one in WORD
> and
> cutting and pasting but that will not work and when I
use the 2
> code
> that does not seem ideal as it tends to slightly push
down the line below
> once
> the character is in and I don't feel like changing the
line spacing on the
> entire site. The other thing I can't seem to do is make
a tiny
> "Registered" ®
> character. Simply cutting and pasting from WORD, the
small superscripted
> symbol
> gets made into a large ® once I paste it in. Can
anyone assist?
>

Adobe Forms - How do I set up e-mail responses

I am an HTML web designer who has been frustrated by forms. So I purchased Adobe Forms. Extremely easy to create.
Here's what I don't understand: When someone responds, is it possible to have the e-mail response sent to the people I am creating the forms for?
I thought it would be sent to them if they were listed as a collaborator, but the e-mail notifications don't go to them.
What can I do?
Stan Hoskins

Read this FAQ: http://forums.adobe.com/docs/DOC-1424
They need to go to their Options tab and turn it on. It is something each user controls, not you.
Randy

The process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.

Hi
he process could not be created because the maximum number of asynchronous responses (5) has already been reached, and it will be dropped.
Command executed: "C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe" -command "&G:\SCOM\SCOMModule\Notification\SMS.ps1 -scomalertid:'{c5a013e7-5408-468a-9b04-febab33cc56d}' -alertname:'Common Primary Database TableSpace
Threshold Alert' -alertdesc:'TableSpace TEMP FreeSizePercent:0.4375\n' -alertstate:'Closed' -alerttime:'7/26/2014 1:55:19 PM' -Priority:'1' -Severity:'2'"
Working Directory: g:\SCOM\SCOMModule\Notification
One or more workflows were affected by this.
Workflow name: Subscription852fbf70_40eb_450c_874d_46b631ca1352
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group:******
Please help me
Thanks

Hi,
the RMS is "Root Management Server". When you install first management server it becomes RMS. The RMS is relevant in SCOM 2007x management group. You can identify which server is RMS in administration console under management server view. Look for instance
with "yes" value in "Is RMS" column.
If you have SCOM 2012x version management group create sugested registry entrys on all management servers (MS) which executes command channel.
This will surely solve your
problem.
Regards,
Ivan

Create subscription for overrided monitor

Hello guys. Have an issue:
I've created a new monitor for all Servers(Windows Server Operation System Target), set it to disabled. Then I override it to specific group with other thresholds. Alerts are going well, but e-mail do not go. Trying to create subscription from scratch, select
my monitor (which is disabled) - still mail doesn't come. Questions are:
1. If I make a subscription from alert, will this subscription apply to all server's group, to which I overrided monitor, or only server from which I created alert?
2. Can I make a subscription from scratch to this alerts (need to change description, but cannot go to next line if creating from alert)
3. How can I make a e-mail separation, depending on server group? I.e. I want alerts, generated by overrided monitor specifically for BizTalk servers group to send to BizTalk admins e-mail etc. As I understand, I need to add to subscription criteria "raised
by any instance of specific group"?

Hi,
1) As your Monitor is disabled for all Servers by default and you only enabled for the Servers where you need it the subscription will apply to all Servers where Monitor is enabled.
2) Yes you can create the subscription from scratch
3) You have to create a Subscriper for each group and configure it in the subscription. If the same Monitor is running for different Server groups with different responsible departments you have to create a subscription for each department and configure
the "raised by any instance in a specific group" Condition.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch

Is there a way to create a rule that sends and Auto Response for a shared mailbox?

I have a shared mailbox set up that receives emails that are sent to 3 different addresses:
[email protected]
[email protected]
[email protected]
I would like to create a rule that would send an auto response when someone emails one of these addresses. However, I don't want an auto response sent to [email protected] so I can't just set up an "out of office" reply for the mailbox.
Is there a way that I can create a rule to send an automated response to 2 of the 3 addresses?
Nate

Hi
we can enable the shared mailbox in ADUC and create Outlook rules for it in Outlook to achieve it. please follow these steps:
1. In Active Directory Users and Computers, right-click the shared mailbox and click Enable Account.
2. Configure the Outlook account for the shared mailbox in Outlook.
3. Click Rules > Manage Rules & Alerts.
4. Create a rule like the following format:
Apply this rule after the message arrives
Have server reply using a specific message
Except if the subject contains specific words
Select exception(s) (if necessary) of the Outlook Rule - (“except if from people or public group“)
5. Apply the auto reply rules for this shared mailbox.
Then users can receive auto reply of the shared mailbox except the exceptions we have set when they send messages to this shared mailbox.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

How to get rid of automatically created server accounts in iCal and Mail?

I have recently setup an OS X 10.6.2 Server for our small office. I got the domain name wrong in the initial install and fixed this by doing a complete clean reinstall of OS X 10.6 server (then upgrade to 10.6.2).
The problem is that one of the OS X 10.6.2 clients had been setup to talk to the server prior to the rebuild. Now on this client, I cannot work out how to get rid of or change the automatically created server accounts in iCal and Mail - everytime you login, these are recreated using the old domain name (and of course don't work).
In Mail if you remove the server account (from Accounts in Preferences), it just pops back again. I even removed every trace of the old domain name from the apple.com.mail.plist file but when I re-open Mail that darned server account (with the old domain name) just pops up again.
In iCal its slightly different in that you can remove the account and it stays away while you have iCal open. But as soon as you close and re-open it, that server account just pops up again!
I thought it might be something to do with Kerberos and found a Kerberos file on the client which had the old domain name throughout it - I changed all these references to the new domain name, but still the same behaviour in Mail and iCal.
This is doing my head in. Any ideas?
Message was edited by: davidav

I suggest you ask in the snow leopard server forum
http://discussions.apple.com/category.jspa?categoryID=264

Question: Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages? - Problem: I have 1400 e-mails with attachments that need to be conv

Is there a way to create a PDF from outlook e-mail that does not embed the attachment? better, is there a way to convert the e-mail with attachement (not embeded) as pdf pages?
- Problem: I have 1400 e-mails with attachments that need to be converted into pdf and the attachments cannot be embeded.
System: PC Windows 7 using Acrobat X Prof. - Thank you!

Hi ,
There is an option of embedding index for faster search while converting email to a PDF .
However I am not sure that will serve your purpose or not .
I would recommend you to get in touch with Microsoft support as well .
Meanwhile I'll work on it and get back to you in case I get a desired solution .
Regards
Sukrit Dhingra

How to create Subscription Schedule for a Contract created from Sales Order

Hi Gurus,
Need help in creating subscription contracts from Sales Orders.
We know that Service Contract is created from Sales Orders by adding covered item and service item as two lines in a Sales Order.
1. Does anyone know how to a create Subcription Contract by adding single item or BOM item(Model) to a Sales Order?
2. Can we have a BOM item created as Subcription item and reference this to the Service Item in the Sales Order, so that we get the Service Contract created with the BOM item as Covered line.
3. Whenever we create the Service Contracts from Sales Orders, the Billing Schedule Level is set to 'Top Level'. Can we get this changed to 'Equal Amount' by using any profile options.
Please advise as we are in a critial design phase and need to make a decision quickly.
Thanks,
Sid

Hi Mani,
I have a similar requirement but i need to transfer the values to the same page... what then. I have seen the developers giude and the example shows how to tansfer values to another page but no clues what so ever if i have to transfer them to the same page different region. Do u have any suggestions ....
Regards,
Amit.

How to create a procedure to send a mail if the Database is down?

Hi,
I have created the below procedure to send a mail if the count is less than 1300. It scheduled daily @ 15 30 hrs. Its fine.
CREATE OR REPLACE procedure SCOTT.hrsmail
is
v_count number;
begin
Select count(*) into v_count from emp;
if v_count < 1300
then
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
cc => '[email protected]',
bcc => '[email protected]',
subject => 'Testing the UTL_MAIL Package',
message => 'If you get this, UTL_MAIL package
else
null; --what you want to do here
end if ;
end;
Sometime the Database is down, so the job is not running.
How to create a procedure to send a mail if the database is down?
Pls help me. Its highly appreciated.
Thanks
Nihar

nihar wrote:
How to create a procedure to send a mail if the database is down?And what if the database is up, but the network down? Or the database up and mail server down? Or mail server undergoing maintenance?
There are loads of "+What if's+" - and in that respect, playing "+What if database is down..+" in this case does not make any sense. You do not use the database to monitor its own up/down status. You do not rely just on SMTP as notification protocol that the database is down.
The correct approach would be using something like SNMP as the monitoring protocol. A monitoring system that can process SNMP and perform some basic root cause analysis (e.g. network to the database server down, database server status unknown). And this system supporting notification methods like SMTP, SMS and so on.

Problem in Oracle CDC Create Subscription option

Hi All,
I am facing a problem setting up CDC in test environment after cloning from DEV. We are using Oracle 11g and OWB 11g2 versions.
For setting up CDC through OWB client, when we started start CDC, job throws runtime error saying error mapping function at DBMS Subscribe. I also tried to create CDC setup through scrips. My initial CDC setup is done, but when I start to create subscription, it throughs the same error as I encountered in OWB Start CDC. Not sure if it is some error with DB configuration or Package itself.
Here is the relevant details.
SELECT * FROM CHANGE_SETS;
PR10TEST HOTLOG_SOURCE 19-OCT-13      Y 19-OCT-13
So, Change Set does exist along with Change Source as HOTLOG_SOURCE which is active. Now I want to create subscription as shown below. Command is run from Publisher schema
BEGIN
DBMS_CDC_SUBSCRIBE.CREATE_SUBSCRIPTION(
      change_set_name => 'PR10TEST',
      description => 'Common subscription ',
      subscription_name => 'PR10TESTNew'
END;
Error starting at line 74 in command:
BEGIN
DBMS_CDC_SUBSCRIBE.CREATE_SUBSCRIPTION(
      change_set_name => 'PR10TEST',
      description => 'Common subscription ',
      subscription_name => 'PR10TESTNew'
END;
Error report:
ORA-06521: PL/SQL: Error mapping function
ORA-06512: at "SYS.DBMS_CDC_ISUBSCRIBE", line 104
ORA-06512: at "SYS.DBMS_CDC_SUBSCRIBE", line 120
ORA-06512: at line 2
06521. 00000 - "PL/SQL: Error mapping function"
*Cause:    An error was detected by PL/SQL trying to map the mentioned
           function dynamically.
*Action:   Check the stacked error (if any) for more details.
I am stuck up here. I even tried to recompile CDC package but no luck.
Please provide your inputs. Thanks in advance.

Perhaps the CDC Healthcheck script from Metalink/MyOracleSupport can be of help:
Change Data Capture CDC Healthcheck. (Doc ID 983443.1)
Script gathers information about the CDC setup to help manage/troubleshoot CDC.

Creating html email with apple's mail

How do i get an html page (created in Dreamweaver) to show up in apple's mail window?
I want the html page to display. If I just attach the html file all I get is an icon of the file not the look of the html file (ie with background color and placed photo and html text). I know to have the placed image with an absolute reference (ie. http://www.whatever.com/image.jpg)

Tiger Mail uses Apple's new WebKit authoring engine, creating complex HTML email messages with Mail's trademark simplicity. However, most of the power of that engine is inaccessible. Aside from the addition of an "Add Hyperlink…" menu item, Mail's composition window offers no better text or layout controls than 10.0's Mail did in 2001.
Tiger was replaced by Leopard last October, and Leopard Mail has a new feature called Stationery which might provide some of what you are talking about:
http://www.apple.com/macosx/features/mail.html

Can I Create A Note In iPad's Mail app?

Hello all.
On a Mac, I can create a (new) Note inside the Mail application. And with MobileMe, it is sync throughout all my Macs and also web-based.
*How do I create a (similar) new Note on the iPad?* Or I can't?
Thanks and cheers

No. But there is a separate Note app on the iPad.
from the iPad Users Guide:
Syncing Notes
You can set iTunes to automatically sync your notes with some email applications.
See “Syncing with iTunes” on page 28.
There is really nothing on page 28 but page 31 syas:
Sync notes in the Notes application on iPad with notes in Mail on a Mac or with
Microsoft Outlook 2003 or 2007 on a PC.

Can't create subscription

Dear colleagues, hi
Could you please help us with one case.
We faced with a problem working on Sybase RS 12.6 and ASE 12.5.4
I have WarmStabdBy replication but now I want create replication definition and subscription on one table.
In all manual I read what I can do it.
(SyBooks Online)
In manual write
"If the primary database is part of a warm standby application, data_server.database is the name of the logical data server and database."
For replication definition and subscription.
I have logical connection test.DB
My Scripts
create replication definition RD_pSwiftLine12
with primary at test.DB
with all tables named "pSwiftLine11"
SPID int,
Number int
primary key ( "SPID", "Number")
go
And replication definition created.
But when I create subscription with the same logical connection test.DB
define subscription SR_pSwiftLine12
for RD_pSwiftLine12
with replicate at test.DB
with suspension
go
I had error
The replicate database 'test.DB' for subscription 'SR_pSwiftLine12' is the
same as the primary database for the replication definition 'RD_pSwiftLine12'.
This is not allowed.
May be somebody know how I make create subscription for WarmStandBy.
Because when I use another name in "with replicate at...." a had error,because all server use in WarmStandBy.
Interesting string with
"with replicate at...."
What write?

on your first question
I want create a repdef/sub on a particular table because i had very strange error.
Some time my replication lose 1 transaction(delete on 1 table),(not every operation).
And I don't know HOW???))
And I solved change sheme(I know during the work with repdef/sub sheme working RS some change).
About question
I read:
(SyBooks Online)
Although subscriptions are not used in replicating from the active to the standby database, you can:
Create subscriptions for the data in a logical primary database, or--------- I want to execute this option
Create subscriptions in order to replicate data from other databases into a logical replicate database.
The create subscription and define subscription commands use the logical database and data server names instead of the physical names.
I have(result admin who)
17 DSI EXEC   Awaiting Command     101(1) test_ASE_RSSD.DIAS_RS126_RSSD--connection for rssd
11 DSI        Awaiting Message     101 test_ASE_RSSD.DIAS_RS126_RSSD--connection for rssd
   8 SQM        Awaiting Message     101:0 test_ASE_RSSD.DIAS_RS126_RSSD--connection for rssd
10 SQM        Awaiting Message     119:1 test.DB-----logical connection
   9 SQM        Awaiting Message     119:0 test.DB-----logical connection
18 DSI EXEC   Awaiting Command     135(1) test.diasdb1--physical connection
12 DSI        Awaiting Message     135 test.diasdb1--physical connection
30 REP AGENT Awaiting Command     test.diasdb1--physical connection
23 DSI EXEC   Awaiting Command     136(1) test.diasdb2--physical connection
24 DSI EXEC   Awaiting Command     136(2) test.diasdb2--physical connection
25 DSI EXEC   Awaiting Command     136(3) test.diasdb2--physical connection
26 DSI EXEC   Awaiting Command     136(4) test.diasdb2--physical connection
27 DSI EXEC   Awaiting Command     136(5) test.diasdb2--physical connection
13 DSI        Awaiting Message     136 test.diasdb2--physical connection
When I create WarmStandBy I use scripts:
create logical connection to test.DB
create connection to test.diaыsdb1
set error class to rs_sqlserver_error_class
set function string class to rs_sqlserver_function_class
set username to t_rs
set password to 654321
with log transfer on
as active for test.DB
go
create connection to test.diasdb2
set error class to rs_sqlserver_error_class
set function string class to rs_sqlserver_function_class
set username to t_rs
set password to 654321
with log transfer on
as standby for test.DB
use dump marker
go
I have only WarmStandBy replication and I want create repdef/sub on a particular table.(with active and standby database)
Can I do it?
(with physical connection I can't do it )

Creating subscript or superscript in a mail response.

Similar Messages

Maybe you are looking for