Creating two-level dvd menu with Elements 9

Hi,
I am trying to burn a DVD (and later on Blu-Ray) using PRE 9. I can burn using a provided menu-template.
However, I would like to create a two (or multi) level menu for the disk. I would like to make the menu
look like this:
Play all
Year 1
Scene 1A
Scene 1B
Main Menu
Year 2
Scene 2A
Scene 2B
Main Menu
Year 3
I would like to burn DVD and Blu-ray disks with such menus.
How can I create such menus using Premier Element 9?
Thanks!
MKG

MKG
I am not clear on what you mean by a "two level DVD menu".
Premiere Elements disc menus come as a set of main menu and scene menus. But, it is possible to have the menu situation present with one main menu.
Apparently you want to have a Timeline of multiple movies, have the viewer select the one to watch first, and then, at the end of the movie selected, have the viewer taken back to the main menu. That all can be accomplished for DVD-VIDEO on DVD disc with the placement of stop marker at the end of each Timeline movie (except the last one). Each movie could have a scene marker at its beginning which will trace to a scene button in the scene selection page. But, there is a sacrifice in doing this. This scenario does not permit for a functional "Play All".
http://atr935.blogspot.com/2013/09/pe-dvd-menu-navigationplay-all-loss.html
In addition, the above is not applicable to AVCHD format on DVD disc or Blu-ray disc format on Blu-ray disc (with stop markers) because the players for those discs do not support stop markers.
Please review the above and then we can discuss the matter further.
Thank you.
ATR

Similar Messages

Can you create a custom dvd menu with Premiere Elements 12?

I am giving this software a trial before deciding whether to buy. Is it possible to create your own custom DVD menu? I understand that you can "download" a template and customize it to some extent. But the customizing does not seem to allow you to delete or add elements, like graphics or menu buttons. I want to be able to delete graphics/menu buttons I don't want, as well as add or subtract buttons as I need for each project. Or, I would like to create a menu from scratch.
Is either method possible in Premiere Elements? Thank you for any assistance.

Kanten
Thanks for the reply.
You can go with a one main menu set up and use main menu buttons. But, note that there are typically far less buttons on the main menu than on the scene menu. One maneuver is to switch the main menu with the scene menu to gain a buttons per page advantage. That is done by reversing the file names of the main menu .psd and scene menu .psd.
At the editing of the .psd level, there is also the choice to add more buttons per page to a scene menu and create text or thumbnail scene buttons.
One of the principles to keep in mind...no one movie in a multi movie Timeline can have its own Scene Menu page.
Of concern....you should have more flexibility than
In any case, I have discovered that I can edit the templates and then bring them into my project. So long as I save them as the same name, Adobe Premiere Elements doesn't realize that anything has changed.
Are you following any one of my blog posts. If so, please let me know which one so I can focus in where you may be overlooking some detail. It is best to work with copies of the original and place them in appropriate folders in the directory structure. In doing that I give the user created menu a new name to distinguish it from the original.
And, in versions 11 and 12, I do not like to save user modified menus in the Online Folder. I prefer the location where the disc menu installed with the program is located. See blog posts.
If your customization does not require the opening of Layer Sets in the Layers Palette of the .psd file (happens under certain plans), Photoshop Elements can do the .psd edit job for you, and you do not have to go to Photoshop CS or higher. There are Photoshop actions that might be used in Photoshop Elements to open Photoshop Layer Sets (as found in the disc menu .psd files), but I will not get into that right now.
Please review and consider. And, then we can go into more details.
Thanks.
ATR

Creating a simple DVD menu with text as buttons...

Hi, I am rather new to DVDSP but fairly accomplished at the software designers earlier product, DVD Virtuoso (still use it). Can anyone tell me where there is a tutorial to create a simple text DVD menu? I would like to place a colored rectangle (opacity) behind the text to help it stand off the background and have access to some fairly basic text tools like Bevel & Emboss, Stroke and Drop Shadow. Thank you.

http://discussions.apple.com/thread.jspa?messageID=2082015&#2082015
http://discussions.apple.com/thread.jspa?messageID=2601618&#2601618
Has some discussion and examples I posted elsewhere which should help get you going. Best to do graphics in Photoshop, then make sure all text/layers rasterized, then make them flattened picts. One will be background layer, the other grayscale overlays to map colors (these examples should start you off I think)
PS I know Hal has a great example with better step by steps, and if I get a chance later I can also fill in details on what I did

Can I create my own DVD menu with Encore and a trial version of Photoshop?

I am finishing up a movie project and would like to create my own menu background. I guess I need Photoshop for this but don't want to purchase the app just for one little part of my project. Does anyone know if it is possible to create a "Photoshop file" sufficient for what I would need (in Encore for the menu background) but with using a TRIAL version of Photoshop?
Thank you!!

Ahk wrote:
Some tutorial video said the file had to be saved in Photoshop...
encore has some ok menu templates,
but for a slick, customized menu, photoshop (saved as .psd) is the way to go!!!
hahahahahahahahahaha!!!

Final cut pro x dvd menu with personal backgrounds and music?

is it possible to create with Final cut pro x dvd menu with personal backgrounds and music?

THANKS Tom! I miss my NERO... ;-) ... At least personal background... Can you burn the DVD then directly from final cut or do I need another program to burn...? Cheers...

How to create two level dynamic list using JSP , Java Script and Oracle

I am new in JSP. And i am facing problem in creating two level dynamic list using JSP ,Java Script where the listdata will come from Oracle 10g express edition database. Is there any easy way in JSP that is available on in ASP.NET.
Plz response with details.

1) Learn JDBC API [http://java.sun.com/docs/books/tutorial/jdbc/index.html].
2) Create DAO class which contains JDBC code and do all SQL queries and returns or takes ID's or DTO objects.
3) Learn Servlet API [http://java.sun.com/javaee/5/docs/tutorial/doc/].
4) Create Servlet class which calls the DAO class, gets the list of DTO's as result, puts it as a request attribute and forwards the request to a JSP page.
5) Learn JSP and JSTL [http://java.sun.com/javaee/5/docs/tutorial/doc/]. Also learn HTML if you even don't know it.
6) Create JSP page which uses the JSTL c:forEach tag to access the list of DTO's and iterate over it and prints a HTML list out.
You don't need Javascript for this.

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen?

Is there a way to create a drop down menu with an automatic answer dependent on what is chosen? An if-then statement perhaps? I am looking to add over 100 drop down options and would like to have a message automatically pop up depending one which option they chose. Thank you.

Hi,
You would use the skip logic to conditionally show form items based on the selection within the drop-down menu. Here's a link to a description of the feature in our help documentation:
http://help.adobe.com/en_US/formscentral/using/WSd789abd336388b1642c7fce012da94afe4f-8000. html#WS0faeceb8c23f5d60-774f03e3131ddc76d7d-8000
Regards,
Brian

How do I create a drop down menu with multiple items in Adobe Acrobat 9?

I am trying to create a drop down menu with four items within a field box. When I try to do this
the font is too big and it just doesn't fit.

You can use panel widget to create manual menu where set to show target on rollover.
Something like this :
http://muse.adobe.com/exchange-library/menu-vertical-accordion-widget-1
http://muse.adobe.com/exchange-library/tiptop-navigation-menu
Thanks,
Sanjit

Can I create a custom DVD menu in Premiere Pro 2.0?

I like the templates I have, but is there a way I can create a custom DVD menu in PP 2.0?

I would also suggest using the same general naming conventions for your Main and Scene Selection Menus. Names, like this: NTSC_abstract_s_mm.psd and NTSC_abstract_s_sm.psd. In this case, I would change the word "abstract" to indicate your Project, or similar.
Also, in PrPro 2.0, your Menus will be in Adobe Premiere Pro 2.0\DVD Templates\[Your New Folder].
Good luck,
Hunt

How to create a random dvd menu

Hi everyone. I"m a newbie to apple fcp and i've been completely impressed with all of it's capabilities. I've been looking into doing a random dvd menu with scripting but have been unable to make it work. What I mean by that is a menu that has 3 or 4 different backgrounds/motion menus it skips around on the initial start rather than one that always comes up, this menu would alternate between menus. Almost like just changing backgrounds for the viewer so that it's not always the same. I've seen this with dvd's like starwars 3 dvd and others. Can anyone help direct me to some resources? All I've been able to find on this was in the dvd pro manual.
I really appreciate any help I can get! Thanks!
-Bob

Thanks so much for your advice. I"m looking into just how to implement this script/counter code but not having much luck - I"m totally new to dvd studio pro and FCP. I just learned easter eggs last week though, so i'm getting there. Can you step me through this script creation process? If not don't worry i'll figure this out eventually somehow. I have my 4 different menus and a blank script and i've been looking at all my options. How do I implement your script in DSP4? Do I do a command for everyline of your code? or is there somewhere to write all of that?
-Bob

Create two different iCloud accounts with 2 iPhones (family plan)?

How do I create two different iCloud accounts with 2 iPhones (family plan). Both phones are registered under my name, and when my wife set up her phone with iOS 5, it will only let her log in using my account. I thought it used your iTunes account info, is this not the case? I really want her to have her own seperate account on her phone.
--Brian

I resolved it by using our seperate apple ID's. Since we already had our own itunes accounts I canceled iCloud on her phone that was using my account and logged in with hers. I did read somewhere where you can have multiple iCloud accounts under the same user ID but I'm not sure how that works because that is exactly how ours were set up initially and all the suddon all of her contacts and calendar items were on my phone and iPad and vica-versa . It was a pain to remove them one at a time after I broke the accoutns apart. I know that doesn;t really answer your question, but that was my workaround. Of course that also mean no app sharing.

DVD Menu with Two or More Highlights per Button

I have created a DVD Main Menu in Photoshop CS4 Extended for Premiere Elements 4 as well as editing an existing Premiere Elements 4 DVD Main Menu in Photoshop Elements 6 and run into the same following highlighting problem:
The design of each menu button is such that there is in its Group:
a. the (%) video for the thumbnail of the video (4:3 solid color block)
b. frame to go around the thumbnail
c. Text to go under the framed thumbnail
When I roll the cursor over the button, I want the frame as well as the text to be highlighted. I can achieve one or the other, but not both. I use (=1) for the Text highlight and (=2) for the frame frame, but, no matter what combination or arrangement of layers/layer sets/codes, the result is the same, one or the other (using =1), but not both (using =1 and =2).
Although an Encore DVD Menu creation tutorial suggests that the code species (=2) exists, I have yet to find an existing Premiere Elements 4 DVD Menu where both the frame and the text underneath the frame is highlighted at the same time when the cursor is rolled over the button (showing the =1 and =2 codes or anything else)
I would appreciate any comments on whether I am looking for something that is not possible OR whether I have just not figured out the how to answer.

Hunt,
When you create your DVD menus with Photoshop and Encore as described, can these menus be loaded into Premiere Elements 4 or any other version of Premiere Elements and do these menus work in Premiere Elements 4 or any other version of Premiere Elements?
If I cannot go the (=2) highlight route, I have thought about creating a text layer (for the title under the thumbnail), simplifying (rasterizing it), then adding a the frame to that layer, and then coding the layer (=1) highlight. But, I have not done that yet.
SG
Did you really mean ...., named (%) Highlight....in your suggestions or did you mean (=1). I have been through all the how tos and have a good handle on the conventions, except for this one point.
Thank you both. In the final analysis, at this point it is more a "why can't I" instead of "I have to have that dual highlight" to make the effect work. Thank you both for your inputs and am heading back to the programs to explore your helpful suggestions.

Looking for a way to create a pop-up menu with two sub-layers

I'm looking for a solution in Fireworks CS3: creating a
pop-up menu which goes two deep instead of the standard one-deep.
TOP LEVEL > SECOND LEVEL > THIRD LEVEL
Does anyone know if this is possible?
Thanks!

http://www.projectseven.com/
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Jim Babbage .:CMX:. & .:Adobe Community Expert:."
<[email protected]> wrote in message
news:ga4amp$4ci$[email protected]..
> paulkirtley wrote:
>> I'm looking for a solution in Fireworks CS3:
creating a pop-up menu
>> which goes two deep instead of the standard
one-deep. TOP LEVEL >
>> SECOND LEVEL > THIRD LEVEL
>>
>> Does anyone know if this is possible?
>>
>> Thanks!
>>
> Please don't so this in FW. FW is primarily a web
graphics and prototyping
> tool, not a web page creator. There are better options
out there, both
> free and commercial.
>
> Check out Project Seven for several options in this
area.
>
> --
> Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
>
http://www.communityMX.com/
> CommunityMX - Free Resources:
>
http://www.communitymx.com/free.cfm
> ---
> .:Adobe Community Expert for Fireworks:.
> Adobe Community Expert
>
http://tinyurl.com/2a7dyp
> ---
> See my work on Flickr
>
http://www.flickr.com/photos/jim_babbage/

Premiere 9: Create DVD menu with several movies

I want to put several movies which I created on one DVD. How do I do this? I found a way to put ONE movie in the menu with its scene selection (although I can't get that to work, which is a separate issue), but I haven't found a way of pullling in the FOUR movies.

You can look at the Duration of each Project's Timeline and jot down the total runtime for each. Add those together to get the full runtime/Duration of the multiple Projects. If you have already Exported/Shared to a DV-AVI, you can get that Duration for each with G-Spot, or another similar utility. If you have already Imported those DV-AVI's into the new, combined Project, just look at the Duration on the Timeline Ruler.
Good luck,
Hunt
PS - When working with TimeCode (00;00;00;00 - Hours; Minutes; Seconds; Frames), I really like the free WFT Timecode Calculator. It also allows one to choose the FPS of the base.
PPS - One can also play the resultant DV-AVI's in WMP, VLC, MediaPlayer Classic HC, or other players, and see what the Duration of each is.

PE7 Loops forever generating DVD Menu with Blue Notes template

I have observed that PE7 will loop forever while generating the DVD Menu (when the target is either a DVD or a directory). This will always happen when using the Blue Notes template if there are more than one main menu markers in the video to be produced. It does not happen if there are one or no main menu markers. It also does not happen with other menu templates. I've confirmed this problem on multiple computers even after a fresh install of PE7.
It starts to loop after all the media has been processes right at the beginning of the write to the DVD or directory.
Where can I get a Blue Notes template that works properly?

I don't think a screen capture will help. The problem happens with any test file that has two main menu markers on it. This causes the blue notes template to duplicate the main menu with one marker on each. If it makes a difference, I'm using a 16:9 aspect ratio for the video project.
My Blue Notes _mm template is dated 9/16/08 and is 3,855,333 bytes (same as your 3.765 KB in the explorer view). This happens with or without any scene menu(s) present. My guess is a bug in the Blue Note main template.

Creating two-level dvd menu with Elements 9

Similar Messages

Maybe you are looking for