Creating user through ifsmanager

Hi,
I am creating user through ifsmanager.Only if I make them admin enabled they are able to log in to the ifs.
If I dont give them admin privilege they are not able to login into the ifs.
I just want to make an ordinary user with no admin privileges so that he could just log on.
Also he should be able to view only /home folder and nothing else.
Thanx
-Vipul

Vipul,
I suggest you have a quick read of the Admin Guide - in particular starting / configuring / accessing our out-of-the-box protocol servers.
To use the 9iFS/CM SDK FTP server, you will need an FTP client.
To use the 9iFS/CM SDK SMB/NTFS you will need an appropriate SMB client such as that shipped with Windows.
You need to ensure that you have started the servers up, and be aware of the ports they are running.
Please read the admin guide first though :)
Matt.

Similar Messages

How To Create User through Pl SQL Block

Want to create user from pl sql block using dynamic SQl. Used dbms_sql package . But when I run the block it does not recognises the parameter v7 which is a constant in dbms_sql package. Message displayed is Can not access parameter from package being restricted procedure.
Is there any method to create user through PL SQl block

hi ranjit,
hope this will work
declare
uname varchar2(30):=&uname;
pword varchar2(30):=&pword;
begin
execute immediate ('grant connect, resource to '| |uname| |' identified by '| |pword);
end;
regards

Unable to created users through UME on portal with AS ABAP as its data sorc

Hi,
Unable to created users through UME on portal with AS ABAP as its data source.
I have assigned SAP_BC_JSF_COMMUNICATION to the user SAPJSF but this only helps in editing the already existing users but not in creating new users on portal.
I have checked that that the role SAP_BC_JSF_COMMUNICATION is properly generated and has * in all authorizations. I have even assigned SAP_ALL and SAP_NEW to SAPJSF and another ID.
DO we need to make any config changes to make the database writable from portal. Please advise.
Thanks,

Hi,
If your system is a AS ABAP + +JAVA System,, you have to do the following
1. Login to Client 001 using SAP GUI
2. Create a user id
3. Login to portal and you will be able to see the user.
4.Assign him the portal rights
If you want the portal to use seperate Database for USers, there is a setting in Visual admin, that you can change for the same, but i dont remember that

URGENT: issue while creating user through reconciliation of AD

Hi,
We have a requirement where we need to create users in IDM through reconcilition against Active Directory. For certain type of account Ids I want to trigger a custom workflow used for user creation. So I set "viewOptions.Process" to my custom workflow in the user form assigned to the admin who is the proxy admin for the reconcilaition process. But it doesn't seem to kick off my custom workflow. Will this work? Is this the correct form to specify the custom workflow to be triggered?
Also I tried putting some trace satements in the default "Create User" workflow to see that if it is being called during user creation by recon. In the logs I don't see my trace statements. So the question is: Which is the workflow that is called when a user is created through reconciliation? How to specify a custom workflow name in this regard?
Thanks,
kIDMan.

I'm wondering if you have an answer to this?
I need to do a similar thing. For me, I reconcile against an oracle DB and there are Active and Inactive users. I only want to reconcile Active users. I put the following code in the user form but it still created Inactive users. "Exclude Inactive User" is an empty WF that has only start and end activities.
<Field name='viewOptions.Process'>
<Expansion>
<s>Exclude Inactive User</s>
</Expansion>
<Disable>
<neq>
<ref>global.status</ref>
<s>I</s>
</neq>
</Disable>
</Field>

Sam error while creating users through sim

Hi
We have protected sun identity manager with sun access manager.We have a custom workflow for user creation ijn SIM but user creation fails with following error
java.lang.NoClassDefFoundError: com/iplanet/am/sdk/AMGroup
this seems like sam error, can someone please tell me how can i resolve this.
regards
karthik

Hi
We have protected sun identity manager with sun access manager.We have a custom workflow for user creation ijn SIM but user creation fails with following error
java.lang.NoClassDefFoundError: com/iplanet/am/sdk/AMGroup
this seems like sam error, can someone please tell me how can i resolve this.
regards
karthik

Creating user in oracle through JDBC

I m trying to create a user in oracle through jdbc. When I m creating user through SQL plus I m able to do it successfully but when I m doing it through java code I can see that user�s entry in dba_users & dba_role_privs tables.But when I am trying to drop that user I get message �User doesn�t exist�. Also when I am trying to logged in through the newly created user (one that I have created through code)in SQL Plus , I get error �ORA-01017: invalid username/password ; logon denied�.If user doesn�t exist then how can I see it�s entry in dba_users & dba_role_privs?? One more thing �. I can drop that user through code but not using SQL Plus.
This is the code�.In this code I have logged in using system-manager & I m trying to create user test88 with password test88.I am granting 3 roles to this user Connect , Resource & DBA same as Scott �Tiger. Please help.
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
import java.sql.Statement;
public class OracleDB1 {
public static final String isSUCCESS = "SUCCESS";
public static final String isORACLE = "ORACLE";
public static final String isFail = "ERROR";
public String dbDriver;
public String dbURL;
public String dbUserName;
public String dbName;
public String dbPassword;
public String dbType;
private Connection con;
private Statement stmt;
* @param s Username
* @param s1 Indentified by
* @param s2 tablespace
* @param s3
* @return
* @throws SQLException
* @throws ClassNotFoundException
public String createUserOracle(String s, String s1, String s2, String s3)
throws SQLException, ClassNotFoundException {
System.out.println("Creating user method ");
String s4 = "";
if (!s2.equals("")) {
if (!s3.equals("")) {
s4 = new String("CREATE USER \"" + s + "\" IDENTIFIED BY \""
+ s1 + "\" DEFAULT TABLESPACE " + s2 + " QUOTA " + s3
+ " ON " + s2);
else {
s4 = new String("CREATE USER \"" + s + "\" IDENTIFIED BY \""
+ s1 + "\" DEFAULT TABLESPACE " + s2
+ " TEMPORARY TABLESPACE TEMP QUOTA UNLIMITED ON " + s2);
else {
s4 = new String("CREATE USER \"" + s + "\" IDENTIFIED BY \"" + s1
+ "\"");
try {
con = this.init();
System.out.println("The new user statemeent " + s4);
stmt = con.createStatement();
System.out.println("The new user statemeent " + s4);
stmt.execute(s4);
System.out.println("the info success "+stmt.SUCCESS_NO_INFO);
stmt.close();
} finally {
if (null != con) {
con.close();
return "SUCCESS";
public String grantRightsOracle(String s)
throws SQLException, ClassNotFoundException
String s1 = new String("GRANT connect , resource , dba to \"" + s + "\"");
try
con=this.init();
stmt = con.createStatement();
System.out.println("granting "+s+"with the connect priveleges");
stmt.execute(s1);
stmt.close();
finally
if(null != con)
this.close(con);
return "SUCCESS";
public Connection init() throws SQLException, ClassNotFoundException {
System.out.println("initialising");
Class.forName("oracle.jdbc.driver.OracleDriver");
dbURL = "jdbc:oracle:thin:@localhost:1521:priya";
con = DriverManager.getConnection(dbURL, "system", "manager");
return con;
public void close(Connection connection) throws SQLException {
if (!connection.isClosed()) {
connection.close();
public String disableUserOracle(String s) throws SQLException,
ClassNotFoundException {
String s1 = "REVOKE CONNECT, RESOURCE, SELECT ANY TABLE FROM \"" + s
+ "\"";
try {
con = this.init();
stmt = con.createStatement();
stmt.execute(s1);
stmt.close();
} finally {
if (null != con) {
this.close(con);
return "SUCCESS";
public String deleteUserOracle(String s) throws SQLException,
ClassNotFoundException {
String s1 = new String("DROP USER \"" + s + "\" CASCADE");
try {
con = this.init();
stmt = con.createStatement();
stmt.execute(s1);
stmt.close();
} finally {
if (null != con) {
this.close(con);
return "SUCCESS";
public static void main(String args[]) {
String s = "";
OracleDB1 oracleoperations = new OracleDB1();
try {
System.out.println("creating user");
s = oracleoperations.createUserOracle("test88", "test88", "", "");
System.out.println("creating user is " + s);
s=oracleoperations.grantRightsOracle("test88");
System.out.println("granting rights" + s);
//s=oracleoperations.deleteUserOracle("test88");
//System.out.println("deleting user" + s );
} catch (Exception exception) {
exception.printStackTrace();

I read that by default, JDBC uses an operation mode called auto-commit. This means that every update to the database is immediately made permanent.Still for this program I have tried connection.commit() also , Still it is not working.
I think that problem is not with commit otherwise I shouldn't be able to see that newly created user entry in these tables from Sql Plus:-
1)DBA_ROLE_PRIVS
2) DBA_USERS
3) DBA_sys_privs
Ya but these is no entry in DBA_OBJECTS table for this user.

Logging correct user name when creating users

I wrote a function that creates users through a portlet in version 3.0.9.8.4 It works fine except for logging who created the user. The schema where the functions and procedures are used gets updated in the wwsec_person$.created_by_dbuser field. The created_by field comes up as 'PUBLIC'. How can this field be updated through an API. The add_portal_user procedure has a p_db_user parameter, but that doesn't appear to work; whatever I put in that field doesn't show up anywhere.
How can I pass the user_name who's creating the user in my function so it updates the wwsec_person$.created_by field? Or please tell me if it can't be done; then what does the add_portal_user.p_db_user param do anyway?
Thanks,
Rick

Hi,
Every portal user is mapped to a DB schema. Many portal users can be mapped to one DB schema. The p_db_user is the name of the DB schema. The portal user has the DB privileges of the p_db_user or DB schema. The created_by is automatically taken to be the DB schema of the portal user logging in.
Thanks,
Sharmila

OOTB create user is not working for AD

Hi,
While creating the user am getting the following error.
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeVariableMappings - Data: adv name - Value: PasswordNeverExpires
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeVariableMappings left.
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: Variable Name - Value: PasswordNeverExpires
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: MapTo - Value: Process Data
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapQualifier - Value: Password never expires
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapValue - Value: UD_ADBURG_NEVER
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sVarDataType - Value: Boolean
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapOldValue - Value: 0
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getRunTimeValue - Data: sMapChildTableName - Value:
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getDataSetFieldValue entered.
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getDataSetFieldValue - Data: psFieldName - Value: UD_ADBURG_NEVER
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/getDataSetFieldValue - Data: psMapSourceDataType - Value: Boolean
[6/1/11 0:33:28:153 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,153,[XELLERATE.ADAPTERS],tcAdpEvent/getDataSetFieldValue poDataSet is null
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem entered.
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: event - Value: adpADCSCREATEUSER
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: New Status - Value: R
[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: SchData - Value: {2}
*[6/1/11 0:33:28:157 EDT] 00000037 SystemOut O DEBUG,01 Jun 2011 00:33:28,157,[XELLERATE.ADAPTERS],Class/Method: tcAdpEvent/updateSchItem - Data: Reason - Value: Exception java.lang.NullPointerException was thrown in adapter "ADCS Create User". The Adapter Response was "null"*
NOTE:
Am creating user through the access policy, it throwing the above error for auto provisioning…
IF open (edit) process form of AD and click on save (w/o changing the process data) and retrying the crate user task it working .
Advance Thanks..

This is typically the result of the checkboxes on the form. You need to give a default value of 0 or 1 either using the Default option, or prepopulate. If you do not fill this in, when the form is completed through auto-save, it will have a null value.
-Kevin

How to create user in Oracle 11g Console Administration through browser

Hi
I installed Oracle 11g on my Windows XP system
then i opened the console through IE 8.0 using the address "https://serversys:1158/em"
then i logged into this console by the username SYS/SYS@orcl as SYSDBA
then i opened the SCHEMA tab
but here i didn't found any link like "USERS" to create/manage users
How can i create the users..?
thanks in advance
jk

user10922309 wrote:
Yes, Hans i am planning to become a DBA from India.Good. If you ever move to North America to become a DBA, let us know. >:)
With the help of your link "admqs_administer_users.htm"
i found that bold "Users" link in "Server" tab bold
but right now i am getting the error "ora-01301: insufficient privilages"
then i granted the 'create user' privilege to SYS
error is coming..If you have properly logged on as SYS, as shown by the 'Logged in as SYS' note in the upper right corner, you should not be getting the 1301. Try logging out and following the steps in the document I gave you starting at chapter 1.

Strong concerns about creating users programatically vs. through Portal GUI

Hi,
I am working with a Portal install right now where we have created some portal users through the Portal GUI, and some users using PORTAL30_SSO.WWSSO_API_USER_ADMIN.CREATE_USER procedure.
The strong concerns come when I select the USER_NAME from WWSEC_PERSON$ connected as PORTAL30, and I only get the users created through the portal GUI.
However, if I connect as PORTAL30_SSO I get all the users created programatically, as well as the users created through the GUI.
Is there a reasonable explanation for this?
Thanks.
null

Daniel,
I was in the same quandry. But, you will notice a record automatically created in portal30's wwsec_person$ table, when the user logs in the first time. It is almost as if the Login server checks for the existence of the record. No one in Portal Dev. confirmed this, but it seems like the most logical explanation. Try it. Create a user programmatically, you should see the new user in SSO, but not in portal30. Login as the new user and then see the diff.
hth
Sanjay

Creating user account and setting password in Solaris9 through shell script

I need to create and set password of user through shell scripts.
User can be added successfully through "useradd" command but password cant be set through "passwd" command in script.
Is there any other alternative for the same.

Hi,
Did you get the answere for this ? I have the same problem as urs , like I want to creat the users by using useradd and want to hardcode there password in one script.
But I cant use expect utility which would have made my work easier

Error while creating user on Unix through OIM timeout waiting for user password

Hello all ,
we made integration with Unix using connector , while creating user we receive the following error
<Jun 27, 2013 1:30:14 PM AST> <Error> <ORACLE.IAM.CONNECTORS.ICFCOMMON.PROV.ICPROVISIONINGMANAGER> <BEA-000000> <oracle.iam.connectors.icfcommon.prov.ICProvisioningManager : createObject : Error while creating user
org.identityconnectors.framework.common.exceptions.ConnectorException: Exception occured while setting the password.org.identityconnectors.framework.common.exceptions.OperationTimeoutException: Command timed-out while waiting for: new[\s](unix[\s])?password:
        at org.identityconnectors.genericunix.GenericUnixConnection.setUserPassword(GenericUnixConnection.java:866)
        at org.identityconnectors.genericunix.operation.GenericUnixCreate.setUserPassword(GenericUnixCreate.java:193)
        at org.identityconnectors.genericunix.operation.GenericUnixCreate.analyzeResult(GenericUnixCreate.java:233)
        at org.identityconnectors.genericunix.operation.GenericUnixCreate.createOp(GenericUnixCreate.java:180)
        at org.identityconnectors.genericunix.operation.GenericUnixCreate.create(GenericUnixCreate.java:111)
        at org.identityconnectors.genericunix.GenericUnixConnector.create(GenericUnixConnector.java:200)
        at org.identityconnectors.framework.impl.api.local.operations.CreateImpl.create(CreateImpl.java:80)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at org.identityconnectors.framework.impl.api.local.operations.ConnectorAPIOperationRunnerProxy.invoke(ConnectorAPIOperationRunnerProxy.java:93)
        at $Proxy363.create(Unknown Source)
any one can support me how to fix this

Try increasing the commandTimeout from 100seconds to 200seconds and see if this works?
Also, look at the Section 5.2.5 in the connector doc.

Problem in creating user request through ContentDB API

Hi
I am trying to create user request on the document. Workflow is configured on the document parent folder. I am trying to submit the document for workflow.
Here is the code i used to create user request
RequestManager reqM = session.getRequestManager();
long[] itemId = { item.getId() };
NamedValueSet[] docParameters = new NamedValueSet[]
new NamedValueSet(
new NamedValue[]
new NamedValue(Attributes.WORKFLOW_PARAMETER_NAME,"JUSTIFICATION"),
new NamedValue(Attributes.WORKFLOW_PARAMETER_DEFAULT_VALUE,
"Edited para 2"),
new NamedValueSet(
new NamedValue[]
new NamedValue(Attributes.WORKFLOW_PARAMETER_NAME,"IFS_ECM_VERBOSE_LOGGING"),
new NamedValue(Attributes.WORKFLOW_PARAMETER_DEFAULT_VALUE,
Boolean.FALSE),
NamedValue[] options2 = new NamedValue[] {
ClientUtils.newNamedValue(Attributes.WORKFLOW_CONFIGURATION_PARAMETERS,docParameters)};
reqM.createUserRequest(itemId, options2);
I got the following error:
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
faultSubcode:
faultString: ORACLE.FDK.UnexpectedError:ORACLE.FDK.ServerError
faultActor:
faultNode:
faultDetail:
     {http://xmlns.oracle.com/content/ws}fault:<detailedErrorCode xsi:type="xsd:string">ORACLE.FDK.ServerError</detailedErrorCode><errorCode xsi:type="xsd:string">ORACLE.FDK.UnexpectedError</errorCode><exceptionEntries xsi:nil="true" xsi:type="ns1:ArrayOfFdkExceptionEntry"/><info xsi:nil="true" xsi:type="ns1:ArrayOfNamedValue"/><serverStackTraceId xsi:type="xsd:string">112-1191017621836</serverStackTraceId>
     {http://xml.apache.org/axis/}hostname:contentdb.sjrwmd.com
ORACLE.FDK.UnexpectedError:ORACLE.FDK.ServerError
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
     at java.lang.Class.newInstance0(Class.java:350)
     at java.lang.Class.newInstance(Class.java:303)
However, If i create user request without passing any parameters it is working fine. I get error only when creating request with parameters.
Please help.

Hi
I could able to get the request invoked. Earlier I tried with wrong parameters.
Thanks

API for creating User in Oracle E-Business Suite through BPEL

Hello,
I would like to use a BPEL process to create a new User in Oracle EBS. In the {color:#0000ff}Integration Repository {color}I was able to find an API called FND_USER_PKG/LOAD_ROW that creates/updates Application's User data. Is this the API I should be using? If so, I would like to better understand how to use this API. What are the required input parameter?
I have created a simple BPEL process and added an Oracle Application Service, which uses this FND_USER_PKG/LOAD_ROW API. I set the following parameter before Invoking the Oracle Application Service: X_USER_NAME, X_ENCRYPTED_USER_PASSWORD and X_START_DATE. When I run the BPEL process I get the following error. I suspect that I am not passing all the required input parameters. Does anyone have any sample data I can use to get this API to load correctly? If I am using the wrong API, please let me know.
Thank you kindly!
Christine
- <input>
- <Invoke_OracleEBS_SecurityUser_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/">
<db:X_USER_NAME>
CRILEY
</db:X_USER_NAME>
<db:X_ENCRYPTED_USER_PASSWORD>
CRILEY
</db:X_ENCRYPTED_USER_PASSWORD>
<db:X_START_DATE>
2009-01-01
</db:X_START_DATE>
</InputParameters>
</part>
</Invoke_OracleEBS_SecurityUser_InputVariable>
</input>
- <fault>
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="code">
<code>
20001
</code>
</part>
- <part name="summary">
<summary>
file:/E:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_SecurityUser.wsdl [ OracleEBS_SecurityUser_ptt::OracleEBS_SecurityUser(InputParameters) ] - WSIF JCA Execute of operation 'OracleEBS_SecurityUser' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.FND_USER_PKG.LOAD_ROW API. Cause: java.sql.SQLException: ORA-20001: APP-FND-02600: Unable to create user CRILEY due to the following reason(s):
Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
An unexpected error occurred. Please contact your System Administrator...
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 783
ORA-06512: at "APPS.FND_USER_PKG", line 916
ORA-06512: at "APPS.FND_USER_PKG", line 1035
ORA-06512: at "APPS.FND_USER_PKG", line 645
ORA-06512: at line 1
Edited by: Christine Riley on Jan 22, 2009 11:00 AM
Edited by: Christine Riley on Jan 27, 2009 1:07 PM

Hello,
I would like to use a BPEL process to create a new User in Oracle EBS. In the {color:#0000ff}Integration Repository {color}I was able to find an API called FND_USER_PKG/LOAD_ROW that creates/updates Application's User data. Is this the API I should be using? If so, I would like to better understand how to use this API. What are the required input parameter?
I have created a simple BPEL process and added an Oracle Application Service, which uses this FND_USER_PKG/LOAD_ROW API. I set the following parameter before Invoking the Oracle Application Service: X_USER_NAME, X_ENCRYPTED_USER_PASSWORD and X_START_DATE. When I run the BPEL process I get the following error. I suspect that I am not passing all the required input parameters. Does anyone have any sample data I can use to get this API to load correctly? If I am using the wrong API, please let me know.
Thank you kindly!
Christine
- <input>
- <Invoke_OracleEBS_SecurityUser_InputVariable>
- <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="InputParameters">
- <InputParameters xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/" xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/APPS/FND_USER_PKG/LOAD_ROW/">
<db:X_USER_NAME>
CRILEY
</db:X_USER_NAME>
<db:X_ENCRYPTED_USER_PASSWORD>
CRILEY
</db:X_ENCRYPTED_USER_PASSWORD>
<db:X_START_DATE>
2009-01-01
</db:X_START_DATE>
</InputParameters>
</part>
</Invoke_OracleEBS_SecurityUser_InputVariable>
</input>
- <fault>
- <bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
- <part name="code">
<code>
20001
</code>
</part>
- <part name="summary">
<summary>
file:/E:/product/10.1.3.1/OracleAS_1/bpel/domains/default/tmp/.bpel_OracleEBS_OnBoarding_1.0_d71e16636aa9ff51b9975926da6faeb2.tmp/OracleEBS_SecurityUser.wsdl [ OracleEBS_SecurityUser_ptt::OracleEBS_SecurityUser(InputParameters) ] - WSIF JCA Execute of operation 'OracleEBS_SecurityUser' failed due to: Error while trying to prepare and execute an API.
An error occurred while preparing and executing the APPS.FND_USER_PKG.LOAD_ROW API. Cause: java.sql.SQLException: ORA-20001: APP-FND-02600: Unable to create user CRILEY due to the following reason(s):
Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
ORA-20001: Unabled to call fnd_ldap_wrapper.create_user due to the following reason:
An unexpected error occurred. Please contact your System Administrator...
ORA-06512: at "APPS.APP_EXCEPTION", line 72
ORA-06512: at "APPS.FND_USER_PKG", line 783
ORA-06512: at "APPS.FND_USER_PKG", line 916
ORA-06512: at "APPS.FND_USER_PKG", line 1035
ORA-06512: at "APPS.FND_USER_PKG", line 645
ORA-06512: at line 1
Edited by: Christine Riley on Jan 22, 2009 11:00 AM
Edited by: Christine Riley on Jan 27, 2009 1:07 PM

Access Denied creating user accounts through vba

Hello,
I have a MS-Access application that runs on a Windows 2012 server. My customer logs into the server using RDP. The MS-Access application is started up automatically by means of the environment variable in the user settings. The customer needs to be able
to create new windows users for this application, simply by clicking a button.
The VBA script to create users works, because when I start up the MS-Access application with my own logged on Administrators account, the new users get created. If my customer tries it, he gets 'Access Denied' error. I have added his user account to
the Power Users group, but that did not solve the problem. I also tried to make him member of the DCOM Users Group, the 'Access Denied' error remains...
I do not want to give him administrator priviliges, because he is 'just a customer'...
What do I need to do for this setup to work? I tried altering some DCom settings, but frankly I do not have enough knowledge to feel comfortable with this. Hope anybody can help me out here...
best regards, Rob

Is this a standalone server? Only administrators can create user accounts, so there is no work around for that. You could look at something that has the administrator account/password stored and launch PSEXEC or something else in an elevated session behind
the scenes but that is a security volunerability because the credentials are stored.
If the account is being created in an Active Directory environment you could delegate permissions to the appropriate OU for your customer.
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Creating user through ifsmanager

Similar Messages

Maybe you are looking for