Creating VPN with OS X Serve 10.4.4 from iMac Intel
Hi all,
Has anyone else had problems creating a VPN (PPTP) connection with a MacOS X Server (10.4.4)?
Everytime I get the following error in my connection log (in Internet Connect)
Received bad configure-nak/rej
And after 1 minute the connection closes...
Xander
I have the same problem when connecting from home on my iMac Core Duo to a PPTP server running on Mac OS X Server 10.3.8 at my office. My iMac connects fine for at least 60 seconds but then within the next 5 seconds I get disconnected. The VPN server has been working fine for months and I can still connect with my iBook running 10.3.9 and my old Power Mac G4 running 10.3.9 worked fine too up until I replaced it with the iMac. All of these machines are using the built-in VPN client configured using Internet Connect.
What types of VPN connections (PPTP, IPSec, etc.) and servers (OS X Server, Cisco, SonicWALL, etc.) are you all trying to connect to and what VPN client are you using?
-- Dave
Similar Messages
-
VPN with OS X Server 10.2.8
Is it possible to create VPN with OSX 10.2.8 ? I can´t find any issue at Mac Help or somewhere else.
OS X Server G4 Mac OS X (10.2.x)Issue resolved.
-
How to create CATALOG with MS SQL Server?
Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification. -
Need help setting up VPN with OS X Server 2.2
I just bought OS X Server in the hopes that it would be a simpler way to set up VPN for use with my iPhone. I've tried a couple third party VPN configuration tools before with older versions of OSX but was never able to get it working. Now I'm running 10.8.2 and Server 2.2. I've made some progress, but I'm not quite there yet.
Here's what I have set up in the VPN window:
And the user I created:
The User services show that VPN is selected:
I let the Server app configure my Airport Extreme, and it looks like it set up the port mapping:
Here are my iPhone settings
-Server is set to my iMac's public IP address assigned by my ISP
-Password is the password I gave the user account
When I turn the VPN on in the iPhone I get:
"Connecting..."
"Starting..."
"Authenticating..."
then an error:
"VPN Connection
Authentification failed."
What am I missing?
Thanks,
SeanHi,
1701
UDP
L2TP
l2f
Mac OS X Server VPN service
1723
TCP
PPTP
pptp
Mac OS X Server VPN service
Try L2TP -
L2TP based VPN with OpenS/WAN server, OpenSSL machine certificates
I cannot seem to get OSX to accept the machine certificates for a VPN connection using Internet Connect.
I have generated OpenSSL x509 certificates for the server and client side, the same process has generated certificates that work just dandy with WindowsXP. The certificates have "subjectAltName=" key/value pairs assigned to the IP address of the VPN server.
Once generated I import the certificates into OS X (you have to run KeyChain Access with "sudo" from the console to get this to work). The certificate authority seems to be ok, the CA has been added to the x509Roots, and when I examine the machine certificate for my OS X install using KeyChain Access the certificate is marked valid.
I generated the hash link for the certificate:
ln -s /etc/racoon/certs/certname.pem /etc/racoon/certs/'openssl x509 -noout -in certname.pem'.0
From the console I run '
openssl verify certname.pem
It fails unless I specify '-CAPath /etc/racoon/certs', then it passes.
When Internet Connect is setup to use the certificates I can see in the OpenS/WAN logs that the OS X box connects and negotiates IPSEC to MAIN_3. At this point pluto logs the following:
ignoring informational payload, type INVALIDCERTAUTHORITY
This repeats for several re-tries before the OS X side gives up. No useful logging is generated on the OS X side for me to debug, and everything from the OpenS/WAN side seems to be kosher, it appears to be an oakley/racoon issue with validating the machine certificate provided by OpenS/WAN to the OS X side, with the OS X side unable to verify the certificate.
Has anyone solved this? Any ideas on how to improve the logging output from OS X so I can see what racoon/oakley is carping about in the certificate files it is using?I'm having the same problem. I've got a machine cert on my Mac OS 10.4.6 client that was issued by my Win2003 CA. When I try and connect, it just hangs and then dies. In the Security Logs on the 2003 L2TP server, I even see a successful IKE negotiation (MS Event ID 541 and 543 below).
EventID 541:
IKE security association established.
Mode:
Key Exchange Mode (Main Mode)
Peer Identity:
Certificate based Identity.
Peer Subject C=US, S=City, L=State, O=Company, OU=group, CN=machine.subdomain.company.com, E=[email protected]
Peer SHA Thumbprint peerthumbrint
Peer Issuing Certificate Authority O=company.com, CN=Certificate Authority
Root Certificate Authority O=company.com, CN=Certificate Authority
My Subject CN=server.subdomain.company.com
My SHA Thumbprint mythumbrint
Peer IP Address: x.x.x.x
Filter:
Source IP Address x.x.x.x
Source IP Address Mask 255.255.255.255
Destination IP Address x.x.x.x
Destination IP Address Mask 255.255.255.255
Protocol 0
Source Port 0
Destination Port 0
IKE Local Addr x.x.x.x
IKE Peer Addr x.x.x.x
IKE Source Port 500
IKE Destination Port 500
Peer Private Addr
Parameters:
ESP Algorithm Triple DES CBC
HMAC Algorithm SHA
Lifetime (sec) 3600
MM delta time (sec) 1
EventID 543:
IKE security association ended.
Mode: Key Exchange (Main mode)
Filter:
Source IP Address X.X.X.X
Source IP Address Mask 255.255.255.255
Destination IP Address X.X.X.X
Destination IP Address Mask 255.255.255.255
Protocol 0
Source Port 0
Destination Port 0
IKE Local Addr X.X.X.X
IKE Peer Addr X.X.X.X
IKE Source Port 500
IKE Destination Port 500
Peer Private Addr
At least give me a some methods to debug with. -
Help! VPN with Leopard & Leopard server isn't working!
Hello all,
I have tried (and tried, and tried) to get VPN to work on Leopard server v10.5.1 and I cannot get this to work no matter what I have tried. here is my setup:
Router:
New Airport Extreme Base station running firmware v7.1.1. I have my server open to the world (for this test)
Server:
Mac Mini running v10.5.1 server. Both VPN L2TP and PPTP is setup and configured. NAT is NOT turned on, the AEBS is doing DHCP for me (should the server be doing that?).
When I try to connect via PPTP here is my log:
2007-11-23 10:41:22 EST Incoming call... Address given to client = 192.168.4.121
Fri Nov 23 10:41:22 2007 : Directory Services Authentication plugin initialized
Fri Nov 23 10:41:22 2007 : Directory Services Authorization plugin initialized
Fri Nov 23 10:41:22 2007 : PPTP incoming call in progress from '208.xxx.xxx.xxx'...
Fri Nov 23 10:41:23 2007 : PPTP connection established.
Fri Nov 23 10:41:23 2007 : using link 0
Fri Nov 23 10:41:23 2007 : Using interface ppp0
Fri Nov 23 10:41:23 2007 : Connect: ppp0 <--> socket[34:17]
Fri Nov 23 10:41:23 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:26 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:29 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:32 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:35 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:38 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:41 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:44 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:47 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:50 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x407014ff> <pcomp> <accomp>]
Fri Nov 23 10:41:53 2007 : LCP: timeout sending Config-Requests
Fri Nov 23 10:41:53 2007 : Connection terminated.
Fri Nov 23 10:41:53 2007 : PPTP disconnecting...
Fri Nov 23 10:41:53 2007 : PPTP disconnected
2007-11-23 10:41:53 EST --> Client with address = 192.168.4.121 has hungup
I can see that my system is receiving the request for VPN, but my workstation isn't responding it seems. I have had this working under 10.4, but cannot get server 10.5 to work at all.
Any ideas?Hi All,
Exactly the same problem here, but with one VPN it works most of the time:
Sun Nov 25 14:50:27 2007 : PPTP connecting to server '10.0.4.35
10.0.4.35' (10.0.4.35)...
Sun Nov 25 14:50:28 2007 : PPTP connection established.
Sun Nov 25 14:50:28 2007 : using link 0
Sun Nov 25 14:50:28 2007 : Using interface ppp0
Sun Nov 25 14:50:28 2007 : Connect: ppp0 <--> socket[34:17]
Sun Nov 25 14:50:28 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x52583874> <pcomp> <accomp>]
Sun Nov 25 14:50:31 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x52583874> <pcomp> <accomp>]
Sun Nov 25 14:50:34 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x52583874> <pcomp> <accomp>]
Sun Nov 25 14:50:37 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x52583874> <pcomp> <accomp>]
Sun Nov 25 14:50:40 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x52583874> <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x52583874> <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfReq id=0x1 <asyncmap 0xffffffff> <mru 1460> <magic 0xe14a182f> <quality lqr 00 00 17 70> <auth chap MS-v2>]
Sun Nov 25 14:50:43 2007 : lcp_reqci: returning CONFREJ.
Sun Nov 25 14:50:43 2007 : sent [LCP ConfRej id=0x1 <quality lqr 00 00 17 70>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x52583874>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfRej id=0x1 <pcomp> <accomp>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfReq id=0x2 <asyncmap 0xffffffff> <mru 1460> <magic 0xe14a182f> <auth chap MS-v2>]
Sun Nov 25 14:50:43 2007 : lcp_reqci: returning CONFACK.
Sun Nov 25 14:50:43 2007 : sent [LCP ConfAck id=0x2 <asyncmap 0xffffffff> <mru 1460> <magic 0xe14a182f> <auth chap MS-v2>]
Sun Nov 25 14:50:43 2007 : rcvd [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x52583874>]
Sun Nov 25 14:50:43 2007 : sent [LCP EchoReq id=0x0 magic=0x52583874]
Sun Nov 25 14:50:43 2007 : rcvd [LCP EchoReq id=0x0 magic=0xe14a182f 00 00 00 00 e1 4a 18 2f]
Sun Nov 25 14:50:43 2007 : sent [LCP EchoRep id=0x0 magic=0x52583874 00 00 00 00 e1 4a 18 2f]
Sun Nov 25 14:50:43 2007 : rcvd [CHAP Challenge id=0x1 <33373237373537323934343739393131>, name = ""]
While with other VPN it does not work most of the time:
Sun Nov 25 14:49:52 2007 : PPTP connecting to server '*******************' (*************)...
Sun Nov 25 14:49:52 2007 : PPTP connection established.
Sun Nov 25 14:49:52 2007 : using link 0
Sun Nov 25 14:49:52 2007 : Using interface ppp0
Sun Nov 25 14:49:52 2007 : Connect: ppp0 <--> socket[34:17]
Sun Nov 25 14:49:53 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:49:56 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:49:59 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:02 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:05 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:08 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:11 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:14 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:17 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:20 2007 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8533a7cf> <pcomp> <accomp>]
Sun Nov 25 14:50:23 2007 : LCP: timeout sending Config-Requests
Sun Nov 25 14:50:23 2007 : Connection terminated.
Sun Nov 25 14:50:23 2007 : PPTP disconnecting...
Sun Nov 25 14:50:23 2007 : PPTP disconnected -
Setting up VPN with OS X Server/Netgear FVS318 and remote offices
I am a newbie to VPN and am hoping someone can help get the config right. We have an Xserve (Server 10.4) and a range of G5's (OS 10.4) in 3 remote offices and want to setup a VPN between the remote offices back to the xServe. All 3 remote office are behind their own WGT624 router. Our setup looking like this:
Remote Office G5 (OS 10.4)
|
|
Netgear WGT624 (with dynamic IP address supplied by ISP)
|
|
Cable Modem
|
|
**INTERNET**
|
|
Cable Modem
|
|
Netgear FVS318 (v1) with static IP of 61.xxx.xxx.xxx
|
|
xServe (OS X 10.4 Server)
Can someone please walk me through the setup we need at head office and how we setup the branch office.
ThanksHi,
1701
UDP
L2TP
l2f
Mac OS X Server VPN service
1723
TCP
PPTP
pptp
Mac OS X Server VPN service
Try L2TP -
Creating website with 3rd party server using blogspot or wordpress's domain name?
Hi all!
I just wonder...
I am now offered a free hosting service and I want to create my personal site with iWeb.
Questions come:
I don't really wish to buy a domain since the free service only last for half a year and I just want to try out blogging...
Is it possible for me to use create a iWeb made site using blogspot or wordpress domain and 3rd party hosting service?
Thanks in advance. Coz i really have no experience on thisThe short answer is no. WordPress and Blogspot are two totally different things and are blogging systems and you can use these for free, but what you do is create a username and your blog is then pubished to WordPress servers etc., so your blog url is then http://username.wordpress.com.
If you want to create a site with iWeb and avail yourself of free hosting and upload there, then you'll need to register a domain name.
Wordpress, iWeb and Blogspot are totally different and the only way in which you can use both is to create your site in iWeb and then upload to the free hosting and just create a link from your iWeb site to your blog created with either WordPress or Blogspot. -
Issues with VPN on 10.3 Server
I have no problems using the VPN with 10.4 Server. I manage several of these, and the VPN works fine.
However, with 10.3 Server it doesn't seem to work. I have two 10.3.9 servers at different offices, and with each I can connect to the VPN, I get an IP address, but I cannot access any resources through the VPN. Does anyone have any ideas about this?Thanks for your reply.
I'm using PPTP. I've got it set up the same way as with 10.4 server.
The servers are behind NAT routers, with TCP port 1723 forwarded to them.
In each case the private IP subnet on the server is different from the one I'm connecting from.
I'm connecting just fine to the VPN, but once I'm connected I can't connect to anything on the network.
One thing I see in the system log when I try to make a connection is this: "Protocol-Reject for unsupported protocol."
What do you think? -
AAA Radius Authentication for Remote VPN With ACS Server Across L2L VPN
Hi,
I have an ASA running fine on the network which provide L2L tunnel to remote site and provide Remote VPN for remote access users.
Currently, there is a need for the users to authenticate against an ACS server that located across the L2L VPN tunnel.
The topology is just simple with 2 interfaces on the ASA, inside and outside, and a default route pointing to the ISP IP Address.
I can ping the IP address of the ACS Server (which located at the remote site, IP addr: 10.10.10.56) from the ASA:
ping inside 10.10.10.56
However when I configure the ASA for the AAA group with commands:
aaa-server ACSAuth protocol radius
aaa-server ACSAuth host (inside) 10.10.10.56 key AcsSecret123
Then when I do the show run, here is the result:
aaa-server ACSAuth protocol radius
aaa-server host 10.10.10.56
key AcsSecret123
From what I thought is, with this running config, traffic is not directed to the L2L VPN tunnel
(seems to be directed to the default gateway due to the default route information) which cause failure to do the AAA authentication.
Does anybody ever implement such this thing and whether is it possible? And if yes, how should be the config?
Your help will be really appreciated!
Thanks.
Best Regards,
JoAAA is designed to enable you to dynamically configure the type of authentication and authorization you want on a per-line (per-user) or per-service (for example, IP, IPX, or VPDN) basis. You define the type of authentication and authorization you want by creating method lists, then applying those method lists to specific services or interfaces.
http://www.cisco.com/en/US/docs/ios/12_4/secure/configuration/guide/schaaa.html -
Home directories not fully created - AD with OSX server
Hope this makes sense.
I'm setting up a network in a school. We've an Xserve running Mac OS X Server 10.6.4. So that students can move seamlessly between our windows network and this, we've extended the AD schema and have the Server bound to AD. Clients are running 10.6.4, bound in a triangle with the Mac Open Directory and AD. So far, so good, all works fine.
I've been able to set preferences and network home paths with no major issues and scripted to get around problems with using iMovie. However as we've been awaiting some replacement hard drives to set up a new RAID, the home paths have been set to the share automatically created for Users - so afp://SERVER/Users
Now our new hard drives have turned up. The RAID is setup and working. I've created a new folder to store home paths - just to test with one user initially. I shared this path 'StaffData', enabled it for automount via afp, in protocol I've enabled guest access for afp. I copied the permissions set for the original /Users directory we were using. In WGM I've changed the home path for this user to afp://SERVER/StaffData, saved, then rebooted the client.
When I then login with this user it created the top level home directory - afp://SERVER/StaffData/USERNAME - and then a subfolder for /Library and /Desktop. No other folders are created (Music, Movies, Photos, Documents are all missing). I'm able to get it to generate Music when I load iTunes, but the same doesn't happen for iMovie or iPhoto.
I'm guessing its a permissions issue? When I switch the home folder back to the server's /User directory it creates all the home folders without any issues. Can anyone point me in the direction of a solution to this?Yep, I always get an error "The home directory could not be created because an error occurred". Always had that, even on the original /Users share that worked.
Kind of found a way around, have written a script to run at login that checks to see if Pictures, Movies, etc folders are present, and if it doesn't it just makes a new directory with that name. It's a bit of a bodge, but seems to still work. Would still love to have another proper fix eventually, but for the time being it's solved the immediate problem I had!
Thanks for your advice. -
Remote access VPN with ASA 5510 using DHCP server
Hi,
Can someone please share your knowledge to help me find why I am not able to receive an IP address on remote access VPN connection while I can get an IP address on local DHCP pool?
I am trying to setup remote access VPN with ASA 5510. It works with local dhcp pool but doesn't seem to work when I tried using an existing DHCP server. It is being tested in an internal network as follows:
ASA Version 8.2(5)
interface Ethernet0/1
nameif inside
security-level 100
ip address 10.6.0.12 255.255.254.0
ip local pool testpool 10.6.240.150-10.6.240.159 mask 255.255.248.0 !(worked with this)
route inside 0.0.0.0 0.0.0.0 10.6.0.1 1
crypto ipsec transform-set FirstSet esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map dyn1 1 set transform-set FirstSet
crypto map mymap 1 ipsec-isakmp dynamic dyn1
crypto map mymap interface inside
crypto isakmp enable inside
crypto isakmp policy 1
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 43200
vpn-addr-assign aaa
vpn-addr-assign dhcp
group-policy testgroup internal
group-policy testgroup attributes
dhcp-network-scope 10.6.192.1
ipsec-udp enable
ipsec-udp-port 10000
username testlay password *********** encrypted
tunnel-group testgroup type remote-access
tunnel-group testgroup general-attributes
default-group-policy testgroup
dhcp-server 10.6.20.3
tunnel-group testgroup ipsec-attributes
pre-shared-key *****
I got following output when I test connect to ASA with Cisco VPN client 5.0
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + VENDO
4024 bytesR copied in 3.41 0 secs (1341 by(tes/sec)13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 853
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ISA_KE payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received xauth V6 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received DPD VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Fragmentation VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, IKE Peer included IKE fragmentation capability flags: Main Mode: True Aggressive Mode: False
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received NAT-Traversal ver 02 VID
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, Connection landed on tunnel_group testgroup
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing IKE SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, IKE SA Proposal # 1, Transform # 9 acceptable Matches global IKE entry # 1
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ISAKMP SA payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ke payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing nonce payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Generating keys for Responder...
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing ID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Cisco Unity VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing xauth V6 VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing dpd vid payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Traversal VID ver 02 payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing Fragmentation VID + extended capabilities payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Send Altiga/Cisco VPN3000/Cisco ASA GW VID
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=0) with payloads : HDR + SA (1) + KE (4) + NONCE (10) + ID (5) + HASH (8) + VENDOR (13) + VENDOR (13) + VENDOR (13) + VENDOR (13) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 440
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=0) with payloads : HDR + HASH (8) + NOTIFY (11) + NAT-D (130) + NAT-D (130) + VENDOR (13) + VENDOR (13) + NONE (0) total length : 168
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Computing hash for ISAKMP
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing NAT-Discovery payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, computing NAT Discovery hash
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing IOS/PIX Vendor ID payload (version: 1.0.0, capabilities: 00000408)
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, processing VID payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Received Cisco Unity client VID
Jan 16 15:39:21 [IKEv1]: Group = testgroup, I
[OK]
kens-mgmt-012# P = 10.15.200.108, Automatic NAT Detection Status: Remote end is NOT behind a NAT device This end is NOT behind a NAT device
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:21 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:21 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 72
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=d4ca48e4) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 87
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, IP = 10.15.200.108, Processing MODE_CFG Reply attributes.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary DNS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: primary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: secondary WINS = cleared
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: IP Compression = disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Split Tunneling Policy = Disabled
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Setting = no-modify
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKEGetUserAttributes: Browser Proxy Bypass Local = disable
Jan 16 15:39:26 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, User (testlay) authenticated.
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 64
Jan 16 15:39:26 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=6b1b471) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 60
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:26 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg ACK attributes
Jan 16 15:39:27 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=49ae1bb8) with payloads : HDR + HASH (8) + ATTR (14) + NONE (0) total length : 182
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, process_attr(): Enter!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Processing cfg Request attributes
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for IPV4 net mask!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DNS server address!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for WINS server address!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Received unsupported transaction mode attribute: 5
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Banner!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Save PW setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Default Domain Name!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split Tunnel List!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Split DNS!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for PFS setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Browser Proxy Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for backup ip-sec peer list!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Client Smartcard Removal Disconnect Setting!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for Application Version!
Jan 16 15:39:27 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Client Type: WinNT Client Application Version: 5.0.07.0440
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for FWTYPE!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for DHCP hostname for DDNS is: DEC20128!
Jan 16 15:39:27 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, MODE_CFG: Received request for UDP Port!
Jan 16 15:39:32 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:37 [IKEv1]: IP = 10.15.200.108, IKE_DECODE RECEIVED Message (msgid=b04e830f) with payloads : HDR + HASH (8) + NOTIFY (11) + NONE (0) total length : 84
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing hash payload
Jan 16 15:39:37 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, processing notify payload
Jan 16 15:39:37 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Duplicate Phase 2 packet detected. No last packet to retransmit.
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE received response of type [] to a request from the IP address utility
Jan 16 15:39:39 [IKEv1]: Group = testgroup, Username = testlay, IP = 10.15.200.108, Cannot obtain an IP address for remote peer
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE TM V6 FSM error history (struct &0xd8030048) <state>, <event>: TM_DONE, EV_ERROR-->TM_BLD_REPLY, EV_IP_FAIL-->TM_BLD_REPLY, NullEvent-->TM_BLD_REPLY, EV_GET_IP-->TM_BLD_REPLY, EV_NEED_IP-->TM_WAIT_REQ, EV_PROC_MSG-->TM_WAIT_REQ, EV_HASH_OK-->TM_WAIT_REQ, NullEvent
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE AM Responder FSM error history (struct &0xd82b6740) <state>, <event>: AM_DONE, EV_ERROR-->AM_TM_INIT_MODECFG_V6H, EV_TM_FAIL-->AM_TM_INIT_MODECFG_V6H, NullEvent-->AM_TM_INIT_MODECFG, EV_WAIT-->AM_TM_INIT_XAUTH_V6H, EV_CHECK_QM_MSG-->AM_TM_INIT_XAUTH_V6H, EV_TM_XAUTH_OK-->AM_TM_INIT_XAUTH_V6H, NullEvent-->AM_TM_INIT_XAUTH_V6H, EV_ACTIVATE_NEW_SA
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, IKE SA AM:bd3a9a4b terminating: flags 0x0945c001, refcnt 0, tuncnt 0
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, sending delete/delete with reason message
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing blank hash payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing IKE delete payload
Jan 16 15:39:39 [IKEv1 DEBUG]: Group = testgroup, Username = testlay, IP = 10.15.200.108, constructing qm hash payload
Jan 16 15:39:39 [IKEv1]: IP = 10.15.200.108, IKE_DECODE SENDING Message (msgid=9de30522) with payloads : HDR + HASH (8) + DELETE (12) + NONE (0) total length : 80
Regards,
LayFor RADIUS you need a aaa-server-definition:
aaa-server NPS-RADIUS protocol radius
aaa-server NPS-RADIUS (inside) host 10.10.18.12
key *****
authentication-port 1812
accounting-port 1813
and tell your tunnel-group to ask that server:
tunnel-group VPN general-attributes
authentication-server-group NPS-RADIUS LOCAL
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
Unable to access gateway and DNS via VPN (L2TP) with Snow Leopard Server
Summary:
After rebooting my VPN server, i am able to establish a VPN (L2TP) connection from outside my private network. I am able to connect (ping, SSH, …) the gateway only until the first client disconnects. Then i can perfectly access all the other computers of the private network, but i cannot access the private IP address of the gateway.
Additionally, during my first VPN connection, my DNS server, which is on the same server, is not working properly with VPN. I can access it with the public IP address of my gateway. I can access it from inside my private network. A port scan indicates me that the port 53 is open, but a dig returns me a timeout.
Configuration:
Cluster of 19 Xserve3.1 - Snow Leopard Server 10.6.2
Private network 192.168.1.0/255.255.255.0 -> domain name: cluster
-> 1 controller, which act as a gateway for the cluster private network, with the following services activated:
DHCP, DNS, firewall (allowing all incoming traffic for each groups for test purposes), NAT, VPN, OpenDirectory, web, software update, AFP, NFS and Xgrid controller.
en0: fixed public IP address -> controller.example.com
en1: 192.168.1.254 -> controller.cluster
-> 18 agents with AFP and Xgrid agent activated:
en1: 192.168.1.x -> nodex.cluster with x between 1 and 18
VPN (L2TP) server distributes IP addresses between 192.168.1.201 and 192.168.1.210 (-> vpn1.cluster to vpn10.cluster). Client informations contain the private network DNS server informations (192.168.1.254, search domain: cluster).
_*Detailed problem description:*_
After rebooting the Xserve, my VPN server works fine except for the DNS. My client receives the correct informations:
Configure IPv4: Using PPP
IPv4 address: 192.168.1.201
Subnet Mask:
Router: 192.168.1.254
DNS: 192.168.1.254
Search domain: cluster
From my VPN client, i can ping all the Xserve of my cluster (192.168.1.1 to 18 and 192.168.1.254). If i have a look in Server Admin > Settings > Network, i have three interfaces listed: en0, en1 and ppp0 of family IPv4 with address 192.168.1.254 and DNS name controller.cluster.
The DNS server returns me timeouts when i try to do a dig from my VPN client even if i am able to access it directly from a computer inside or outside my private network.
After i disconnect, i can see in Server Admin that the IP address of my ppp0 interface has switch to my public IP address.
Then i can always establish a VPN (L2TP) connection, but the client receives the following informations:
Configure IPv4: Using PPP
IPv4 address: 192.168.1.202
Subnet Mask:
Router: (Public IP address of my VPN server)
DNS: 192.168.1.254
Search domain: cluster
From my VPN client, i can access all the other computers of my network (192.168.1.1 to 192.168.1.18) but when i ping my gateway (192.168.1.254), it returns me timeouts.
I have two "lazy" solutions to this problem: 1) Configure VPN and DNS servers on two differents Xserve, 2) Put the public IP address of my gateway as DNS server address, but none of these solutions are acceptable for me…
Any help is welcome!!!I would suggest taking a look at:
server admin:vpn:settings:client information:network route definitions.
as I understand your setup it should be something like
192.168.1.0 255.255.255.0 private.
at least as a start. I just got done troubleshooting a similar issue but via two subnets:
http://discussions.apple.com/thread.jspa?threadID=2292827&tstart=0 -
How can I create a client console and work together with the Cache Server?
How can I edit the following Cache-Server.cmd file to create a client console and work together with the Cache Server?
The following is the cache server file: contacts-cache-server.cmd
@echo off
setlocal
if (%COHERENCE_HOME%)==() (
set COHERENCE_HOME=c:\coherence
set CONFIG=C:\home\oracle\coherence\Contacts
set COH_OPTS=%COH_OPTS% -server -cp %COHERENCE_HOME%\lib\coherence.jar;C:\home\oracle\
coherence\Contacts;C:\home\oracle\coherence\Contacts\classes;
set COH_OPTS=%COH_OPTS% -Dtangosol.coherence.cacheconfig=%CONFIG%\contacts-cache-config.xml
java %COH_OPTS% -Xms1g -Xmx1g -Xloggc: com.tangosol.net.DefaultCacheServer %2 %3 %4 %5 %6 %7
:exitEdited by: junez on 23-Oct-2009 09:20Hi
To run the console, change DefaultCacheServer to CacheFactory
Paul -
How to create a database in SQL Server Express 2014 to be used with LV Database Toolkit
I use LV Database Toolkit, which by default uses Jet database. Now I want to use SQL database with LV Database Toolkit. I have downloaded and installed "SQL Server 2014 Express with Tools" in my Labview Laptop. Now I want to create a database in SQL Server, because I think it is a requirement for creating a "udl connection file" (*.udl file). Please help me!
Solved!
Go to Solution.I made a database whose path is: C:\Program Files\Microsoft SQL Server\MSSQL12.SQLEXPRESS\MSSQL\DATA\depot1
I tried to make .udl connection file, but when I click on "test connection" with the provider: "OLEDB Provider for Microsoft SQL Server" I get the Error "UDL Connection File Failure" (attached below)
When I tried to make the .udl connection file with the provider "Microsoft SQL native Client 11.0" and when I click on "Test Connection" I get the Error" UDL Native Client_1"& " UDL Native Client_2".
Please help!
Thanks!
Attachments:
UDL Connection File Failure.png 78 KB
UDL with Native Client_1.png 702 KB
UDL with Native Client_2.png 714 KB
Maybe you are looking for
-
Insufficient bandwidth, or not responding
I'm trying to connect with my friend to talk, not use video. it's not working - every time it either says 'insufficient bandwidth' or 'they did not repsond' - but she is responding! help?
-
Cannot Publish--Need to Upgrade?
Hi. I'm running a version of iWeb that was loaded on my MB Pro when I got it in 2006. I'm wondering if I need to upgrade to iWeb 09 in order to keep publishing new pages and new sites. I've not been able to publish for more than a year now. Each time
-
4.0.3 update killed my Safari
I did the download on the Safari 4 update 4.0.3 and now Safari won't even open. It will only open about half way then go no further. If I do a force quit it tells me Safari (not responding) so that I have to make it stop or it simply keeps spinning t
-
hi gurus, I have a problem when creating billing out put automatically. through condition technique . I did it when am looking into vf02 it is not coming automatically. when am giving manually it is accepting. when i saved that out put type it i
-
Upgrade from AppV 4.6 RTM to 4.6 SP3 with HF03
Hi, While doing the upgradation of APPV client from AppV 4.6 RTM (v4.6.0.1523 ) to 4.6 SP3 with HF03, do we need to do any kind of consideration. I am concern about will all the packages created with 4.6, work properly in 4.6 SP3 with HF03? Packages