Creation of Semi-Dynamic TBOMs using UPL data

I am trying to perform BPCA in a managed system using Solman 7.1 SP10. I have already enabled UPL for the managed system and now want to create TBOMs using the UPL data. There aren't any good knowledge bases talking about this procedure. Any help in this regard would be appreciated. Thanks.
Regards,
Abijit

HI Abhijit,
Check information on "How to activate UPL" please check the document in the service marketplace:
http://service.sap.com/~sapidb/011000358700000427102012E
To see if the UPL extractor are correctly set, you could perform the following steps:
1. Configure the managed in which UPL data is to be collected. The 'Extractors Setup' step is especially important.
2. Activate the BW content. Activate all queries and cubes under 'SAP Solution Manager - Custom Code Life Cycle Management'
3. Activate the UPL extractors for the managed system, in the area 'Infrastructure -> Extractor Framework' of the 'Solution Manager Administration' work center
4. The activation of UPL is described in more detail in SAP Note 1683134.
Also check:
1828848 - Usage and Procedure Logging: Technical prerequisite
1920451 - Missing BI Workload data and wrong UPL result
Thanks
Vikram

Similar Messages

Create dynamic table using pojo data control

What are the options we can in order to create dynamic table columns based on pojo data control?
We have a class A and there are some attributes say A.x, A.y, A.z
Within class A, we have a collection of class B and has attribute say B.k
Within class A, we have a collection of class C and has attribute say C.j
Every instance of class A has same number of instances of class B
Every instance of class A has same number of instances of class C
We would like to display a table like this
A.x, A.y, A.z, [B.k, B.k, ...], [C.j, C.j, ...]
How should we do that?
Thanks

What are the options we can in order to create dynamic table columns based on pojo data control?
We have a class A and there are some attributes say A.x, A.y, A.z
Within class A, we have a collection of class B and has attribute say B.k
Within class A, we have a collection of class C and has attribute say C.j
Every instance of class A has same number of instances of class B
Every instance of class A has same number of instances of class C
We would like to display a table like this
A.x, A.y, A.z, [B.k, B.k, ...], [C.j, C.j, ...]
How should we do that?
Thanks

How to Create Dynamic form using table data

Dear All,
I have one Table called PRODUCT_MASTER where product details are stored. Say product A,B,C,D are stored in the table. Another table called SUB_PRODUCT_MASTER, which contains sub product details.Say A1,A1,B1,B2, B3,C1, C2, C3, D1,D2,D3.
Now, I want to create a dynamic form based on product,sub product. for a whole month. For better under standing here is the format.
PRODUCT A B C D
SUB_PROD A1 A2 B1 B2 B3 C1 C2 C3 D1 D2 D3
Days
1 x x x x x x x x
2
3
4
5
6
7
Now whenever I add one row in the PRODUCT)MASTER table and SUB_PRODUCT_MASTER table, Form should add one column in the form automatically. e.g. If I add Product E with two Sub product E1 and E2 then form should add ptoduct E column in the form with sub products E1 and E2 as per above format. Here days are fixed to 31. This forms should accept product wise daily despatch entry. For
storing despatch entry another table is created.
Please help to create this type od forms.

You want I believe to create Croos-Table(Matrix) form. Visit Cross-table (matrix) forms layout and add "Please Send me too".

Creation of internal table dynamically based on the Date Range entered

Hi SAPgurus,
I have been facing one issue i.e creation of internal table dynamically based on the date range entered in the selection screen. For example the date range I am giving as 06/2006 to 08/2006, it should display the Fieldcatelog dynamically, this part i have completed but the only issue I am facing is to populate the sales data into that fields.
Right now my program is displaying the ALV like this.
Ex:
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00
Shiva new york 30.00
Shiva new york 40.00
but it should display like this
CSR District 06/2006 07/2006 08/2006 totals
Shiva New York 10.00 30.00 40.00
80.00
Please help me in this scenario, how to acheive like this..
Thanks & Regards,
Sivaram Kandula

Hi Sivaram,
 I also got the same requirement . i saw rich and your code whatever you have uploaded.i have created dynamic internal table but i am facing the issue to populating the data to my dynamic internal table.
Sivaram, can you please explain your code after this.
*<dyn_table>
*tab_item.
LOOP AT tab_item.
 ASSIGN COMPONENT 1 OF STRUCTURE <dyn_wa> TO <dyn_table>.
 ASSIGN COMPONENT 2 OF STRUCTURE <dyn_wa> TO <dyn_table>.
* <dyn_wa> = tab_item-bztxt.
* <dyn_wa> = tab_item-total.
* APPEND <dyn_wa> TO <dyn_table>.
** <dyn_wa> = tab_item-total.
** ASSIGN tab_item-bezei TO <dyn_wa>.
* APPEND <dyn_table>.
ENDLOOP.
how you are puting the loop at tab_item. but tab_item is already commented.
can you send me the code after that.
i am sending some part of my code.
CALL METHOD cl_alv_table_create=>create_dynamic_table
 EXPORTING
 it_fieldcatalog = gt_fCAT1
 IMPORTING
 ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
 create data new_line like line of <dyn_table>.
 assign new_line->* to <dyn_wa>.
select vbeln
 fkart
 vkorg
 vtweg
 fkdat
 spart
 fksto
 from vbrk
 client specified
 into table gt_vbrk
 where mandt = sy-mandt
 and fkart in ('ZF5','ZFR')
 and vkorg = '1100'
 and vtweg = '20'
 and fkdat in s_fkdat
 and spart = '06'
 and fksto = ' '.
 if gt_vbrk[] is not initial.
select vbeln
 fkimg
 prsdt
 netwr
 matnr
 arktx
 werks
 mwsbp
 from vbrp
 client specified
 into table gt_vbrp
 for all entries in gt_vbrk
 where vbeln = gt_vbrk-vbeln
 and werks in s_werks
 and matnr in s_matnr.
endif.
select mnr ltx spras from t247
into table it_t247
where spras = 'E'.
data: lv_month1 type vbrp-prsdt,
 name1(3) type c,
 s_month type string,
 s_month1 type string,
 s_month2 type string.
* lv_netwr1 type vbrp-netwr,
* lv_mwsbp1 type vbrp-mwsbp.
 loop at gt_vbrp into gs_vbrp.
 gs_final2-matnr = gs_vbrp-matnr.
 gs_final2-arktx = gs_vbrp-arktx.
 gs_final2-fkimg = gs_vbrp-fkimg.
 lv_month1 = gs_vbrp-prsdt.
 read table it_t247 into wa_t247 with key mnr = lv_month1+4(2).
 if sy-subrc eq 0.
 name1 = wa_t247-ltx.
 endif.
 concatenate name1
 lv_month1(4) into s_month SEPARATED BY '_' .
 CONCATENATE S_MONTH 'QTY' INTO S_MONTH1 SEPARATED BY ''.
 CONCATENATE S_MONTH 'VALUE' INTO S_MONTH2 SEPARATED BY ''.
 gs_final2-month = s_month.
 lv_netwr1 = gs_vbrp-netwr.
 lv_mwsbp1 = gs_vbrp-mwsbp.
 gs_final2-MONTH_QTY = S_MONTH1.
 GS_FINAL2-MONTH_VAL = S_MONTH2.
 gs_final2-value = lv_netwr1 + lv_mwsbp1.
 append gs_final2 to gt_final2.
 clear: gs_final2. "lv_name2.
 endloop.
 if gt_final2[] is not initial.
 sort gt_final2 by matnr month ascending .
 loop at gt_final2 into gs_final2.
 gs_final2_01 = gs_final2.
 collect gs_final2_01 into gt_final2_01.
 endloop.
 endif.
 ENDIF..
Regards
Ankur

Question regarding the creation of a custom dynamic stamp using "Will Print" from "Set Doc. Actions

Hi all,
Using Acrobat 9.0 Professional, I have successfully created a dynamic stamp using the forums where I have added Login / Date to my own image and it works great as designed. However, the problem I am having is that when a document is stamped it becomes flat and doesn't update dynamically which does not work for my requirements.
I need to create a pdf that is stamped by myself so that other users (using only Reader) can open the pdf and when printed the stamp will print with the correct date/time (in the format I describe below).
I found a workaround (outside of a stamp) where I added a text box (called "Today") that updates everytime the document is printed by going to
Advanced / Document Processing / Set Document Actions / Document Will Print
and adding the following Java Code:
var f = this.getField("Today");
f.value = util.printd('yyyymmddhMMss', new Date());
This provides me with the unique number that I need for printing (ie: 20100317102030). It works great as an inserted text field on my pdf.
My problem is that when I use the "create custom stamp" as in other tutorials by inserting this new text field, it will not update (or display) on print, even though it was set the exact same way as the custom stamp I got working using the Adobe dynamic stamp information.
Can you offer any advice on how I can get this to work as a custom stamp? I would rather not have to create both a stamp and then overlay the text field manually as I have hundreds of documents (maybe more) to do this for.
Also, as an aside, if I could get this to work, I would also like to add Login ID that updates in the same manner as my custom date format (but one problem at a time I guess! )
Thanks for any and all help that you can provide. I looked through these forums and elsewhere, but I don't seem to see anyone else with the same problems (with solutions posted).
I really wish Adobe had a Custom Stamp creator as part of their program, with the dynamic option. It would be so easy for them and save a lot of users so much time.

Stamps are just like a inked rubber stamp, except in Acrobat you can suppress printing them and you can move them. So if you use a dated "Faxed" stamp when you fax a document, even though you can adjust the stamp before affixing the stamp, once the document is stamped the date on the document can not be changed or moved. It appears, that the use of a stamp might not be the best solution.
"Interactive" means Acrobat JavaScript programing.
With JavaScript not only can you insert variable data but also fixed text strings or a combination of both.
So your script could be updated to something like:
var f = this.getField("Today");
f.value = "Printed : " + util.printd('yyyymmddhMMss', new Date());
http://forums.adobe.com/message/1333261#1333261
Getting the 'login name" will require some special JavaScript code being added to an application level JavaScript folder that runs upon initialization and is the data or function created is then accessed by your PDF. This file will need to be installed on each user's system.
http://www.acrobatusers.com/forums/aucbb/viewtopic.php?pid=30444

Can I automate the creation of a cluster in LabView using the data structure created in an autogenerated .CSV, C header, or XML file?

Can I automate the creation of a cluster in LabView using the data structure created in an auto generated .CSV, C header, or XML file? I'm trying to take the data structure defined in one or more of those files listed and have LabView automatically create a cluster with identical structure and data types. (Ideally, I would like to do this with a C header file only.) Basically, I'm trying to avoid having to create the cluster by hand, as the number of cluster elements could be very large. I've looked into EasyXML and contacted the rep for the add-on. Unfortunately, this capability has not been created yet. Has anyone done something like this before? Thanks in advance for the help.
Message Edited by PhilipJoeP on 04-29-2009 04:54 PM
Solved!
Go to Solution.

smercurio_fc wrote:
Is this something you're trying to do at runtime? Clusters are fixed data structures so you can't change them programmatically. Or, are you just trying to create some typedef cluster controls so that you can use them for coding? What would your clusters basically look like? Perhaps another way of holding the information like an array of variants?
You can try LabVIEW scripting, though be aware that this is not supported by NI.
Wow! Thanks for the quick response! We would use this cluster as a fixed data structure. No need to change the structure during runtime. The cluster would be a cluster of clusters with multiple levels. There would be not pattern as to how deep these levels would go, or how many elements would be in each. Here is the application. I would like to be able to autocode a Simulink model file into a DLL. The model DLL would accept a Simulink bus object of a certain data structure (bus of buses), pick out which elements of the bus is needed for the model calculation, and then pass the bus object. I then will take the DLL file and use the DLL VI block to pass a cluster into the DLL block (with identical structure as the bus in Simulink). To save time, I would like to auto generate the C header file using Simulink to define the bus structure and then have LabView read that header file and create the cluster automatically. Right now I can do everything but the auto creation of the cluster. I can manually build the cluster to match the Simulink model bus structure and it runs fine. But this is only for an example model with a small structure. Need to make the cluster creation automated so it can handle large structures with minimal brute force. Thanks!

Dynamically populating more than one field using xml data binding

Hi All, I have the following code that works fine to dynaically populate a second drop-down list2 from a choice in drop-down list1 using xml data biding. var tempString = "xfa.record." + this.boundItem(xfa.event.newText); var oItems = xfa.resolveNode(tempString); var nItemsLength = oItems.nodes.length; myinfo.page1.state.clearItems(); myinfo.page1.state.rawValue = null; for (var nItemCount = 0; nItemCount < nItemsLength; nItemCount++) { myinfo.page1.state.addItem(oItems.nodes.item(nItemCount).value); } Here is my xml file <?xml version="1.0" encoding="UTF-8"?> <myinfo> <country/> <countries> <item uiname="United States" token="US"/> <item uiname="South Africa" token="SA"/> <item uiname="Australia" token="AU"/> </countries> <state/> <AU> <item>Australian Capital Territory</item> <item>New South Wales</item> <item>Northern Territory</item> <item>Queensland</item> <item>South Australia</item> <item>Tasmania</item> <item>Victoria</item> <item>Western Australia</item> </AU> <US> <item>California</item> <item>New York</item> <item>Texas</item> <item>Michigan</item> <item>North Carolina</item> <item>South Carolina</item> </US> <SA> <item>Eastern Cape</item> <item>Free State</item> <item>Gauteng</item> <item>KwaZulu-Natal</item> <item>Limpopo</item> <item>Mpumalanga</item> <item>Northern Cape</item> <item>North-West</item> <item>Western Cape</item> </SA> </myinfo> I have two questions: 1) I want to be able to structure my xml in a way that I can populate a third drop-down list3 from a choice in list2. I need to know how to to include the different capital cities of the states in my xml data so that they can get populated in list3 from a selection in list2; 2) And be able to script the third list3 to get dynamically populated from a choice in list2. Thanks in advance for your help.

I would like to ask someone for help.
I have an XML file a result of the XSLT transformation. A schema was created based on this XML and this schema is bound to a form as a data source. When I preview my form using a Preview tab with transformed XML as a Data File in LiveCycle Designer 8.1, I can see only the first form data across 3 Text fields on the form. The rest of the forms are not getting displayed. What am I doing wrong?
Here is the part of the XML file Im trying to display on the form:
 FORM 1
 FORM 1 DESCRIPTION
 $5000
 FORM 2
 FORM 2 DESCRIPTION
 $7000
 FORM 3
 FORM 3 DESCRIPTION
 $4000
Part of the schema that was created based on the XML file from above:
Thank you.

Creating a dynamic jtree using datas retrieved by dom in xml parsing

help me with code to create a dynamic jtree using data retrieved as nodes by xml parsing using dom

Ok, so you want to make a tree. To determine the data that appears in a tree, you have to make a custom tree model. The API for this is at :
http://java.sun.com/j2se/1.4.2/docs/api/
A tutorial for using trees is at :
http://java.sun.com/docs/books/tutorial/uiswing/components/tree.html
I assume you are going to be using Nodes, since you are using XML. For this I might start with something like
class NodeTreeModel implements TreeModelI would then implement the 'getChildCount()' as the number of subnodes a node has, and the value of a tree node to the nodes value.
Hope that starts you off.

Dynamically update swf file in sharepoint using xml data

Hi,
I need some help/enlightenment on how to auto-update the swf file in sharepoint using xml data.
I am encountering an error "Cannot access External Data" and pointing to adobe's Cross-domain policy file extension.
My questions is:
1. Where should the cross-domain file be copied? In the sharepoint webserver's root folder?
Right now, we generate the swf file from xcelsius and manually upload them in the sharepoint. However, we wish to automate the data content of this file.
Thanks for the help.
Emerson

GetFileByServerRelativeUrl.... since you're getting a FILE, you'll need a URL to a FILE (not just a library)... by SERVER relative URL, so you'll need to include the site collection path and such, not just the subsite relative URL.
Now working fine....
url: appweburl + "/_api/SP.AppContextSite(@target)/web/ GetFileByServerRelativeUrl('/sites/apps/Shared Documents/test.txt')/CheckOut()?@target='" + hostweburl + "'",
method: "POST",
data: metatdata,

File Receiver - Dynamically create filename from data in payload

Hi there.
Can anyone tell me the approach I need to take to be able to use the data in one field to determine the filename in the file receiver adaptor.
I have a requirement that requires that I save a file with the following mask:
xxxx_xxx<date extracted from field in payload>.csv
I would appreciate any help on this.
Thanks in advance.
Mick.

Hi Mick,
you just need to use adapter specific parameters
and you will be able to set the name in your mapping
(from your payload)
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Dynamic sql reurns no data when multiple values are passed.

(Dynamic sql returns no data when multiple values are passed.)
Hi,
While executing the below dynamic sql in the procedure no data is returned when it has multiple input values.
When the input is EMPID := '1'; the procedure works fine and returns data.Any suggestion why the procedure doen't works when input as EMPID := '1'',''2'; is passed as parameter?
=======================================================
create or replace PROCEDURE TEST(EMPID IN VARCHAR2, rc OUT sys_refcursor)
IS
stmt VARCHAR2(9272);
V_EMPID VARCHAR2(100);
BEGIN
V_EMPID :=EMPID;
stmt := 'select * from TEST123 where Empid is NOT NULL';
IF V_EMPID <> '-1' THEN
stmt := stmt || ' and Empid in (:1)';
ELSE
stmt := stmt || ' and -1 = :1';
END IF;
OPEN rc FOR stmt USING V_EMPID;
END Z_TEST;
============================================================
Script for create table
==================================================================
CREATE TABLE TEST123 (
EMPID VARCHAR2(10 BYTE),
DEPT NUMBER(3,0)
===========================================
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('1',20);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
=============================================
Select * from TEST123 where Empid in (1,2,3)
EMPID DEPT
1 20
2 10
3 30
3 30
2 10
===================================================================
Any suggestion why the procedure doen't works when input EMPID := '1'',''2';?
Thank you,

The whole scenario is a little strange. When I tried to compile your procedure it couldn't compile, but I added the missing info and was able to get it compiled.
create or replace PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
IS
stmt VARCHAR2 (9272);
V_EMPID VARCHAR2 (100);
BEGIN
V_EMPID := EMPID;
stmt := 'select * from TEST123 where Empid is NOT NULL';
IF V_EMPID = '-1' THEN
 stmt := stmt || ' and Empid in (:1)';
ELSE
 stmt := stmt || ' and -1 = :1';
END IF;
OPEN rc FOR stmt USING V_EMPID;
END;If you pass in 1 as a parameter, it is going to execute because the statement that it is building is:
select * from TEST123 where Empid is NOT NULL and -1 = 1Although the syntax is valid -1 will never equal 1 so you will never get any data.
If you pass in 1,2 as a parameter then it is basically building the following:
select * from TEST123 where Empid is NOT NULL and -1 = 1,2This will cause an invalid number because it is trying to check where -1 = 1,2
You could always change your code to:
PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
IS
stmt VARCHAR2 (9272);
V_EMPID VARCHAR2 (100);
BEGIN
V_EMPID := EMPID;
stmt := 'select * from TEST123 where Empid is NOT NULL';
stmt := stmt || ' and Empid in (:1)';
OPEN rc FOR stmt USING V_EMPID;
END;and forget the if v_empid = '-1' check. If you pass in a 1 it will work, if you pass in 1,2 is will work, but don't pass them in with any tick marks.

Error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element

Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.

Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice.

Creation of a dynamic Form layout

[Required Layout|http://imgur.com/aX3hR]
Hi All,
I am trying to create a dynamic layout using Apex as shown in the above link.
The required functionality is to allow the user to select the database (note only 2 shown but there are several), this would then update the Db field which would then update the table field dynamically.
Each database has the same structure but is located on a different machine.
I have created a database link to allow access to them and then created a view
create or replace view sec_app_build11m
as select * from sec_applications@build11m;
The tabular form which will allow the update of the data on the remote database via the database link is populated thus:
select
"APP_NAME",
"APP_NAME" APP_NAME_DISPLAY,
"APP_DESC",
"APP_VERSION",
"APP_VSN_DATE",
"APP_OMEGA",
"APP_KEY",
"APP_KEY2"
from "#OWNER#"."SEC_APP_BUILD11M"
My problem is that as soon as I try and change the from clause to be dynamic and reference the DB field:
from &P9_DB.
it produces an Oracle error:
1 error has occurred
Query cannot be parsed within the Builder. If you believe your query is syntactically correct, check the ''generic columns'' checkbox below the region source to proceed without parsing. ORA-00903: invalid table name
I am new to Apex and think that this may not be possible to achive in Apex so before I spend a lot of time trying to figure it out I thought I would ask for advice.
Many Thanks
Dave

Dave,
You could use a function returning SQL (for classic report only)
Declare
v_q varchar2(4000);
begin
v_q := 'select "APP_NAME","APP_NAME" APP_NAME_DISPLAY,"APP_DESC","APP_VERSION","APP_VSN_DATE","APP_OMEGA","APP_KEY","APP_KEY2"from '|| :P9_DB;
return v_q;
end;Robert
http://apexjscss.blogspot.com

Problem with creation of dbadapter in jdeveloper using only jndi

Hi,
I´m new in this forum and first would like thank for the opportunity.
My problem is that have an application where i need to create a dbadapter for to connect a database.
I´m using bpel.
Would like known if there is a way of to make this without creating a local dbconnection in my project. I´m want to use only jndi that is in my Aplication Server.
For example : At the moment of creation of dbadapter, the wizard give me a dbconnection and below the jndi, is not possible i to create this connector using only the JNDI?
Thanks.

Hi,
Try using Open Data Set file for output to load in to application server.
The GUI_DOWNLOAD only gets the data to the presentation server,.
I think you are expecting the file in AS running GUI_Download gets only to Presentation Server.
Thanks & Regards,
Vishnu

Automatic file generation using system date and time

Hi guys,
Iam trying to generate a path for file creation automatically using System date and time. I am running into errors with respect to special characters in filename. I am trying to parse the string to get date and time without the '/' and ':' but have not been successful. is there a better way to do it? Please help! I am trying to avoid a dialog box for user to enter a filename.
Thanks!
V
I may not be perfect, but I'm all I got!
Solved!
Go to Solution.

here is a little experiment .... building the path out of %m (month) %d (day) %(year) type stuff might help.
Attachments:
putting time in path.vi ‏7 KB

Creation of Semi-Dynamic TBOMs using UPL data

Similar Messages

Maybe you are looking for