Creative Zen 40Gb - touchpad AND buttons not work

Orite all, my names tom, n i got my creative zen last october...after about a month or 2, the touch pad would only go down, then it stopped working completely. gradually, none of the buttons worked except the buttons on the right (not including the play button). To add insult to injury, the validation of purchase i had was thrown in the bin as well as the guarantee.Brilliant, and the jack is broken too. Is there anything <EM>at all </EM>i can do?! or any advice for<EM> attempting </EM>to fix the product? help would be brilliant

Did you buy the player on credit or debit card? Creative will typically accept this as proof of purchase.
All you can do is get the player repaired by Creative, whether under warranty or not.

Similar Messages

  • T30 freezing issues and Touchpad & Trackpoint buttons not working.

    Firstly I'll explain the freezing issue (this is now the 3rd time I've typed this, as the first two times my laptop froze before I finished!)
    I run my laptop with the battery at 100% and plugged in and that's fine; as is running it on battery. The problem arises when my battery is low and I plug it into recharge. Soon after it's running on a/c the screen will go black and only way to shut down is by holding the power button. If I try to restart it too soon, the indicator lights next to the power button will illuminate, but the screen will stay black. Usually after 5-10 minutes it'll boot to the IBM screen & boot the rest of the way, but not too long into normal operation it'll go black again (sometimes hitting ctrl/alt/del will bring the screen back but it would be very distorted (pixilized) and would go black again and reboot. What could be causing these problems while recharging the battery? I've tried this with a couple different batteries (both OEM IBM) and it does it with both.
     Secondly, both left and right "mouse" buttons are now nonfunctional (though the middle button of the track points works.) I have the latest version of Ultranav Wizard and all the buttons are enabled. The touch pad and trackpoint ball work fine, just the 2 left and 2 right buttons do not. What could be the culprit for this issue? Luckily I have a usb mouse so that's what I'm using for the time being.
    Message Edited by GoalieFergy53 on 02-14-2009 02:30 PM

    My T42p Touchpad and Trackpoint work fine however,
    the buttons are not responding properly.
    I'm forced to use an optical mouse to properly maneuver when working on
    the screen.
    When the well is dry, we'll all know the value of water.

  • Touchpad Scroll-buttons not working properly

    Hello all,
    I was not sure if this is actually a Desktop Environment or Hardware problem, but since it's hardware related I will post it here.
    The problem:
    On my touchpad (on Acer Aspire 5610Z) I have scroll button for up/down/left/right and until a recent update the scroll buttons need to be clicked repeatably in order to scroll. Before the upgrade and the way I'm expecting to behave is that when I click and hold a button - it should repeat the scroll (I hope you are able to understand it). So basically my problem is that to scroll with the scroll-buttons I have to click it numerous times in order to scroll, instead of just holding the button pressed.
    At the same time all other features like two-finger scrolling, gestures etc. are working, but I'm not used to scroll with two fingers and would like to have my scroll-buttons working.
    Here is some information about the configuration:
    10-synaptics.conf
    Section "InputClass"
    Identifier "touchpad catchall"
    Driver "synaptics"
    Option "SHMConfig" "on"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    Option "VertEdgeScroll" "on" # enable vertical scroll zone
    Option "HorizEdgeScroll" "on" # enable horizontal scroll zone
    Option "VertTwoFingerScroll" "on" # vertical scroll anywhere with two fingers
    Option "HorizTwoFingerScroll" "on" # horizontal scroll anywhere with two fingers
    EndSection
    Output of synclient -l
    Parameter settings:
    LeftEdge = 1752
    RightEdge = 5192
    TopEdge = 1620
    BottomEdge = 4236
    FingerLow = 25
    FingerHigh = 30
    FingerPress = 256
    MaxTapTime = 180
    MaxTapMove = 221
    MaxDoubleTapTime = 180
    SingleTapTimeout = 180
    ClickTime = 100
    FastTaps = 0
    EmulateMidButtonTime = 75
    EmulateTwoFingerMinZ = 282
    EmulateTwoFingerMinW = 7
    VertScrollDelta = 100
    HorizScrollDelta = 100
    VertEdgeScroll = 1
    HorizEdgeScroll = 1
    CornerCoasting = 1
    VertTwoFingerScroll = 1
    HorizTwoFingerScroll = 1
    MinSpeed = 1.6
    MaxSpeed = 1.75
    AccelFactor = 0.087
    TrackstickSpeed = 40
    EdgeMotionMinZ = 30
    EdgeMotionMaxZ = 160
    EdgeMotionMinSpeed = 1
    EdgeMotionMaxSpeed = 401
    EdgeMotionUseAlways = 0
    UpDownScrolling = 1
    LeftRightScrolling = 1
    UpDownScrollRepeat = 1
    LeftRightScrollRepeat = 1
    ScrollButtonRepeat = 100
    TouchpadOff = 0
    LockedDrags = 0
    LockedDragTimeout = 5000
    RTCornerButton = 0
    RBCornerButton = 0
    LTCornerButton = 0
    LBCornerButton = 0
    TapButton1 = 1
    TapButton2 = 2
    TapButton3 = 3
    ClickFinger1 = 1
    ClickFinger2 = 1
    ClickFinger3 = 1
    CircularScrolling = 0
    CircScrollDelta = 0.100007
    CircScrollTrigger = 0
    CircularPad = 0
    PalmDetect = 0
    PalmMinWidth = 10
    PalmMinZ = 200
    CoastingSpeed = 20
    CoastingFriction = 50
    PressureMotionMinZ = 30
    PressureMotionMaxZ = 160
    PressureMotionMinFactor = 1
    PressureMotionMaxFactor = 1
    GrabEventDevice = 1
    TapAndDragGesture = 1
    AreaLeftEdge = 0
    AreaRightEdge = 0
    AreaTopEdge = 0
    AreaBottomEdge = 0
    HorizHysteresis = 25
    VertHysteresis = 25
    ClickPad = 0
    Output of xinput list :
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Sleep Button id=9 [slave keyboard (3)]
    ↳ USB2.0 Camera id=10 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=11 [slave keyboard (3)]
    And the last upgrade since the scroll buttons stopped working:
    [2012-03-14 08:15] upgraded chromium (17.0.963.78-1 -> 17.0.963.79-1)
    [2012-03-14 08:15] > Updating desktop mime database...
    [2012-03-14 08:15] upgraded eric (5.1.8-1 -> 5.2.0-1)
    [2012-03-14 08:15] upgraded freetype2 (2.4.8-1 -> 2.4.9-1)
    [2012-03-14 08:15] upgraded git (1.7.9.3-1 -> 1.7.9.4-1)
    [2012-03-14 08:15] upgraded glproto (1.4.14-1 -> 1.4.15-1)
    [2012-03-14 08:15] upgraded grep (2.11-1 -> 2.11-2)
    [2012-03-14 08:15] upgraded gstreamer0.10 (0.10.35-1 -> 0.10.36-1)
    [2012-03-14 08:15] upgraded gstreamer0.10-base (0.10.35-1 -> 0.10.36-1)
    [2012-03-14 08:15] upgraded gstreamer0.10-base-plugins (0.10.35-1 -> 0.10.36-1)
    [2012-03-14 08:15] upgraded gstreamer0.10-good (0.10.30-2 -> 0.10.31-1)
    [2012-03-14 08:15] upgraded gstreamer0.10-good-plugins (0.10.30-2 -> 0.10.31-1)
    [2012-03-14 08:15] upgraded xcb-proto (1.6-2 -> 1.7-2)
    [2012-03-14 08:15] upgraded libxcb (1.7-2 -> 1.8.1-1)
    [2012-03-14 08:15] upgraded libx11 (1.4.4-1 -> 1.4.99.1-1)
    [2012-03-14 08:15] upgraded libxt (1.1.2-1 -> 1.1.2-2)
    [2012-03-14 08:15] upgraded imagemagick (6.7.5.3-1 -> 6.7.6.0-1)
    [2012-03-14 08:15] upgraded inputproto (2.0.2-1 -> 2.2-1)
    [2012-03-14 08:15] upgraded libglapi (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:15] upgraded libgl (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:15] upgraded intel-dri (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:16] upgraded kdebase-runtime (4.8.1-1 -> 4.8.1-2)
    [2012-03-14 08:16] upgraded khrplatform-devel (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:16] upgraded libegl (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:16] upgraded libgles (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:16] Users no longer need to be in the 'camera' group to use camera devices
    [2012-03-14 08:16] upgraded libgphoto2 (2.4.11-1 -> 2.4.13-1)
    [2012-03-14 08:16] upgraded libnids (1.24-1 -> 1.24-2)
    [2012-03-14 08:16] upgraded libpciaccess (0.12.1-1 -> 0.13-1)
    [2012-03-14 08:16] upgraded libtiff (4.0.0-1 -> 4.0.1-1)
    [2012-03-14 08:16] upgraded libxft (2.3.0-1 -> 2.3.0-2)
    [2012-03-14 08:16] upgraded libxi (1.4.5-1 -> 1.6.0-1)
    [2012-03-14 08:16] upgraded man-pages (3.36-1 -> 3.37-1)
    [2012-03-14 08:16] upgraded mesa (7.11.2-1 -> 8.0.1-2)
    [2012-03-14 08:16] upgraded mpfr (3.1.0.p3-1 -> 3.1.0.p7-1)
    [2012-03-14 08:16] upgraded oxygen-gtk2 (1.2.1-1 -> 1.2.2-1)
    [2012-03-14 08:16] upgraded oxygen-gtk3 (1.0.1-1 -> 1.0.2-1)
    [2012-03-14 08:16] upgraded poppler (0.18.3-2 -> 0.18.4-1)
    [2012-03-14 08:16] upgraded poppler-glib (0.18.3-2 -> 0.18.4-1)
    [2012-03-14 08:16] upgraded poppler-qt (0.18.3-2 -> 0.18.4-1)
    [2012-03-14 08:16] upgraded python-configobj (4.7.2-3 -> 4.7.2-4)
    [2012-03-14 08:16] upgraded python-pygments (1.4-5 -> 1.5-1)
    [2012-03-14 08:16] upgraded python2-pygments (1.4-5 -> 1.5-1)
    [2012-03-14 08:16] upgraded ruby (1.9.3_p125-1 -> 1.9.3_p125-2)
    [2012-03-14 08:16] upgraded skype (2.2.0.35-2 -> 2.2.0.35-3)
    [2012-03-14 08:16] upgraded xf86-input-evdev (2.6.0-4 -> 2.7.0-1)
    [2012-03-14 08:16] upgraded xf86-input-synaptics (1.5.0-1 -> 1.5.99-0.2)
    [2012-03-14 08:16] upgraded xf86-input-vmmouse (12.7.0-3 -> 12.8.0-1)
    [2012-03-14 08:16] upgraded xf86-video-intel (2.17.0-2 -> 2.18.0-1)
    [2012-03-14 08:16] upgraded xf86-video-vmware (11.1.0-1 -> 12.0.0-1)
    [2012-03-14 08:16] upgraded xorg-server-common (1.11.4-1 -> 1.12.0-1)
    [2012-03-14 08:16] upgraded xorg-server (1.11.4-1 -> 1.12.0-1)
    [2012-03-14 08:16] upgraded xorg-xinput (1.5.3-2 -> 1.5.99.1-1)
    [2012-03-14 10:51] Running 'pacman -S gimp-devel'
    [2012-03-14 10:52] Running 'pacman -S extra/gimp-devel'
    [2012-03-14 10:52] Running 'pacman -Syy'
    [2012-03-14 10:52] synchronizing package lists
    [2012-03-14 10:54] Running 'pacman -S extra/gimp-devel'
    [2012-03-14 10:55] Updating font cache... done.
    [2012-03-14 10:55] installed gsfonts (1.0.7pre44-3)
    [2012-03-14 10:55] installed libwmf (0.2.8.4-9)
    [2012-03-14 10:55] installed babl (0.1.6-1)
    [2012-03-14 10:55] installed gegl (0.1.8-2)
    [2012-03-14 10:55] installed gimp-devel (2.7.5-1)
    [2012-03-14 11:01] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.26J/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
    [2012-03-14 11:02] installed gimp-photoshop-brush (1.0-1)
    [2012-03-14 11:02] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.Jc0/gimp-photoshop-brush-1.0-1-i686.pkg.tar.xz'
    [2012-03-14 11:02] upgraded gimp-photoshop-brush (1.0-1 -> 1.0-1)
    [2012-03-14 11:03] Running 'pacman -S --asdeps --needed extra/perl-xml-parser extra/intltool'
    [2012-03-14 11:03] installed perl-xml-parser (2.41-2)
    [2012-03-14 11:03] installed intltool (0.50.1-1)
    [2012-03-14 11:03] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.GVM/gimp-plugin-saveforweb-0.29.3-1-i686.pkg.tar.xz'
    [2012-03-14 11:03] installed gimp-plugin-saveforweb (0.29.3-1)
    [2012-03-14 11:04] Running 'pacman -U /tmp/yaourt-tmp-vladi/PKGDEST.OX1/gimpfx-foundry-2.6_1-2-i686.pkg.tar.xz'
    [2012-03-14 11:04] installed gimpfx-foundry (2.6_1-2)
    [2012-03-14 20:27] Running 'pacman -Syy'
    [2012-03-14 20:27] synchronizing package lists
    [2012-03-14 20:30] Running 'pacman -Syu'
    [2012-03-14 20:30] synchronizing package lists
    I thank you in advance for your suggestions

    I'm afraid the problem is in driver.
    I compared sources of input-synaptics 1.6.3 and 1.7.0 and it seems that author has cut off the functionality of "repeating" scrollbuttons
    Here's the announce of this new version:
    http://lists.freedesktop.org/archives/x … 55593.html
    And we can read there: "Purge scrollbuttons (repeat)".
    Strange decision I think...

  • Hp DV6 TouchPad Lock Button Not Working Please Help.?

    I just bought my hp dv6 6c4se entertainment notebook. but the touchpad on and off button is not working.please help.yes there is a little white sqaure in the left up corner of the touchpad.but it doesnt work.please help somebody

    Try a Hard Reset to gently "kick" that TouchPad back into operation.
    HP Notebook PCs - Use a Forced Reset to Resolve Hardware and Software Issues on Notebook with a Seal...
    Removable Battery:
    HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
    Kind Regards,
    Dragon-Fur

  • Touchpad and touchscreen not working-Satellite C55Dt-B5205

    I just purchased a Satellite C55Dt-B5205 on Tuesday, ran all the updates, and everything was working fine. I upgraded to Windows 10, and now my touchpad and the left/right buttons do not work at all. The touchscreen works on everything except only intermittently on the Google Chrome browser (at least everything that I've tried). I have tried enabling the touchpad, but it says it's already enabled. So then I tried turning my computer off, unplugging everything, taking the battery out, and holding the power key for 30 seconds. That didn't work either. (It was an idea I found online.) I've also tried the F5 button, that does nothing also. The touchpad DOES work when I restart the computer, at the screen where I have to sign in to the computer, but once I sign in, it not longer works.Any help would be greatly appreciated, and just FYI, I'm not hugely computer savvy, so clear instructions would be better.

    I did some research last night. On Tom's hardware forum under post "Touchpad scroll not working - Windows 10" yoko_oh_no had a similar issue with their Satellite M-50-A and solved the problem with an earlier version of Elantech touchpad drive "Elantech_Touchpad_11.8.24.6". I've downloaded (from elsewhere) and installed this driver* 11.8.24.6 and all's fine on Windows 8.1 but I don't particularly want to re-install Windows 10 on my Satellite S50D-B-100 and find I've still got a problem with a non functioning touchpad. Perhaps someone who currently has Win 10 on their Satellite with a non working touchpad could give it a go? Important: Before trying the above first of all ensure that you have an Elan touchpad - not a Synaptics touchpad.Go to Control Panel and search for device manager, click on "Mice and other pointing devices" and check that it says Elan PS/2_SMBus Port Input Device or similar. *The only Elan downloadable drivers that showed for Satellite S50-B family on Toshiba Support (Computer Support -> Download Drivers) for my 64 bit Windows 8.1 were 11.8.22.3 and 11.8.29.5

  • Click boxes and buttons not working in Captivate 3 published projects

    I really, really, hope that someone can help me...
    we are migrating from Centra/Saba LMS to Connect Pro LMS and while taking our "old" SCORM projects and posting them to the Connect Pro server we have encountered an issue...and the reason it's very hard to trouble shoot is that it's not all of the projects....??
    Once a project is pulished none of the buttons or click boxes are working - for instance we use a play button on the frist slide for students to enter the course - you click it nothing happens (except when you mouse over the button it does change color)...same with the click boxes - I can use the progress bar to move froward but anything I click just doesn't respond...
    Has anyone encountered this? and I hope know something we can do?
    THANKS SO MUCH,
    Jen

    Do your published projects work outside of your LMS?
    Or is it just inside the new LMS that it isn't working?
    Usually buttons and click boxes not working is because your slides are pausing before the button becomes active.
    What version of Captivate and Flash are you using?

  • Touchpad and Keyboard not working (including external devices)

    Hi,
    I am using an rmbp with win7 and macosx.
    Win7 on my bootcamp partition was working perfectly(4 months+) until now .I restarted my system  and realized that the touchpad and keyboard are not working(inluding external mice/keyboard).I can boot into Macosx and the mouse and keyboard are working perfectly so its not a hardware problem.I havent set any restore points and have tried all the other recovery options (using f8 before booting) but to no avail
    I have read some other solutions which involved opening the device manager but I cannot press anything when I login to windows.Does anybody have any idea except reinstalling windows? I would really appreciate any help !
    Cheers

    I have even loaded my Bootcamp partition in parallels ,in hopes of repairing the installation from there but Parallels give an error about mouse coherence and I cannot use my keyboard and mouse there .
    Does anyone have any other idea except reinstalling windows ? .Thanks !

  • Touchpad and Fingerprint not working

    Hello, I own a lenovo T61 for over 6 months and evrything worked fine until about a week ago.
    Since then, both the touchpad and the fingerprint sensor  device have failed to work. tried unistalling and reinstalling the devices but its like they are not present as hardware in the system. 
    When I try to install the finger print software I get the following error: "Cannot find fingerprint sensor device".
    When I try reinstalling the UltraNav utility I get "This program can be installed on an Ultranav model system only".
    I would really appreciate your help into this matter.
    Thank you

    Welcome to the forum!
    Let's try to distinguish whether this is a software issue or a hardware malfunction...
    Download and burn a copy of a "live" Linux CD and boot from it.
    If UltraNav works, you have a problem within Windows.
    If it doesn't, it's a hardware malfunction and your warranty provider should be contacted.
    A distro that will work "out of the box" on any newer ThinkPad:
    http://www.linuxmint.com/edition.php?id=25
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • V9 error and touchpad and charger not working

    Hi all,
    Since 2 days my touchpad and my charger of my laptop(hp pavilion g6) aren't working anymore. When i start google chrome i automatically go to the website v9.com (which is a virus, according to google). Does anybody got suggestions on how I can solve this issue?
    I tried entering bios and resetting the default data. That helped for 1 day, but now i have the same problem again, and resetting doesn't help anymore.
    I would be really glad with any tips.

    Hi all,
    Since 2 days my touchpad and my charger of my laptop(hp pavilion g6) aren't working anymore. When i start google chrome i automatically go to the website v9.com (which is a virus, according to google). Does anybody got suggestions on how I can solve this issue?
    I tried entering bios and resetting the default data. That helped for 1 day, but now i have the same problem again, and resetting doesn't help anymore.
    I would be really glad with any tips

  • Touchpad and keyboard not working at startup

    i am having lenovo g series 460 machine
    the machines touchpad and keyboard doesnt get detected at startup .. it continues for approx. 10 minutes and after it works fine..
    what wil be the posssible pblm with my notebook.
    i feels like the touchpad and keyboard are only working when the system was heated up..
    pls help

    one interesting thing i observed is that a usb mouse or usb keyboard is working nicely at the startup itself

  • HP Elitebook 6930p - Touchpad and keyboard not working with Windows 7

    Hi all,
    I have 6930p, installed Vista Bussines from factory installation and upgraded it to Windows 7 Ultimate. It all went fine, all devices worked. After the first restart, keyboard and touchpad stop responding. I attached USB mouse and keyoboard, and found errors in device manager for these two devices. I tryed to uninstall them and reinstall, but all I get is errors:
    http://img63.imageshack.us/i/47752933.png/
    http://img7.imageshack.us/i/71062213.png/
    In device manager I have the same error message, and devices are listed as unknown.
    When I try to use windows update, it finds the drivers I need but it can not install them.
    http://img193.imageshack.us/i/71145406.png/
    The OS is 32bit, Windows 7 Ultimate. I can not get it work, please help or reffer me to some other place where I can try to find a solution.
    Thanks in advance.

    Hi,
    All driver for Win7 are avaible for Your model here.
    To solve Your problem with keyboard install HP Quick Lunch Buttons.
    To solve Your problem with touchpad install Synaptics touchpad.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Touchpad and Keyboard not working

    For the last 2 weeks my keyboard and touchpad has not been working when I load onto the log in screen on Windows. The keyboard works while the computer is loading but once the log in screen comes up, I can not use both. I have tried taking the battery out and holding the power button and hitting F7 when the computer is loading but neither of them makes my touchpad or keyboard work. I can choose Safe Mode when the computer is loading but neither will work after Windows load. There was an update that completed two weeks ago and it started afterward.
    I have a HP Pavillion Dv6t - 1200
    Product Number FV161AV
    I need to know how can this be fixed and IF it is worth fixing.
    Thanks in  advance

    turn on the notebook while its turning on or booting up keep on tapping F8 button there will be options on how you want to boot the notebook choose safemode with command prompt, test your keys there and touchpad if it works most probably that your system got a malware that made the keyboard & touchpad malfunction... you got 2 options you could perform system restore but after a while the issue will exist or you could perform recovery but will wipe out all the information on the notebook (it will revert the notebook back to factory default condition) better to back up all  your data.
    there is no harm in trying, just always give your best shot!!!

  • Red battery showing but not charging and button not working

    My daughters iphone 3G is showing a red battery when plugged in but not charging, it always shows 20%.  Also the button isn't working, so I can't reboot.  I have plugged it into the PC and it doesn't recognise the device?? what is going on with this?

    same problem here, on the Black MacBook, purchased in April 2008.
    0% icon and the green lid.
    I tried restarting, reseting etc ... without any success.

  • Flex 3 -1470 Touchpad and keyboard not working at the same time

    Hi, I'm using a Flex 3 -1470 and whenever I press a key on the keyboard the touchpad becomes disabled. I've tried googling a solution and have the latest drivers from the Lenovo website but nothing seems to work. I've also tried editing the ALPS touchpad registry fix but it didn't work. Any help in resolving this issue would be greatly appreciated.

    Dear Cecilia,
    Have you found a solution to this problem? I think we ran into it as well. We are using SAP BI 7.0 SP14.
    When we're trying to apply a conversion to a field that is plannable and contains a value in another currency then the currency translation is not performed, we cannot see any value.
    Thanks,
    Gabor

  • HELP! Thinkpad T430u touchpad and touchpoint not working

    I was able to fix it with a reboot at first, but then it just died on me. I suspect there was a problem with the driver, but I'm not sure. The USB mouse is working though. There was a "touch keyboard" option in the status bar which made me think that Windows 8 kicked itself into tablet mode???

    Hi, wh1568
    Your computer may think that it is in tablet mode, hence the non-functioning mice and touch keyboard option. I would first recommend making sure that all drivers and the BIOS are up to date to possibly solve the issue. At the very least, fully updated drivers will rule them out as a possibility if the issue still persists. All drivers for your machine can be found here. If none of those help, then try installing the Synaptics driver for your mice that can be found here.
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Maybe you are looking for