Credit data Message no. V1677

Hello experts,
After entering VA32, I press enter. A message pops up below. Why such a message pops up? You know, I have not changed anything as I just press enter. If I change price / payment terms, any impact? Thanks.
"Credit data will not be redetermined
Message no. V1677
Diagnosis
Because the document has changed, new credit data, new payer data or another credit control area has been created.
System Response
The system will not create any new credit data."

I believe, if there is a change in Credit Control Area, then system will pop up this message. If not, have a look at the following notes:-
Note 1587661 - External number assignment: Error message V1 677 displayed
Note 432507 - Credit status is lost after the payer is changed
G. Lakshmipathi

Similar Messages

Reorganization of Credit data :

Dear SAP Experts ,
We have changed the Risk categories of some of the CUstomers . Now I have run the reorganization of the Credit Data.
We have the following Message the NEw Credit Limit was created.
Where can I view that what was changed and of which CUstomers.
regards,
A S

Dear Gurunadh Kollipara,
I have recreated the FI and SD data for the reorganization.
Now in the FCV3 Report I can see there is double entry in the of all the Customers.
The Payer Column there is one entry X and the other is Blank for each Customer.
*The following is the help documents of the P( Payer:)
FI checks only against current payer
Indicates that credit checks against open items, oldest open item, and the highest dunning level are carried out using the open items and the dunning level of only the current payer (and not with data from all payers who are assigned to the credit customer).
Note
This is only the case if the payer is copied into the document on the basis of the partner determination procedure.*
Why there is dual entry the report for all Customers.
Please explain.
Edited by: SAP Consultant on Dec 9, 2008 12:02 PM
Edited by: SAP Consultant on Dec 9, 2008 12:23 PM

ORDERS05 IDOC - ZTERM "Critical credit data changed" problem

Hello everyone!
I have configured a scenario where XI sends an IDOC (ORDERS.ORDERS05) to an SAP system to create a Sales Order (SO).
I have a problem with the Payment Terms (...EDI_DC40/ZTERM) field. Whenever I send an SO with the ZTERM field mapped, I get an error "Critical credit data changed" and as a result, the SO is not created; however, when I leave the field blank, the message goes through successfully.
Apparently, a popup saying "Critical credit data changed" shows even when creating SOs manually. My question is this, is there any way I can bypass this message through XI, so that I can create the SO with the ZTERM field populated? Are there any qualifiers I should be looking into?
Looking forward to your responses!
Warm regards,
Glenn

Hello Anil,
Thank you very much for your reply! Unfortunately, that configuration is part of the auto credit checking. When I create SOs manually and change the payment terms field, a popup says "Critical credit data changed", I can simply tick the 'check' mark and the SO saves. However, if the SO is sent via XI, the popup causes an error. Is there any information we can provide in the IDOC so that it bypasses those kinds of popup messages?

Error while deleting master data (Message no. RSDMD118)

Dear all,
I am performing a test to create and delete new Company Codes in Consolidation Workbench.
Creation of new Company Codes went on successfully but deleting them give me the following error message upon saving:
Error while deleting master data
Message no. RSDMD118
Since they are new Company Codes, they have not been used and stored in any BW cubes. Any idea on why BCS prevents me from deleting them?
Appreciate assistance to troubleshoot and resolve this error.
Thank you.

Thank you both for your replies.
I am sure those are not the case here as I deleted the Company immediately after creating it.
Just to make sure, I performed "Where-Used List" again and BCS confirmed that it is not being used anywhere:
Use of: Company UAT1 UAT Company 1
Number of Uses Found: 0
However, the same error message was displayed again after I tried to delete the Company and save the configuration. Still can't find any solid reason behind this.

Tax Report Returns No Data [Message 131-85]

Our client has been using SBO for the past few years and run the Standard Tax Report.
They follow a standard procedure whereby they open the Tax Report enter the period details and click OK, the report returns all Input and Output Tax details.
This month they have run the report and no matter what dates you enter the report returns No Date [Message 131-85]
Does anyone have any clues as to what might be causing this?

I have discovered via a SQL trace that the following script is tun for the tax report
exec sp_executesql N'
SELECT      T0.[AbsEntry],
     T0.[Code],
     MIN(T0.[Name]),
     T0.[SrcObjType],
     T0.[DocNum],
     MIN(T0.[Category]),
     MIN(T0.[IsEC]),
     T0.[IsAcq],
     MIN(T0.[VatPercent]),
     MIN(T0.[EqPercent]),
     T0.[DocDate],
     MIN(T0.[TaxDate]),
     MIN(T0.[CANCELED]),
     SUM(T0.[BaseSum]),
     SUM(T0.[VatSum]),
     SUM(T0.[EqSum]),
     SUM(T0.[DeductSum] - T0.[EqSum]),
     MIN(T0.[SrcObjAbs]),
     N''0'',
     0,
     0,
     MIN(T0.[DocDate]),
     0,
     0,
     MIN(T0.[NumAtCard]),
     SUM(T0.[BaseSumSc]),
     SUM(T0.[VatSumSc]),
     SUM(T0.[EqSumSC]),
     SUM(T0.[DedctSumSC] - T0.[EqSumSC]),
     MIN(T0.[TaxType]),
     T0.[CrditDebit],
     MIN(T0.[CardCode]),
     MIN(T0.[CardName]),
     MIN(T0.[SrcLineNum]),
     MIN(T0.[VatDate]),
     MIN(T0.[VatIdUnCmp]),
     MIN(T0.[LicTradNum]),
     MIN(T0.[BPLicTradNum]),
     MIN(T0.[AddID]),
     SUM(T0.[BaseSum])
     FROM [dbo].[B1_VatView] T0
     WHERE (T0.[Code] = (@P1) OR
     T0.[Code] = (@P2) OR
     T0.[Code] = (@P3) OR
     T0.[Code] = (@P4) OR
     T0.[Code] = (@P5) OR
     T0.[Code] = (@P6) OR
     T0.[Code] = (@P7) OR
     T0.[Code] = (@P8) OR
     T0.[Code] = (@P9) OR
     T0.[Code] = (@P10) OR
     T0.[Code] = (@P11) OR
     T0.[Code] = (@P12) ) AND
     T0.[DocDate] >= (@P13) AND
     T0.[DocDate] <= (@P14)
     GROUP BY T0.[AbsEntry], T0.[Code], T0.[SrcObjType], T0.[DocNum], T0.[IsAcq], T0.[DocDate], T0.[CrditDebit]
     ORDER BY T0.[IsAcq] DESC,T0.[CrditDebit]',N'@P1 nvarchar(30),@P2 nvarchar(30),@P3 nvarchar(30),@P4 nvarchar(30),@P5 nvarchar(30),@P6 nvarchar(30),@P7 nvarchar(30),@P8 nvarchar(30),@P9 nvarchar(30),@P10 nvarchar(30),@P11 nvarchar(30),@P12 nvarchar(30),@P13 datetime2,@P14 datetime2',N'SEXP',N'SFRE',N'SGST',N'SNT',N'PCAF',N'PCAP',N'PFRE',N'PGNR',N'PGST',N'PGSTV',N'PNT',N'PPRI','2010-03-01 00:00:00','2010-03-31 00:00:00'
If I run this in SQL I get the following error, which mat shed some light on what is happening
Msg 2715, Level 16, State 3, Line 1
Column, parameter, or variable #13: Cannot find data type datetime2.
Parameter or variable '@P13' has an invalid data type.
Msg 2715, Level 16, State 3, Line 1
Column, parameter, or variable #14: Cannot find data type datetime2.
Parameter or variable '@P14' has an invalid data type.

Period is locked for new data [Message 131-107]

Hi all,
One of my client was faced this problem "Period is locked for new data [Message 131-107]" when they do Period-End-Closing for Year 2008 in SAP Business One 2007A Patch 42.
Can anyone help me?
Thank you.
Best regards,
danny

Hi Danny,
Check the link
Period End Closing
*Close the thread if issue solved
Regards
Jambulingam.P

RSA1 going to shortdump, ERROR: Invalid GUI input data: Message no. 00123

dear experts,
while executing RSA1 going to short dump, ERROR: Invalid GUI input data: Message no. 00123 in sap-bi 7.0
plz need help,
regards.

John,
Those are the specs of the Software Components, the backend... As we mentioned before, download the latest SAPGUI version and install it in your PC...
The latest SAPGUI can be downloaded from https://websmp204.sap-ag.de/support, go to Downloads, then "Browse the Navigation Area", on the left click "A-Z Index", then click on "G" and you'll see the "SAP GUI FOR WINDOWS" option, click on it...
You can download it from here... Please notice your OSS user needs authorization to do so... Probably need to check with your Basis guys for this...
Hope this helps.
Luis

How do I disable the "some plugins are out of date" message

I am running firefox 3.6.3 on a powerpc mac laptop. There are no more upgrades to either firefox or any of the plugins it is using. It's a powerpc and the current updates of the plugins all require an intel based mac. I constantly get the message "some plugins used by this page are out of date" message above the screen, or Firefox disables plugins because it says they are a security risk. I don't care. This is an old computer that would work fine if Firefox would just stop trying to upgrade either itself or its plugins, or try to warn me about something that can't be upgraded and that I don't care about. MAC rule number one: The user is in charge. How do I fix this annoying and PC like feature?
In the future if Firefox is going to continue to have this "feature" it should keep track of what kind of computer it is running on and what what updates can and can not run on the computer it is running on, or give the user the option of turning off not only the messages but the whole plugin update function.
Mac OX 10.5.8 running on a 1.5 GHZ Power PC G4

Quote: ''I'm not sure what you mean Address bar > Plugins ''
What is meant in to open the "Tools > Add-ons > Plugins" window (the about:addons page doesn't exist in Firefox 3.6.x)
You can inspect and modify some prefs on the about:config page to suppress the plugin reminder.
*set the plugins.hide_infobar_for_missing_plugin pref to true
*set the plugins.hide_infobar_for_outdated_plugin pref to true
*http://kb.mozillazine.org/about:config

Tables for Credit data

Hi all,
please tell me the tables for Credit data.
Thanks,
kishore.

1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
hope it helps

Credit data inconsistency

Dear Experts !
Please help me in the below credit management scenario.
User observed some inconsistent data in transaction -VKM1 with respect to the FD33 screen . I checked the data in RVKRED88 report and found that open order value of the sales order-XXX was much lesser than the credit value of the same sales order in VKM1 transaction.
Could you please tell me whether the open order value in the report RVKRED88 is correct or that shows in VKM1 is correct and how to rectify this data inconsistency.
Thanks in advance !
Sandeep

Dear Sandeep,
There are two programmes to correct the Credit data inconsistency
First use the Program RVKRED77. the you can use the second Program RVKRED88. in SE38 transaction enter the programme then click on execute or press F8
There system will ask you to maintain the selecction criteria.
RVKRED77
Credit account
Credit control area
RVKRED88
Credit account
Credit control area
Document number
Best Regards,
Mh

Credit data in Biller direct

Hi All,
I am working on UCES Biller direct portal in which we have a CREDIT tab .
Firstly,I want to know that is it referring to the credit data or the creditworthiness.(I suppose its credit data).
Secondly, If it is credit , where can i actually see this credit data as it is not refecting in my portal. Even though i can see all other data related to payments through FPL9 and on the portal as well except this on portal.
Is it something else that is missing from my side for the credit data to be seen on the portal?
Please suggest.
Regards,
Richa Tyagi

Hi still you are looking for answer? let me know

Recreation of Credit Data puts Delivery notes on hold

Hi All,
We run the standard SAP report RFDKLI20 any time we change a credit limit on a customer. This updates the backlog with the new Credit limit. It also updates the delivery notes which had already been approved to ship and are in process at the warehouse (eg: not yet goods issued). This program places the delivery notes back on referral to release again.
The requirement is that the backlog update should not have any affect on existing /created delivery notes that have not yet been goods issued and shipped. Please provide me some pointers on how to achieve this.
Regards,
Praveen

hi
report which you have specified is f.28 transaction and while using this system recreates the credit data irrespective of open /approved/released /status of sales order/open delivery /open picked delivery/ docs.
so if you want system not run thru all open del/open picked del docs,which are already released from credit check ,then for those credit controll area u should not assign the credit check rule B and C ,so that when u run the below report system doesnot behave like what u have mentioned.
reward if helps !!!!!!

UPDATION OF CUSTOMER CREDIT DATA IN CONTRACT

Hi all
We have a scenario where the payer is changed in the Sold to party and we can see the change done in contract(payer).
But we observe that the Customer credit data does not change.It is still picking the old payer's
credit data!
Any one could help us in resolving this issue.
Regards
Srikanth

Dear Freind,
You have Changed the credit Data in FD32 or the Payer in Customer Master . for This I believe you need to Carry out Reorganization of FI & SD credit Data .
Please run the report : F.28 and recreate the Credit Data .
Hope your Problem Will be solved.
regards,
A S

How to find credit data exchange rate at the billing document

Hi Gurus,
I have a question about Creidt data exchange rate, I created sales order and when I tried to generate the invoice, it was split into 2 billing document and the reason in split analysis is "Credit data exchange rate at billing document", I want to ask where can I find the credit data exchange rate at the billing document?
And where can I find that this is one of the criteria to trigger the billing split?
Thanks for your great help in advance.
Edited by: Lakshmipathi on May 25, 2011 8:57 PM
Please dont post the same question in multiple forums which is not allowed

Hello, this field is for the exchange rate between local currency & local currency 2, there must be someplace to set up it, do you know where is that place?
As now the invoice split show the data with the exchange rate which is weird. And i don't know how to fix it so that the invoice will not be split anymore..
Thanks for your great help!

I'm seeking suggestions to create a data message playback system

I am working with a data message table and want to playback the data with timed, FFw, Rev or pause functions.
Details:
Table contains different messages like rows in a spreadsheet.
Each message row is sent one at a time and is comprised of binary hex data that must be decoded and displayed on the screen.
I'd like to use event structures to step through the data and view the decoded messages.
Does anyone have example vi's that may solve my problem or provide direction?

Hi jdam,
Thank you for posting in our forums. LabVIEW is a very powerful and versatile tool that should be able to accomplish some of your tasks. First, I just want to clarify some things about your issue. With this data message playback, is there a specific file format that you were looking to use? Or were you just looking to display the results back on the screen? If your data is stored in a spreadsheet file, then I'm assuming you have some sort of two-dimensional array of data. You can use some of the array functions, such as Index Array, to pull out each row on each iteration of a while loop and act on that data. This action can include performing a conversion from the binary hex data into whatever specific format you are trying to use. We have functions like the typecast function and other format conversion functions in the String/Conversion Palette of VI's that can help accomplish this task.
You should be able to use a simple user interface that has a button for each playback action. Each of these buttons can be tied to a specific event in an event structure. Using the appropriate converted data format, you can have each of these events perform whatever actions or display with your data depending on the button that is pressed. Was this the type of functionality that you were looking for? If you wouldn't mind elaborating a little bit more on your steps, I would be able to give you more detail to push you along a more specific path. I hope that I'm understanding you correctly. Take care and have a great day!
Regards,
Matt G.
Applications Engineer
National Instruments

Credit data Message no. V1677

Similar Messages

Maybe you are looking for