Credit Mgt - VKM4 not Updating sales orders
Hi all,
We have issue in credit management, we are using Dynamic Credit Management at sales order Level, once sales order is block for over credit we will release through VKM3 or VKM4 ,
But Problem system is behaving differently with some credit account for example
We created sales order and it got block for credit and its got release through VKM3, but when are reviewing that order in VKM4
using Overall credit status as D , this problem is happing for only few credit account but also not frequently, i mean to say some time its updating VKM4 after release.
Can any one guide me what could be a issue
Regards
Nishad
SAP Note 396791
SAP Note 394392
SAP Note 381685
SAP Note 396338
SAP Note 18613
SAP Note 124571
SAP Note 716141
SAP Note 377165
Please check these notes
Hope this helps
Regards
Sai
Similar Messages
-
XVBAP has the new line item but does not update Sales Order
Hi
I need to update the sales order with a new line item when the line item has a base unit of measure as the sales unit. I need to then convert the base unit to sales unit with a whole figure and the rest can be in the base unit.
I am able to see the update in the xvbap but the line item doesn't get updated.
I am puting this code in a perform within
MV45AFZB within Form USEREXIT_CHECK_VBAP
But I guess I am doing something wrong can someone please take a look at it and tell me what is wrong with the coding.
*& Include ZSD_CREATE_NEW_LINE_ITEM *
*& Form create_new_line_item
text
--> p1 text
<-- p2 text
FORM CREATE_NEW_LINE_ITEM .
CONSTANTS: C_MEINH LIKE MARM-MEINH VALUE 'CSE'.
Variables Used
DATA: WS_WMENG LIKE VBEP-WMENG.
DATA: INPUT LIKE VBAP-KWMENG,
WS_EA LIKE VBAP-KWMENG,
WS_CSE LIKE VBAP-KWMENG.
DATA: WS_MVKE_VRKME LIKE MVKE-VRKME.
Internal Tables and Structures
DATA: WS_XVBAP LIKE XVBAP.
DATA:
it_vbap LIKE vbap OCCURS 0 WITH HEADER LINE,
it_vbep LIKE vbep OCCURS 0 WITH HEADER LINE,
it_xvbap LIKE vbapvb OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF WS_MARM,
MEINH LIKE MARM-MEINH,
UMREZ LIKE MARM-UMREZ,
UMREN LIKE MARM-UMREN,
END OF WS_MARM.
CLEAR WS_MVKE_VRKME.
SELECT SINGLE VRKME INTO WS_MVKE_VRKME
FROM MVKE
WHERE MATNR EQ XVBAP-MATNR
AND VKORG EQ XVBAK-VKORG
AND VTWEG EQ XVBAK-VTWEG.
IF VBAP-VRKME <> WS_MVKE_VRKME.
LOOP AT XVBAP.
SELECT SINGLE MEINH UMREZ UMREN
FROM MARM
INTO WS_MARM
WHERE MATNR = VBAP-MATNR
AND MEINH = WS_MVKE_VRKME.
IF XVBAP-MEINS <> WS_MVKE_VRKME.
IF NOT XVBAP-KWMENG = 0.
WS_WMENG = XVBAP-KWMENG / WS_MARM-UMREZ.
IF WS_WMENG > 1.
This means that the line item needs to be split into CSE & EA
INPUT = XVBAP-KWMENG.
WS_EA = INPUT / WS_MARM-UMREZ.
WS_CSE = WS_EA.
WS_EA = WS_CSE * WS_MARM-UMREZ.
WS_EA = INPUT - WS_EA.
Now we have the qty. split into EA & CSE. Now to
assign it to xvbap
XVBAP-KWMENG = WS_EA.
XVBAP-VRKME = WS_MVKE_VRKME.
READ TABLE XVBAP WITH KEY POSNR = XVBAP-POSNR.
MODIFY XVBAP INDEX SY-TABIX.
WS_XVBAP = XVBAP.
WS_XVBAP-KWMENG = WS_CSE.
MOVE-CORRESPONDING WS_XVBAP TO XVBAP.
INSERT XVBAP INDEX SY-TABIX.
ENDIF.
ENDIF.
ENDIF.
ENDIF. " IF xvbap-vrkme 'EA'.
ENDFORM. " create_new_line_itemHi Clark,
Pls check the Include MV45AFZZ instead of the one which you are using . Here in this include MV45AFZZ you can have access to the Header and Line items data .
Here in this include
FORM USEREXIT_SAVE_DOCUMENT *
This userexit can be used to save data in additional tables *
when a document is saved. *
If field T180-TRTYP contents 'H', the document will be *
created, else it will be changed. *
This form is called at from form BELEG_SICHERN, before COMMIT *
form userexit_save_document.
Endform.
Either you can write the code you want to update the XVABP table here or you can use the form .
FORM USEREXIT_MOVE_FIELD_TO_VBAP *
This userexit can be used to move some fields into the sales *
dokument item workaerea VBAP *
SVBAP-TABIX = 0: Create item *
SVBAP-TABIX > 0: Change item *
This form is called at the end of form VBAP_FUELLEN. *
form userexit_move_field_to_vbap.
endform.
This are the 2 performs in this include where you can do you code and it will defnitely solve your problem.
Good Luck to you . Let me know if your problem get solved.
Thanks & Regards,
Naidu. -
Credit Check for "Not Relevant" sales order items
Hello All,
I am having a situation where my client takes advance reservations almost an year in advance.
The sales order items have schedule line category to not consume inventory and so the overall status on each line item is "not relevant". The credit status on the order is "not performed". Since the overall status is "not relevant", the sales order amount is not added to the credit master receivables.
We have around 100K orders and I am trying to see if there is a good solution to do a credit check on all these orders.
I am in a desperate situation and would really appreciate a quick response.
Thanks very much for your help.
AMHi Shiva Ram,
Thanks very much for your reply.
When I change the schedule line category on the items, the overall status on the line item changes to "Open". The credit status of the order will be "not performed".
If I were to create an advance order with items consuming inventory, it goes through a credit check with the existing configuration.
AM -
BAPI_OUTB_DELIVERY_CHANGE not updating sales orders quantitys
Hi,
When using BAPI_OUTB_DELIVERY_CHANGE to do batch split and modify the delivery quantities its fine but the sales orders is not being update to free items.
Any ideas?
thanks
JaimeHello Brad,
if the sales order in item 10 has 10 units the subsequence delivery is made with 10 units but thy only pick 5, the delivery is adjusted to get 5 unit and 5 picked the other 5 "return" to the sales order to be free to make another delivery.
Regards
Jaime -
Update sales order through workflow
Hi,
i developed one workflow for sales order. after all aprovals the sales order is updating upto 2nd change. but 3rd change is not updating sales order.
For updating sales order i am using BAPI_SALES ORDER_CHANGE function module.
Thanks.Hi Abdullah Azzouni
my scenario is when sales order is created or changed my workflow should trigger and make sales order as incomplete with (Z field) by using incompletion Procedure.
Also some other custom fields there for other workflows in salesorder.
In METHOD
select single zfield1
zfield2
zfield3
Zfield4 <- for my workflow
INTO wa_ext_hdr
FROM vbak
WHERE vbeln = object-key-salesdocument.
wa_ext_hdr-zfield ='X'.
wa_ext_hdrx = 'XXXX'.
MOVE 'U' TO wa_headerx-updateflag.
MOVE: BAPE_VBAK TO wa_extflds-structure.
CONCATENATE object-key-salesdocument
wa_ext_hdr INTO
wa_extflds-valuepart1.
APPEND wa_extflds TO i_extflds.
MOVE: BAPE_VBAKX TO wa_extflds-structure.
CONCATENATE object-key-salesdocument
wa_ext_hdrx INTO
wa_extflds-valuepart1.
APPEND wa_extflds TO i_extflds.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = object-key-salesdocument
order_header_in = wa_header
order_header_inx = wa_headerx
behave_when_error = 'P'
TABLES
return = i_return
extensionin = i_extflds.
READ TABLE i_return INTO wa_return WITH KEY type = 'E'.
iF sy-subrc EQ 0.
ELSE.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
Can you help on this.
Please suggest me where i am wrong or if you know any other way to achieve this functionality guide me.
Thanks in Advance.
Raj -
Sales Order Credit Account and Credit control area not updated
Hi,
I have a production issue. I have two sales orders created from Same Value contract, with same PO, same sold to party same payer. Both the orders created by same user at the same time.
First SO has credit control area and credit account is updated but the second order did not update with this information.
For first order, if I go to Environment -> Partner -> Display credit account, system taking to FD33 screen of the credit account.
For the second order, above menu path giving message "Cannot display credit limit as no credit management account is available"
Please let me know how fix the second order to rectify this issue.
Thanks,
SatishHi,
Goto OVAK T.Code.
Assign credit check to your second sales order type.
Assign the values from "A" to "D".Any value as per your need.
Save.
Regards,
Krishna. -
Credit Card number entered CRM sales order is not appearing in R3 Sales ord
Hi,
We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
Appreciate your help on this.
Regards
Mohammed RoshanHi All,
Looking forward to your valuable inputs on this as to how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
Regards
Mohammed Roshan -
Approval procedure when update sales order that hasn't been approved
Dear Experts
I need some advice
Example:
- BP credit limit = 100
- Create New Sales order with amount 90, doesnu2019t need trigger approval procedure, because the amount is still under limit
- Update the SO amount to be 110, approval procedure should be triggered
But in SBO, approval procedure is not triggered for update transaction even for SO has not yet been approved, is it a bug? Will it be improved in SBO 8.8?
Is there any other way to trigger approval procedure in update mode? May be through store procedure or add on?
Really appreciate your help
Best Regards
JeiMingDear Gordon
I understand the concept for approval will not be triggered anymore for approved SO, because once a transaction has been approved, user will not be allowed to make any changes that related with the approval. And SBO has been made restriction for that. It is good
But, It doesn't make sense, for SO that even the approval has not been yet executed. And SBO still allow user to make any changes such as quantity and total amount. And SBO do not trigger the approval if the modification meet approval condition
If SBO was designed not trigger approval in update mode to avoid endless loop as what you said, why SBO still allow user to make any changes in unapproved SO ? it makes user can avoid the approval
Don't you think this is a bug ?
Please advice
Best Regards
JeiMing -
Update Sale Order Header Text through Enhancement
Hi Experts,
I Have a requirement to update the sale order Header Text , when the sale order is opened in VA02 and saved.
Here in I tried using edit_text, it updates sale order header text directly in DB during run time even before the save action is completed.
But I need to just fill the header text and that has to be saved during the save action only.
I tried coding the same in the user exit (userexit_save_document) but this user exit gets triggered only when there is some changes made to the document when opened in VA02 & Saved.
Is there any user exist to pass sale Order Header text and save when save button is clicked irrespective of the document been changed or not.
Thanks in advance
SathishHi Brad Bohn,
My actual requirement is to trigger an Idoc when the user goes to VA02 transaction and clicks save.
IDoc gets triggered only when there is some changes to that document, that is through NAST table entry based on the output configurations in NACE transaction.
Now that the user wants to trigger an IDoc even if there is no change (ie. to reprocess the IDoc) when he just opens a sale order in VA02 and click save.
It is not possible to trigger an IDoc through configurations when there is no actual change in VA02 and saved.
So it has to be forcefully sent by making some additions to the Order through coding, so I choose that Text box to fill some additional data and save .
Kindly Let me Know any thing could be done for this scenario.
Thanks in advance
Sathish -
How to update sales orders using B1WS in SAP 8.8 PL18
Hello all.
We are having a problem updating sales orders using Sap Business One Web Service ( B1WS ).
We are running SBO 8.8 PL18, MS-SQL 2008, and all is fine when using the SBO client.
But when it comes to updating sales orders through B1WS we just cannot get it to work.
We can add new orders easily without problems. Updating orders always gives this error:
\[ORDR.PayDuMonth\]\[line: 0\] , 'Field cannot be updated (ODBC -1029)'
We have checked and verified multiple times that our setup is correct.
Also the WDSL files are verified.
We can update orders just fine using the sboclient.
And using B1WS we can basically do everything, besides updating.
We have also tried this on different company db's, so we are quite sure this is not
something related to some general setting we missed, but who knows?
We have tried different ways to "assemble" the order before updating, but it always
ends with the above error.
Here is an example of one of the tests, where we load an order by docentry,
increment the quantity of all open lines by '1', and then try to update it.
protected void Page_Load(object sender, EventArgs e)
// First we login
string sessionId = "";
LoginService.LoginService l_login = new LoginService.LoginService();
LoginService.LoginDatabaseType l_dbtype = LoginService.LoginDatabaseType.dst_MSSQL2008;
LoginService.LoginLanguage _lang = LoginService.LoginLanguage.ln_English;
string _server = "SAP-8_8PL18";
string _licserver = "SAP-8_8PL18:30000";
string _db = "my_test_company";
string _user = "manager";
string _pass = "********";
try
sessionId = l_login.Login(_server, _db, l_dbtype, true, _user, _pass,
_lang, true, _licserver);
catch (Exception ex)
Response.Clear();
Response.Write(ex.Message);
Response.End();
if (sessionId == "")
Response.Clear();
Response.Write("No sessionId");
Response.End();
// We are logged in and have a sessionId
// Now load a valid open order by docentry
try
OrdersServiceRef.OrdersService orderService = new OrdersServiceRef.OrdersService();
orderService.MsgHeaderValue = new OrdersServiceRef.MsgHeader();
orderService.MsgHeaderValue.SessionID = sessionId;
orderService.MsgHeaderValue.ServiceName = OrdersServiceRef.MsgHeaderServiceName.OrdersService;
orderService.MsgHeaderValue.ServiceNameSpecified = true;
OrdersServiceRef.DocumentParams docParams = new OrdersServiceRef.DocumentParams();
docParams.DocEntry = 31; // Docentry of a known open order
docParams.DocEntrySpecified = true;
OrdersServiceRef.Document order = orderService.GetByParams(docParams);
OrdersServiceRef.DocumentDocumentLine line = null;
for (int i = 0; i < order.DocumentLines.Length; i++)
line = order.DocumentLines<i>;
if (line.LineStatus == OrdersServiceRef.DocumentDocumentLineLineStatus.bost_Open)
line.Quantity += 1;
orderService.Update(order);
catch (System.Web.Services.Protocols.SoapException ex)
Response.Clear();
Response.Write(ex.Message);
Response.End();
catch (Exception ex)
Response.Clear();
Response.Write(ex.Message);
Response.End();
Response.Clear();
Response.Write("All OK");
Response.End();
I hope that someone has an idea as to why this happens.
The customer often changes quantity or adds lines on their orders,
and the only way to solve it so far has been to make a new order and
close the old one.
Thanks in advance
J. ThomsenHi,
Welcome you post on the forum.
Have you checked if you only update a specific line instead of a loop?
Thanks,
Gordon -
Error while updating Sales Order : Another user Modified Table (RDR1 )
Hi All,
I am getting an error message while running the following steps.
Steps
1) Pull an entry from sales order.
2) Add new data to line.
3) Update the sales order.
a) Sap updated the data.
b) Through code using DI API we updated some UDF.
4) With out closing / Pressing OK button
5) We added new data to line.
6) Then Press update.
An Error will through by B1 as Another user modified the table(RDR1 ). Before going to the code where we are handling the update of UDF.
But after the 3rd step above when we do
4) Close the window or pressed ok
5) take the sales order window again pull the data
6) Add new Data to line.
7) Update sales order then it will go smoothly.(Updating by B1 and from code )
Can anybody tell me why this happens?And any workarounds to solve this?
Deepeshare u adding a matrix row thru the code? I get this error when I am adding rows and I get the rownumber out of sync.
if so get the max (lineid) from rdr1 and then check against the matrix.rowcount before adding a row. if lineid is greater that matrix.rowcount take lineid + 1 and assign it to the matrix.row, else take the rowcount + 1
if not, and as a workaround, then you can try using the SBO_SP_transactionnotification stored procedure. -
Credit Check while creation of Sales Order for Item Category Purchase Req
Hi Experts,
We are creating Sales Order using an Order Type ABCD for a material 1000. While creating Sales Order, we use Item categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO).
Credit Check settings are there at Order Type ABCD as well as all the Item Categories (ZOVD, ZOVB,ZOST,ZOVP and ZOBO). We are trying to test a scenario where a customer does not have enough credit limit while creating a sales order.
When we create a sales order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP), credit check fails because our customer does not have enough credit limit, so that Sales Order gets created and Delivery does not get created (This is what we want), then we go into VKM1 manually and relase the sales order and then if we go to VA02 and check the status of the Sales Order, it says sales order status is complete. My Sales Team is saying here also Purchase Requisition is getting created.
When we create a sales order for Item category ZOBO, it is going into Purchase Requisition screen. Once we give another plant in the create purchase requisition screen and save it we are getting a message that cannot create Purchase Requisiton because of Credit Block.
The settings were same for all the Item categories.
1) What made difference to complete Purchase Requisition for Item Categories (ZOVD, ZOVB,ZOST,ZOVP) and not for Item Category ZOBO when my customer is not having enough credit Limit.
2) Why Purchase Requisition screen is not coming for us when we create an Sales Order for Item Categories (ZOVD, ZOVB,ZOST,ZOVP). We only get Create Purchase Requisiton Screen for Item Category ZOBO.
Thanks
RajanikanthHi,
None of the Item Categories has Create PO Automatically.
Thanks
Rajanikanth -
Credit/Debit Memo/Note assign to order
Hi all,
Lets imagine the following.
I've made a normal sales order to sell some material. After this, the order is delivered and billed.
A week later I've received a complaint and part of the material is sent back.
In here I believe that a credit memo (sales order) is the logical thing to do, so I do it, but in fact, how can I say that this credit memo (that is a sales order of other type) is assigned to the first sales order (the delived one)?
Is it possible to have a relation between orders?
Thanks!
Pedro TaveiraHi,
Here there are two case.One is either to go for the returns process or either to go with the credit memo process.
For this one initially we have to create the credit memo request(Sales order) which is going to be created either with reference to the invoice created above or with the sales order.
For this if you want to create with reference to invoice then you have to maintain the copycontrol between the order and invoice by using the T.Code "VTAF".
If you want to create with reference to the order maintain the copycontrol between initial order and creditmemo request by using the T.Code "VTAA".
Save your entry.
Try to create with reference to the order.
Then creditmemo request will be created and blocked.An authorised person has to release this.
Then create the credit memo by using the T.Code "VF01" with reference to taht creditmemo request.
Regards,
Krishna.
Note:Search in the forum for more details. -
Credit Exposure have not updated after SO creation
Hi Expert,
As per business requirement, we want to maintained credit check during consignment process. Here we have unable to stop Consignment Fill-up order with excess credit limit.
EX: In FD32, Customer Credit Limit: 100000
If we create first Consignment Fill-up order with amount 90000 and create second order with amount 15000 than system is allowing to create SO and in FD32, Credit exposure amount not updated in both cases.
I have also active credit limit with item category. Please find the our current setting in VOV8 and OVA8.
Please suggest how can we configure this process.
Thanks in advance.
Regards,
Shatrughan SinghEven though you activated the credit active to KBN still system will not update those values to FD32.
This is standard behavior of SAP R/3 system, please see the note SAP 492831 which clearly says credit management for consignment works for consignment issue.Not in Consignment fill up.
I am assuming that the reason could be the consignment fill up does not update the open order values to FD32 is
Since the consignment fill up is just dumping the stock at customer location, let us assume if the goods are not sold by the customer to end customer then again we need to get those items back to our ware house so here there is no point of updating the credit values to customer in to FD32
And it is not relevant for billing hence there is no point of talking about credit block
thanks,
Srinu. -
Error message when updating Sales Orders
Hi Experts
Following an issue over the weekend when I was forced to perform a hard reset we are now experiencing error message when trying to update some sales orders.
This entry already exists in the following tables " ADO1 (ODBC - 2035) [Message 131 - 183]
it is not happening on all orders - i think only ones which were on the system prior to the reset.
We also use webtools and the B1SyncService seems to be causing the SAP B1 system to become unusable - following each attempt to sync there is an error in the event log:
Event Type: Error
Event Source: B1SynchService
Event Category: None
Event ID: 0
Date: 29/06/2009
Time: 13:42:38
User: N/A
Computer: SQL01
Description:
A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
at netpoint.api.data.DataFunctions.ExecuteScalar(String SQL, String connectionstring)
at NetPoint.SynchSBO.SBOObjects.SBOUtility.SetCompany(Company TheCompany, SecurityTicket securityTicket)
at NetPoint.SynchSBO.Synch.SetCompany()
at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket)
at NetPoint.SynchSBO.Synch..ctor(SecurityTicket ticket, Int32 pricinginterval)
at NetPoint.SynchService.NPSynchService.Synch(String profile, Mutex mutex)
at NetPoint.SynchService.NPSynchService.Main(String[] args)
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
For now I have had to stop the SyncService to prevent B1 from becoming unusable (users are unable to start any AR module), but even after I have stopped the syncservice I still have the error when updating sales orders.
Regards
JonDear Johnny,
the error reported sounds like a DB Corruption. I would advise you to log a message to SAP Support including all the details in order to obtain the error message. It is also a good idea and it will speed up the process if you include some print screens showing exactly the error message.
Hope my reply helps you to solve the issue.
Regards,
Wesley Honorato
Maybe you are looking for
-
Viewing/Manipulating ABR Files in Bridge
One of the most frustrating things about working in Photoshop is the inability to preview an ABR file and select ONLY specific brushes out of a set, instead of loading the whole expansive set. Being able to view ABR files and pick and choose particul
-
How can I tell if someone else is tapped into iPhone 4s when I use as hotspot?
I see a message saying there are 2 connections on my iPhone while in hotspot use. It seems I remember being able to pull up ip address to check that noone else is hijacked on it. Can you tell me how to do that? Is that the best way to watch that?
-
Handling Unit not being assigned to TO for an outbound delivery
Hi All When I create a TO for an outbound delivery then a handling unit is not being assigned to the TO. I cannot confirm the TO as it complains about the non assignment of HU. I have done the following so far: 1. Set up a default packing material w.
-
-
can anyone help, is there anyway you can get a portable router for a 16gb ipad air