Credit Exposure have not updated after SO creation

Hi Expert,
As per business requirement, we want to maintained credit check during consignment process. Here we have unable to stop Consignment Fill-up order with excess credit limit.
EX: In FD32, Customer Credit Limit: 100000
If we create first Consignment Fill-up order with amount 90000 and create second order with amount 15000 than system is allowing to create SO and in FD32, Credit exposure amount not updated in both cases.
I have also active credit limit with item category. Please find the our current setting in VOV8 and OVA8.
Please suggest how can we configure this process.
Thanks in advance.
Regards,
Shatrughan Singh

Even though you activated the credit active to KBN still system will not update those values to FD32.
This is standard behavior of SAP R/3 system, please see the note SAP 492831 which clearly says credit management for consignment works for consignment issue.Not in Consignment fill up.
I am assuming that the reason could be the consignment fill up does not update the open order values to FD32 is
Since the consignment fill up is just dumping the stock at customer location, let us assume if the goods are  not sold by the customer to end customer then again we need to get those items back to our ware house so here there is no point of updating the credit values to customer in to FD32
And it is not relevant for billing hence there is no point of talking about credit block
thanks,
Srinu.

Similar Messages

  • Commitment is not updated after PO creation !

    After creation of a PO referenced to a PR created from MD51 on a WBS, the commitment in "S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned " is not updated although i believe that all configs are done. any one faced this prob.?

    There is this note (47992 - No commitment is displayed in reporting) which explains when Commitments would not be generated. Please check if you case belongs to any of these:
    1. For purchase orders/ purchase requisitions for project stock or customer stock with settlement on the project or sales order, no commitment is written in the standard program in general. If you want a commitment being written in these cases as well, apply the corrections from Note 498907
    2. If a purchase requisition which is assigned to a WBS element is generated from material requirements planning (MRP), no commitment is generated for the WBS element.
    Note also explains how updation of commitment values is controlled:
    1. In the year-dependent controlling area control parameters, commitments management must be active (Transaction OKKP).
    2. In addition, the G/L account to which the purchase order is assigned, must be created as a cost element at the delivery date.
    Regeneration of the commitment afterwards is possible by changing the purchasing document (for example, the item text).
    Regards
    Sreenivas

  • I have a problem with the iPhoto not updating after the hard drive recall.

    The iPhoto with not update after doing the Hard Drive Recall. It keeps saying I don't have the right ID. I have tried resetting all my passwords and no change. What do I need to do to fix this problem?

    Which OS version did you have when you acquired iPhoto and was it on a DVD (iLife) or did you download it from the app store initially?
    And, last question, did you skip Mavericks? Mavericks owners were given the opportunity to update iPhoto to an app store version free of charge; if you skipped it and do not have a backup or the installer DVD or purchased a new computer recently, then you'll need to purchase it.

  • PO item change is not updated after Delivery completion

    Dear All,
    PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
    Regards
    Sujith

    Hi Dev,
    After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
    Rgs
    Sujith

  • HT1338 ok so i know that my computer needs to be updated but I do the software update and it say there are no current updates I have not updated my computer in a long time

    ok so I have not updated my computer in a long time and I go to the apple icon in the upper left hand corner of my computer and click on it and then click on softwear updates and it runs and says there are no updates.

    You have to buy the next OS X version. Free updates are only available for the version you have. Since you're posting here, assume you want to upgrade to at least OS X 10.6? Or further?
    Call the Apple online store, which in the US is at 800-MY-APPLE, or you can also order online from them too. OS X 10.6 is only available on DVD, not download. Get it, install, do Software Updates until no more are available. Done. You probably already have at least 1GB of memory, and some spare disk space to install it. Of course, backup first.
    If you want to upgrade to OS X 10.8, see these requirements to see if your system is able to. Note the minimum memory is 2GB, however, 4GB is recommended.  Assuming your system can run Mountain Lion, you can upgrade directly from OS X 10.6 to OS X 10.8. You don't need to upgrade to OS X 10.7 as an interim step. OS X 10.8 is downloadable from the App store.
    If you want to upgrade to OS X 10.7, after you upgrade to OS X 10.6, call the online Apple store again to purchase a download code, then download from the App store.

  • Node.length not updating after removeInstance

    I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
    For example, the form starts with 1 line item. (node.length = 2, index = 0)
    I can successfully add a new line item (node.length = 3, index = 1)
    I then can add another line item (node.length = 4, index = 2)
    I can successfully delete the last line item (index = 2) using the following code:
    var nodelength = form1.items.nodes.length;
    //need to know which instance is being removed
    if(nodelength>2){
    items.item.instanceManager.removeInstance(nodelength-2);
    else if(nodelength==2){
    form1.items.items.Status.rawValue = "";
    form1.items.items.guestName.rawValue = "";
    form1.items.items.Payment.rawValue = "";
    form1.items.items.Entree.rawValue = "";
    At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
    This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

    This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
    Chris
    Adobe Enterprise Developer Support

  • Thumbnails not updating after external editing.

    I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
    I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
    I did try restarting Aperture before the doing the "option - update preview" and that had no effect.

    Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
    I am using 3.0.1 now and that is where I am seeing the issue.

  • Database history growth not updating after EHP upgrade

    Hi All,
    We are using SAP ECC 6.0 (731 - SP09 )  & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check  collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
    Please help me to resolve this issue.
    Regards,
    MK

    Hi MK,
    You can try few things:
    1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
    2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
    Try with Repair all collector.
    To make it work properly you have to perform
    Data Collection Full
    Data Collection Incremental
    Hope it helps
    BR Vaibhav

  • Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

    Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
    this cause to "cant create ActiveX object" error in VB Scripts
    win7 x64, ps cc 2014 x64
    any ideas? thnks

    All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64,  CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
    Windows Registry Editor Version 5.00
    [HKEY_CLASSES_ROOT\Photoshop.Application]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
    @="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
    [HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
    @="Photoshop.Application.80"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
    @="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
    @="Photoshop CS6 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
    @="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
    @="Photoshop CC Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80]
    @="Photoshop Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
    @="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
    @="Photoshop CC 2014 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9]
    @="Photoshop CS2 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
    @="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
    @="Photoshop CS2 Application"
    [HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
    @="{6DECC242-87EF-11cf-86B4-444553540000}"

  • Infostructure S502 not updated after certain date

    There is an infostructure S502. It is not updated after a certain date.
    It should be updated after saving in C011N.
    This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

    I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
    Is it because of some setting in MC23?

  • Average Active Sessions graph not updated after restart

    Hi,
    I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
    I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
    I also tried to clearstate and restart the agent but no change..
    Any idea?
    Thanks

    This is a bug and can be solved by applying
    Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
    This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
    Eric

  • IPhoto 9.5.1 has suddenly got all blank photos.  If I scroll through the photos they appear briefly.  I have not updated to Yosemite.  I have been through the database rebuild and repair routines.

    iPhoto 9.5.1 has suddenly got all blank photos.  If I scroll through the photos they appear briefly and disappear.  I have not updated to Yosemite - I am still running Mavericks on an iMac.  I have been through the database rebuild and repair routines.  I uploaded photos and movies three days ago and all was well.  Then I used the migration assistant to copy from Time Machine to a new Macbook Air and noticed blank photos.  I thought it was a problem with the Macbook Air, but then I went back to the iMac to check and they were all blank as well.

    what does appear after the photo "flashes"?
    Have you repaired permissions? If not backup your iPhoto library and option-command launch and repair permissions - then repair the database and if needed rebuild the database
    If that does not do it down iPhoto Library Manager on the iMac and use the free trial's rebuild command to create a totally new library leaving the existing one alone
    Once you have the iMac working correctly then connect the two systems together (or use an external drive formatted Mac OS extended (journaled) ) and drag the iPhoto library form the iMac to the pictures folder of the MBA (rather than migration assistant)
    LN

  • I have not updated adobe muse (не могу обновить мьюз)

    I have not updated adobe muse, after updating the program is removed and is not installed (after the 43% error)
    у меня не обновился adobe muse, после обновлени программа удалилась и сейчас не устанавливается (после 43% загрузки возникает ошибка)
    Exit Code: 39
    Please see specific errors below for troubleshooting. For example,  ERROR: DW042 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ERROR: Failed CreateAlias
    ERROR: DW042: ARP Entry couldn't be created for language : ru_RU

    ERROR INSTALLATION 39 ADOBE MUSE CC 2014.3

  • Why do Apps not update after installing iOS6?  They just hang there!

    WHy do apps not update after installing iOS6?

    Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
    If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
    They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then?

  • IPad Air Apps will not update after ios8.0.2

    I Now have 17 apps that will not update after I updated my iPad Air to 8.0.2. What gives?  Some apps are stuck in mid update, so i can't use them. My wifi works. I have restored my iPad twice using iTunes. I have plenty of empty storage. I have reset my iPad. I'm out of ideas.

    I have been having the same problem but was able to get around it by updating the apps in iTunes on my Mac then syncing my iPad to iTunes on my Mac. Certainly not an elegant solution but until Apple gets this fixed it is the only way I have found to get updated Apps.
    Tim

Maybe you are looking for