Credit to an asset -Issue

Hi,
We entered an invoice from vendor 158 for $3400. We were later informed that the vendor voided this invoice not payable. They would now owe AZT a credit for this amount. This invoice was posted to asset 4060004. When I tried to credit the amount to the asset it didn't work. What is the correct procedure to enter this as a credit to ACC with reference to that asset?
Kindly help me.It would be a great help if anyone provide some inputs regarding this.
Thanks in advance
Supriya

Hi Supriya
Can you reverse the invoice using transaction code AB08 (reverse asset document)?
Kylie

Similar Messages

  • ABGL Post Credit memo for asset

    Hi,
    In transaction ABGL (Credit Memo in Invoice Year), I wanted to issue credit memo for price difference in acquisition of asset.
    issue background:-
    asset bought without PO (F-90), last year 2010
    Now we want to post Credit memo for this asset.
    Error hit:
    Acquisition value negative in area 01.
    Message no. AA617
    What is this error message mean? How to resolve this?

    Hi,
    in OADB, our setting :-
    Acquisition value = +
    NBV = +
    Investment grants = 0
    Revaluation = 0
    Ordinary depreciat. = *
    Special Depr. = *
    Unplanned Depreciat. = *
    Transfer of reserves = -
    Interest = 0
    Revaluation ord.dep. = 0
    I follow your step, i change acquisition value field to "-", it prompt me this message:-
    Caution: generic values for real depreciation area (refer to long text)
    Message no. AC246
    Diagnosis
    You set up depreciation area 01 so that all types of acquisition values are allowed. However, this only makes sense for derived depreciation areas.
    System Response
    Warning message. The system allows the setting, but note that it can lead to undesired effects for real depreciation areas.
    Procedure
    Check the setting.
    I change theAcquisition value  + to -?

  • Credit check at goods issue and release authorziation based on value

    Hi,
    I am doing credit management config. My reqmt. is to have credit check at goods issue only. Done this through credit group in automatic credit management config. I have used static check with both open orders and open deliveries checked.
    open sales order (delivery not created) value is not updating in the credit exposure field in FD32 can u tell me what can be the problem (I have maintained the subtotal value A in pricing procedure)
    My 2nd requirement is based on the range of credit value, documents should be released. i.e., Credit limit is 1Lakh. Now when it exceeds by 50000, credit manager is authorized to release in VKM5. If it exceeds & between 50000 - 1Lakh, Finance Head should be authorized to release in VKM5 and finally it exceeds above 1Lakh , VP Finance should be authorized to release. How do we handle this, pls. give me solution for the above scenario
    Thanks
    Dhina

    HI
    > I am doing credit management config. My reqmt. is to have credit check at goods issue only. Done this through credit group in automatic credit management config. I have used static check with both open orders and open deliveries checked.
    > open sales order (delivery not created) value is not updating in the credit exposure field in FD32 can u tell me what can be the problem (I have maintained the subtotal value A in pricing procedure)
    Please Check the OSS Note 18613 that gives the check list for credit management setings
    > My 2nd requirement is based on the range of credit value, documents should be released. i.e., Credit limit is 1Lakh. Now when it exceeds by 50000, credit manager is authorized to release in VKM5. If it exceeds & between 50000 - 1Lakh, Finance Head should be authorized to release in VKM5 and finally it exceeds above 1Lakh , VP Finance should be authorized to release. How do we handle this, pls. give me solution for the above scenario
    Please discuss with your ABAP and Basis Consultant.
    Regards,
    Phani Prasad

  • Credit memo for asset with depreciation posted

    HI,
    There is requirement to pass a credit memo for an asset.
    The asset was purchased on 01.04.10.
    And have been depreciated till 31.05.11.
    Now the client want to pass credit memo for the full acquisition value.
    My issue is when I am passing the entry through ABGF - ... in Next Year
    System is throwing error stating the value is going negative.
    Then we passed the write up for the depreciated value as on 01.04.10.
    Still system is giving the same error message.
    Please suggest on what date should I pass the write up to clear the whole posted depreciation and pass the credit memo.

    Hi,
    Go to asset master change, in depreciation are tab double click on depreciation are number  then select negative values allowed check box
    Hope this will help you.
    thanks!

  • Credit memo on asset in closed financial year

    Hi,
    Is there any standard solution for the following case.
    - An Asset was capitalized and also depreciated in the last year. This year was closed in FA already and cannot be nothing posted there.
    - Now I need to credit  this asset and have depreciation recalculated to 0 for both years (current and previous closed one)
    - If I use ABGF (using asset value date 1.1.2008 - first day of current year) it is not possible to credit the whole acquisition amount as there was posted some depreciation in the previous year and NBV would be negative
    How I can credit the whole depreciation amount if part of an asset was depreciated in the closed year?
    How I can recalculate to 0 depreciaton posted in the closed year? Does not matter the correction is posted to the current year.
    Many thanks!
    Jan

    Hi,
    Thanks for your reply.
    That is exactly what I tried. However this will recalculate only depreciation for current open fiscal year. It will not recalculate depreciation for the closed year.
    Is there any other idea how to handle this?
    Thanks!
    Jan

  • Credit Memo Copy From Issue

    I have an issue with 2 specific users on the system,  Both Users are 'Professional" users with Full Authorization to all Modules on the system.
    When the two users go into Credit Memo entry,  enter a Customer then Click the  COPY FROM button,  only 2 Open Invoices are displayed in the Invoice Window for the particular customer.  There are MANY Open Invoices for the Customer.  This is NOT specific for this customer,  BUT All customers behave this way for the 2 users in question.
    ANY OTHER USERS on the system can see All open Invoices when using the Copy from feature.
    We already gave full Authorization to the users.  Turned off Authorizations, and updated and the gave the users Full authorizations and updated.  The users were NOT logged in at the time of the changes to the user's Authorizations.
    There are NO Add ons running for the users in question.
    We also copied  Authorizations from a 'Working" user to the users in question but there are no effect.\
    Is there something OTHER Than authorizations that could cause this problem? 
    Any other ideas or suggestions  would be appreciated!!
    Thanks in advance!!
    Dana

    Have you implemented Data Ownership Authorization?  NO
    What is your B1 version and PL? SAP B1 2007 SP00 PL47
    Again,  it is only effecting 2 users with Full Authorizations and Professional License.
    The Invoices displayed are owned by a different user and other invoices owned the
    the same other user are not displayed.

  • Credit memo and MAP issue

    Hello Guru's
    I have 2 issues, and i am unable to understand the system logic for the same
    Issue 1:-
    We have an Intercomapny scenario
    sequence of transaction is as follows
    1. Create Return purchase order (document type NB) - Intercompany purchase
    2. Post return goods receipts - movement type 161
    3. Post credit memo with respect to return purchase order
    4. Cancel the movement type 161 - using 161 movement type
    System allows me to cancel the document created using 161 movement type
    Step 4 should not be allowed but system is allowing me to do so, please advise how to stop this
    Issue 2:-
    I have a strange MAP issues which is flactuating very drastically
    the scenario is as follows
    Store stock is 10 ea, stock value is 1000, MAP is 100
    DC map is 25
    When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
    Assume we issue 9 quantity from Store then
    Store stock is 9 ea, stock value is (1000-(25*9)) =  775, MAP is 775/1 = 775
    This transaction is causing major flactuation in store MAP (100 changed to 775)
    Please advise if there is any way we can control this behaviour
    I understand that there is a setting which will in case of major MAP changes will put the amount into PRD account.
    Appreciate if you can guide me to help
    Regards
    Amit

    Hi,
    For your first scenario,
    for a retun po of IC NB type, after creating the PO you  need to deliver the same at VL10G. For the delivery system will allow to create the PGR . Prior to these steps you need to return the goods using 161 at MIGO.Please check this 161 stock posted to stock in transit.After PGR system will clear the stock in transit.
    Now after claring the stock from transit try cancelling the MIGO 161 document.
    For the second query,
    Please review your question' When we make return STO from store to DC, ths stocks are issued at DC MAP (condition type P101)
    Assume we issue 9 quantity from Store then
    Store stock is 9 ea, stock value is (1000-(25*9)) = 775, MAP is 775/1 = 775
    This transaction is causing major flactuation in store MAP (100 changed to 775),
    Please review the third line.
    Regards,

  • Excise credit taken of asset

    Hi expert,
    In asset scenario 50%excise duty is paid in current year and 50% in next year and we take credit on that paid excise duty.Now my question is "if i have taken credit of current year and can i take 50% credit (cenvat on hold) in 3rd year instead of next year?
    Any help would be apprecialble and rewarded.
    Regards,
    Nilesh Joshi.

    Hi
    to the best of my knowledge, in asset module you can perform the transaction related with transfer, retirement etc. if you want to create any legal document (specially in india), you have to create the same in SD module. for this u have to create separate pricing procedure with manual input for ED and other taxes. the pricing procedure to be such a way that u have to create sales order and then direct billing. no deliavery.
    Please get in touch with your SD consultnat. still have any doubt, revert.
    regards
    DD

  • Posting a credit to an Asset created by a project i.e Investment measure

    Can anyone help with this.  i am trying to post a credit to an Investment measure using f-02.  I want to create a transaction type that will work but I am not sure what the entries in this transaction type should be.  Any ideas?

    That's exactly what I am trying to do in f-02 with ttype 100 but I get the message, asset is an investment measure, transaction type not allowed.  Am I using the wrong t- code or the wrong transaction type?

  • Asset Issue ?

    Hi
    I have a problem which says likes this at the time of a Down payment request creation:
    Message no. F5378
    The asset number assigned in the purchase document  is different from the asset number entered manually
    cannot be transferred, because the 'Asset number' field was hidden for the account in question
    System Response
    In the first instance a warning appears, drawing your attention to the different account assignments. In the second instance an error message appears, because the asset number must be transferred from the purchase order but the necessary field is hidden.
    Procedure
    If you receive the warning, check which asset number is the correct number for this down payment.
    If you receive an error message, you must either choose another special G/L indicator for down payments so that it is possible to assign an asset number to the relevant general ledger account, or you must change or delete the the specified purchase document number. Only those purchase documents are allowed which are not assigned to assets
    How can I solve this issue ?
    Regards,
    Pankaj.
    Edited by: pankaj_ab on Nov 30, 2009 12:09 PM

    Please either use transaction code F-47 or F-48.  Have you done what the above notes specified?  If not, please try it.  Proceed as follows:
    1.  SM30
    2.  Enter T100S
    3.  Click on Maintain
    4.  Click on Position
    5.  Enter F5 for Area
    6.  Enter 378 for Message
    7.  If message 378 exists, change the standard message class from E to W.
    8.  If message 378 does not exists, click on new entries and make the following settings:
         - Application Area: 5
         - Message: 378
         - Allowed:  EW
         - Standard: W
         - Save.
    9.   Next, enter OBC4 and select your field status variant
    10. Then double-click on Field Status Group
    11. Select field status group: Reconciliation Accounts
    12. Then, click on the magnifying glass " Edit field status"
    13. Double-click on Asset Accounting
    14. Change Asset number/subnumber to optional entry and save.
    15. Next, enter OB41
    16. Double click on Posting Key 39
    17. Click on Maintain Field Status
    18. Double click on Asset Accounting and then check off the radio button opt. entry.  Repeat the same process for posting key 29.
    19. Save
    Go back and try the down-payment request using F-47.
    Elias

  • PR05 Credit card data Buffering issue

    Hello,
    I have an issue with Credit card data. I guess problem is with document buffering.
    Here is the information..
    I am using Tcode PR05 (Travel Expense Manager) for US travel & expenses. TRVPA CCC is set to 4.
    I have selected credit expense data to trip and when I double click on credit expense type for credit card data, I can see the credit card information. Then I replaced it with non credit expense type and checked for credit card data by double click on item. There is no credit card data, which is correct. Later I have replaced it with Old credit expense type, but when I tried to see credit card data, there is no credit card tab & information. I have debugged the entire code, but not found the solution.
    Please help me.
    Thanks

    hi,
    This works as design. Once you replace the credit card receipt to a non-credit card receipt, the first thing will happen it will delete the credit card information. Now if you replace this non-credit card with a old credit card then the information will
    stay the same without the credit card information unless this credit card came from the buffer.
    Regards,
    Raynard

  • Asset Issue to Employee Vendor

    Dear All,
    Scenario to be mapped
    PO is raised against an Asset. GR is done
    and It has to be issued to an Emloyee vendor.
    this has to be shown in inventory in order to issue to a vendor, but it is an asset.
    How this can be mapped in SAP
    Regards.
    Edited by: appu appu on Jul 30, 2009 10:23 AM

    Hi,
    When you  post the Invoice Assign Internal order to the PO and then it will be posted in internal order, then from that internal order you can settle it to the asset.
    Process:
    Create Vendor with employee information
    Create one PO with the internal order
    Releasing to accounting
    Create New Asset
    settle from internal oder to ASSET
    I hope this solution will clear your scenario.
    Regards,
    Venkat

  • Asset issue to vendor for jobwork

    Dear Experts,
    We want to issue an  asset to vendor for some  job work.We will receive the asset after completion of the work.
    We want to charge depreciation for the asset as asset ownership is with us.
    How to do the scenarioa in SAP.
    Thanks and regards
    Poonam

    Hi Rob thanks for your response.  I thought about doing an OSS note however; I would think I would need to get the problem in config corrected first as it contradicts each other.  The problem I am talking about is how they are to return material to vendor....I have never even seen this as a process in my 10 years....
    Process.....when the PO is a return to vendor PO they go to migo and choose the goods receipt and mvmt type 101 and the system will default the 161 in the item level....the two are inconsistent.  If I try to change the top level to a 161 mvmt (as this is what I am used to seeing) it gives the error that the PO is not a stock transport order... Would you agree that I should correct that problem first before creating an OSS note?

  • Asset Issue  - When execute AR01, system throw a error msg .AB064

    Hi   Gurus,
    need guidance to solve the issue.
    When my user run a t-code AR01,   System throw a error "No data was selected - Message no. AB064".
    Then checked through SU53.  It shows that Authorization was successfully given.  Checked with my Basis Consultant also.  He confirmed that the required authorization was given to user.  I  don't know  what the system reacts like this..
    Pl guide me to solve  the issue....
    (  As a consultant, i have all rights / authorization. When i executed AR01, it works perfectly ) .
    tks / Devi Aparna...

    The below are the (xxxx) madatory things before you go and execute the report.
    Company code                      xxxx
    Asset number
    Subnumber
      Asset class
      Business area
      Cost center
      Plant
      Location
      Asset super number
      Worklist
      Report date                     xxxxx
      Depreciation area               xx (Dep area 01, 15, 30, 60, 65)
      Sort Variant                     xxxx
      Translation method
    Try this
    Thanks

  • Asset Issues

    Hi All ,
    Can some one please provide inputs on below two issues.
    1.         We want to change the useful life of an asset (or a number of assets).   The current net book value should then be depreciated over the revised useful life.  We DON'T want any historical adjustments to occur.
    2.         An asset that has been fully depreciated is deemed still to have a value.   We want to write-up the value of the asset and have it depreciated over the revised remaining useful life.
    Best Regards
    Ravi Kumar

    1) use trx. AS02 resp. a BDC-Program to AS02
    2.)you need a program which calculates the value which must be ascribed with trx. ABZU
    A.

Maybe you are looking for