CREMDM Change pointer query

Hi Experts,
I need to send a idoc for message type CREMDM. My requirement is whenever a OA vendor is changed i need to find the main vendor and trigger the idoc for the main vendor. Whenever I make changes in the vendor they are getting stored in BDCP2 table with message type CREMAS. Since its getting stored with message type CREMAS the changes are not read for message type CREMDM.
Is there any different change pointer approach need to be carrried for this message type CREMDM.
Regards
Sridevi S

hi Sridevi,
Try to make all sort of changes to fields were u want change pointers.
Changes will be recorded in CDHDR from there u will get changes that u have made and also object Class
take that object class and look in tcode SCDO double click on text of respective object class u will get the names of table that will be effected by tahe object class .
If u find u r table there goto BD52 with that object class and make entry.
try it out..
revert for further queries..

Similar Messages

Change Pointer Query

hi all,
      i am using HRMD_ABA message type and HRMD_ABA05 IDOC Type to transfer HR data to E-recruiting server..now this does not have segments E1P0022 and E1P0023 so it does not transfer data for infotype 0022 and 0023 to ER. So in the receiving side while processing Inbound data i have one Badi in which i am calling RFC to HR system and get data for IT 0022 and 0023 and Update them in relevent ER data. This is working fine
   But Now i have activate Change pointer data for this HRMD_ABA message type and it doesn't create change pointer if Infotype 0022 and 0023 values have changed the reason is it does not have segments to transfer data as i mentioned earlier.. Is there any way to create change pointer for the this infotype   which are not part of this basic type....
I hope i am clear with my question...
Thanks in Advance...

ya vinod,
   the thing is in my requirement i want change pointer to get triggered if data in IT0022 or IT0023 is changed but since my Idoc and message type does not have field to carry data for these infotypes...i want my change pointer get triggered and Idoc with data of infotype which it can carry of IT0000, IT0001 etc should get generated so that in receiving side my RFC inside Badi will fetched changed data of IT0022 and IT0023.........

Problem while changing the query of the field in Oracle apps 11.5.10

Hello All,
Requirement:
User want to change the query of the LOV attached to Ordered item field on Line items tab on the Sales order form in Order managment
Block name = 'LINE'
Field name = 'ORDERED_ITEM_DSP'
LOV attached to this field in FMB: ITEMS
LOV attached to this field in front end: ENABLE_LIST_LAMP
Problem: Following code is firing at all points (Debug messages are appearing at all points) but Query of the LOV attached to item is still same.
How can in FMB LOV is "ITEMS" and in front end "ENABLE_LIST_LAMP"
My guess is there is some problem with the LOV name which we are passing in the code below. Because LOV name attached to item are different in front end and FMB. There is no LOV in FMB which has “SYSTEM ITEMS Description” kind of structure.
I have written following code in custom.pll (l_chr_rg_query is query taken from the record group attached to “ITEMS” named LOV with some modifications ex: rownum<6 so that it will show only 6 records in LOV if it is really firing our query for LOV)
IF ( form_name = ‘OEXOEORD’
AND block_name = ‘LINE’
AND field_name = ‘ORDERED_ITEM_DSP’
AND event_name = ‘WHEN-NEW-ITEM-INSTANCE’
THEN
MESSAGE (‘message1’);
l_chr_rg_name := ‘XXLION_UNIFORM_CODE_RG’;
l_chr_rg_query :=
‘SELECT item, item_id, item_description, inventory_item_id,item_identifier_type,null item_identifier_type_meaning, ‘
|| ‘inventory_item, address, cust_address, item_definition_level ‘
|| ‘FROM oe_return_items_v ‘
|| ‘WHERE (sold_to_org_id = :parameter.lov_num_param1 OR sold_to_org_id IS NULL)’
|| ‘ and rownum < 6 ORDER BY item’;
MESSAGE (‘message2’);
l_rg_id := FIND_GROUP (l_chr_rg_name);
MESSAGE (‘message3’);
IF ID_NULL (l_rg_id)
THEN
MESSAGE (‘Creating record group here’);
l_rg_id :=
CREATE_GROUP_FROM_QUERY (l_chr_rg_name, l_chr_rg_query);
END IF;
errcode := POPULATE_GROUP (l_rg_id);
MESSAGE (‘ERROCODE is : ‘ || errcode);
L_lov_id := FIND_LOV (‘ITEMS’); --My guess is this LOV name is the source of problem.
MESSAGE ('Error code is4');
SET_LOV_PROPERTY (l_lov_id, group_name, l_rg_id);
MESSAGE ('Error code is5');
SET_ITEM_PROPERTY ('LINE.ORDERED_ITEM_DSP', lov_name, 'ITEMS');
END IF;

I found that there is no problem with code. My problem is not technical, its a functional problem.
It is related to Inventory's "System Items" KFF.
Can anybody tell me, to this "System Items" KFF, one value set is assigned. but it is of none type of value set. so from where the values in LOV are coming?

Change of query already in workbook

Hi,
I have created a workbook for a query and moved to QA. Now the user wants some modifications and I had to change the query. Then I recreated the workbook and saved in the same name. And moved to QA. But the changes that I made to the workbook do not reflect in QA. The workbook reflects the old format only.
Did any of you face the same problem? How do I rectify this?
I look forward to your suggestions.
Thanks
Kumar

Hello Kumar,
The name that u have given for your new workbook is the description; that may be the same for the old and new workbook; but, the technical name is different for both. So, it is obvious that the new workbook can not overwrite the old workbook.
So, may be u can delete the old workbook and advise user to use the new workbook - which is with same description.
-- plz assign points if helpful --
Regards,
Mainak

Portal not picking up changes from query view in analyzer

Hello All,
If I change a query view in analyzer, the changes are not being picked up in the portal unless i restart the portal, therefore clearing the cache. Is there away of clearing the portal cache without a restart? I am aware of a few ways to clear navigation cache and PCD cache, but this does not solve my issue. Also I have cleared the query cache through RSRT but this makes no difference.
Any suggestions apprecaited.
Thanks,
Nick

Hi ,
This is due to the query cache not getting updated for portal
view this problem can be solved by only refreshing the query
and u can get the help of basis people if there are anyother
way for this .
Assigning points is the way of saying thanks in SDN
Regards ,
Subash Balakrishnan

Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

How I can change this query, so I can display the name and scores in one r

How I can change this query, so I can add the ID from the table SPRIDEN
as of now is giving me what I want:
1,543     A05     24     A01     24     BAC     24     BAE     24     A02     20     BAM     20in one line but I would like to add the id and name that are stored in the table SPRIDEN
SELECT sortest_pidm,
       max(decode(rn,1,sortest_tesc_code)) tesc_code1,
       max(decode(rn,1,score)) score1,
       max(decode(rn,2,sortest_tesc_code)) tesc_code2,
       max(decode(rn,2,score)) score2,
       max(decode(rn,3,sortest_tesc_code)) tesc_code3,
       max(decode(rn,3,score)) score3,
       max(decode(rn,4,sortest_tesc_code)) tesc_code4,
       max(decode(rn,4,score)) score4,
       max(decode(rn,5,sortest_tesc_code)) tesc_code5,
       max(decode(rn,5,score)) score5,
       max(decode(rn,6,sortest_tesc_code)) tesc_code6,
       max(decode(rn,6,score)) score6
FROM (select sortest_pidm,
               sortest_tesc_code,
               score,
              row_number() over (partition by sortest_pidm order by score desc) rn
          FROM (select sortest_pidm,
                       sortest_tesc_code,
                       max(sortest_test_score) score
                  from sortest,SPRIDEN
                  where
                  SPRIDEN_pidm =SORTEST_PIDM
                AND   sortest_tesc_code in ('A01','BAE','A02','BAM','A05','BAC')
                 and sortest_pidm is not null
                GROUP BY sortest_pidm, sortest_tesc_code))
                GROUP BY sortest_pidm;


Hi,
That depends on whether spriden_pidm is unique, and on what you want for results.
Whenever you have a problem, post a little sample data (CREATE TABLE and INSERT statements, relevamnt columns only) for all tables, and the results you want from that data.
If you can illustrate your problem using commonly available tables (such as those in the scott or hr schemas) then you don't have to post any sample data; just post the results you want.
Either way, explain how you get those results from that data.
Always say which version of Oracle you're using.
It looks like you're doing something similiar to the following.
Using the emp and dept tables in the scott schema, produce one row of output per department showing the highest salary in each job, for a given set of jobs:
DEPTNO DNAME          LOC           JOB_1   SAL_1 JOB_2   SAL_2 JOB_3   SAL_3
    20 RESEARCH       DALLAS        ANALYST 3000 MANAGER 2975 CLERK    1100
    10 ACCOUNTING     NEW YORK      MANAGER 2450 CLERK    1300
    30 SALES          CHICAGO       MANAGER 2850 CLERK     950On each row, the jobs are listed in order by the highest salary.
This seems to be analagous to what you're doing. The roles played by sortest_pidm, sortest_tesc_code and sortest_test_score in your sortest table are played by deptno, job and sal in the emp table. The roles played by spriden_pidm, id and name in your spriden table are played by deptno, dname and loc in the dept table.
It sounds like you already have something like the query below, that produces the correct output, except that it does not include the dname and loc columns from the dept table.
SELECT    deptno
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
           SELECT    deptno
           ,          job
           ,          max_sal
           ,          ROW_NUMBER () OVER ( PARTITION BY deptno
                                          ORDER BY         max_sal     DESC
                            )         AS rn
           FROM     (
                         SELECT    e.deptno
                   ,           e.job
                   ,           MAX (e.sal)     AS max_sal
                   FROM      scott.emp        e
                   ,           scott.dept   d
                   WHERE     e.deptno        = d.deptno
                   AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                   GROUP BY e.deptno
                   ,           e.job
GROUP BY deptno
;Since dept.deptno is unique, there will only be one dname and one loc for each deptno, so we can change the query by replacing "deptno" with "deptno, dname, loc" throughout the query (except in the join condition, of course):
SELECT    deptno, dname, loc                    -- Changed
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
           SELECT    deptno, dname, loc          -- Changed
           ,          job
           ,          max_sal
           ,          ROW_NUMBER () OVER ( PARTITION BY deptno      -- , dname, loc     -- Changed
                                          ORDER BY         max_sal      DESC
                            )         AS rn
           FROM     (
                         SELECT    e.deptno, d.dname, d.loc                    -- Changed
                   ,           e.job
                   ,           MAX (e.sal)     AS max_sal
                   FROM      scott.emp        e
                   ,           scott.dept   d
                   WHERE     e.deptno        = d.deptno
                   AND           e.job        IN ('ANALYST', 'CLERK', 'MANAGER')
                   GROUP BY e.deptno, d.dname, d.loc                    -- Changed
                   ,           e.job
GROUP BY deptno, dname, loc                    -- Changed
;Actually, you can keep using just deptno in the analytic PARTITION BY clause. It might be a little more efficient to just use deptno, like I did above, but it won't change the results if you use all 3, if there is only 1 danme and 1 loc per deptno.
By the way, you don't need so many sub-queries. You're using the inner sub-query to compute the MAX, and the outer sub-query to compute rn. Analytic functions are computed after aggregate fucntions, so you can do both in the same sub-query like this:
SELECT    deptno, dname, loc
,       MAX (DECODE (rn, 1, job))     AS job_1
,       MAX (DECODE (rn, 1, max_sal))     AS sal_1
,       MAX (DECODE (rn, 2, job))     AS job_2
,       MAX (DECODE (rn, 2, max_sal))     AS sal_2
,       MAX (DECODE (rn, 3, job))     AS job_3
,       MAX (DECODE (rn, 3, max_sal))     AS sal_3
FROM       (
               SELECT    e.deptno, d.dname, d.loc
          ,       e.job
          ,       MAX (e.sal)     AS max_sal
          ,       ROW_NUMBER () OVER ( PARTITION BY e.deptno
                                       ORDER BY       MAX (sal)     DESC
                                      )       AS rn
          FROM      scott.emp    e
          ,       scott.dept   d
          WHERE     e.deptno        = d.deptno
          AND       e.job                IN ('ANALYST', 'CLERK', 'MANAGER')
              GROUP BY e.deptno, d.dname, d.loc
          ,       e.job
GROUP BY deptno, dname, loc
;This will work in Oracle 8.1 and up. In Oracle 11, however, it's better to use the SELECT ... PIVOT feature.

After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

After successful install, all my adobe cc docs, when open, change pointer arrow, i-beam and window elements to oversize. When doc closes all return to normal size. I'm on a PC. Screen res set to medium 1920x1200. Any ideas how to fix?

Ok thanks Linxup I would recommend posting in the respective forums for each of those software titles as opposed to the Creative Cloud Download & Install forum. The relevant forums are as follows:
InDesign - InDesign
Illustrator - Illustrator

Changing the query on a view object

I have a view object right now, based on an entity. It is the default view object, so that means the query in the view object is straight forward, it grabs all of the attributes from the table. And there is no WHERE clause.
In reality I only want to show a finite set of rows from my table. Every time a record is changed/edited in this entity and committed, a new row in the database is created with the same information (I'm using CreateWithParams) except for a few columns.
I actually don't really have update on this table, just creation of new rows. But to the user, I want it to 'look' like they are editing something in the table.
Example:
12, 11:32,Thompson, 60 (the user edits this information in an adf table, and a new row is created in the db)
12, 11:55, Thompson, 75
I have a timestamp (see above) field in the database that is used as part of my primary key, so that I know which record is the latest.
When the VO query is run, I want the user to only see the latest row from the db.
12, 11:55, Thompson, 75
So...
I went to my VO, and I changed the WHERE query to add this:
where t1.TimeStamp = (Select MAX(t2.TimeStamp) FROM rcl.x t2 where t1.uid = t2.uid);
Now, this isn't a mysql/sql question. There's actually a better query that I'd rather run, but the VO editor doesn't allow me to change the query itself....
When I save the new WHERE to my VO, run my page again, I get the expected result (showing me only the latest records).
However, when I try and sort on the table in which my data is displayed, I am now getting ORDER BY errors.
I don't want my VO to be read-only sql based. I want to be able to update my table, so I have my VO running off of the entity.
Why doesn't the VO allow me to change the query itself? (Like do a subquery, instead of having my where clause do the work)
Why are order by errors being thrown when I sort on my adf table after changing the where clause in my view?
Hopefully I wasn't too convoluted in the explanation of my problem..
Thanks in advance,
Joel

HI Joe,
Regarding your problem you can do one of the following tasks:
1- easily to tuning on your view object, I mean in the tuning page of the view you can set that only return 1 record or 2-3 record fetch not all the record.
in the order by you will order by the timestamp field and descending.
2- you can order by the timestamp descending and in the where clause only set the rownum<2 (will return the last record) you can also set rownum<5 and get the 4 last record etc.
3-editing the view query in the expert mode is not advised at all because of many consequences that you will face.
4- maybe it is not bat that you add a readonly view for the table you mentioned and every time you unpdate the entity just re-execute the read-only view.( this method maybe is good maybe is not it depends on your business logic)
Regards.
Edited by: Amir Khanof on Sep 3, 2010 11:11 PM

Suppress Non Changed Fields in change pointer triggered IDOC

I have a requirement to clone message type MATMAS as ZMATMAS. This ZMATMAS is the message type I used to create change pointer triggering outbound idoc for change/create of materials.
When i change a material, all fields are sent instead of the fields only changed(of course key fields should be sent as well). Is there a way via configuration that I can suppress fields which are not changed? Or do i need to clone FM MASTERIDOC_CREATE_SMD_MATMAS and suppress the fields via program
Thanks in Advance!

i'll clarify the requirement again.
Let say i changed a field BRGEW in the material master.
Currently, all the segements which contains BRGEW is sent, but these segements contains other data which are not changed in the material master.
How do i suppress it?
Thanks,

Precautions to be taken while changing the Query read mode in PED system

Dear Experts,
I got a task to change the Query Read mode for more No. of queries in Production system directly itself.
Request you to let me what are the steps to be followed/precautions to be taken while changing the Query Read mode in PED.
one more doubt regarding this.....If i plan to change the Read mode of Query say Q1, how can i come to know weather the Q1 is executing or not executing by that time.
Thanks in advance for valuable response.
Thanks & Regards,
Ramesh - Kumar

Hello,
You can change the query read mode in transaction 'RSRT', here are the steps:
1) Access transaction RSRT and enter the query name
2) Select the 'Properties' option
3) Un-check the 'Info provider' setting next to the 'Read mode' --> This enables you to change the read mode of the query --> Execute
4) Choose the option 'Generate Report' to re-generate the query program
Hope this info helps.
Thanks
Bala

EXCHANGE_RATE with change pointer

Hello Experts,
I saw that there is no option to define the message type EXCHANGE_RATE for change pointer
My question is: how can I get a partial idoc when there is a change in the exchange rate?
Is it possible?
Thank you,
Boaz

Hi Jignesh,
"It is ideal that we dont change the Exchange Rate at the time of POsting Invoice to accounts."
How you have addressed the issue. could you explain.
Thanks & Regards
Sri

Issue with the change pointer for the reduced message type ZMATMAS

Hi All,
I have created reduced message type ZMATMAS for the MATMAS to create a Idoc when change or insert material master data fields( MARA-LAENG, MARA-BREIT, MARA-HOEHE) . My Problem is that the Idoc is generated with the status (03) but the fields(LAENG, BREIT,HOEHE) are not getting fill with the values. They are always filling with the values '/'). I have done the following steps to create idoc for the change pointer. Please check whether i have missed some steps.
1.     Create reduction maintenance ZMATMAS (Tcode BD53)
keep the default selected segments E1MARAM, E1MAKTM
2.     Add following data to maintain table view for the message type ZMATMAS (Tcode BD52)
Object      Table Name     Field Name
MATERIAL       MARA      KEY
MATERIAL     MARA     LAENG
MATERIAL     MARA     BREIT
MATERIAL     MARA     HOEHE
3.     Activate particular change pointer in BD50
Message Type       Active
ZMATMAS         yes
4.     Activate change pointers u2013 Generally (Tcode BD61).
5.     Assign Segment fields to change document fields (Tcode BD66 )
Segment Type     Field Name     Object     Table Name     Field Name
E1MARAM     BREIT     MATERIAL     MARA     BREIT
E1MARAM     HOEHE     MATERIAL     MARA     HOEHE
E1MARAM     LAENG     MATERIAL     MARA     LAENG
6. I have done the distribution model settings (BD64) and the idoc configurations
1.     Logical System
2.     RFC destination
3.     Create port
4.     Create partner profile
7. I changed the fields in material master data(Tcode MM02) and I executed the Tcode BD21.
Idoc is generated but the fields are not getting fill with the values
(Note: some fields are filled with values e. g material number, material description)
I checked the Idoc data segment E1MARAM (WE02)
Fld name   Fld cont.
LAENG       /
BREIT       /
HOEHE      /
Can you please let me know the issue
Prad

Issue is solved when I select the segments and the fields in the segments (Tcode :BD53)
Prad

How to change report query dynamically in Oracle APEX?

Hi,
I want to dynamically change the where condition in APEX report query. Can anyone help me solve my this problem?
(Just want to change the query which we change in Oracle Reports using lexical parameter to change &Where, &Order by etc. dynamically!!)
Thanks, Praful

Hi
I've been using flexible queries in APEX for a few years now, and your question just added a whole new dimension to the flexible and powerful nature or writing reports in APEX.
While APEX Interactive reporting has almost completely removed the need the equivalent of Lexicals in Oracle Reports, I thought it might be fun to try and use lexicals in an APEX report.
Before we start I should summarise the powerful capability of APEX reporting to have oprtional parameters (lots and lots of them if this is needed).
For each parameter, you simply add a page item which will hold the value of the parameter.
The item/parameter can be populated by typing in the value, defining an LOV, using a date-picker etc.
To make the parameter optional simply use an OR in the where clause.
So for a apge item P200_PARAM1.....include
WHERE (:P200_PARAM1 IS NULL
OR COLUMN1 = :P200_PARAM1)
This way you can either leave the page item null or type in / select a value from a LOV.
There is a small quirk in APEX LOV's which sometimes returns a value of '%' or '%null%' - depending on the version - when no value is selected.
See Patrick Wolf's solution for this at Re: Null value handling in LOVs
I include this Application Process in all my APEX applications ;)
Now let's look at using the equivalent of Oracle Reports Lexicals......
First-off - this is based on the APEX SQL report - NOT Interactive Report.
It relies on the fact that you can let the query be parsed only at runtime.
1. Define an SQL report entering the 'core' of your query.
With a query like SELECT ENAME, JOB FROM EMP
Select 'Generic Columns' option in the 'Column Headings' section
Finish the report creation
2. Define a page item - say P200_LEXICAL - type text on the page
3. Edit the report and update the SQL query to include your lexical page item
SELECT ENAME, JOB FROM EMP &P200_LEXICAL. (REMEMBER THE '.' AT THE END)
Ensure that the option "Use Generic Column Names (parse query at runtime only)" is selected at the bottom of the query
4. Add a button to the page -using 'Create a button displayed among this region's items' the will submit the page.
5. Run the page - you will see all the employee names and job desdriptions
6. Enter a where clause into the 'Lexical' textbox - say "WHERE ENAME LIKE 'K%'" and click the 'Go' button
Voila! your where clause is magically applied.
Try any variant you like adding an ORDER BY clause etc...... this is FUN!
7. Clear the value of the LEXICAL and click go.
Edit the report and move the &P200_LEXICAL. into the selected columns (or add another one)
SELECT ENAME, JOB &P200_LEXICAL. FROM EMP
8. Run the page
Enter ",SAL" in the textbox and "Go"
We can add as many columns as we like (subject to the "Maximum number of generic report columns:" set below the SQL query in the report edit section)
Now because we have all the flexibility in APEX of setting page items using SQL or PLSQL you can set the value of the lexical programatically, or just pre-set a few values in an LOV - the options are limitless.
While I've never had the need to use lexicals - you can see that APEX provides the most Flexible Lexicals in town.
Eat your heart out "Oracle Reports"!!!
Have fun
Mike

Changing a Query do not show Results in the PLD Format

Hello Experts!!
I have a PLD report, and I changed the query a BIt
let say the oiginal query is select 'HELLO' from OINV where DocEntry between 100 and 110
but then I Changed to +select 'HELLO' + World' from OINV where DocEntry between 100 and 110+
But The PLD do not reload Data, there is any way to change this?

Gordon Thanks for your answer,
but maybe i didnt explain myself clear.
let me explain a bit:
When you create a Query in the Query Manager, you can create a Print Layout.
then you can modify in
Tools>Queries>Query Print Layout
but that Layout is related to the Query you just did.
but when you change the query the Layout wont change ...
I think SAP do not work well with this, I think that Query Manager shoud have and Update button and then go and upate the query in PLD ... well thats all

CREMDM Change pointer query

Similar Messages

Maybe you are looking for