Critical problem with deleting templates from custom MPs

Hello,
I created several management packs with classes inherited from SR, RA, MA and with forms, did manual change (type projections, references), made bundle and imported MPs, tested it, all works good, BUT if I try to delete RA or MA from SR I see
an error, also If I try to delete entire SR template I see an error:
Cannot locate 1|SR_Workplace|1.0.0.0|Template.2d91857973454892beb3df01a97aa68d||.
Cannot find ManagementPackElement [Type=ManagementPackObjectTemplate, ID=Template.2d91857973454892beb3df01a97aa68d] in management pack ManagementPack:[Name=SR_Workplace, KeyToken=, Version=1.0.0.3].
So I can create templates and cannot delete it in the Templates view, how to solve it???
If I try to delete RA and MA template from SR I see 44 errors:
: Verification failed with 44 errors:
Error 1:
Found error in 1|SR_Workplace|1.0.0.0|Offering10efc13c0d6f45009263ecc8a0d9c1f2/GeneratedId_PresentationMappingTemplate0/GeneratedId_Sources0/GeneratedId_Source1/GeneratedId_Targets0/GeneratedId_Target1|4|RequestOffering/PresentationMappingTemplate/Sources/Source/Targets/Target
with message:
Invalid Presentation Mapping Template. The path is not found in the target template.
and more with same message

You need to delete the Request Offering(s) based on this Service Request template. That is what it is complaining about.
http://codebeaver.blogspot.dk/

Similar Messages

Help? Problem with deleting photos from I-photo?

I have created some New Event trash folders to drag all my deleted photos from the trash bin as advised. I had thousands of deleted photos to deal with. Now the problem is that the bin looks empty but it still indicates that there are over 7000 photos left in it. I cannot see those items so I cannot drag them out. Should I start reloading the trash bin (small amounts at a time!!) when there is still an amount in it??? How do I get rid of the remaining items? Should I just go and do a repair or rebuilding now?? Please help! Thanks!

Should I just go and do a repair or rebuilding now?
Yes.

Problems with deleted Podcasts from iPod Touch (Проблема с удалением)

У меня проблема с удалением подкастов с моего iPod Touch (версия прошивки 2.2, iTunes 8.0.2.20)
Некоторое время назад я скачал через сам Ipod некоторые подкасты, в другое время с компа, после все синхронизировал и все уровнялось (переписалось недостающее туда и обратно). Сегодня я хотел все удалить и в настройках синхронизации моего iPod я просто снял галочку синхронизации и применил. После все плейлисты касательно подкастов были очищены, а вот сами файлы остались, т.к. в первую очередь суммируя то что у меня должно было быть и что было разница была в 3 гига.
С помощью SharePod решил проверить действительно ли так то что я думаю и оказалось что он увидел эти файлы, которые должны были быть удалены, но т.к. версия базы данных иная чем то что он может понимать программа, удалить я их не могу. Прошу помочь.
I have a problem with the removal of podcasts on my iPod Touch (firmware version 2.2, iTunes 8.0.2.20)
Some time ago, through the iPod Touch I downloaded some podcasts, at other times from the computer, after all synchronized (rewritten podcasts from my computer and ipod). Today I want to delete everything and in sync to my iPod settings, I took a tick synchronization and applied. After all the playlists from podcast has been cleared, but the files themselves remain as the free space was at 3 Gb fewer regulations.
Using SharePod checked their version and proved that SharePod saw no deleted files to be erased, but because version of the database other than the fact that he could understand the program, I can not remove them. Please help.

You can only sync with one computer. I would backup to one computer and then restore from backup.
iOS: Back up and restore your iOS device with iCloud or iTunes

Problem with deleting record from the report.

This is my first post here, just to let you know I just started playing with Apex.
Here we go:
I have a page with report where the link to the record I have changed with ULR to the javascript:
javascript:doDelete(#RECORD_ID#)
I have created javascript in the HTML Header of the page
<script>
function doDelete(id) {
if (confirm("Are you sure you want to delete selected record?"))
$x('P3_DEL_ID').value=id;
doSubmit('DELETE');
</script>
and finally created a process for the page On Submit - After Computations and Validations.
declare
var_id number := :p3_del_id;
begin
commit;
Delete from mytable where record_id = var_id;
commit;
end;
I don't get error messages but record is not deleted.
Thanks for help in advance.
Robert

Robert,
That's the problem. With that type selected, change the value in the textbox to just: DELETE
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
You can reward this reply by marking it as either Helpful or Correct ;-)

I am having problem with delete photos from photostream

I'm trying to delete the photos of streaming from icloud.com and does not display the warning of on this occasion could not restore photos streaming due to an error on the server
Sorry my English in really bad LoL

Tanks Carolyn
I've tried this, but does not allow me, deployed me this error for several days
Add the Pic
Waht do you think? Problem of Win7?

Problem with deleting files from new Zen St

I recently bought a Zen Stone and today needed to delete some files. Did this from Windows (like with my Zen Nano), but this did not free any space on the Stone.
Went to browse files (albums) on Stone and found several names that did not show up in either a Windows Explorer or Media Lite search.
Apparently when I deleted the old files, they did not actually get deleted (guess I have to use Media Lite to do this)
Any suggestions as to how to remove these files without reformatting?

Hi,
Do you expect anyone to read that? Please use code formatting when you post code. See the formatting tips:
http://forum.java.sun.com/help.jspa?sec=formatting
Kaj

Problem with deleting photos from iPad

I have been unable to remove some photos from my iPad. I have two albums, 'SAVED Photos" and one titled "Retirement Photos." I cannot delete any of the photos in the 'Retirement Photos.' This album was synced from my laptop. I cannot get the delete function to work when I click on the photos I want to delete. Any suggestions?

1. Sync your ipad to your laptop again
2. In iTunes go into your iPad folder and deselect that album from being synced from your computer
3.Then click apply.
That should delete that album from your iPad.
hope this helps

Problem with deleting images from iPhone with Mac

When I connect my iPhone 5 to macbook pro Image Acquire opens. I want to delete all images of my iPhone but with it (Image Acquire) I can't because the delete button is disabled. Why? Maybe because I noticed a locker near the images? Don't know, can help me?

Image Acquire or Image Capture?
Launch Image Capture located in your Applications folder.
Make sure your iPhone is turned on then connect the iPhone to your Mac.
Make sure the iPhone is selected under DEVICES.
See if: Delete after import is available now.

Problem with deleting mail from my AOL account on the Mac Mail Program

It worked perfectly on Tiger. But now that I am using leopard, I get this error message when I try to delete my aol mail on the Mail program.
"The IMAP command “UID COPY” (to Deleted Messages) failed for the mailbox “INBOX” with server error: UID COPY failed Deleted Messages: no such mailbox."
How do I fix this?!?

See this...
http://discussions.apple.com/thread.jspa?messageID=5652832&#5652832

Custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list

I am looking for custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Greetings.
pls check if it helps you.
http://msdn.microsoft.com/en-us/library/office/jj554504(v=office.15).aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Deleting Templates from Numbers

Is it possible to edit or delete templates from My Template Chooser in Numbers?

You will navigate to a folder where your custom templates are kept, select and Delete the template.
In Finder, click on the Go menu (top line). While the Go menu items are displayed, press the Option/Alt key. This will reveal a normally hidden choice, "Library", about half way down the list. Choose this item.
A Finder window will open and you will then choose this path:
Application Support > iWork > Numbers > Templates > My Templates.
Identify your template and delete it (Move to Trash).
Jerry

Problem with remove task from schedule in PWA

In our environment problem with remove task from schedule by PWA.
Problem is only when I want to remove few task in the same time, but the operation one by one is correct.
In my opinion problem is with calculation schedule after remove tasks, column ID include wrong value it means that Number ID does not generate in the correct order same of numer
disappear. Click Calculate button on ribbon causes problem with finshed operation and save project.
Problem occurs only machine with IE 11.0 browser without compability mode, on other machine for example on the same project with IE 8,9,10 everything is correct.
Problem appeared recently, earlier everything was OK.
Txn, Dariusz Moczyński

Hi Darius,
I'm a bit confused. You are now talking about 2 issues.
For the first one, you cannot edit anymore tasks in PWA, with any browser versions? Is it happenonog for any users on any projects? Try the following solutions publish the project from Project Pro and see if it helps. Press CTRL F5 to delete IE cache. Ensure
that your PWA URL is added to the trusted site and/or compatibility sites. Check for the ULS logs or javascript errors.
For the second issue, please refer to my previous reply, this obviously cannot be considered as a bug since it is happening with a non supported browser version and working properly on supported versions of IE.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders

*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-john

I believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture.

Critical problem with locking

Hi All
I have a critical problem with locking
My session 1 does a select for update in a query which has aggregate function. and updates a row.
2 nd session waits till the first session has updated.
But while selecting the data is selects the old data and not the one which Session1 has updated.
Please let me know How do I overcome this .
=======================================================
Session1:
=======================================================
SQL> select * from test123;
NUM S NAME
1 N name1
2 N name2
3 N name3
/***** Here the session 2 waits *********/
SQL> select name from test123 where num = (select min(num) from test123 where status !='Y') for update;
NAME
name1
SQL> update test123 set status = 'Y' where num=1;
1 row updated.
SQL> commit;
Commit complete.
SQL> select * from testing123;
NUM SOURCE SPNAME STATUS
123 Test testing C
SQL> select * from test123;
NUM S NAME
1 Y name1
2 N name2
3 N name3
============================================================================================================
Session 2
============================================================================================================
/**** This happens when Lock is released ***/
SQL> select name from test123 where num = (select min(num) from test123 where status !='Y') for update;
NAME
name1
/*** I do a select again I get the new result .. This is what I should get in first place***/
SQL> l
1* select name from test123 where num = (select min(num) from test123 where status !='Y') for upd
SQL> /
NAME
name2
Thanks
Ashwin N.

I'll give the explanation a shot but I can't find anything explict in the documentation along these lines. By default, the 'FOR UPDATE' clause says lock all these rows AND wait for anybody who might already have them locked to release the lock. However, if the other session changed the data we can't just lock the old version of the row, we have to get the data from the new version of the row. The catch is that we must guarantee statement level read consistency as well. Namely, all the data used by the statement must appear correct from a single point in time. If we waited for the other transaction and it commited, we must move that point up to be read consistent. That means reexecuting any subqueries as of the new consistency point. To summarize, the following happens ...
1. subquery gives num = 1
2. main query want to lock that row but can't so it waits
3. other session commits
4. main query notices the data it wants to lock has changed so it moves up consistency point
5. subquery is rerun for the new consistency point
6. subquery now gives num = 2
7. main query locks row
Richard

Problem with Web Template

Hi,
We are facing some problem in WAD.
We have developed some reports based on views and as well on queries.
As per our requirement we merged all the reports in a Standard web Template, and we are using table and graph as web items for the template, here the user can select any report becoz we have query selection option, then it will display the particular report. But we are getting the problem with the Template.
While publishing the template we will get three tabs 1.DATA ANALYSIS, 2. GRAPHICAL DISPLAY 3.INFORMATION. in the initial screen that means in the DATA ANALYSIS tab it should display only the table, but in our case it is displaying both table and graph.
And also if you select graphical tab then that should highlight the particular tab and with the particular graph, but the tabs is not highlighting when you selecting that.
If you have any solutions please let us know.
Regards,
Nossum Chandu.

Hi
I have having almost similar problem. The difference is that it is other way around.
The problem is from Development server instead from production. I am not using slandered template.
I have done following but fail to resolve it-
1) Loading templates using WAD gives inconsistency error. Object "...." is inconsistent.
Recalling query in QD returns following two errors "BEx transport request is not available or not suitable 0", "Choose an existing request 0"
2) While running the query using TX RSRT2 (Query Monitor support package X), returns error "An error has occurred in the script of this page" Line 11039, Char 1, Error Access is denied and so on...
3) ICM ok, Services are checked.
4) SM50 log does not give any clues
5) There is no URL issue.
6) BW Functionalities are active.
Could some suggest?
Thanks in advance

Critical problem with deleting templates from custom MPs

Similar Messages

Maybe you are looking for