CRM_IC_ERP_BADI should be triggered...

The Badi CRM_IC_ERP_BADI method BEFORE_CREATION should be triggered when we create a sales order in CRM_UI transaction (IC Web Client), all this to to change the sales district VBKD-BZIRK, but we have a problem, it does not.
so the question is if this is the correct Badi?
i´ve have done
u2022     At the moment to create sales order , we put some Session breakpoin in the method.
u2022     At the moment to create sales order , we put some External breakpoint in the method.
u2022     At the moment to create sales order , we put some Explicit breakpoint in the method.
So, when we realize that any breakpoint works, just for test,we tried with a single update in a Z table within this method, but it did not work neither, in fact this update is active but this table remains empty at this time.
Do you know any about this badi?
CRM_IC_ERP_BADI
Thanks in advance...

Well, the Badi is being triggered, the problem was resolved through oss note, so, we installed it and now it works,...but there is another problem related, the method before creation, has two parameters, one of them, it's input-output type, so this is the rightt one, because the other is just input type, so the right one named ct_details is a table, which has four values and 4 fields but i want to add one field. Here the screenshot, in this, i've added row 5, but the parameter when comes into the method, only has 1-4 rows.
http://dl.dropbox.com/u/2144751/23090.JPG
In resume, the objetive is change VBKD-BZIRK sales district, because va03 in ECC has one different, the sales district needed comes form CRM, so for this reason we use the badi "change ERP header data"...
I don't know this is dificult to describe, but that's the problem in general.
In the image you see 4 fields, but all of these aree in VBAK table in ECC, but bzirk is in VBKD, maybe this is the problem, but i need to confirm this.
Thanks in advance.

Similar Messages

Notification Email should be triggered when hit the Apply changes?

Hi All,
Am creating a request form similiar to a remedy form,when ever the user create a new request and submit the request.Notification email will be sent to the user and the admin.
Here when the admin ppl rejects the request,a notification email triggered to the user like request has been rejected .
I have three radio buttons in the Form
1.Submitted(default).
2.Rejected.
3.Accepted.
When the admin edit the request and select rejected radio button,and apply changes ,a notification email should be triggered to the user.
Now i have a after submit process for edit the ,which will be triggered when ever the user hit the apply changes button and it will send notification to both user and admin.
How to achieve the notification email that should be triggered when the admin rejects the request and submit the form???
am using apex version 4.0
when the Admin will select the reject radio button and hit tha apply changes then the notification email should be sent to the user!!
Always appreciate your help!!!
Thanks & Regards,
Ramya.

Ramya wrote:
Hi Gurujothi,
Thanks for your response!.
I can able to send email now.Thing is i need to send an email like when the admin rejects the request.
For eg.
1.Admin opened the request and select the Reject radio button and clicking Applychanges button then the email notification will be sent to the user like,
Your request has been Rejected.
2.If the Admin selects the radio button accept radio button and clicked apply changes,start processing about the request then the Email notification will be sent to the user like ,
Your request has been modified .Request will be notified by the admin.(Working now)
DO i need to create two separate process for the email notification like
one is for all the modifications that the user/admin will do in the form ,once the record is created and another process is for Rejection purpose of the Form.But only one Apply changes button is there in the Form.You don't need two page process, In one single process you can acces the page item session values using *:YOUR_ITEM_NAME* bind variable syntax or V function like this V('YOUR_ITEM_NAME')
So in your PL/SQL code you can easily prepare the email body based on your radio group item's value
declare
l_body varchar2(4000);
begin
IF :Px_MY_RADIO_GROUP ='R' THEN
l_body := build your conditional email body for rejected
ELSIF :Px_MY_RADIO_GROUP ='A' THEN
l_body := build your conditional email body approved
END IF;
apex_mail.send(
        p_to       => '[email protected]',   -- change to your email address
        p_from     => '[email protected]', -- change to a real senders email address
        p_body     => l_body,
        p_subj     => 'APEX_MAIL Package - Plain Text message');
end;
See this http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21674/concept_ses_val.htm#HTMDB03012

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

Action with start condition always triggers

Functionality required: "when its 4 days from the actual date an
Audit is to take place an e-mail should be triggered to the
audit attendees"
I have created a new date rule (4 days before - reminder) and
added this date rule to the date profile 000000000003. I am
using this date profile in my actions and have set a new start
condition to trigger an e-mail alert when "todays date" = my new
date rule. I have set up scheduled conditions which are met.
when i create transactions which meet both the scheduled and
start conditions (from my perspective) the action is getting
triggered to send the e-mail reminder. My new date rule is as
follows:
<?xml version="1.0"?>
<TimeRule>
   <TimeRuleSource>
      <ruleline>
         <AssignTimeExp displaytype="AssignTime">
            <VarTimeExp displayType="VarTime"
                               name="RESULT"
                           position='B'>
              <VarObjectExp displaytype="VarObject"
                                name="SYSTEM"/>
            </VarTimeExp>
            <MoveTimeExp displaytype="MoveTime" direction="-">
               <VarTimeExp displayType="VarTime"
                                  name="ORDERACTUAL"
                                  position="B">
                 <VarObjectExp displaytype="VarObject"
                                name="SYSTEM"/>
               </VarTimeExp>
               <ConstDuraExp displaytype="ConstDura"
                                duration="4" timeunit="DAY">
                  <VarObjectExp displaytype="VarObject"
                                name="SYSTEM"/>
               </ConstDuraExp>
            </MoveTimeExp>
         </AssignTimeExp>
      </ruleline>
   </TimeRuleSource>
When i test it using various dates it seems to work as expected, it returms false when it should fail and true when it should suceed When tested from within the date rule for the FROM and TO date for todays dates i get the following:
Deadlines
Appointment Type RESULT
From SA 10.02.2007 14:27:52 GMTUK
From
Appointment Type ORDERACTUAL
From WE 14.02.2007 14:27:52
To WE 14.02.2007 14:27:52
Duration
Reference Objects
SYSTEM GMTUK CL_TIMECALENDAR_SIMPLE
In my start condition i am testing for my date rule (4 days
before - reminder) = todays date.
Can anyone explain why my start condition is always being triggered
Thanks in advance
Ed

Hello Easwar Ram,
Thanks for your reply.
No, I didn't create an Action Profile. I use standard profile: /SCWM/TU (Shipping & Receiving - Transportation Unit).
I only have created a new Action Definition, Schedule and Start Conditions for this Definition. All work correctly with the exception of the button 'Start Condition Parameter'.
I don't know why the button appears because I didn't define a Condition Parameter for the Start Condition. And when I click on this button I get an error in standard SAP code:
1) li_bor_object ?= l_context->appl.
2) ls_bor_handle = li_bor_object->get_bor_object( ip_objtype = l_objtype ).
L_context->appl has value '' in the debugger. After line 1 the value of the li_bor_object is '' therefore line 2 terminates the transaction with error.
Maybe this occurs because the Action Profile uses a Persistent Class for Object Type instead of a Business Object Repository?

Triggering a sub work flow for multiple users at same time.

I have a scenario in which I have created sub workflow as an activity for approval process. This sub work flow should be triggered for multiple users at the same time and their decison is independent of each other.
This is like creating multipe instance of the same sub work flow and then the sub work flow runs indepedently as a new work flow for each of the approver and the process is completeded for approver independently.
How can this be achieved?

Tyr to do like this,
1. First include the subworkflow in the main workflow template.
2. Now include standard Block Step in the main workflow template.
3. In the block select the block type as ParForEach.
4. Before doing the 3rd point make sure that all the agents for whom you want whom you want to initiate the workflow, populate them in a Multiline conatiner element.
5. Once completing 3rd and 4th points open the block step under the tab ParallelProcessing assign the multiline container element name in the for e;g if the multi line container element name is COSTCENTER then do the binding like below. the conatiner element COSTCENTERLINE is created by default once you include the multi line conatiner element under parller processing tab.
&COSTCENTER[&_WF_PARFOREACH_INDEX&]& --------> &_COSTCENTER_LINE&
Now assign the agent of the subworkflow as COSTCENTERLINE , imean if suppose you have 3 entries in the internal table then three separate and for three different agents the workflow is instantiated.

How to avoid triggering of a workflow multiple times at the same time?

Hello Workflow Gurus,
This is the situation.
I have a Notify requisition creator workflow. This workflow is triggered only when a PO is completely released(this Po is created with respect to a purchase req). I have implemented multiple release strategy in my PO workflow. Meaning, if a PO is created for 5 million, 4 entries are created in the release strategy(P0, P2, P3 and P4). Some approvers have authorization to approve P0 and some have authorization to release P2 etc. Before an approver can release P4, P0, P2 and P3 shuould be approved first.
My problem is when a approver has auth to release both P3 and P4, and if he hits the SAVE button, it is completely released and 2 notify req workflows are being triggered. I use the release indicator = 'C' (completely released) to trigger thos notify req creator workflow. In this case both workflows are triggered at the same time and date. I somehow have to say if this is triggered at the same date and time, complete one workflow.
BTW, I am not using any user exit to trigger this. This notify req creator WF is triggering event is "RELEASED'. When pO is completely released, 'RELEASED' event gets triggered which caused the notify req creator WF trigger.
How can I accomplish this?
Thanks
Rachana

Hi Rachana,
Another way you could acheive this is to use start conditions for your workflow. You could specify that your workflow should get triggered only for release codes = XX or release strategy = XX, etc.. This way even after 1 stage of approval, when the approver clicks on SAVE, the release codes change and because there is start conditions in the workflow that would prevent another instance of the workflow from getting triggered.
For example, in your case, I presume PO, P1, P2, etc are your release codes.
You can have a start condition in your workflow wherein you specify that the workflow should get only triggered for release code = P2 [assuming release code P2 is always the 1st stage of approval]. So, once the approver for P2 has completed and Saved, since there is a start condition, there wouldnt be any other workflow instance started. By this way, any stages of approval wouldnt cause another workflow to initiate.
Hope this is what you have been looking for ?
Satish

Triggering of Process Chain in BW from R/3 system

Hi,
We have a special requirement where in the R/3 system (Project systems), the business user creates and saves a project.
Currently we have a process chain for this master data which loads every 10 min on a daily basis, but many times it happens that the new chain starts before the first one gets finished, thereby creating a lock with the loads.
To counter this we are trying to use a functional module at R/3 which gets triggered whenever the business user creates and saves the project in R/3. Though this program worked for us, but a new issue came. If the user creates 2 projects and saves it two times in a span of just 2 or 3 min, then once again the collision of chain occurs.
Our purpose is that, once the old chain finishes, then only the new chain should get triggered. To achieve that we tried to find some options and found a table called RSPCPROCESSLOG which is present both in BW system and R/3 system. This table consists of the start and end time of a chain. So based on these fields of the table we can achieve the above. But this table is not configured to capture the logs in R/3 system.
Please do let me know how to configure the RSPCPROCESSLOG table in R/3 system to capture the chains timing of BW. Otherwise suggest a way to achieve this task.
Regards
Vishwanath

in rough :
create table in r/3 (eg z_chain_status) : via se11. insert two fields : - Process_chain char 60
                                                                    - Active : char 1
R/3 create FM : via se37 (eg Z_update_chain_status)
import parameter = status
process chain can be hardcoded or also defined as varaible, as you wish...
select status from z_chain_status.
status = import parameter
modify z_chain status
BW : create program : via se38 z_update_status_in_r3
parameter = status
call function z_update_chain_status destination R/3 system status
create two variants of program :
varaint z_active : with parameter status = 'X'
varaint z_inactive : with parameter status = ' '
process chain
step 1 = start
step 2 = abap process type
         progam : z_update_status_in_r3
         variant z_active
step 3 - n : your loads
step n + 1 : abap process type
         progam : z_update_status_in_r3
         variant z_inactive
R/3 user-exit or business addin : slect from table z_chain_status;
if active = 'X'. exit. else trigger BW pc (I suppose as it works do today)
M.

Multi-Layer Document Script Triggers in PDF Form

I have a PDF form that has a total of 5 pages with text fields and navigation buttons. I would like the form to hide/unhide pages based on user input. For instance, the user will start on page 1. Once the user completes all the fields on page 1 the user will click on a button I laid out at the button of the page called "Next" and at this point a validation script should be triggered when the users clicks on the button to make sure all fields are completed before showing the information to be completed in Page 2. Basically I'd like my form to guide the user to the next page as long as the previous required fields are completed before the next page is shown (unhidden). If the fields from the previous page are not completed then the next page(s) will remain hidden.
How can I go about designing my form to do just that? Any and all your advise, input and help is greatly apreciated!

You can use templates for this:
http://livedocs.adobe.com/acrobat_sdk/9/Acrobat9_HTMLHelp/wwhelp/wwhimpl/common/html/wwhel p.htm?context=Acrobat9_HTMLHelp&file=JS_Dev_Templates.80.1.html

Event from Change document not triggerring

Hi
I've used chnage document FMRESERV to track change in table KBLP-DELTAWTAPP for any value change, but although I'm chnaging amount from FMX2, the event for this chanhe document is not triggerring. Can you please help me how to resolv the issue.

Further, check if the change pointers are activated in transaction BD61 and if the pointers are maintained in transaction BD52. If these are maintained correctly along with the flag in the data element, the change pointers should be triggered.
Does this help?

Refresh itab is not getting triggered

hi,
SELECT ebeln
bukrs
ernam
lifnr
spras
FROM ekko INTO CORRESPONDING FIELDS OF
TABLE g_it_ekko WHERE lifnr IN r_lifnr.
DESCRIBE TABLE g_it_ekko LINES n.
grid-lines = n.
IF sy-subrc = 0.
MESSAGE s002(zsan) WITH n.
ELSE.
REFRESH g_it_ekko.
MESSAGE e000(zsan) WITH n.
ENDIF.
the message is gettig triggered first but the refresh statement is not getting triggered. i want the refresh statement should be triggered first and then the message.plz help.
thanks & regards,
santosh.

Try changing ur code like below
SELECT ebeln
bukrs
ernam
lifnr
spras
FROM ekko INTO CORRESPONDING FIELDS OF
TABLE g_it_ekko WHERE lifnr IN r_lifnr.
IF sy-subrc = 0.
DESCRIBE TABLE g_it_ekko LINES n.
grid-lines = n.
MESSAGE s002(zsan) WITH n.
ELSE.
REFRESH g_it_ekko.
DESCRIBE TABLE g_it_ekko LINES n.
grid-lines = n.
MESSAGE w000(zsan) WITH n. "warning msg
ENDIF.

Workflow not getting triggered from webdynpro event

Hello gurus,
I have a requirement in which if an employee changes his own information on the ESS portal, then an approval should be done by HR. For this i created a custom webdynpro application in which i fetch the employee data and check it with old data in one view and when user clicks save button the approval workflow should be triggered.
For this i created a custom BO using transaction SWO1. I added a 'CHANGE' event and 'send_data_to_wf' method.
In SWDD i created the workflow which is working fine when i test it in SWDD only. But when i trigger it using FM 'SWE_CREATE_EVENT', only the event is getting triggered and not the workflow. I checked the trace in transaction SWEL in which i can see the 'CHANGE' event under Event column but Name of Reciever Type column is emty. It should display my custom workflow ID. Please let me know where i m lacking or going wrong.
Regards,
Yayati Ekbote

Hello Ricardo,
Thanks for immediate reply. Yes, the linkage is active in SWE2. My custom object type is ZHRAD and event is change. I also tried the FM 'SAP_WAPI_CREATE_EVENT'. But in this FM the event also doesn't get triggered. Using FM 'SWE_CREATE_EVENT' atleast triggers the event. I debugged the FM. The container inside the FM is remaining initial. I am posting my code which i am using.
DATA: pernr TYPE pa0001-pernr VALUE '40000001'.
DATA: objtype   TYPE swr_struct-object_typ VALUE 'ZHRADCHO',
        objkey    TYPE sweinstcou-objkey,
        event     TYPE swr_struct-event VALUE 'CHANGE',
        it_wfcont TYPE STANDARD TABLE OF swcont,
        wa_wfcont TYPE swcont,
        event_id TYPE swedumevid-evtid,
        ret_code TYPE swedumevid-evtid.
wa_wfcont-element = 'PERNR'.
wa_wfcont-value = '40000001'.
APPEND wa_wfcont TO it_wfcont.
wa_wfcont-element = 'SUBTY'.
wa_wfcont-value = '1'.
APPEND wa_wfcont TO it_wfcont.
wa_wfcont-element = 'ENDDA'.
wa_wfcont-value = sy-datum.
APPEND wa_wfcont TO it_wfcont.
wa_wfcont-element = 'BEGDA'.
wa_wfcont-value = sy-datum.
APPEND wa_wfcont TO it_wfcont.
objkey = pernr.
CALL FUNCTION 'SWE_EVENT_CREATE'
EXPORTING
    objtype                       = objtype
    objkey                        = objkey
    event                         = event
*   CREATOR                       = ' '
*   TAKE_WORKITEM_REQUESTER       = ' '
*   START_WITH_DELAY              = ' '
*   START_RECFB_SYNCHRON          = ' '
*   NO_COMMIT_FOR_QUEUE           = ' '
*   DEBUG_FLAG                    = ' '
*   NO_LOGGING                    = ' '
*   IDENT                         =
* IMPORTING
*   EVENT_ID                      =
*   RECEIVER_COUNT                =
TABLES
   EVENT_CONTAINER               = it_wfcont
EXCEPTIONS
   OBJTYPE_NOT_FOUND             = 1
   OTHERS                        = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
COMMIT WORK.

Workflow not getting triggered from Action definition in CRMD_ORDER

Hello Experts,
I have created a workflow which should send mail to partner team in a Change Request.This workflow should be triggered when a particular Zaction is performed on the CR.Zaction is created properly and my workflow is also assigned to it.I have also followed OSS note-733675 and created a workflow container with name "BUSINESSOBJECT" to get the application data into my workflow when the action is performed.My workflow is a background processing one.
I have tested it separately by providing GUID foreground and it works perfectly fine and mail is sent to partner team.But when i perform the action,mails are not getting triggered nor the workflow.I am not even able to check the logs.I am not even able to know if all the action has triggered my workflow.Kindly help.Would appreciate your contribution.
Regds
VLP

Please check in SWI2_FREQ whether the Workflow is really getting triggered.
Thanks
Arghadip

EVENTITEM is triggering twice!!!

Hi,
I needs to send mail if PR is released or unreleased or reject or cancel rejection to the creator.
So I created a workflow which contains event of BUS2105 in START EVENT - RELEASESTEPCREATED, RELEASED, REJECTION_STOP, REJECTION_START.
So if anything happen in ME54N a mail should get triggered.
I used FORK which contains 4 wait event because only 1 event will be triggered for 1 PR. And accordingly formatted mail will be send.
If PR is released for the first time mail is triggered successfully. If that same PR is unreleased and then again released for same release code mail is triggered twice and keeps triggering twice if again it is unreleased and then released.
In SWEL below messages is seen twice for RELEASE event.
BUS2105 RELEASED 20.07.2011 19:23:58 EVENTITEM SWW_EI_EVENT_RECEIVE_IBF
so same mail is triggered twice.
This this is same for all remaining events.
When I show in SWE3 and in OBJECT DATA, their exist a entry of PR(object key) for BUS2105 release event. If I delete that entry then again for the first time it will trigger 1 mail but for next release of same PR will trigger mail twice.
The whole problem is for all events mentioned in FORK.
Thanks in advance.

Hi,
You are correct.
I removed worflow configuration from SPRO for release code. So REJECTION_STOP, REJECTION_START wait event are working properly means only 1 mail is triggered and below msg is shown only once. But as soon as I reconfigure release code in SPRO mail start triggering twice means in SWEL i can see below msg. 2 times :-
message in SWEL --> BUS2105 RELEASED 20.07.2011 19:23:58 EVENTITEM SWW_EI_EVENT_RECEIVE_IBF
As you said their might be some configuration problem of release code, So I developed a separate workflow which has only 1 event RELEASE and no WAIT EVENT is used, then it works perfectly means only 1 mail is triggering.
So I also think that the problem is of WAIT EVENT(receiver type EVENTITEM) and RELEASE CODE configuration.
I think, I need to control the receiver type --> EVENTITEM triggering for release code.
I don't know how to solve this issue. Please help to solve the issue...
Thanks & Regards,
Mihir

Triggering a scheduled event based on the approval status

Hi,
I have created schedules for my project (one task and one milestone) with three phases(draft,approval,approved). The milestone is dependent on the task.Task is created for draft phase and milastone for approval phase
Now after creating the schedules when I have saved the project, even before i put my project in the draft phase the schedule is getting triggered and can be seen on the workbench in the events channel.
That means the schedules are getting triggered based on the date irrespective of the task or milestone being completed and also the schedule for a task needs to be triggered each time until the task is completed.
So now I want accomplish two things -
1. How can I trigger the schedule only when the user puts it in the draft phase or any required phase ?
2. How can I send a mail to the collaborator each day until he proceed the project to approved status and only on getting "approved" status the milestone schedule should be triggered.

Both would require scripting...
on phase change, add the required events
build a custom class that gets called nightly via scheduled task and searches through the projects meeting your criteria and sends them an email reminder.
-Howie Wexler
www.craftysystems.com

Strange ZEN logout event triggering

Strange ZEN logout event triggering
Hi!
ZCM 10.3.2, Windows XP/7, Novell Client installed, have a bundle associated to device and should be triggered at ZENworks logout. This all seems to work ok, in ordinary way. But, when user auth is ok with Novell Client (against eDir), but is not attached with DLU via ZEN and appear Windows Workstation login screen and user cancel this dialog and return to Novell Client login screen, then before mentioned bundle is triggered, in some unknown for me reason. Because there is no ZEN login, not speaking about logout. I have similar bundle set to trigger at user login ... it does not run same way. Also, don't see same behavior when bundle is set to run at user logout.
Any ideas?
Btw. this kind of cancelling login is seems to related to getting a'lot of Bundle.ItemCreationError's described in http://forums.novell.com/novell-prod...ionerrors.html.
More thanks, Alar.

Originally Posted by NovAlf
Strange ZEN logout event triggering
Hi!
ZCM 10.3.2, Windows XP/7, Novell Client installed, have a bundle associated to device and should be triggered at ZENworks logout. This all seems to work ok, in ordinary way. But, when user auth is ok with Novell Client (against eDir), but is not attached with DLU via ZEN and appear Windows Workstation login screen and user cancel this dialog and return to Novell Client login screen, then before mentioned bundle is triggered, in some unknown for me reason. Because there is no ZEN login, not speaking about logout. I have similar bundle set to trigger at user login ... it does not run same way. Also, don't see same behavior when bundle is set to run at user logout.
Any ideas?
Btw. this kind of cancelling login is seems to related to getting a'lot of Bundle.ItemCreationError's described in http://forums.novell.com/novell-prod...ionerrors.html.
More thanks, Alar.
Hi Alar,
Do you have any update on you problem because I have the same issue and I am wondering if you found any way to bypass it??
I found another thread but no solution:
http://forums.novell.com/novell/nove...ter-login.html
Thank you in advance for your answer,
OAKFND
PS: Zen version is 11.1

CRM_IC_ERP_BADI should be triggered...

Similar Messages

Maybe you are looking for