CRM integration possibility with gATP through ECC

Hey Gurus,
We would like to setup the integration between CRM (731), ECC (606) and gATP.
But I will NOT setup gATP integration directly with CRM. But rather CRM sales order replicated in ECC, ECC should perform the ATP check by calling gATP. Afterwards the ECC sales order replicates back to CRM. Then CRM get the ATP result from gATP indirectly.
And it should not requires performing ATP check manually in VA02 after CRM order replicates to ECC.
Has anyone experience such indirect integration between CRM and APO/gATP?
Thanks,
Br,
Ying

Hi Bala,
Thanks for the input.
While we have the RFC and Logical setup between ECC<->SCM.
And data exchange between CRM and ECC has also been established.
Currently we can run ECC-APO gATP integration.
The thing is we want to integrate CRM into this gATP check through ECC.
As you mentioed: RFC and connections between ECC - APO- CRM, do you mean besides ECC <-> SCM/APO connection, we should also setup the RFC and logical system connection in bi-direction between CRM <-> SCM/APO?
From CRM side, there is one customization about ATP check - "ATP Profile", it can be set as "ECC ATP check" or "No ATP check". (we do not want to use "APO ATP check" profile in CRM).
Based on your experience, which one of the scenario/ATP check possibility would work out for the delayed ATP check scenario?
Looking forward to your further input.
Thanks,
Best regards,
Ying

Similar Messages

Relink CRM Business partner with customer in ECC

Hi all,
In our organization, most business partner master data is automatically replicated with ECC.
Table BUT0ID contains the link between a BP and customer on ECC.
For some reason it happens regularly that a CRM BP gets a wrong link.
I.e. BP 80001234 is by accedent linked to 80001000, but it should be 80001234.
I'm asked to provide a solution to change this link.
With BAPI's 'BAPI_IDENTIFICATION_DELETE', 'BAPI_IDENTIFICATION_CHANGE' and/or 'BAPI_IDENTIFICATION_REMOVE' it's easy to modify table BUT0ID properly.
But whatever I change, the replication is still carried out on the wrong customer.
Afters hours of debugging and tracing I couldn't find the reason. Is there perhaps an other table to change?
Did any of you have the 'golden tip' for me to fully Relink?
Thanks a lot in advance,
Sijmen

Hi Sijmen,
Try FM bupa_identification_change. Ii think that will work for you.
Thanks,
Kumar.

Customer specific codelists in integration scenario with CRM onPrem

Hi,
we are working on an integration scenario C4C <> CRM onPrem. The businesspartner masterdata should be editable in C4C and CRM.
We have several customer specific fields on the businesspartner in both systems.
In CRM we have implemented customizing for the values of these fields via customizingtables that can be maintained with TX:SM30.
We can also create finetuning-activities for the maintenance of the code lists for these fields in C4C.
As these customizingtables can have around 1.000 entries per table we are searching for a solution to maintain the values just in CRM instead of maintaining them twice.
Does anybody has an idea how to replicate customer specific codelist-values from CRM into C4C? Or maybe a valuehelp in C4C that retrieves the values via webservice from CRM?
Thanks
Danny

Hi Danny,
We have requirement like get all Oper Order based on Account from ECC to cloud and we have successfully achieved using External Web Service Integration.
We have consume ECC web service integration and retrieve all Open orders based on Account ID and display in the table.
So as per my knowledge you can read all value using web service call and maintained in custom OVS ( I have never tried ).
You need to check whether is it possible or not using custom OVS but if it is working for table than it may be work for custom OVS as well.
Please check this post below may be helpful to you
SAP Cloud SDK : Bi-directional Custom Web-service Integration with PI
Regards,
Mithun

How to create complaints with reference to ECC Billing document (CRM 7.0)

Hi experts!
I use ECC 6.0 and CRM 7.0.
I have to create CRM complaints (ZCLR - CLRP) with reference to ecc billing documents.
I read the following topics and help:
1. How to create complaints with referenceto ECC Billing document
2. Re: How can we transfer billing documents from SAP ERP to CRM 2007?
3. http://help.sap.com/saphelp_crm70/helpdata/en/46/029ba32e675c1ae10000000a1553f6/frameset.htm
Made these settings:
1. Define the Business object type
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Define Object types for Transaction reference
2. Assign Business Object Types to Transaction Types
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>Assign Business Object Types to Transaction Types
3. Implement a BADI - CRM_COPY_BADI_EXTERN.Check Implementation CRM_COPY_BADI_BILLDO for more information on the coding for referencing the ECC Billing document.
Goto SPRO>CRM>Transaction>Settings for Complaints>Integration>Trnsaction Referencing>BAdI: Create Complaint with Reference to External Transaction.
but still do not know,
1) if I should pre-replicate billing documents into CRM ?
2) Or, the system uses the RFC to find these documents in ECC to create reference?
Please help me.
Best regards Kostya.
Edited by: Kostya Khveshchenik on Oct 20, 2010 2:09 PM

not resolved =(
Edited by: Kostya Khveshchenik on Nov 19, 2010 8:50 AM

Is S-Curve possible for SAP PS ECC 6.0 through ABAP?

Hi Experts,
i just want to know that, Is S-Curve possible for SAP PS ECC 6.0 through ABAP coding?
if yes then plz provide material on it.
Waiting for the valuable inputs.
Regards
Neha
Edited by: neha1.gpta on Jun 18, 2010 12:02 PM

Divyanshu - sorry to ask but can you explain why i need to update r3load and r3trans to resolve this error? Just want to understand why I'm doing a correction so I can learn from the same.
Also, can you clarify the file update process:
For R3load:
a) the r3load used by the command is dated 8/16/2011 (location:C:\usr\sap\AVV\SYS\exe\uc\NTAMD64\...)
b) the r3load i have in my db folder is dated 10/23/2011 (location:C:\Final\Installer\BS7i2011_Installation_Master_\DATA_UNITS\BS2011_IM_WINDOWS_X86_64\ORA\UC\...)
Do i replace (a) with (b)?
For R3trans:
How do I update this file?
- Cobain.

ECC CRM Integration Guidelines

Hi,
Could you please help me with ECC CRM Integration/ Replication steps.
We are on ECC6.0 and CRM5.0 systems.
Points will be awarded.
Prachi Shah

Hi Prachi,
The replication guide for CRM and ECC can be found at the following link
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
The docs are
1. B09: CRM Customizing Replication
2. C03: CRM Master and Transaction Data Replication
The docs for connectivity are
1. B01: CRM Generation
2. C71: CRM Connectivity
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

I am getting old and looking forward to use I Pad as a Phone if possible through WIFI! I this possible? The screen is to small for me! If possible, with new I Watch taking calls, other uses through I Pad!

Like I wrote on title, I am getting old and it is not easy to see E-mails, news etc. on a I phone! New I phone will not help me for the size.
If possible, everything without calls, I would like to use I Pad as direct unit, and for calls through I Pad over WIFI all calls. If a call as Skype, I would like
to use the I Pad as a monitor. Is this possible?
I found on a side that there is a product for people for better hearing, which can be put into the ears, using WIFI with I Phone.
If this product could be used also for I Pad as a Phone for hearing, and the I watch or I Pad as Microphone, it will be great for old Mac users.
Is this possible with our system know?
I am using Mac since Classic II! Would like to continue with the newest items with the possibility for old person with bad Eyes or Ears.
Looking forward for a kind answer
with regards
Christian an old Mac user!

Definitely No

Is it possible to do total integration only with bpel or esb by notuse both

I am doing simple integration. For these i am using bpel for orchestration and ESB for Routing and Transformation. But i am getting these things done with by using bpel without esb also.then why wat is the need for going to use esb?
Can anyone please tell me some futures in bpel which are not possible with ESB and For some features available in ESB that are absence in BPEL?
Can anyone please tell me scenarios of bpel in that esb get failed and scenarios of esb in which using of bpel no use.....

You're repeating topics. But again:
if you want to connect 2 different systems together to exchange data between them probably ESB will be enough to do that. You can use database, filesystem or ftp to populate data and pass them to another system. In such scenario if you can use internal database functionality of any of that systems you don't have to use BPEL to decide what to do with the data and how to do that. ESB can only deliver data from one system to another.
But if you can't use internal functionality of any system (because both are third party and you can't change anything in database for instance) and you still need to decide how to treat the data and where to deliver it or you have to add external conditions not present in the data itself you need BPEL to do that.

Changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)

Hello
Maybe not the best section ..
But we have in mind changing existing Oracle licences on all existing systems (ECC;CRM;PI,BI) with HANNA(and use HANNA DB)..
I wander what would be pro and what cons?
Thank you a lot
Jan

Hi Jan,
If I understand correctly you are going to perform database migration activity in your present landscape. Firstly you have to contact SAP as well as one of the third party hardware vendor (who is going to provide certified HANA hardware). SAP will provide you all the license details.
For whole your migration activity below link will be helpful:-
SAP BW on HANA Cookbook
Migration to HANA made easy with DMO
Regards,
Rafikul

SAP CRM Integration with lotus notes & blackberry (Mobile application) ?

Dear Experts,
Can any one pls explain me rough step in SAP CRM Integration with lotus notes & blackberry (Mobile application) ! I dont want detailed steps but pls explain me some important steps for this integration. Also pls tell me which standard SAP document i hve to refer for it !
As i am totally new to such integraion. pls help me out of this !!!! Helpful answer will be rewarded with full points.
Regards,
Amol Tambe.

Hi Amol Tambe,
Please refer the following SDN threads to find more information about SAP CRM and Lotus notes integration:
Re: Integration of SAP CRM 7.0 with Lotus
Re: Need the connectivity between CRM and Lotus Notes.
However, the above discussion is for CRM online and Lotus notes integration.
Hope this helps!
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 27, 2009 9:41 AM

Can generic function module extractions possible with CRM data sources.

Hi Friends,
can generic function module extractions possible with CRM data sources.
90% extractions are generic function module extractions.
How is it possible without BW adapters..
It's very urgent ...Please.
Thanks,
Basava Raju

Hi Madhu,
Just curious ... if you already have a generic FM extractor then just go into it and find out where it is reading the data from. If its reading data from the CRM system then thre is no need for any BW adapter ... just in case you need any ABAP help ... post here ... I may be of use to you.
Best regards,
Kazmi

Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?

Can anyone help on integrating Unifier with WebCenter Portal ? We are looking for a solution where we can show Unifier pages within WebCenter Portal application. Is this possible ?

If you simply would have posted here first, there are plenty of people who would have informed you of the current policy to have a data plan active on an account during the entire contract if purchasing a discounted smartphone.
Unfortunately, there are just as many on here who would claim the people informing you about this policy of being Verizon plants spreading disinformation and trying to make people afraid to upgrade via this route.
Yes this is a new policy, one which has been pointed out multiple times in these forums. Good luck, but I doubt you will have an outcome over this which will make you happy.
Verizon is closing as many loopholes to keep unlimited data as they can.

Has anyone integrated Rezgo with BC?, can you tell me if it a) possible ,and b)easy?

Has anyone integrated Rezgo with BC?, can you tell me if it a) possible ,and b)easy?

What do you want to integrate?

ALE/IDOC and RFC/BAPI Integration Scenarios with SAP DS for ESA v3

Hi,
we are planning two PoCs of Integration Plattforms. One of our major requirement set is SAP Integration into our existing SOA.
Because we also have R/3 4.7 Systems in production, we are planning to test ALE/IDOC and RFC/BAPI Integration scenarios with these Integration Plattforms.
My question is:
We are looking for are smart solution to get a SAP Test Environment, where we can test ALE/IDOC und RFC/BAPI Integration scenarios.
It is possible to do this with SAP DS for ESA v3 or shall we better use IDES for that purpose?
Best regards,
Steven

Hi Abhishek,
This is our scenario. We are doing an integration of SAP HR r/3 system with the CRM system. We need housing information details of the employees which we have in custom infotype 9310 in SAP HR system and we need those details in the CRM system. So am planning out for an ALE/IDOC approach for the integration and gonna maintain the 9310 details in a custom table. In the CRM system, we gonna build a BOL layer for accessing the 9310 details. Also i'm preparing a HLD for this process. I wanna read and go through few same HLD's before i submit my proposal to my client. Please suggest me and help me out.
Thanks in advance.
Regards,
Arunmozhi.

For CRM 5.0 what is the ECC version supported

Hi,
Can any one help on this
For CRM 5.0 what is the ECC version supported?

ECC 5.0 onwards,
lower versions can also be integrated using some plug-ins
hope this helps
additional info:
SAP ECC 6.0 and subsequent releases will automatically contain all integration interfaces that so far have been contained in the SAP R/3 Plug-In and that ensured the technical integration with other SAP Components.
Customers who run SAP R/3 4.6C, SAP R/3 Enterprise 47x100 and 47x200, and SAP ECC 5.0 will receive additional integration interfaces in a Support Package for PI 2004.1. The delivery of this Support Package will be synchronized with that of mySAP Business Suite. The 2005 delivery is in November as part of Support Package 10. Information about the delievery from 2006 onwards are take place here
This rule applies only for customers with a SAP R/3 Plug-In release PI 2004.1. Customers with PI 2003.1 or older must first upgrade to PI 2004.1 or SAP ECC 6.0.
No new interfaces will be provided for integration between new SAP component releases and SAP R/3 3.1I to 4.6B.
Message was edited by: RH

CRM integration possibility with gATP through ECC

Similar Messages

Maybe you are looking for