CRM Sales Order Not getting transfer to ECC System

Hi,
We had created one sale order in CRM and created sale order is not getting transfer to ECC system. BDOC are ending into error status and following are the error which is getting generated
ERP adapter is called
item is not to invoice0000000010
Service that caused the error: CRM_1O_DELTA_MOB_MBDOC_SRV
We had cross check the item category in CRM and ECC system and it seem to be fine.
We had tried opening the document and it is gettinh opened suceesfully also.
In case if any one had face this issue then please let me know the solution step to get this issue resolved.
With Regards
Ankush Rai
9423404043

Hi Anukush,
To replicate a sales order from CRM to ECC you should have following prerequisties.
1. Master Data: Customer, material should exist in both the system
2.Organization Structure like Sales Org, Division, Distribution Channel (Sales Area) should exist in both the system
3.Same Document Type,Item Category, Item Category Determination should exist in both the system
4.Same Number Range should exist in both the system
Best Regards,
Rajendra Sonawane

Similar Messages

Sales order not getting created in background.

I am using user exit to write my code to create sales order of basic type ORDERS05 with function module idoc_input_orders, and process code ORDE with my own message type.
If I run the program in foreground message KUWEV-KUNNR is not an input field comes.
IF I press enter the sales order is getting created with staus 53..
But in background ERROR MESSAGE comes as:
Function module not allowed: IDOC_INPUT_ORDERS.
Please give suggestions.

Dear Sir,
Please check the FI Period is opened and FI account Number is opened.
Thanks and Regards
N.soma Sundaram

Open sales order not getting updated in FD32

HI
We are configuring Credit management, and found that the open sales orders are not getting updated in FD32.
I have checked all the settings in OVA8 and all are working fine. This is a Static credit check and system is blocking the customer in case, the limit is exceeded. But the values are not getting reflected in FD32, for open sale orders, that are not blocked.
Info structure S066 in OMO1 all are configured perfectly. I have run F.28 and no log was issued.
Request to suggest other reasons for not getting updated in the table.
I have gone thru the previous threads, but cud not find any solution.
Regards
Vamsi Javaji.

Hi Vamsi Javaji
First of all check in OVA8 wheather you have checked Open sales orders feild or not . Secondly check in your pricing procedure wheather you have maintained Subtotal A or not for the Net Value .Also check wheather you have assigned to your sales document type correctly or not Finally check in OMO1 wheather S066 has been assigned correctly or not
Check wheather you have assigned the Credit control area to the customer in CMR , in sales tab
Regards
Srinath

Sales order not getting confirmed because of oldest of open items overdue.

Hi all
Businesses using the auto order creation for sales, sales order getting created but when I check it in schedule line the quantity is not getting confirmed even quantity is available and credit limit is also available and there are no open items due. When I check ,availability tab in VA02 manually, its coming oldest of open items overdue.
Pls help...
Regards
Nagesh

Hello,
please check in the system in ova8
Credit check against oldest open item
Indicates whether the system carries out a credit check based on the age of the oldest open item.
The oldest open item must not be older than the number of days specified.
If in ova8 it checked then system is checking the oldest open Items .
Thanks,
venkataswamy.y

BAPI_SALESORDER_CHANGE Quantity in the sALES ORDER NOT GETTING UPDATED.

Hi Experts,
i am adding a new line item to the sales order with line item number and material number and QUANTITY.
by using BAPI_SALESORDER_CHANGE bapi every thing is geeting updated but QUANTITY field is not getting updated.
regards,
Jay Sawant.

I m using this code..
Fill Line Item Details
fl_order_itm-itm_number = line_item + 1000.
fl_order_itm-material   = mpn.
fl_order_itm-target_qty = qty.
   fl_order_itm-sales_unit = unit.
APPEND fl_order_itm TO it_oditm.
Fill the Header Order Details
fl_order_itm_inx-itm_number = line_item + 1000. "added
fl_order_itm_inx-updateflag = 'U'.
fl_order_itm_inx-material   = 'X'.
fl_order_itm_inx-target_qty = 'X'.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
    EXPORTING
      salesdocument            = vbeln
ORDER_HEADER_IN             =
      order_header_inx         = order_header
SIMULATION                  =
BEHAVE_WHEN_ERROR           = ' '
INT_NUMBER_ASSIGNMENT       = ' '
LOGIC_SWITCH                =
NO_STATUS_BUF_INIT          = ' '
    TABLES
      return                   = it_ret2
   order_item_in               = it_oditm
   order_item_inx              = it_oditx
PARTNERS                    =
PARTNERCHANGES              =
PARTNERADDRESSES            =
ORDER_CFGS_REF              =
ORDER_CFGS_INST             =
ORDER_CFGS_PART_OF          =
ORDER_CFGS_VALUE            =
ORDER_CFGS_BLOB             =
ORDER_CFGS_VK               =
ORDER_CFGS_REFINST          =

VAT /CST% manually in the sales order,not getting copied to the Invoice

Dear Friends,
If I change the VAT /CST% manually in the sales order,its not getting copied to the Invoice
Thanks
Ivy

Dear Friends,
Thanks for your valuable inputs....
I have maintained the condition record for the combination of delivery plant region and the customer region.......assigned dummy tax code against the Tax condition...therefore I think there wont be any problem in posting billing doc to accounting doc.
There are different combinations,where sometimes the user is liable for 2% CST ....sometimes 4%CST... but I am able to pick one tax value say 12.5% CST across and maintained the tax condition types - manual entry has priority, as allowed the user to change the value manullay as per the user requirement ....
Now if i change the Tax condition value in the sales order ,the same is not reflecting in the Invoice....this also is applying from contract to a sales order...
Please advice me accordingly...
Thanks
Ivy

Sales order not getting closed

Hi,
I am creating delivery document through SDK based on existing sales orders. it creates it with perfect quantity, tax , amount and doctotal values but the original sales order does not get closed contradictory to SAP's standard flow.it does shwo all the row-status as closed. but the document status remains open.
what could be wrong? do i have to close it through SDK?
Thanks,
Binita

Binta,
As Petr said, i have added a SO in normal SAP UI without any addon, and copied it to Delivery and changed the Freight and added the delivery, in this case, the SO remains open.
So I guess u can summarize that if any changes occur the SO would remain open?
Hope it helps,
Vasu Natari.

Sales Order not getting Pick Release and getting BACKORDERED

Hi Gurus,
There is an order in oracle production. When user try to Pick Release this order the order is not getting picked instead it is getting backordered. The line quantities are available and it is also not in hold. I also see the log files of ‘Pick Slip Generation report’, but it shows no error message. Do you have any idea on this?
Thanks,
SamD

Are the quantities in a reservable subinventory?
If you go to material workbench, does the quantity show as available to reserve?
Did you specify a subinventory in the release process?
Does the sales order line have a subinventory on it?
Check if your onhand is in staging subinventory?
Check older threads on this issue such as http://kr.forums.oracle.com/forums/thread.jspa?threadID=603998
Sandeep Gandhi

Sales order not getting confirmed!!

we have a situation here.
when i see in co09 it looks like following. I am not able to understand why sales order of 70 is not getting confirmed though ample reciept element is available (pch ord)? and why sales order of 350 on 25th aug is getting partially confirmed?
Date                 time                 category   document               receipt/req           conf q           cuml atp q     atp q
08/23/2010     08:12:14     Stock     Distribution Center     70      0      280-            0
08/20/2010     09:58:00     Deliv.                                70-     70      280-
08/20/2010     23:59:59     Deliv.                                70-     70      280-
08/20/2010     23:59:59     Deliv.                                140-     140      280-
08/20/2010     23:59:59     Deliv.                                70-     70      280-
08/24/2010     12:00:00     PchOrd                                1,540      0      0                  0
08/25/2010     00:00:00     SalesOrder                                70-     0      0
08/25/2010     07:00:18     SalesOrder                                350-     0      0
08/25/2010     07:00:18     SalesOrder                                0      280      0
moreover why last column (atp quantity) is showing 0 quantity when pchOrd OF 1540 is available? on later dates last column has recipt quantity visible. example-
09/07/2010     00:00:00     PchOrd                                350      0      350      350
09/07/2010     00:00:00     PchOrd                                1,470      0      1,400      1,050
am i reading it correctly? is there any link which says how to read these results?

Madhu,
It is not config, it is part of runtime. /SAPAPO/BOP > Parameters check tab
Check prerequisite settings
http://help.sap.com/saphelp_scm70/helpdata/EN/c6/958139a17cd02ae10000000a11402f/frameset.htm
Best Regards,
DB49
Edited by: Dogboy49 on Mar 29, 2011 10:37 AM

SRM PO not getting transfer to ECC Backend after SP07 upgradation

Dear Gurus
We are in Classic scenario SRM 7.2
Recently we have upgraded SP07 in R/3 system ECC 6.6.
Prior SP 7 upgradation SRM PO created against RFx response were getting transferred to ECC backend in Held status with couple of error messag
(which later user use to do further changes in ECC)
Now post SP7 upgradation, we are finding an error in SXMB_MONI as"Error in Receiver Side ABAP Application
not finding much help in debug thorugh SPROXY
can anyone guide on this issue
Thanks & Regards

Dear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain

Sales Order not getting into BI using 2LIS_11_VAITM

Hi,
I have created some new sales orders in R/3 System and I deleted the setup tables and reloaded the setup tables.
Now I have reloaded my DSO in BI using 2LIS_11_VAITM and I do not see these new sales orders. Is there something that I am missing.
I have done this numerous times before but never ran into this kind of issue and I have tried everything that I can think of. Please let me know if you can think of any suggestions.
Thanks,
Bobby

hi,
you have deleted the delta queue data/datasource? is ur V3 job is stopped?
try to run the setup table filling in background.
delete the setup table content for application 11.
for doing setup table init, u can also do it with delta queue available.do the initialization in background.give the output device as LP01 and save and schedule the job.
u can chk the content but not records as such of the setup table in se11/se16 - mc11setup table.
Ramesh

Sales Order Not Getting Converted to Production order

Hi gurus,
I have a sales order and when on MTO process i try using CO08 to create a production order using with order type ZP02 , sales order no , item no , production plant the production order doesnt gets created . could anyone help me

Hi,
What is the error message you are getting?
Are you using strategy group 20 in material master?
Did you try using other order types?
Regards,
Senthilkumar

PO is not getting create in ECC

Hi ,
    I am in SRM 7.0 SP 3.0 and ECC.. I have developed the custom BRF for Category approver and activated Standard Role Resolver 'RR_SPENDING_LIMIT_APPROVER' for SLAPPROVER which is working fine. . But i am facing an issue that once SC has been fully approved but the PO is not getting transfer into ECC. When I check BBP_PD for the SC the status I can see the below status
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
But when I execute the FM 'BBP_PD_SC_TRANSFER_INTERNAL' manually with the SC GUID I got the error message as
Exception       SYSTEM_FAILURE
Message ID:          BBP_PD                     Message number:           507
Message:
No links corresponding to the specified data could be determined..
I check the BBP_PD After executing the FM 'BBP_PD_SC_TRANSFER_INTERNAL' manually with the SC GUID . The status has been moved to next status..
HEADER     I1015          Awaiting Approval              X
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1106          Shopping cart ordered
HEADER     I1129          Approved
0000000001 I1111          Item in Transfer Process
at this stage I execute the report program 'BBP_GET_STATUS_2' to get the status. but I got the following error
         No Shopping Cart (REQUIREMENTS) Found with Status = Transferred
        Batch program for updating status information for SCs as of Rel. 3.0
         On the basis of the data, no changes possible
        The following RFC destinations were called:
         RFC Destination:                   Call result:
In order to create PO what are configure steps I have to perform..
Regards,
Jr.SRM

Dear Elham,
To find the solution of the problem I think you need to debug.
Follow below steps if this help you
a) Run the report "FBGENDAT"
b) Input the data as below screen shot
c) Then go to se37 execute FM : BAPI_PO_CREATE1
d) You will find the test data directory and test data will be saved as below
e) In this test date change PO number you should get the error which you are getting above.
Thanks
Ankit Jain

MWST not getting determined in CRM Sales Order

Hi All,
I am working on a scenario where we are using MWST for tax calculations. I am able to get the tax calculations correctly in ECC but when I create a Sales Order in CRM, MWST is not getting determined.
I have maintained the following
1) Downloaded the ECC customizing into CRM
2) Downloaded the pricing procedure into CRM
3) Downloaded the pricing conditions into CRM
4) Downloaded the pricing condition tables into CRM
5) Maintained the tax classification for Business Partner
Thanks in advance.
Regards,
Sandeep

Hi Sandeep,
did you try to use the price analysis in SAP GUI (set user parameter PRC_TRACE = X in SU3) to get further details what is missing for MWST determination? There could be multiple reasons for this issue.
Best Regards,
Michael

CRM Sales Order to SAP ECC troubleshooting

Hi,
I'm trying to replicate SAP CRM Sales order to SAP ECC, I have matched (transaction and document type, item categories). But when I create sales order in CRM, the following error occurs in the Web UI:
Transmission log
SALES_HEADER_IN has been processed successfully (Notification S V4 233)
The sales document is not yet complete: Edit data (Notification W V1 555)
Unknown object type 'BUS2032' (Notification E RL 303)
SALES_ITEM_IN has been processed successfully (Notification S V4 233)
Please note that the BDOC messages state in the middleware is processed and everything looks fine in SMW01. The customer and product are already replicated from the ERP
Is there a more user friendly method to debug the error and to know the exact error.
Thanks In Advance,
Ahmed

Hi Ahmed, ,
It seems that the CSA bdoc is green (the internal CRM one) but the second , the replication one, is not created
due to this error.
Here a few advises:
Fistly create the same document directly in ECC. You might already get the same incompletion log as well in ECC and the reason should be quite obvious then.
Check as well in ECC in t-code SE91 as in which program error RL 303 is used. You might have customized code in ECC.
If this is not helping please use as well report CRM_ODE_CHECK_CFG to fing out if there some missing settings in the
BTX interface. See as well note 490932 (it is an old note but the settings mentioned are still relevant for highr releases).
Good luck with it.
Best regards
Christophe

CRM Sales Order Not getting transfer to ECC System

Similar Messages

Maybe you are looking for