CRM Sales Order to SAP ECC troubleshooting

Hi,
I'm trying to replicate SAP CRM Sales order to SAP ECC, I have matched (transaction and document type, item categories). But when I create sales order in CRM, the following error occurs in the Web UI:
Transmission log
SALES_HEADER_IN has been processed successfully (Notification S V4 233)
The sales document is not yet complete: Edit data (Notification W V1 555)
Unknown object type 'BUS2032' (Notification E RL 303)
SALES_ITEM_IN has been processed successfully (Notification S V4 233)
Please note that the BDOC messages state in the middleware is processed and everything looks fine in SMW01. The customer and product are already replicated from the ERP
Is there a more user friendly method to debug the error and to know the exact error.
Thanks In Advance,
Ahmed

Hi Ahmed, ,
It seems that the CSA bdoc is green (the internal CRM one) but the second , the replication one, is not created
due to this error.
Here a few advises:
Fistly create the same document directly in ECC. You might already get the same incompletion log as well in ECC and the reason should be quite obvious then.
Check as well in ECC in t-code SE91 as in which program error RL 303 is used. You might have customized code in ECC.
If this is not helping please use as well report CRM_ODE_CHECK_CFG to fing out if there some missing settings in the
BTX interface. See as well note 490932 (it is an old note but the settings mentioned are still relevant for highr releases).
Good luck with it.
Best regards
Christophe

Similar Messages

Replication of Sales Order from SAP ECC to SAP CRM

Hi,
The scenario I am working on is breifly as under:
Telesales will create sales order directly in ECC. The sales order created in ECC will be replicated in CRM. I have some queries and request guidance:
1. The same sales order type will be used by ECC for creating orders from telesales, as well as regular sales orders in ECC. I need to replicate only sales orders created by telesales. Please guide how to achieve the scenario requirement.
2. There are many 'Z' Partner function in ECC in sales order, some of them are mandatory and others are optional. During replication, if the 'Z' partner functions are not created and maintained in CRM, what will be the impact? Will the sales order replicate or no. Impact in sales order replication of mandatory partner function and optional partner function not available in CRM.
3. Impact of 'Y' and 'Z' condition type (optional) not maintained / imported from ECC to CRM in sales orders.
Regards,
Rajesh

1. In R3AC1 set filter according to your needs for object SALESORDER. There are quite a few fields on which you can set filter.
2. Partner functions will not affest replication. Replication is more strict from CRM to ERP hen viceversa. Also you said that optinal partner functons will be missing, so there is no reason that problems should accore. But of course standard sold-to party and shi-to party should be provided for pricing reasons.
3. Should reprsent not problem, but pricing procedures must be synchronized between both systems.

Error while creating OTR by sales order from SAP ECC to TM

Hi Experts,
We are trying to integrate ECC to TM. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise.
Thanks & Regards,
Aunkur De

Hello Aunkur De,
Could you check if the business partner was assigned in to your location?
I have passed for a issue like that.
Best regards,
Vicente Picardi

How to map the Categorization Reasons (SAP CRM) with Order Reason (SAP ECC)

Hi Team .
I have created a service order for a spare parts material in CRM Web ui , order got saved successfully without errors and had replicated to ECC system.
Issue : When the user is processing for billing, the system is asking for the order reasons to enter for the Item . (Checked the order in the incompletion log in of ECC) . Though we have maintained the categorizations in the CRM System.
The order reasons in the SD (ECC) and categorizations in the CRM are same.
Client requirement: The order created in CRM by mentioning the categorization reasons should automatically replicate to the ECC system without deviation and billing should happen in ECC without asking the order reasons.
Note # Order reasons cannot be removed from the ECC System
Regards,
VCS

Dear Team,
I had resolved the issue on my own .
Sol : We had made the Order reasons mandatory in the CRM Web UI service order and we had removed the Incompletion Log for that particualr transactions types from the SD.
Regards,
VCS

CRM Sales Orders vs. Exits Sales Order ECC

Hi Experts,
In my project, there are somes user exits implemented for sales order in SAP ECC. However, when CRM send to ECC the sales orders, they dont access the user exits, but if the order is processed again - using VA02 - in ECC, the user exits are accessed.
Is it possible CRM send the sales order to ECC and the sales orders access the user exits without any manual intervention?
Best Regards and Tks again,
Nivea

Hi,
The sales order user exits will be processed for the sales orderes created from CRM and flow to ECC.
Except if you have coded like IF SY-SCODE = 'VA01'.In this case you code will not be processed since this is wrong of writing the code.

Customer Credit Limit on CRM Sales Order

Dear All,
Can the customer credit limit be displayed on CRM Sales order(Customer from ECC, we use simple credit check on SAP ECC)
Regards,
Ahmed

Hi,
The standard credit check in SAP CRM calls up the automatic credit check in SAP R/3. You must define an RFC destination, and specify this destination for the credit check.
· To define RFC destinations in CRM Customizing, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Define RFC Destinations.
· To specify destinations for the credit check, choose Customer Relationship Management ® CRM Middleware and Related Components ® Communication Setup ® Middleware Parameters ® Define Middleware Parameters. Then choose the activity Credit Check and enter an RFC destination for the parameter CRMCREDCHE.
You can also carry out an initial data transfer for credit data.For transactions that are still open for which you are reactivating update of credit data, you can initially transfer the credit data for a reorganization of data in SAP R/3. To do this, start the initial data transfer for object CMDOC_NOTIFY using transaction R3AS.
When setting up credit limit check, refer to SAP Note 568157, 570155 and 619500.
With Regards
Selvam T

CRM sales order and APO transaction /n/SAPAPO/AC03

Which sales order is seen in /SAPAPO/AC03 or /SAPAPO/RRP3 when you create an CRM sales order (ATP check is done in APO) and the order is replicated in ECC?
Is the CRM sales order or the ECC sales order item displayed in the APO product availability overview?

Hi Marc,
The ECC sales order display depends on the availability of integration
model and active ATP fields maintained in ECC material master
In APO, the product view display is controlled in Order view
customisation at APO under PPDS
Regards
R. Senthil Mareeswaran.

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

SAP CRM sales order

HI CRM Gurus
Now i am learning SAP CRM,
Please tell me how to create sales order in SAP CRM, how to create customer master record, and material master record.
Isn't possible to create in SAP CRM.
If possible pls tell me path or tcode
Thanks in advance
Satya

Hi
as a standard process , CRM uses the Replicated Master data from ECC .
1) Customer record will be maintained in ECC ( T-code XD01), same will get replicated to CRM
     To view customer master in CRM, use T-code : BP
2) Material master data maintained by MM module will be replicated to CRM
    To view Material master in CRM, use T-code : COMMPR01
    However Service masters can be created localy in CRM using COMMPR01.
3) Employee Master datra maintained by HR module will be replicated and creates BP number in CRM.
     To view Employee BP master in CRM, use T-code : BP
Best Regards
Nagaraj G

PO Creation after CRM Sales Order Creation

I am creating a CRM Sales Order and the moment I save the CRM Sales Order,
it creates a PO in ECC. I need to find out how PO is getting triggered?
When I open the CRM Sales Order it shows a PO already created for this Sales Order.
Has anyone face this or same kind of scenerio ever? If yes please let me know how can fnd the triggering point of PO creation.
Thanks in advance!!
Sachin

Hi Mathivana,
I had faced these issue several time. As per SAP standard logic whenever you saved order in CRM it replicate immediatly in ERP till that time the order will be locked for any further change in CRM to save transaction data intigrity. The lock gets removed once the CSA queue(notification) from ERP update in CRM than unlocked.
You check the in SMW01 transaction and perform search with order number you will find Bdocs are in Intermediate stage(I can't tell reason as it can be so many reason why Bdocs get stuck) -Select and activate the Bdocs once again if you are lucky and it activated your order till be unlocked.
Or else user report most common for this issue "CRM_CHECK_DISTRIBUTION_STATUS" pass order number number and document type to unlock distribution than you will be able to change order.
100 % sure shot answer. Appriciate if points alloted
Thanks,
prem

Is it IPC mandatory for CRM Sales Order standalone (no webchannel)

Hi Consultants,
Do we still require IPC for SAP CRM sales order (standalone) though we don't have in scope Web-channel and ECC integration ..?

Hello David,
Yes, you will still need IPC to execute pricing on your sales order. This is true for any sales scenario in CRM.
The only scenario where you won't need IPC is working with ECC order in CRM via the LORD interface. However since you are running standalone this is not applicable probably.
What you may not need is the IPC configuration UI (which is a Java web app), in case you are not working with configurable products.
However, for pricing your orders you need the pricing engine = IPC.
Best regards,
Manuel

Credit Card number entered CRM sales order is not appearing in R3 Sales ord

Hi,
We are entering our Sales orders in CRM which are gtting replicated to SAP R3,In the credit card scenario ,In some sales orders entered in CRM,where the Credit card numer has been entered,In some cases,the card numer is not appearing in R3 Sales order either in the overview screen or Payment card tab,due to ehich most of the times these cards fail authorization .
Kindly let me know as to what could be the reasons as to why the card numer seen in CRM is not appearing in SAP R3,sales order?
Appreciate your help on this.
Regards
Mohammed Roshan

Hi All,
Looking forward to your valuable inputs on this as to how and why Credit Card number entered CRM sales order iwould not appear in R3 Sales order?
Regards
Mohammed Roshan

How to determine the delivery plant in a CRM Sales Order

Hi experts:
In CRM how to work the delivery plant determination? and I can change the Plan in a Sales Order before its download to ECC?
I download the DNL_PLANT object but i don't understand what is the functionality of these are created like business partner in CRM.
Thanks in advanced by your orientation about these questions that have me a little bit confuse.
Sussie

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

MATERIAL GROUP IN CRM SALES ORDER

Hi
I have download ECC 5.0 Material Group in CRM 5.0.
I can see it in CRM in Product Master as category id, but it is not showing up in CRM Sales Order.
Any help on this...
Thanks
Nitin

Hi Venkat
I have already assigned material group to Ordered Products but not it getting displayed. I am in need of Field Name & Data Element of material group so I can make entries in missing pricing field catalog.
Thanks
Nitin

Wrong contact partner in the CRM sales order come from ISA

Hello,
I'd like to know if is it possible to manage the partner dermination "contact from a shopping basket created in ISA.
in my case, i have a shopphing basket created by a user XX and this shopping basket is used by a other one (user ZZ) to create a crm sale order; The problem is that the contact filled in the crm order is the partner XX instead of ZZ. Is it possible to manage the determination by customizing XCM ou SPRO to define the suitable partner (ZZ)
Best regards.
CMA.

Hello CMA,
Thanks for explaining the problem clearly. Looks like you've got an issue. Though you created an "order" with reference to a "template", ISA doesn't use any Copy function configured in the backend. It is all done piece by piece using Java and ABAP code.
This is certainly a bug in standard code - unless somebody finds a note that explains. I couldn't find any SAP notes on this issue. The "Create new order on the basis of an order template" finally uses the action CreateFromPredecessorAction. While there is code available to address the "Ship-To list", "drop ship - ship-to", "Sold-To", "Requested Delivery date" etc. of the source (template) to target (basket or order), the code essentially misses to change the Contact person of the target document to the current user.
You can address this issue in two ways. # Ask SAP to fix the bug in the above class or # Do it your own way, by just introducing an action to "massage" the data the way you want. The CreateFromPredecessorAction action has one outcome editdoc.
          <action path="/b2b/createfrompredecessor" type="com.sapmarkets.isa.isacore.action.CreateFromPredecessorAction">
               <forward name="editdoc" path="/b2b/updatedocumentview.do"/>
Introduce a custom action ZFixContactPersonAction immediately after like this:
          <action path="/b2b/createfrompredecessor" type="com.sapmarkets.isa.isacore.action.CreateFromPredecessorAction">
               <forward name="editdoc" path="/b2b_custom/zFixContact.do"/>
          <action path="/b2b_custom/zFixContact." type="com.parxlns.action.ZFixContactPersonAction">
               <forward name="success" path="/b2b/updatedocumentview.do"/>
In this custom action, you can add some quick code to "fix" the contact person partner from the header.
import com.sapmarkets.isa.businessobject.header.*;
import com.sapmarkets.isa.businessobject.order.*;
SalesDocument salesDoc = null;
BusinessObjectManager bom =
        (BusinessObjectManager) userSessionData.
        getBOM(BusinessObjectManager.ISACORE_BOM);
salesDoc = bom.getBasket();
    HeaderSalesDocument header =
        (HeaderSalesDocument) request.
        getAttribute(MaintainBasketBaseAction.RK_HEADER);
String selectedPartnerID = bom.getUser().getContactData().getId();
String selectedPartnerGUID = (String) bom.getUser().getContactData().getTechKey();
PartnerList partnerList = new PartnerList();
//Get the document header - partner list value
               PartnerList partnerList = header.getPartnerList();
            PartnerListEntry contactData = new PartnerListEntry(selectedPartnerGUID, selectedPartnerID );
//Set the Contact partner in partner list
            partnerList.setContact(contactData);
//Set this partner list back to header.
header.setPartnerList(partnerList);
return ("success");
Hope this helps with little changes.
(sorry, there I am not aware of any solution with simple customization in the backend)
Easwar Ram
http://www.parxlns.com

CRM Sales Order to SAP ECC troubleshooting

Similar Messages

Maybe you are looking for