Crop and Mask in Adobe Premiere Elements 11

In Premiere Elements 11, when I add a mask to blur an area of the video, the cropping that I applied to remove a band at the top and at the bottom of the video does not work anymore ???
I tried to change the order of the applied effects but it does not change anything.
Any help appreciated.

Flipper
I am not quite sure what I did the other day to get everything to fall into place. Today, nothing was as it was then That was the bad news. The good news (of sorts) was the intriguing revelations that evolved.
I followed your workflow to step 6. I think that you had a typo in that you had "two bottoms" but of no real consequence to the issue at hand.
Step 7 issue ("can't add Effects Mask") was a non issue if you clicked on the Timeline video prior to clicking on Clip Menu/Effects Mask/Apply.
When the Effects Mask is applied by clicking on that Apply, what looks like a duplicate of the Timeline Video 1 content appears on the track directly above the original on Video 1. At this point the previously cropped area in Video 1 content reappears, giving the impression that no cropping of the file was ever done.
1. It looks like what appears on Video 2 traces back to the original on the hard drive not the file that is below it on Video 1, except for the content of the Effects Mask area. More explanation on how I concluded that if necessary. Good enough explanation for the cropped areas getting filled in. But, there is more...
2. If you isolate (ungroup) the top from bottom components here, the top has Crop Panel, Fast Blur, et al in its Applied Effects Panel. Any additional cropping there crops only the Effects Mask. The bottom's Applied Effects Panel has just the routine Motion and Opacity Panel. If you look at the isolated top and bottom, the top presents with the Effects Mask shape with snapshot of area of original that it was supposed to be Effects Masking, and this snapshot is surrounded by black representintg transparency. The bottom presents as the original as seen in Project Assets.
3. If this all started out with the original dragged to the Timeline from Project Assets and then an effect such as the "New Blue Cartoonr Plus Elements" applied to the original, followed by Crop and Fast Blur, the same thing would happen. But in this set of circumstances, the "New Blue Cartoonr Plus Elements" panel would end up in the Applied Effects Panel for the top component along with Crop and Fast Blur.
Lots more to sort out, but for your specific situation, you might consider:
1. Video on Video 1.
2. Apply the Effects Mask for Fast Blur or your choice of Effect.
3. Right click what is the now linked top and bottom components of this task, and select Ungroup.
4. Drag the top to the right, out of the way for the moment.
5. Crop the Video 1 content.
6. Drag the top back into place above the Video 1 content.
7. Highlight both at the same time, right click the highlight, select Group OR leave ungrouped if want that way.
Please review and see if you confirm my exploration into this today.
Thanks.
ATR

Similar Messages

Zoom and Pan for Adobe Premiere Elements 12?

I have Adobe Premiere Elements 12. I would like to zoom and pan into a video, but without that slow zoom in/out effect. Basically, I want it like a quick cut close up then back to the original size. I've been trying but nothing seems to work. There's that slow zoom in/out every time I try to get a quick cut in and a quick cut out. Does anyone have any ideas to get this? Thanks

nbovell94
Please check into the details of the Premiere Elements 12 Pan and Zoom Tool. I think that you may be overlooking your opportunities for what you want with that tool, namely, the "Hold" set and the "Pan Time" set and combination there of.
Please see
Adobe Premiere Elements 11 * Pan and zoom to create video-like effect
Please review and consider and then we can discuss this further if necessary.
Thanks.
ATR

I have a notebook that runs windows 8. Last week I bought and downloaded the Adobe Premiere Elements 13 and made a movie. Unfortunately the film was not good, it does not flow naturally. It features short breaks without stopping, which makes the bad quali

Is the current version of Adobe Premiere Elements 13 certified to run on Windows 8?

Eduardo Cunha
Thanks for the additional information and background on your Premiere Elements projects.
Here are my suggestions for you to consider when you revisit Premiere Elements 13 on Windows 8 64 bit.
a. Music. Actually take your iTunes music into iTunes to convert them to .wav version. And, then import the .wav version
into the Premiere Elements project.
iTunes: How to convert a song to a different file format - Apple Support
b. If you have a 1440 x 1080 HD anamorphic 16:9 source at 29.97 interlaced frames per second, then you (manually) or the project (automatically) set the project preset to
NTSC
AVCHD
HD1080i30
However, when you go to export the Timeline content, then you select an export choice which uses 1920 x 1080 16:9, not 1440 x 1080 which depends on a 16:9 flag to stretch the 1440 x 1080 to 1920 x 1080 for display after encoding.
Consider
Publish+Share
Computer
AVCHD
with preset M2T - H.264 1920 x 1080i30 or MP4 - H.264 1920 x 1080p30.
The missing ingredients in this include frame rate of the original and frame rate for export. Also NTSC or PAL. I have assumed NTSC for now. Curious about the settings used in Premiere Elements 13 tryout on Windows 7 64 bit that you used for comparison to the Windows 8 64 bit results.
Looking forward to your results.
ATR
Add On...Does your camera allow you to record 1920 x 1080p30?

Adobe Premiere Elements 12 don't start and crashes

Adobe Premiere Elements 12 don't work as it should in Windows 8.
I run the Pc as an Admin Account but still adobe just gives me this message and then crashes.
I only have one account that is Admin on this pc aswell.
I also tried to run the program as "admin" with right mouse buttom, but it's the same error thier.
I have also installed the program on another Pc I dont use but has Win7 and thier it works just fine.
So what should I do so I can use the program that I actually bought serval weeks ago?
But still cant use.... Anyone that know of this problem?
Really bad that you cant write or call adobe "support"

daniel2014
How long ago did you purchase Premiere Elements 12? If it is within the last 30 days, you might be eligible for a free move to version 13. You need to contact Adobe via its Adobe Chat to discuss that as soon as possible if that is something of interest to you. There may be some debate about the way to make contact, but, if you purchased from Adobe direct as an online download, I would contact Adobe Chat by clicking on the following and following through with Chat Panel.
http://helpx.adobe.com/sea/contact.html?step=PRE_membership-account-payment_payments-invoi ces-orders_stillNeedHelp
Premiere Elements
Membership, Account, Payment
Payments, Invoices, Orders
Chat Panel
If the link does not open as set, then you will need to navigate to Chat Panel using the above titles as guides.
If you stay with 12, then there are several areas to pursue
1. Can you open the program by going to the Adobe Premiere Elements.exe file, right clicking it and selecting Run As Administrator, and then double clicking the .exe in an attempt to open the program direct to the editor?
See
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 12
and in the Adobe Premiere Elements 12 Folder are the Adobe Premiere Elements 12.exe and Adobe Premiere Elements.exe. You want the Adobe Premiere Elements.exe file.
2. If you create a new User Account with Administrative Privileges and install and run Premiere Elements 12 from there, does the program open?
3. Does the problem exist with and without the antivirus and firewall(s) disabled?
Let us start here and then decide what next.
Thank you.
ATR

"Adobe Premiere Elements 13 has stopped working"

I got a copy of Premiere Elements 13 on "Black Friday" (one month ago). I am using stabilization and sometimes get "Adobe Premiere Elements 13 has stopped working". I have been guessing at the problem and run several experiments - one being; stabilize a clip in it's own project and create an MP4 to use in the final project. The latest clip seems to render fine, but crashes on playback (sometimes this happened on version 12 but not so consistently and often. I'm running 64 bit Windows 7 Home Premium, with 6GB RAM, 3.30GHz, Intel Core i3 - 4 core processor. I use two monitors with the built-in video hardware. Rendering max's out all four cores while stabilization taxes the RAM. Where can I look to find out more details about this problem (only guessing with anything less)? Thanks for the help.

Ray
Thanks for the reply with further details and results.
The generalization is that you (manually) or the project (automatically) sets the project preset to match the properties of the source media.
But, if you have more than one format to import, you can still import that "atypical" format into the project (a project cannot have more than one project preset). But, the Shake Stabilizer will not stabilize it since it's properties do not match the description of the project preset. You can easily understand this by looking at the description of the project preset that has been set for the project and comparing it with specification of your video source. But, I have not yet found that such a situation creates a project/program "stopped working" as in shutting down the project/program.
I suspect a major factor when you run into a Shake Stabilized induced project/program shutdown is computer resource demands of the feature for the video which is requiring the stabilization. And, I have found that the stabilization times can be long.
Consequently, if the Shake Stabilizer does not cause the project/program to shutdown when asked to stabilize a video clip (without other effects). I am very guarded in the outcome, especially stabilization times, when the Shake Stabilizer is asked to stabilize a video clip to which other effects have already been applied.
We will looking forward to your results.
Thank you.
ATR

Projects settings for AVCHD MTS files in Adobe Premiere Elements 8

Hello,
I have read several discussions already, about importing AVCHD MTS file in Adobe Elements (version 8), but I'm also confused a littlebit, so I would like to confirm if I'm correct.
FYI, I have a Canon Legria HFR26 camera and am using Adobe Premiere Elements 8 (with the latest updates installed).
According to the specs in the Canon instruction manual:
Videos are recorded in high definition using AVCHD specifications
(MPEG-4/H.264 compression).
Audio compression: Dolby Digital 2ch
The camera supports making video's in different format, but I have done it in the default SP format, which results in a resolution of 1440x1080 (50 fields per second, interlaced).
I have copied the video from the camera to my harddisk, and Windows also mentions the video's as AVCHD of 1440x1080 (Bitrate 7672kbps).
The frame rate is 25 frames/second. I assume this is correct for 50i?
So, when I import my video's into Adobe Elements 8, I select the following projects settings:
PAL, AVCHD, HD 1080i 25
Because the description matches my video files:
- For editing with 1440x1080i AVCHD camcorders.
- 16:9 interlaced HD video at 25 frames per second.
- 48kHz audio.
The video's are imported correctly and I can play them. However, as soon as I drop a video on the timeline, Adobe immediately starts background rendering the video (a red line appears on the timeline).
What I understand from some discussions, is that this shouldn't happen, because the video format doesn't match the project settings. On the other hand, I have also read that for Adobe Elements 8 this is normal behaviour and it always start background rendering AVCHD video's.
Is this expected behaviour or should I chance my projects settings or maybe even convert my video files to a different format?
Thanks,
Michiel

The ability to work natively with AVCHD files was not added until version 10, Michiel. So you'll still have to render while you work in version 8.

Adobe Premiere Elements 9 Effects

I have and am using Adobe Premiere Elements 9. I want to use certain effects in my videos, but don't want them there throughout the whole course of the video. I just want them there at certain point's in the video. I am not sure how to do this and cannot find any information on it. How do I do this?

The Keyframe route is the one that I use most often, but some Effects are not Keyframable. In that case, there is an easy way to address the placement of an Effect on just one segment of a Clip.
Say that you have a Clip that runs from 00;00;00;00 to 00;10;00;00, but only want an Effect from 00;05;00;00 to 00;07;00;00 - so it will ONLY be there for 02 minutes. Place the CTI (Current Time Indicator w/ the red Edit Line) at 00;05;00;00, and hit Ctrl-K (or use the Scissors/Razor Tool) to Cut that Clip. Now, move the CTI to 00;07;00;00, and repeat. one now has a 02 min. Clip created from that "master Clip." Apply the Effect to that 02 min. segment (let's call it a Sub-Clip for this discussion, but there are other meanings for the term Sub-Clip.) Since this Effect was one that we could not Keyframe (in our example), right now, one would jump from having no Effect to having the full Effect. Might be OK, but probably not. Just add a Cross-Dissolve where you made those Cuts, and the Effect will Dissolve in, then Dissolve out.
Good luck, and where possible, do use the Keyframes, as they offer so much more control - just remember that that will not always be possible. The above method is sort of the "poor-man's Keyframing."
Hunt

Can't start Adobe Premiere Elements 13 video editor.

It says: "Adobe Premiere Elements 13 has stopped working" without additional details. It doesn't close, it is not frozen, but it does not work.
I tried Adobe Premiere Elements 12 (trial version) which had no problem at all on my PC. I'm using the 64 bit version on Windows 7. I've tried to re-start the pc, to uninstall PRE 12, but this does not work. I have access to the Organizer though. Has anyone manages to get PRE 13 installed?

chti_gaby
Thanks for your follow ups.
Let us focus on Premiere Elements 13 Windows 7 64 bit computer.
Let go through the usual drill questions...
a. Does problem exist with and without the antivirus and firewall(s) disabled? Is your antivirus program McAfee?
b. Are you running the program from a User Account with Administrative Privileges and have also selected and applied Run
As Administrator to the desktop icon of the program?
c. Do you have the latest version of QuickTime installed on your computer.
d. Can you open the program using the Adobe Premiere Elements.exe file instead of the Adobe Premiere Elements 13.exe?
See Local Disk C\Program Files\Adobe\Adobe Premiere Elements 13\
Please consider
a. Go to Control Panel/Programs and assure that Adobe Premiere Elements 12 and 13 are not showing as installed programs.
If they are, uninstall.
b. Do a free ccleaner run through (regular and registry parts) to get rid of any leftovers from incomplete installs or uninstalls.
https://www.piriform.com/ccleaner/download
c. Reinstall Premiere Elements 13 with antivirus and firewall(s) disabled.
The following is what was helpful for me when I ran into problems with Photoshop Elements 12 and Premiere Elements 12 installs.
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
Depending on how the troubleshooting is progressing, you may want to consider exploring these possibilities.
We could get into video card/graphics card, etc, but your comments on your initial experience with the Premiere Elements 12 tryout
make me hesitate on exploring that aspect of the troubleshooting now.
Please review the above and then we can decide on the next course of action.
Contacting Adobe via its Adobe Chat is a possibility since you have a purchased version of the current version (13), but let us see
what we can do.
Thanks.
ATR

Do I need to uninstall pinnacle studio before installing adobe premiere elements 12

I'm thinking of changing from Pinnacle Studio and switch to adobe premiere elements 12, but want to try adobe. Do I have to uninstall Pinnacle, or can both programs exist together?

you do not need to uninstall pinnacle studio before installing premiere elements.

Need to download Adobe Premiere Elements 8 replacement

I purchased this product several years ago, but my computer can no longer find it. I cant find a way to contact to contact Adobe directly, and I am not sure which serial number I have is correct.

drawdalf
What computer operating system was your Premiere Elements 8 running on?
For now I will assume Windows 7, 8, or 8.1 64 bit?
If you go to Control Panel/Programs is your program listed there as an installed program? If not, that does not ALWAYS
mean that it is not installed. So, please follow the path...
Local Disk C
Program Files (x86)
Adobe
Adobe Premiere Elements 8.0
and, in the Adobe Premiere Elements 8.0 Folder, look for two files
a. Adobe Premiere Elements 8.0.exe (double clicking this one should open the program to the Welcome Screen)
and
b. Adobe Premiere Elements.exe (double clicking this one should open the program, bypassing the Welcome Screen)
Can you open the program from either of these files? If so, you can create desktop icons for these files by right clicking the file,
selection Send to, followed by Desktop (Create Shortcut).
Please confirm the above information.
Your serial number should be at Adobe http:/www.adobe.com. And, when signed in there, you should be able to go to "My Products" and
find the same of your product and its serial number (by clicking on the product name). To get new download files if the original purchased
was from Adobe, then Adobe http://www.adobe.come. And, when signed in there, you should be able to go to "My Orders" for
download of the new files.
You can contact Adobe via Adobe Chat about this matter via the following link
Contact Customer Care
Thank you.
ATR

Adobe Premiere Elements 9 has encountered a problem and needs to close.

Adobe Premiere Elements 9 has encountered a problem and needs to close. Asked to be debugged no response an then the program don not respond.
If i Run an old project direct from the file PE 9 it works and then go to a new project it works but from the start up it just closes down.
Bridge is also starting to do it

From the Premiere Elements Information FAQ http://forums.adobe.com/thread/1042180
•What version of Premiere Elements? Include the minor version number (e.g., Premiere Elements 12 with the 12.0.1 update).
•What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac"
•Has this ever worked before? If so, do you recall any changes you made to Premiere Elements, such as adding Plug-ins, brushes, etc.? Did you make any changes to your system, such as updating hardware, printers or drivers; or installing/uninstalling any programs?
•Are you using an account with Administrator Privileges?
Run as Administrator http://forums.adobe.com/thread/969395 (Encore + "All" Premiere)
•Have you installed any recent program or OS updates? (If not, you should. They fix a lot of problems.)
•What kind(s) of image file(s)? When talking about camera raw files, include the model of camera.
•If you are getting error message(s), what is the full text of the error message(s)?
•What were you doing when the problem occurred?
•What other software are you running?
•Tell us about your computer hardware. How much RAM is installed? How much free space is on your system (C:) drive?
And some other questions...
•What are you editing, and does your video have a red line over it BEFORE you do any work?
•Which version of Quicktime do you have installed?
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning

I am trying to use my adobe premiere elements 12 and when I go to click on a "new project" it takes me to the sign in page. Once I type my information in and click on "sign in" a little 'thinking circle' pops up and it just keeps spinning but it never ends up doing anything. Please help me with this issue. I really need to get this project started like yesterday. Thank you.

dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR

Adobe Premiere Elements 7.0 hangs while exporting and during peak file generation.

I have Adobe Premiere Elements 7.0 (PRE7). I have a project which is using a single clip from a Mini-DV that was captured with Nero 8. Nero 8 was used because it was captured prior to installing PRE7. The file is 12GB and is on a USB disk drive because I don't have the space on my main hard drive (I have about 11GB free). My project doesn't do too much that's fancy. It merely uses about 20 minutes of the 60 minute Mini-DV captured AVI, and it uses simple transitions between each scene. I also have very simple titles at start and end. No themes or anything else.
I've seen two problems. 1) While editing the project, seemingly (but I'm not positive it's related) while the peek file was being generated, PRE7 would get into a state of using about 40% to 50% CPU, and it would not let me do anything else. The other problem, 2) While using "Share" to export the video to WMA for playback on PC (about 180MB estimated file size according to Adobe), the file is exported to about the last remaining 5 seconds, but then PRE7 goes into that mode of hanging with 40% to 50% CPU usage.
One time when it had this 50% CPU issue, I let it sit overnight, and the export was finished in the morning. The export that time was to a 90MB FLV for posting to the "web" according to the Share wizard. But when I was doing the above (issue #2), it went into the 50% CPU usage but didn't finish after waiting around 2 hours. Even if I were to let it sit that time, and it were to finish, it seems like something's wrong and that this is unacceptable.
When this happens, and PRE7 goes into 50% CPU utilization, there is no pacifier or percentage bar advancing. It usually happens near 100% finished. Only one time did it complete successfully after leaving it unattended at 90% complete for an extraordinary amount of time.
To recap:
C:\ hard drive ---> PRE7, my project.
E:\ USB drive ---> 12GB source AVI file and destination for export.
I saw elsewhere on this forum that someone imported a mini-dv captured AVI into Window Movie Maker and then exported it to Mini-DV from that app. This solved that person's problem with hanging during peak file creation. I had the 50% hang issue during peak file generation but I'm not sure it was related to peak file generation. A peak file was generated in a project which, when exported with share as mentioned above, still did the hang 50% CPU issue. Regardless, I will try the import/export/movemaker thing and report back but I've been trying enough things that I wanted to take a second to ask for assistance.
Does anyone have this issue, and is there a patch or fix?
I might be able to provide a user mode dump of the 50% CPU adobe process. There is some call stack information and I'm wondering if developers would want this info if they don't already have a solution/fix to this bug.
Thanks for any help.

I have some more info on the hang which I've been experiencing during export/share of a project which uses an AVI as its one main clip. Adobe Premiere Elements 7 (PRE7) appears to be hanging because it's looping endlessly in ImporterAVI.prm. I'm wondering if this info can be passed onto Adobe developers and/or if I can submit this information elsewhere for such processing. I also have a process dump file which might be helpful, not to mention the original project files.
I used Process Monitor to help analyze this situation, and prior to PRE7 getting into the endless loop, it appears to be reading from the AVI file little by little, and WMEncodingHelper.exe is writing out little by little to the destination file, both of which I would expect. When PRE7 gets to the end of the import/export, Process Monitor appears to show all the aforementioned disk activity ceasing. I see neither process reading or writing. This would be normal if the share/export procedure had completed. But PRE7 is not complete. It is hung and is operating at 50% CPU utilization.
Far below in this post are technical details which may be helpful to an Adobe developer determine why the importer could get into this endless loop. In those details, there is a jump instruction, "jb ImporterAVI!xImportEntry+0xf32", which will always jump if a particular compare always turns out a certain way. But in my review of the counters being compared, it never will get to a point of exiting. When I modify a flag (the carry flag) to be 0, the loop exits. When I did this, my export/share of my project completed successfully. So it was done, but for some reason, PRE7 was looping and looping in its AVI importor instead of completing the export (aka "Share").
I cannot say that this certainly indicates a bug with PRE7, but it seems to me that there's enough data for Adobe to be at least investigating this particular issue. I'm not the only person who has seen this as there was at least one other message describing the same problem which the user resolved by effectively re-creating the AVI file via a no-op import/export into and out of MovieMaker. My AVI also goes through MovieMaker, import/export, without a hitch.
In a sense, I view PRE7's "share" as essentially an import, processing of imported information (i.e., effects and transitions), and an export. It's an import of all clips into the project at the right times, a processing of all effects, and finally an export to a destination. I realize this is simplistic, but the point I'm making is I have a simple project with a single AVI, and it appears that the "import" portion of PRE7's Share option is choking on the only clip used by this project. I also don't have much but simple transitions and a beginning/ending title on the project, so I'm not thinking this use of PRE7 is much more than what I'm doing with MovieMaker when importing/exporting this AVI.
I fully agree that optimum hardware can be either required or critical for certain types of video editing, but PRE7 is a consumer program and I'm not using anything extensive about it and the symptoms are that PRE7 is looping on its import of a file other programs don't have a problem with. I already tried purchasing a 1TB external, which I'm glad I did, but I really think Adobe developers should look at this issue. There may be a problem with handling certain AVI clips used in a project when those clips come from certain sources. If there is an issue, perhaps it could warrant a fix that would make PRE7 more compatible with these other clips.
Does Adobe have a procedure for people to upload (or mail) projects and files to it so that they can troubleshoot why the importer gets into this state? I also mentioned earlier that I have a full user-mode dump of the process which may be of value to a dev. Can I submit this information anywhere?
Here are textual technical details:
Plug-in which loops: C:\Program Files\Adobe\Adobe Premiere Elements 7.0\Plug-ins\en_US\ImporterAVI.prm
The following are the instructions at the "bottom" of the loop which never ends. Below, I put "***" at the jump instruction I mentioned earler. If I force the carry flag to be 0 at that point, and the jump is skipped, the export completed successfully. Additionally, notice that [esp-0x1c] is 0x2000, and that both eax and edi are 0. When I see it loop, eax stays at 0 and never reaches 0x2000. I wonder if something about the AVI is causing values used by this importer to be such that it causes this endless loop, and if that's the case, and if such values are valid/good, I'm wondering if the importer can be fixed by being able to detect such values so as to not choke (if in fact it's an importer issue).
1239dda2 50 push eax
1239dda3 ffd1 call ecx
1239dda5 8b442424 mov eax,dword ptr [esp+24h]
1239dda9 015c2428 add dword ptr [esp+28h],ebx
1239ddad 03c7 add eax,edi
1239ddaf 83c410 add esp,10h
1239ddb2 3b44241c cmp eax,dword ptr [esp+1Ch]
1239ddb6 89442414 mov dword ptr [esp+14h],eax
; *** This is where it loops around and around.
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2)
ImporterAVI!xImportEntry+0x1040:
1239ddc0 8b542420 mov edx,dword ptr [esp+20h]
1239ddc4 52 push edx
1239ddc5 e810d40000 call ImporterAVI!xImportEntry+0xe45a (123ab1da)
1239ddca 83c404 add esp,4
ImporterAVI!xImportEntry+0x104d:
1239ddcd 5f pop edi
1239ddce 5e pop esi
1239ddcf 5d pop ebp
1239ddd0 33c0 xor eax,eax
1239ddd2 5b pop ebx
1239ddd3 83c428 add esp,28h
1239ddd6 c3 ret
ChildEBP RetAddr Args to Child
WARNING: Stack unwind information not available. Following frames may be wrong.
3195d9b8 12387545 10590f9c 27c53e00 06b35ff6 ImporterAVI!xImportEntry+0x103a
3195d9ec 1239ea10 06b35ff6 00000000 27ad8a60 ImporterAVI+0x7545
3195da1c 1238aa31 06b3554b 00000000 7fdf0000 ImporterAVI!xImportEntry+0x1c90
00000000 00000000 00000000 00000000 00000000 ImporterAVI+0xaa31
[esp-1Ch]: 3195d9a0 00002000
eax=00000000 ebx=00000000 ecx=3195dbcc edx=00000000 esi=27ad8a60 edi=00000000
eip=1239ddba esp=3195d984 ebp=3c7ba50b iopl=0 nv up ei ng nz na pe cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000287
ImporterAVI!xImportEntry+0x103a:
1239ddba 0f82f2feffff jb ImporterAVI!xImportEntry+0xf32 (1239dcb2) [br=1]

Adobe Premiere Elements 11 and AAMEE on Mac

I am trying to distribute Adobe Premiere Elements 11 serialized on a Mac and when I attempt to do this via AAMEE 3.1.X, I receive a message that the media is not recognized. Can Adobe Premiere Elements 11 be distributed in this fashion?
Thanks

Yes, you can package PSE/PRE 11 using AAMEE but not 3.1 version. You need to use AAMEE 2.1 to do so. Check the below link, it should give what you need here.
http://helpx.adobe.com/photoshop-elements/kb/silent-install-instructions-photoshop-element s.html

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

By the today e-received updates for Adobe Photoshop Elemenst 12.1 and Adobe Premiere Elements 12.1 I got this error messages: Failure code = U44M1P2003. What to do? System = Window7 64bit.

Sometimes the Adobe servers used for the updates can get busy and it’s necessary to try a couple of times. Also make sure you don’t have a firewall which may be blocking the connection. It sometimes helps to temporarily disable internet security/anti-virus software. Because the Organizer is shared by both programs it often helps to do the PSE update first, followed by the PRE update in that order.
Select the 12.1 update for PSE from the updater dialog and ensure everything else is unchecked. Quit PSE and PRE if you have it running and then start the update.
If PSE updates properly to 12.1 repeat the process for PRE.

Crop and Mask in Adobe Premiere Elements 11

Similar Messages

Maybe you are looking for