Cross-client customizing are not permitted

Hi,
I am trying to remove "Transformation Object" in BI 7.0, QA server, and it not allowe to me access, I have SAP_ALL access
I am getting this error messages:
"changes to repository or cross-client customizing are not permitted"
I know we can't change anyitng in QA its goes through Transport, but the problem is DEV system this objects didn't show and QA this objects shows, so I want to remove this bi object from QA system
I know while installation NW 2004s its post installation steps to not change objects
in SE06 I am trying to change these objects to modifible but still not allow to changeable
please help me out

Hi Angeline,
In transaction SCC4 double click the client on which you are working. There will be a setting "Changes to repository or cross-client customizing are not permitted." Modify this option to "Automatic recording of changes."
Making that will allow you to delete the object.
Make sure after you achieve your desired objective, you revert back the client settings to "Changes to repository or cross-client customizing are not permitted." Also revert back the settings in SE06 in QA to the original what you had in post installation.
Regards
Sourabh Majumdar

Similar Messages

  • SPDD "Changes to Repository or cross-client Customizing are not permitted"

    Hi All,
    While adjusting the std. ddic objects during upgrade from 4.6c to ECC 6 thru <b>SPDD</b>, I am getting the error message saying <b>"Changes to Repository or cross-client Customizing are not permitted"   Choose 'Display object' or 'Cancel'.</b> I am making these changes in te <b>Customizing 000 client</b>
    What could be the reason for this?
    Helpful and timely answers will be gratefully rewarded!
    Regards,
    Karthik.

    Hi
    I think there are some settings with radiobuttons in some Basis transaction where we can adjust this, basis person knows about it
    see the links reg SPDD
    SPDD - http://help.sap.com/saphelp_erp2005/helpdata/en/2e/6d66587d9011d396b60000e82de14a/frameset.htm
    SPAU and SPDD
    http://www.sap-img.com/bc018.htm
    Please refer the link,
    Transaccion SPDD and SPAU
    explaination of SPDD
    Transaccion SPDD and SPAU
    about spau & spdd
    explaination of SPDD
    Transaccion SPDD and SPAU
    about spau & spdd
    Regards
    Anji

  • Error Changes to Repository or cross-client Customizing are not permitted

    Hi
    While creating infoset in SQ02 it is giving an error as "Changes to Repository or cross-client Customizing are not permitted"
    I did change the SE06 system change options , software components modifiable.
    And I also changed the objects changebility in transport connections in RSA1. But still it is giving the same error.....
    Can you please let me know the solution?
    Thanks

    I'm assuming that you're creating a custom InfoCube query, so does it give you the option of creating as a Local Object (package $TMP) or one of your custom, transportable packages? Basically it's determining whether you want this InfoSet Query to be a Local Object or if you plan on transporting it throughout the landscape.
    One other thing that I wanted to point out about security. SAP_ALL doesn't necessarily mean access to anything and everything. There are cases where the Authorizations assigned to an SAP_ALL Authorization Object don't necessarily have all of the correct assigned Activity for every transaction. Security, in your case, doesn't seem to be the problem because you're getting this request to assign a package.
    Edited by: Dennis Scoville on Nov 4, 2009 2:39 PM

  • Changes to Repository or cross-client Customizing are not permitted

    Hi All,
    Transaction OB52 is a transportable activity, therefore we created maintenance view of table T001 which user can maintain in QAS and PRD servers.
    In similar fashion, we created maintenance view of customized table, but on modifying it in QAS, prompts the subject error.
    Any particular reason of why it is not appearing for the first maintenance view and why is it prompting to second maintenance view only.
    I checked SCC4 and SE06 and found everything "Not modifiable"
    Please advise.

    This is the general manner of QAS and PRO client settings, Contact your BASIS admin to get more clarification on this.
    And normally you have to make the changes in OB52 in DEv and transport to QAS and PRO, why you are trying to use this in dif mode?
    Regards,
    Nick Loy

  • 'Changes to reposotory or cross client custimizing is not permitted'.

    Hi,
    I am trying to activate datasources at r/3 side.
    I am getting message that 'Changes to reposotory or cross client custimizing is not permitted'.
    I cant understand that why this is happening.
    I feel that it is because of cleint is lock or not changeable.
    So how to check that client is locked. OR how to resolve this problem.

    Hi,
    If you are trying to do this in R/3 production system, obviously you will get this messaage because most production systems are locked and no customization or chagnes are allowed. If you are getting this message in R/3 development system then you need to change the settings to allow customization. Use Transaction code SCC4, click on the pencil, click on continue, double click on the appropriate client, choose second option in changes and transports for client-specific objects. Now choose "Changes to reporsitory andd cross-client customizing allowed" from the first drop down list and save it.
    Hope it will help.
    Regards,
    Rao.

  • Field exit showing---not allowed to change cross client customizing

    hi all ,
    when im trying to activate field exit . Its showing---not allowed to change cross client customizing.
    how to correct that.
    thanks in advance.
    sg

    hi SG,
       first and foremost thing while using field exit is, ask your basis person to include the parameter abap/fieldexit = Y in your instance profile.
    Otherwise u can't use the field exits.
    Regards....
    Arun.
    Reward points if useful.

  • Error: Reason codes with automatic charge-off are not permitted here(F-28)

    Hi All
    I creted a reason code in obxl t-code and assigned a gl code in OBXL transaction code, But when I am trying to clear a payment with reason code in F-28, System is throwing the following error..Can some one tell me why i am getting this error?
    Reason codes with automatic charge-off are not permitted here
    Message no. F5605
    Diagnosis
    The reason code entered is designed to ensure that the payment difference amount is posted to an account specially set up for this purpose.  Postings of this nature usually require additional specifications (e.g. tax code, business area). If the difference stems from a single open item, the necessary specifications can be taken from that item. In the case that led to this error message, however, the difference does not stem soley from one item, which means that this method cannot be used.
    System Response
    The reason code entered is not accepted.
    Procedure
    You can either select a different reason code, which would create a new open item for the customer or vendor OR write off the difference using the function Charge off diff.. This function either takes you into a pre-configured account assignment model or into the document overview. From here you can enter the required difference postings.

    Hi Venkata,
    It seems while entering the payment (partial payment / residual items) ... you are clearing multiple items with differences. (e.g. if the difference amount is $30, then may the difference consists of two invoices underpaid by $15 each). In this scenario, F-28 doesn't know which additional account assignment fields should be picked up ... hence the error.
    First of all, to validate that this indeed is the case, try clearing a payment with the same reason code where difference can be attributed to a single invoice. If you still get an error, then there is some other problem.
    Then, to take care of a the business scenario where the difference can indeed be due to multiple documents, select "charge off difference" option and create an entry to post the difference as necessary.
    HTH,
    Manish Patel
    Sr. SAP Solutions Consultant

  • Postings to G/L accounts with open item management are not permitted in ASKB

    Hi Gurus,
    I have the error FAGL_POST_SERVICE012 'Postings to G/L accounts with open item management are not permitted' when i run the transaction ASKB. The very strange thing is that in table APERB_ITEMS for this company code there isn't any record. My questions are:
    1. The ASKB posts only if the APERB_ITEMS is populated?
    2. If yes, Why the ASKB wants to create postings on this company code?
    3. If no, which are the logic  conditions that include a asset in the ASKB execution?
    4. If the logic is correct, how i can to run the ASKB on OI accounts?
    Thanks in advance,
    Best Regards,
    Emanuele

    Hi ,
    I believe you know why do you run transaction code ASKB if not please see below
    The report evaluates all asset transactions since the last run. Unlike the periodic depreciation posting program, the APC posting run is not tied to a certain accounting period. It generates one document per posting period and depreciation area. That means that asset values are summarized for various account groups in one document. Document number assignment is external. You have to enter the document type in Customizing for Asset Accounting.
    There are various possible ways of posting APC values:
    To an account set within the original company code
    To an account set of an alternative company code
    To an account set directly in a special ledger
    The account set can be determined from a different depreciation area.
    Derived depreciation areas can be treated as real depreciation areas. This means that the system posts APC differences rather than special reserves, as was the case up to now.
    During a test run, the system completes all accounting checks (for example, budgetary control of objects belonging to Funds Management).
    While doing above system reads and update table APERB_ITEMS . If you look to Program for ASKB is RAPERB2000  and if you take your ABAper help to under the coding he will tell you  that is program use APERB_ITEMS to update  and read.
    MANY THANKS
    REGARDS
    Preeti Agarwal

  • Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

    Hi Guys,
    I am facing very critical issue on down Payment request, to process with saperate Tax Value.
    We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
    As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
    Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
    For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
    We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
    We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
    I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
    Below is the error message:
    Down pmnts with taxes are not permitted when processing with jur.code
    Message no. FS206

    HI Preeti,
    Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
    However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
    Did any one seen this case in your experiece, if yes, what is the work-around solution?.
    Need your help guys!,...
    Regards,
    Damodar Naidu

  • Proxy calls are not permitted on IS

    Hello,
    I have implemented a  scenerio between SAP AR -
    XI --- SAP FCSM.
    Now SAP and Xi are on same server but clients are different.
    For SAP client is 110 for XI client is 100.
    In sxmb_adm we have set SAP as application server and Xi as IS.
    While testing this secerio i got a error as Proxy calls are not permitted on sender or receiver side on the IS (client)
    If i check in sxmb_moni i found 2 messages one is sucessful and other one with error shown above.
    can anyone help me out in this.
    regards,
    Vikrant

    Hi Vikrant,
    Need to be configure the Business Systems as the Local Integration Engine
    In the respective application client, choose Exchange Infrastructure -> Administration -> Integration Engine u2013 Administration (SXMB_ADM) in the user menu.
    2.Choose Integration Engine Configuration.
    3. In the menu bar, choose Edit -> Change Global Configuration Data.
    4.In the Global Configuration Data frame, choose Application System as the role of the business system.
    5.In the Corresponding Integ. Server field, specify the HTTP destination that the business system uses to address the central Integration Server. Use the following syntax: dest://<HTTP Destination>
    Specify the HTTP destination of the Integration Server that you created during the technical configuration of SAP Exchange Infrastructure.
    regards
    Ashwin
    Edited by: ashwin dhakne on Mar 6, 2009 5:26 PM

  • List of SAP cross client customizing settings/transactions

    Hi All,
    Is there a list of SAP cross client customizing settings/transactions that are allowed by SAP to directly modify in production, covered under Audit compliance?
    Regards,
    XIer
    Edited by: XIer on Jul 10, 2009 1:44 PM

    Hi All,
    Is there a list of SAP cross client customizing settings/transactions that are allowed by SAP to directly modify in production, covered under Audit compliance?
    Regards,
    XIer
    Edited by: XIer on Jul 10, 2009 1:44 PM

  • Postings to G/L accounts with open item management are not permitted Messag

    HI All,
    Me activiated New GL. and when I am trying to post the
    document, I am getting the below error.
    The GL used 200100 is Cash A/c (40)
    Cr Eq Share Capital A/c (50)
    As Cash A/c requires Clearing, I have activated "Open Item Management".
    Can you advice me why Its giving me the below mentioned error.
    Thanks
    Postings to G/L accounts with open item management are not permitted
    Message no. FAGL_POST_SERVICE012
    Diagnosis
    You use G/L account 200100 in company code RLIF with open item
    management. However, postings are not permitted to G/L accounts in
    individual ledgers with open item management.
    Procedure
    If you have not yet made any postings to this account and if the
    account is to be used for closing processes in non-leading ledgers,
    deactivate the Open Item Management indicator in the company code data
    for the G/L account.
    Thanks,
    Niranjan Yandamuri

    Hi,
    Please, refer to note 1646466 for the info on this message.
    Regards,
    Eli

  • Decimal Places are not Permitted for Chile Country

    Hi All,
    In OVA8 settings for Chile country at the field max.doc value, i am not able to use the decimals. getting error message as Decimlas are not permitted (Message no - 00011). checked OY04 - there is no decimals for Chile currency. checked - OY01 Dec.Pt. format as 1.234.567,89
    For Argentina, Peru and Uruguay same settings has been done and i am able to save the decimal points in OVA8 at the field max.doc value.
    Please let me know if there is any specifis settings for Chile or SAP NOTE
    Thanks,
    Mahesh

    HI,
    just looking at a brand-new ECC60 / EhP4 system where nobody changed OY04 settings.
    I can find CLP (Chilean Peso) in the list with ' ' decimal places, so thats why there are no decimal places allowed.
    Check again OY04, if you find an entry for CLP and NOTHING is maintained it means that ZERO dec. places are allowed.
    If you find an entry in OY04 with a number of decimal places >0 than this decimal places are allowed.
    If there is NO entry for a given currency then its used with 2 decimal places (SAP standard).
    So OY04 is only for the currencies that should be treated different as SAP standard.
    Best regards, Christian
    Edited by: Christian Ortner on Feb 3, 2011 5:09 PM

  • Postings to G/L accounts with open item management are not permitted

    Dear all,
    i am getting one error FB01L ledger specific posting  for ledger group L2 ledger (IFRS) error is "postingst o GL accounts with open item management are not permitted " i am posting both gl accounts  are balance sheet  account, please help me how to resolve the problem .
    Message no. FAGL_POST_SERVICE012
    Reregards
    rajashekhar

    Dear all,
    Thanks for reply, The error message appears FAGL_POST_SERVICE012 because it is generally not permitted to use the O/I managed account as an adjustment account.It is not possible to post on Individual Ledger (on a Leading or non-leading) on OI Account. This is for your informations
    We want to post ledger specific for L2 ledger  i am getting above error can help me how to sovle the problem , otherwise any alternaitve solution for posting  L2 Ledger

  • Posting to gl a/c with open item management are not permitted.

    hello,
    When i run FAGL_FC_VAL it display the report and generate the batch input session.
    But when i run the session the error massage appear -
                "posting to gl a/c with open item management are not permitted."
    When i post the same gl mannually, it doesn't show any error.
    The Same Problem appear when i run the session generated from FAGLF101- the regrouping program.
    Can any body give some idea, what should be done.
    Thanx
    Subodh

    Hello this is chandu,
    When u run the fc val it posts the ex gain or loss to  respective a/cs.Means those a/cs are not B/S a/cs.Only B/S a/cs we select open item management which r require to maintain on OI management basis.
    So try to maintain other a/cs for ex gain and loss y bcoz once u post any transaction in those a/cs which r created already on O Item mgnt basis u cannot change that again.
    Then assign those a/cs to automatic postings and run the rc val again
    May it will be useful to u
    Thank u

Maybe you are looking for