Cross device link error again

Hi all,
I have the same problem as: Error 22: Cross-device link while creating DB
when I try to open a berkeley db. I´m really sure that I´m not dealing with more than one disk/device/etc.
And as is specified in the link above I´m sure that the path is ok and I´ve tried
with the full path to the archive too. I get always the same error "Cross-device link".
Anyone can help me??
Thank you very much!

Sorry, If I have posted this thread it´s because the solution given to the same problem I did not solution my problem.
I forgot to tell you the line where I get the problem:
res=db.open(NULL,"C:\\mydb.db",NULL,DB_BTREE,DB_RDONLY,0);
After this line, res takes the value 22. I've tried with all the combinations of slash ('/', '//', '\' and '\\'), and If I try to open a file that doesn´t exist, I get the same erro (res=22).
Another thing I tried is not to open, but to create the db, (flag DB_CREATE) but I get the same problem again.
I'm trying to use Berkeley db from an application developed on Borland C++ Builder in windows XP.
What can I do?
Thank you very much for your help

Similar Messages

"Invalid cross-device link" when building with archiso

I'm trying to build a custom Arch bootable disk using archiso. In the final steps I get a long list of cp errors as such:
cp: cannot create hard link ‘work/root-image/root/.zshrc’ to ‘work/i686/root-image/root/.zshrc’: Invalid cross-device link
I'm invoking build.sh in ~/archdiag as root after copying the files from /usr/share/archiso/configs/releng/.
All I've found via search is a reference to creating hard links between partitions. This is all being performed in ~/archdiag on a btrfs subvolume containing my /home folder.
My packages in packages.both are currently almost completely vanilla. Only things added are kdebase and pulseaudio.
Why is this failing?

Sorry, If I have posted this thread it´s because the solution given to the same problem I did not solution my problem.
I forgot to tell you the line where I get the problem:
res=db.open(NULL,"C:\\mydb.db",NULL,DB_BTREE,DB_RDONLY,0);
After this line, res takes the value 22. I've tried with all the combinations of slash ('/', '//', '\' and '\\'), and If I try to open a file that doesn´t exist, I get the same erro (res=22).
Another thing I tried is not to open, but to create the db, (flag DB_CREATE) but I get the same problem again.
I'm trying to use Berkeley db from an application developed on Borland C++ Builder in windows XP.
What can I do?
Thank you very much for your help

LKM Oracle to Oracle DB link - Error ( Jan 5 2009)

Hi ,
My Source and Target databases are Oracle..._
Since my Source has around *2 million records*.....it is taking too much of time in Load Data step....
Intially I was using LKM SQL to Oracle and IKM Oracle Increemental Update...
Looked in to ODI docs and FOrums...it seems LKM Oracle to ORacle (DB Link) would be the fastet way to load the data in target.....
I have a Dblink created between my source and target.... i tested with the SQL it looks fine.............
I created the Topology by mentioning the DBlink name ....
And I straight away ran my interface ......
I am getting this Error:
schema1 is my target schema name.....
When I am using a different LKM it works fine , takes time a lot .....
1917 : 42000 : java.sql.SQLException: ORA-01917: user or role 'schema1' does not exist
java.sql.SQLException: ORA-01917: user or role 'schema1' does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
How can i proceed in this scenario..?
Thanks in advance
Ananda
Edited by: Ananda on Dec 22, 2008 5:15 PM
Edited by: Ananda on Jan 5, 2009 8:54 PM

Hi ,
I am getting the Same DB link ~Error again. I have granted all the access to the particular schema.
In the first step itself Interface getting failed...!!!!
Step 1. Create view view on source.
When I run an SQL query using DB link , DB link work fine. ( I had a doubt whether the DB link is an issue )
Any advice on this !!
Thanks
Ananda

Dynamic link error message again?

Hi
I am running Bridge CS6, somethimes with photoshop CS6.
I am running mac OSX.6.8 (snow leopard).
mac book pro
I am getting the dynamic link error message again after not having the problem since CS6beta. It sometimes is only with mov or other movie files but sometimes it is with all. It is also very slow and sluggish in general.
When I click on a video files Bridge spins the wheel for a whlie and then gives me the below error message
(in case the screen shot does not load)
The error message reads
"dynamiclinkserver has encountered an error"
and then it reads off a file thread. and then I must click to continue
I click to contiue. the message comes back. I click once more and the file then presents. I click to play the vid. the error message again comes back. And I must repeat the clicking twice. I have reset the preferences and purged the cashe. I have installed the patch I found in the forum too. thanks for any help you can render, Uhane

Yes I did that while talking to tech support on the phone. They had given up and refered me to an upper tech support staff who was supposed to call me back but never did. Where is a link to this udate? It did not show up when I ran the updater.?! As for permission listed as a culprit on the other thread you link to I have no such firewall or other software running. All the permissions have been set to my admin accnt which is the one and only accnt on this machine. I had NO problem since the beta version and then all of sudden it started again with the dynamic link fail with somoe files types in the last day or so. As for the other problems ... I honestly don't have a clue but assume they are all related to a single cause as they all showed up at the same time. I will reset once more. All start up scripts are checked. always have been. Can you tell me more about this update?? Is there a link? I will go fish...thanks for your help

HT1212 I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.What should i do ? Somebod

I do the same that is instructed in "If you have never synced your device with iTunes ".Everything works fine and itunes start restoring it and updating my ipad.But after 5 mints , same error again appears on itune screen.And also ipad goes into same disabled postion.What should i do ? Somebody help please.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Some users have reported as many as 8 or 9 attempts were necessary before success.
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work.

Sibling Link Errors

i recently purchased the Mac Pro which i connected through ethernet to my older Power Mac G4 MDD Dual 1GHZ.
i discovered last week that my Mac Pro reported an error in Disk Utility "Invalid Sibling Link" and that app could not repair the problem. i purchased Disk Warrior 4.0 and installed OS X on another internal drive (i have four connected internally) and successfully repaired the disk. On a lark, i checked the Power Mac G4 and found that it also reported errors which could not be repaired by Disk Utility, but it did not report the "Invalid Sibling Link Error." Disk Warrior failed to repair the disk (and i am waiting for the CD to arrive in the mail to start up from it to try again, reporting that it encountered two overlapped filed on the disk).
This week i ran Disk Utility to find that again, my Mac Pro reported the "Invalid Sibling Link" error. i have searched the web and have a basic understanding of what the error is, and many people have experienced the problem. It appears that the error could lead to the start up disk failing to mount, etc. However, i have not experienced any problems with my drive that have been noticeable to me.
My question is what could be causing me to have this repeated error? Does this indicate an actual hard drive failure? Is there a Mac virus that could cause this? Could it be caused by transfering files over the network or through Apple Remote Desktop?
Any discussion on this would be helpful. Thanks folks.
MacPro Dual-Core 3 Ghz Mac OS X (10.4.9) ATi X1900 XT, NVIDIA GeForce 7300, 5GB RAM, 2.8TB, 20" DEll LCD, 2xViewSonic 17"

Which drive gets the error out of all installed, and
where is it located as far as file name etc. I'm
wondering if it could happen using an application
like FCP or CS2 running under Rosetta. Might want to
map it out and try and isolate it that way. I'd also
look for any hardware issues you can find for that
model of hard drive e.g. failures, etc. My two
cents.
Michael
It is the Startup Drive that gets the error on my Mac Pro (the preinstalled drive that came with the Mac), and the start up drive on the MDD G4. The MDD G4 had two files that were cross linked (a Civ file and an iTunes Temp file) that i had to manually delete before Disk Warrior could repair the drive. On the Mac Pro i have used Photoshop CS (1?) a little, but not to any large degree, other than that, i have used Apple's Pages, Safari, and Office... but nothing task intensive.
i ran Apple's Hardware test which appears to check RAM and the Logic Board and both checked out fine. i used both Disk Warrior and Drive Genius, both report that the S.M.A.R.T. status of the drive is verified and the drive is working properly.
i am curious if Apple Remote Desktop could cause the error? i frequently copy files from one computer to the other... but i can't fathom why or how this would be the case. But it has to be something, else why get this error twice in the space of a week?
i had not considered Tiger Cache Cleaner... i will check that out, but again, i don't know if this will tell me WHAT is going on and WHY it is happening.

New device want to update device linked to blackberry ID

I got a new blackberry want to update device linked to blackberry ID
how do I go about this?

Thank you, that helps me sort through the thousands of possibilities and find things that may apply to your situation.
dboland99 wrote:
"Blackberry app world is having trouble connecting to the Blackberry app world server. verify your network connections and try again"
KB29490 The error message "BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again." occur when attempting to log into App World
KB20031"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again" appears when BlackBerry App World is started
KB28188"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again. (Error id: 40820) " error is displayed when opening App World on the BlackBerry smartphone
dboland99 wrote:
App world Online connecting bold through usb:
App World Web Plugin Error
An error has occurred communicating with the BlackBerry App World Web plugin. Please restart your device and try again. If you have content protection enabled on your device, please disable and try again."
And, what about the "Content Protection" instruction? Do you have that enabled, and if so have you disabled it?
Otherwise, I can't find any relevant KBs...you can try searching to see if you have better luck. I have seen the error before, though it's been a while. As I recall, I had to use IE over any other PC browser or this error would present.
dboland99 wrote:
extra info - my home wireless is on WAP2 security and has a 64-bit pass word (i.e too long to enter into blackberry)
So, your BB is not connected to your WiFi. That's fine, as long as it has a good data connection via your carrier data network (e.g., email is coming in, you can otherwise browse with the BB Browser, BBM work, etc.). Oh, and you of course do have a full BB-level data plan? If not, AW will never work...like everything else, it's a service, requiring the user to subscribe to an adequate data plan to gain access to the service.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Example of using Message Based Services - Cross group link status

Please, somebody can give me an example of how to Obtain notification of cross-group
Links Established and Lost.
My problem is: I have one BMQ host connected to 5 others BMQ hosts and many messages
exchanged between this hosts and one of my application must know when link is Ok
and when link is not Ok. Based on this information the application will decide what
to do.
Thanks for your help.
Best Regards,
Luis Roberto.

Hey YYY,
I took a look at your code that uses NI-RFSG with your NI-5672 (5610+5442). The original USRP transmit code had to be architected using queues to stream the new samples to the USRP to write each time because there is no onboard memory on the USRP. Since you are using an arb with onboard memory, you don't necessarily have to do this. If you want to keep the queues in the code, you should set up the RFSG portion to look like a streaming application. There is an RFSG example called RFSG Arbitrary Waveform Streaming.vi that is a good place to start to see how the driver is set up. It is a more complex driver than the USRP and has a few extra steps. For example, you need to have a call to niRFSG Initialize.vi, regardless of whether you are doing streaming or not. If you choose to write all of the data to your arb before sending it out, RFSG Arbitrary Waveform Generation.vi is a good place to start.
I'm not entirely sure why your USRP isn't working with the 5672. Can you provide more details? Are you getting an error from the USRP? How do you have the USRP connected to the VSG? Make sure you have an attenuator in the path if you aren't using 2 antennas, it is easy to damage the USRP by putting in too much power. You are using the RFSG soft front panel 1.9, correct? I have used a USRP with RFSG on numerous occasions and not had an issue, so the more details you can provide the easier it will be to troubleshoot.
I don't have the equipment to set up your code and test it out unfortunately. I was going to recommend you post to the RF measurement devices forum, but it looks like you have already done that. Hopefully this information will at least be a starting point to get your system running.
Sarah Y
SDR Product Manager
National Instruments | Ettus Research

Cross-Publication Linking

Johannes describes a (not yet official released way) to link cross publications
Secrets & Happiness of Digital Publishing - Cross-Publication Linking [Bonus: QR codes]
sadly this does not work for us as it does for Johannes.
my problem is
i tried it with a button in ACV folio linking to a published magazine.
the link to the library works. but not to a specific folio or article.
used the link as described. renamed folios so they are url friendly. it always says "Error on download - cant proceed because file is missing or invalid" followed by a second message "error - this article is currently not available for your device". either a free or a 2pay folio. logged in (subscription) or not.
do you have any idea what could be wrong?
cheers, Jonas
and
when i try to link to dps tips of bob it only gives the 2nd error message. using an ipad2 or ipad4. dps is rev 29. also the error occurs if i try to open it from within contenviewer, published folio or safari.
i can link to other folios, but not to a specific folio, or article in a folio.
do you have more insight on that matter?
cheers, Jonas

hi Bob, thanks for your time
i tested it with
a) your custom url
b) our own
with our own custom url i tried linking from the content viewer to the publication as well as linking from one folio in the publication to another.
i tried the following:
the target folio was
a) to pay and we were not logged in with entitlement
b) to pay and we are logged in with entitlement
c) for free and public

The broken link error

Hi,
Please help me with this broken link error in Office Excel 2010. Thank you.
The problem is: a broken link cannot be removed from the file. The link was used in data validation, which refers to a list of values. After the path was corrected, it still shows there’s a broken link. Here are the details:
I have 4 files named “000TVA_Test – 3”, “000TVA_Test – 4”, “000TVA_Test – 5”, and “000TVA_Test – 6”. The posterior files were developed based on the previous files.
In Test-3, sheet “Template “, cell “L4”, “O4”, “R4”… were built as dropdown list using data validation. The list source is in the “Library” worksheet. There’s no problem so far.
Test-4 was firstly copied from Test-3. In this file I renamed the worksheet from “Library” to “Setting” and the link was broken from here. I can also fix the broken link in this file. (While I didn’t realize there was a broken link.)
In Test-5 I fixed the path, but every time when opening the file, the broken link still shows.
In Test-6 I’ve removed the data validations. The broken link is still there.
I tried to find solutions online. I tried common methods, cannot find anything in the files is still using links. I also tried the “findlink.xla” add-in, but it only worked for Test-4, and couldn’t find the link in other files.
Please help. Thank you!
I uploaded files here: https://onedrive.live.com/redir?resid=1A97736E0ABBAA41!113&authkey=!AF5wAd9rwUPnYyE&ithint=folder%2cxlsm
Thanks again!

Hi,
Based on my tested the files downloaded, I found that Test-5 & Test-6 included the "A defined name that refers to an external workbook", Test-4 had not. (Please click Formula Tab>Name Manage, you'll see them.)
However, the Break Links command cannot break the following types of links:
A defined name that refers to an external workbook
A ListBox control with an input range that refers to an external workbook.
A DropDown control with an input range that refers to an external workbook.
http://support2.microsoft.com/kb/291984/en-us (It also applies to Excel 2010)
Thus, we'd better try the workaround： re-build the Test-5 & Test 6.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

I want to use Back to my mac. When I try to turn it on, it says "Back to My Mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again." How do I fix this?

Not sure if I am doing this right. This is my first time in the support community.
I imagine what I put in my heading was supposed to go in here.
I want to use Back to my mac. When I try to turn it on, it says "Back to my mac may be slow because more than one device on your network is providing network services. Turn off NAT and DHCP on one of the devices and try again. See the documentation that came with your device for information about turning off network services"
Does anyone know how I do this? I contacted my ISP (Telus in Canada) and they did not know anything (not that they usually do).

Why do ISPs insist upon making things so difficult for their customers?
If you cannot get them to understand that you would prefer to use your own router over their piece of cheap junk, perhaps the information in the following will be useful:
http://keithbalomben.wordpress.com/2012/03/29/telus-actiontec-v1000h-hacks-and-i nformation/
Scroll down to DHCP Settings
You will need to log in with proper "technician" credentials. They are provided in the above link as
Username: tech
Password: t3lu5tv
... but these may or may not work. Try it, and if you cannot get anywhere at least now you know what to ask Telus to do in return for your business.

Having second hand iPhone 4 of family member now recognized as a device linked to my apple account and not theirs.

I'm sure this has been covered in another tread but I haven't been able to locate a solution to my query so here goes...
I have acquired an iphone 4 (and an iPad 2 but not too concerned with it in this discussion) from a deceased relative. Have unlocked the phone as my uncle's carrier was vodafone which differs from my carrier so no problems there...
The phone is working perfectly as a phone but in terms of transferring apps from my old phone which i have backed up to my macbook pro's itunes to my uncle's phone is proving an issue. In addition to this my old iphone without a sim card but with 3G or Wifi enabled will receive imessages rather than my uncles.
Essentially my uncle's iphone does not seem to respond as a piece of apple tech when synced with my itunes.
I am aware that there is issues with iphones and people having acquired them second hand have been told they have essentially bought a pricey paperweight.
Where my situation differs is I have the account details for my uncle's apple account.
Is there any way given that i have these details i can have my uncle's iphone recognized as a device linked to my apple account so that i can receive imessages and sync backed up apps from my old iphone 4 to this iphone.
Any instructions would be really appreciated and again if this has been covered before please bear with me
Eoghan

Contacted Apples ID support who addressed this issue for me. Many thanks

Device instance error, vista can't see media card

hello,
I have a pearl 8110, with desktop 6 and vista. After upgrading to version 6 I get this device instance error and specifically can't load any media onto the memory card via usb.
USB\VID_0FCA&PID_8001\5&3100FCC1&0&5
been through the forums for months tracking this down on how to clear it. Downloaded the calfix.exe program as that was the only clue that related to the 8001 error, ran it and nothing, did not work. Fix was for versions 4.7 to ver 5.
I can sync, load and upgrade BB software without any problems, tried two different memory card manufacturers, formatted card, pulled battery so many time don't ask me to do it again. mass storage mode is on, but software keeps telling me to turn it on even though its already on, been on since day one! Everything works via bluetooth, pictures, video, mp3, but windows just can't see the memory card.
Also went through the computer management to loocate the drive, but no luck?
Does anyone have any ideas on how to fix?

Greetings, and welcome to the BlackBerry.com Support Forums.
Are you attempting the format or looking at the Media Card from the BB WHILE you are plugged to the USB?
Unplug and try it all again.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Device removal error..... The card reader ejects itself

Hello, I'm new to macs and purchased a Mac Mini a week ago. Things were going well until I needed to move pictures from a digital camera to my mac.
I purchased a GE 19 in 1 card reader which is built for mac os x. I hook it up to a usb port and try and look at some pictures. After a few seconds, the card reader ejects itself and I get the "device removal" error. The error will then continue to appear over and over again. When I try to eject the reader using by clicking eject, the reader ejects and only reappears a minute later and ejects itself again. I've tried using another usb port and I know for sure that its not the cable.
If I can't get any prompt answer here, I'm going to call the Genius bar tomorrow morning and ask about the problem. <Edited by Moderator>

More often than not, when a card reader or other similar device disconnects from the USB bus because it is drawing too much power. In a card reader, that would not unusually be triggered not by the card reader itself, but by the insertion of a card causing it to read the content and mount the volume on the Mac's desktop. Part of the problem is that while everything is invariably quoted as USB compatible, many such devices don't entirely comply with the USB standard, resulting in conflicts or load demands which may be borderline, or worse.
You may be able to get more reliable performance from your reader by disconnecting other USB devices when you are trying to use it, or by using it with a powered USB hub. Occasionally, borderline problems can be temporarily resolved by connecting the device to a different port, if necessary switching devices around. Alternatively, it may be that in an attempt to produce a device with the greatest flexibility in terms of media compatibility, they have compromised on components.
I would generally recommend a card reader designed for the specific card type you need. These are typically far more reliable. If you need to use different types of card media, then be prepared to spent on a well established brand with a reputation in this sector of the market, such as SanDisk.

Invalid sibling link error

I have a 15" PB which gave an "invalid sibling link error" one month ago and I was not able to even repair it using DiskWarrior. I have Apple Care Protection plan, so I sent it for repairs and the repair guys replaced the motherboard as they suspected it was the reason. On return, I reformatted the HD and installed everything from stratch. Everything was working fine till last Saturday morning, when computer would not boot up. So I checked using Disk Utility from PB DVD, and the dreaded "invalid sibling error" came up again. Since I have a bootable backup of the HD, I formatted the HD and tried to load the system on the HD from the backup copy. But the writing of backup using CCC hung up and I had to quit it. After that I was not able to find the HD using Disk Utility from DVD.
I have sent it for repairs again, but can anyone help me understand the core problem here. Since last time they replaced the motherboard, I think they will replace the HD this time around. Is the logic board, motherboard or the HD that is the root cause of the problem?
Powerbook G4 Mac OS X (10.4.7) 100GB HDD, 1.5GB RAM

I had never heard of "invalid sibling link error" until you post, and when I ran a search on it the best explanation I could find is that it is a directory-related problem. See the following (assuming it is correct): http://www.computing.net/mac/wwwboard/forum/2584.html The suggestion there, though, is that DIsk Warrior should be able to fix the problem, and you've already told us that you tried using Disk Warrior on it and it did not work.
Very puzzling. Please post back what happens when you get your PB back from being repaired.
Good luck.
-- JDee

Cross device link error again

Similar Messages

Maybe you are looking for