CRS-0210: Could not find resource while start ASM on 10G RAC
Dear All
I'm trying to install 10g RAC on Redhat 4.1. At the point at which I try to start ASM it fails with the message
ORA-03113: end-of-file on communication channel
select value from v$parameter where name='instance_type'
ERROR at line 1:
ORA-01034: ORACLE not available
This seems to be due to a failure CRS. The trace file shows:
[Thread-11] [17:14:2:907] [HAOperationImpl.runCommand:1254] CRS cmd is: /u01/app/oracle/product/10.2.0/crs/bin/crs_stat -u ora.bfhxx-sql012.ASM1.asm
[Thread-41] [17:14:2:964] [StreamReader.run:65] OUTPUT>CRS-0210: Could not find resource ora.bfhxx-sql012.ASM1.asm.
Executing
/u01/app/oracle/product/10.2.0/crs/bin/crs_stat
produces:
NAME=ora.bfhxx-sql012.LISTENER_BFHXX-SQL012.lsnr
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.gsd
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.ons
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
NAME=ora.bfhxx-sql012.vip
TYPE=application
TARGET=ONLINE
STATE=ONLINE on bfhxx-sql012
Is this a red herring or is it the reason ASM won't start? At what point should this entry have been created (ie should it already exist when ASM starts or should ASM create it)? Can I manually create the entry using crsstat.
Many thanks
Paul
It all depends on what your mapping problem was and what you did to resolve it. Here are a couple of things you could try:
-Make sure the orc.loc file on ebdb1 has the same entry as ebdb2. Also, say you are using shared raw devices for CRS: make sure your raw devices are consistent on both nodes.
If the above does not work
-Make sure the shared devices are consistent on both nodes and restore one of the OCR backups. I am sure at least one of the backups 4hrs/8hrs/1day/2day/1week some thing must be a worthwhile. If you do restore OCR from a backup make sure to run cluvfy before you start your CRS.
Always a good practise to take a backup of status quo before you restore from the backups.
It would be interesting to know what lead to your disk mapping problem in the first palce.
Good Luck!
Similar Messages
-
CRS-0210: Could not find resource 'ora.qlxdgalc001.vip'.
Hi All,
I am in a situation where I was not able to add the vip. This is the scenario:
I recently deleted one of the nodes from a 4 node cluster as some of the h/w maintenance is required for node1. after the maintenance window, I am adding the node back to the cluster. When I add the node back, I am not able to register the vip of the node with the cluster. The command and the error that I am getting are as follows:
[root@qlx001 ~]# srvctl add nodeapps -n qlxdgalc001 -o $ORACLE_HOME -A qlxd001-vip.abc.com/255.255.255.128/bond0
CRS-0210: Could not find resource 'ora.qlxd001.vip'.
Your suggestions are highly appreciated.
Thanks,
Sai.Any replies are highly appreciated.
-
Could not find resource 'ora.node2.vip'
During the extention of node,I get message to run three scipts on nodes:
1 /opt/u01/app/oracle/oraInventory/orainstRoot.sh node2
2 /opt/u01/app/oracle/product/10.2.0/crs_1/install/rootaddnode.sh node3
3 /opt/u01/app/oracle/product/10.2.0/crs_1/root.sh node2
When I run the 2nd script /opt/u01/app/oracle/product/10.2.0/crs_1/install/rootaddnode.sh on node3,get the following error:
[root@node3 ~]# /opt/u01/app/oracle/product/10.2.0/crs_1/install/rootaddnode.sh
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
Attempting to add 1 new nodes to the configuration
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 5: node2 node2-priv node2
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
/opt/u01/app/oracle/product/10.2.0/crs_1/bin/srvctl add nodeapps -n node2 -A node2-vip/255.255.255.0/eth0 -o /opt/u01/app/oracle/product/10.2.0/crs_1
CRS-0210: Could not find resource 'ora.node2.vip'.
Any idea?Have you run cluvfy before the node addition?
The VIP should be resolvable, but not pingable until added to the oracle clusterware.
Try nslookup and ping of the node2-vip and let us know the results. -
[SOLVED] "warning: could not find /bin/bash, starting /bin/sh instead"
Hello all.
I've just installed arch, despite very little knowledge of linux (i had ubuntu for a short while before this), but I like a challenge so i thought i'd throw myself in at the deep end.
The installation went reasonably smoothly, but now i've got it up and running (with a minimal KDE install) but when I open up the konsole, I get the message
"Warning: Could not find '/bin/bash/', starting '/bin/sh' instead. Please check your profile settings."
and subsequently I cannot "su jake" (jake being my username, obviously). It requests my password, but when i press return I get the response
su: /bin/bash/: Not a directory
which means i've obviously done something wrong, but I cant make head nor tail of the archwiki on Bash, and from googling, I cant find anyone with a similar issue. I can run from root, but it's not ideal.
Thanks for any response as to why this might be happening, and how to fix it.
Last edited by hansolo128 (2012-04-24 08:55:37)@oxyd
sh-4.2$ cat /etc/shells
# /etc/shells
/bin/sh
/bin/bash
# End of file
root:x:0:0:root:/root:/bin/bash
jake:x:1000:100::/home/jake:/bin/bash/
the output of /etc/passwd is
root:x:0:0:root:/root:/bin/bash
bin:x:1:1:bin:/bin:/bin/false
daemon:x:2:2:daemon:/sbin:/bin/false
mail:x:8:12:mail:/var/spool/mail:/bin/false
ftp:x:14:11:ftp:/srv/ftp:/bin/false
http:x:33:33:http:/srv/http:/bin/false
nobody:x:99:99:nobody:/:/bin/false
dbus:x:81:81:System message bus:/:/bin/false
jake:x:1000:100::/home/jake:/bin/bash/
usbmux:x:140:140:usbmux user:/:/sbin/nologin
mysql:x:89:89::/var/lib/mysql:/bin/false
kdm:x:135:135::/var/lib/kdm:/bin/false
avahi:x:84:84:avahi:/:/bin/false
moving my home directory from /bin/bash/ to /bin/bash on the line of my username now allows me to su jake, but it doesnt solve the warning that /bin/bash/ doesnt exist. -
Cannot print to PDF - could not find resource file
Using Adobe Acrobat 8.1.4 Pro on Windows XP SP3
I've printed to the Adobe PDF printer a few week ago without problem
Now, when try to print, I get this:
Unable to find "Adobe PDF" resource files.
c:\documents and settings\jsmith\Application Data\Adobe\Adobe PDF\Settings\[]
(the brackets are really a square box that shows up)
The box says: Yes / No
If I click yes, it spends 15 minutes "installing" something and wants a reboot. That does not fix the problem.
I've removed Adobe completely, rebooted. Reinstalled Adobe, still same problem.
I do have a directory of:
\Settings where it is looking, but the directory is empty.
I can EXPORT to PDF just fine
I can open Firefox/IE and "print to" the Adobe PDF printer and that works fine.Thanks TSN.
(how to check if Ram is full )?
the memory is 8 G Ram. I only have office 365, Acrobat X1 pro, Gimp, and Inkscape installed. The problem was there before I installed the last two.
I posted on Microsoft as well and the response was that since I could print the document on regular printer without any issues, then it is an Adobe issue. Using the toolbar is pdfing the full document. That takes a very, very, long time besides at the end of it, many pages are blank in the pdf file and then it is a matter of restarting the computer, re-pdfing until I am tired. So I print the pages incrementally. Any other way to pdf select pages without any problems? -
Could not find Model while pointing to a custom Function Group
Hello ,
I am on EP7.0 ERP05 NW04s and trying to modify ESS Address application to point to a custom function group rather than the standard one . When I tried to do that by changing the mapping for the ReadInfotype I got certain compilation errors ,I fixed those and then got the following error at runtime:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Couldnt find info for class com.sap.xss.hr.per.us.address.custom_model_custom.Zhrxss_Per_Read_P0006_Us_Input in model com.sap.xss.hr.per.us.address.model.HRXSS_PER_P0006_US@10c7f0a[scope=APPLICATION_SCOPE]
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.associatedModelClassInfo(DynamicRFCModelClass.java:220)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.elementIndexForFrontendName(DynamicRFCModelClass.java:1359)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.setAttributeValueAsString(DynamicRFCModelClass.java:664)
at com.sap.xss.hr.per.us.address.custom_model_custom.Zhrxss_Per_Read_P0006_Us_Input.setInfty(Zhrxss_Per_Read_P0006_Us_Input.java:162)
at com.sap.xss.hr.per.us.address.fc.wdp.IPublicFcPerAddressUS$IReadInfotypeElement.setInfty(IPublicFcPerAddressUS.java:11824)
at com.sap.xss.hr.per.us.address.fc.FcPerAddressUS.readRecord(FcPerAddressUS.java:271)
at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUS.readRecord(InternalFcPerAddressUS.java:692)
at com.sap.xss.hr.per.us.address.fc.FcPerAddressUSInterface.readRecord(FcPerAddressUSInterface.java:150)
at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUSInterface.readRecord(InternalFcPerAddressUSInterface.java:230)
at com.sap.xss.hr.per.us.address.fc.wdp.InternalFcPerAddressUSInterface$External.readRecord(InternalFcPerAddressUSInterface.java:306)
at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverview.onBeforeOutput(VcPerAddressUSOverview.java:267)
at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverview.onBeforeOutput(InternalVcPerAddressUSOverview.java:275)
at com.sap.xss.hr.per.us.address.overview.VcPerAddressUSOverviewInterface.onBeforeOutput(VcPerAddressUSOverviewInterface.java:158)
at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface.onBeforeOutput(InternalVcPerAddressUSOverviewInterface.java:140)
at com.sap.xss.hr.per.us.address.overview.wdp.InternalVcPerAddressUSOverviewInterface$External.onBeforeOutput(InternalVcPerAddressUSOverviewInterface.java:224)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.callOnBeforeOutput(FPMComponent.java:602)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:568)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:748)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:283)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I wonder what's the cause of this ...
Any help would be highly appreciated.Do below things.
1. Re-import your Model.
2. Restart your J2ee server
3. Re-load & Rebuild your project.
It should work now..
Raja T
Message was edited by:
Armin Reichert -
Could not find file while installing Flash Player
I downloaded [Adobe Flash Player version 9.0.124.0 for Intel-based Macs|http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=shockwaveFlash] and when I began installing it, right before it was almost done, this window came up:
and when I clicked OK, this window came up:
What do I need to do to be able to install Flash Player on my computer?
Thanks in advance,
-thealexnessThanks for the help didi_vinyl, the uninstallation/installation went very smoothly. Yet I still have a when I go to this one website.
The specific website I am trying to access is at PrincetonReview.com>Student Tools>Your Test Scores/Reports>Your New SAT Online Student Center Score Report>A Diagnostic Test. When you click on the link to the test, it gives you a whole 8 pages of analyzation (for any of you who have taken a Princeton Review Diagnostic Test you know what I'm talking about, and when I click the +Printer Friendly Version+ it gives me two pages with the .
Now according to [this website|http://forums.macosxhints.com/showthread.php?t=83434] that discusses the appearance of :
The "lego" means that you either are missing the Quicktime plugin for that image or have an outdated/wrong plugin installed. Check the folder /Library/Quicktime and re-install any plugins you have there to be sure you're using the Intel version.
So I checked Macintosh HD>Library>Quicktime and I have the following components
1. AppleIntermediateCodec.component
2. CanonMJPEGAVI.component
3. DivX Decoder.component
4. DivX Encoder.component
5. Flip4Mac WMV Advanced.component
6. Flip4Mac WMV Export.component
7. Flip4Mac WMV Import.component
Apart from components 2-7, which I believe are third-party plug-ins, does it look like I am missing any key Quicktime components? Or is this even a Quicktime plug-in issue?
Thanks for all of the help!
-thealexness -
i was given a macbook 5.1 by my mom, being nice, she erased everything on it, but then could not find the original start up disc. i called apple and had the serial number and said that leopard 10.5 was the operating system that orginally came with it, so i bought it. when i got it,i turned on computer, put in dvd, and immediately shut it off, then turned it back on while pressing letter c. (they told me to do this) i can hear the disc turning but alls i get is blank screen then it shuts down, and restarts. nothing ever shows up on the screen. did i get a wrong disc? should there be something different than just the mac os x leopard 10.5 to get this computer to work again?? thanks for your help!
It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium -
CRS-0215: Could not start resource
Hello
This is my first time installing clusterware. However, i have not been too successful at it. This is my configuration:
Operating System: RHES 5.3
Oracle Database 11gR1
OpenFiler used to configure shared disks
After several attempts, i was able to run the root.sh script on both nodes.
Output on first node:
[root@vx0301 oracle]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete
[root@vx0301 oracle]# /u01/crs11g/root.sh
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vx0301 vx0301-priv vx0301
node 2: vx0302 vx0302-priv vx0302
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
vx0301
Cluster Synchronization Services is inactive on these nodes.
vx0302
Local node checking complete. Run root.sh on remaining nodes to start CRS daemons.
Output on second node:
[root@vx0301 oracle]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory to 770.
Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete
[root@vx0301 oracle]# /u01/crs11g/root.sh
Checking to see if Oracle CRS stack is already configured
/etc/oracle does not exist. Creating it now.
Setting the permissions on OCR backup directory
Setting up Network socket directories
Oracle Cluster Registry configuration upgraded successfully
clscfg: EXISTING configuration version 4 detected.
clscfg: version 4 is 11 Release 1.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: vx0301 vx0301-priv vx0301
node 2: vx0302 vx0302-priv vx0302
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Cluster Synchronization Services is active on these nodes.
vx0301
vx0302
I also got the errors:
Starting GSD application resource on (2) nodes1:CRS-0215: Could not start resource 'ora.vx0301.gsd'
Starting ONS application resource on (2) nodes1:CRS-0215: Could not start resource 'ora.vx0301.ons'
There were no log files.
When i clicked ok on the execute scripts page, i got the following errors in the configuration assistants page:
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Notification Server Configuration Assistant" (attempt 2):
Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
Contents of the /u01/crs11g/cfgtoollogs/configToolFailedCommands script:
[oracle@vx0301 ~]$ cat /u01/crs11g/cfgtoollogs/configToolFailedCommands
# Copyright (c) 1999, 2007, Oracle. All rights reserved.
/u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
/u01/crs11g/bin/oifcfg setif -global eth0/172.30.4.0:public eth1/192.168.1.0:cluster_interconnect
/u01/crs11g/bin/cluvfy stage -post crsinst -n vx0301,vx0302
I tried running /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251 manually from the terminal:
[root@vx0301 oracle]# /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
The ONS configuration failed to create
Output of the ons.log file:
[root@vx0301 oracle]# cat /u01/crs11g/log/vx0301/racg/ons.log
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2010-01-25 13:59:15.786: [ RACG][3055679168] [10113][3055679168][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
2010-01-25 13:59:33.359: [ RACG][3055584960] [10229][3055584960][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
2010-01-25 14:01:00.319: [ RACG][3086849728] [10734][3086849728][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
2010-01-25 14:02:02.723: [ RACG][3086628544] [11105][3086628544][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
[root@vx0301 oracle]#
I am absoutely stumped as to what to do next. Any help is greatly appreciated.I tried running ruclufvy.sh stage -post crsinst -n vx0301,vx0302 -verbose. Here is the output:
[oracle@vx0301 clusterware]$ ./runcluvfy.sh stage -post crsinst -n vx0301,vx0302 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "vx0301"
Destination Node Reachable?
vx0301 yes
vx0302 yes
Result: Node reachability check passed from node "vx0301".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
vx0302 passed
vx0301 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
vx0302 running
vx0301 running
Result: Daemon status check passed for "CSS daemon".
Cluster manager integrity check passed.
Checking cluster integrity...
Node Name
vx0301
vx0302
Cluster integrity check passed
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
All nodes free of non-clustered, local-only configurations.
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
ERROR:
OCR integrity is invalid.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
vx0302 yes
vx0301 yes
Result: Liveness check passed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
vx0302 yes
vx0301 yes
Result: Liveness check passed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
vx0302 yes
vx0301 yes
Result: Liveness check passed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
vx0302 yes yes yes
vx0301 yes yes yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
vx0302 yes
vx0301 unknown
Result: CRS health check failed.
CRS integrity check failed.
Checking node application existence...
Checking existence of VIP node application
Node Name Required Status Comment
vx0302 yes exists passed
vx0301 yes exists passed
Result: Check passed.
Checking existence of ONS node application
Node Name Required Status Comment
vx0302 no exists passed
vx0301 no exists passed
Result: Check passed.
Checking existence of GSD node application
Node Name Required Status Comment
vx0302 no exists passed
vx0301 no exists passed
Result: Check passed.
Post-check for cluster services setup was unsuccessful on all the nodes.
[oracle@vx0301 clusterware]$
I also tried running ./ocrchek on both nodes. Here is the output:
[oracle@vx0301 bin]$ ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 3306636
Used space (kbytes) : 2056
Available space (kbytes) : 3304580
ID : 1425438992
Device/File Name : /dev/sdb1
Device/File integrity check failed
Device/File not configured
Cluster registry integrity check failed
[oracle@vx0301 bin]$ ssh vx0302
Last login: Mon Jan 25 13:52:03 2010 from vx0301
[oracle@vx0302 ~]$ cd /u01/crs11g/bin/
[oracle@vx0302 bin]$ ./ocrcheck
Status of Oracle Cluster Registry is as follows :
Version : 2
Total space (kbytes) : 3306636
Used space (kbytes) : 2056
Available space (kbytes) : 3304580
ID : 1425438992
Device/File Name : /dev/sdb1
Device/File integrity check failed
Device/File not configured
Cluster registry integrity check failed
[oracle@vx0302 bin]$
From the results, the ids are the same, and so is the OCR disk. But the integrity check has failed. How do i interpret this output? -
Error: Could not find compiled resource bundle 'components' for locale 'en_US'
We are porting a fairly large body of Flex3 code developed under FlexBuilder 3 to Flex4 under FlashBuilder 4. Most of the conversion appears to be working fine, with one exception. When I launch the Flex4 version, all my data interchanges with the server works. Just as it is about to show the UI, the following error occurs:
Error: Could not find compiled resource bundle 'components' for locale 'en_US'
I am actually using a locale of fr_FR, but I assume it couldn't find that, reverted to en_US, failed again and then barfed. If I look in
~Adobe Flash Builder 4\sdks\4.0.0\frameworks\locale\fr_FR
I see a lot of swc files, and of course no 'components.swc'. I believe the problem is that our Flex3 code is using mx components, and the compatibility mode is not properly handling it for some reason. I think this is mostly from our in-house UI library. The properties for that library (and for my main app I am testing now) have:
- Use default SDK (currently "Flex 4.0")
- Use Flex 3 compability mode
- Use minimum version (Flash Player) required by the Flex SDK
- Enable strict type checking
- Enable warnings
I also tried putting the compatibility flag in the mxmlc compile line, with no change in behavior. This project is built by the following script:
ruby scripts/concat_properties.rb -o resources.properties ^
src/main/flex/locale/fr_common/res_myname_fr_common.properties ^
src/main/flex/locale/fr_common/scout/res_myname_scout_fr_common.properties ^
src/main/flex/locale/fr_fr/res_myname_fr_fr.properties ^
../../scout/common/src/locale/fr_common/mypals/resources.properties
mxmlc -locale=fr_FR -source-path=. ^
-compatibility-version=3.0.0. ^
-static-rsls=true ^
-include-resource-bundles=resources ^
-output src/main/resources/bundles/mypals/fr_fr_resources.swf
copy src\main\resources\bundles\mypals\fr_fr_resources.swf ^
bin-debug\bundles\mypals
What have I missed???You have two posts. I will try to answer each completely. Second one first. You say I should change my build to include the framework resources. I am afraid I am not sure which and what to do there. We combine all our properties file into one large one, then use the following build line:
mxmlc -locale=fr_FR,en_US -source-path=. ^
-compatibility-version=3.0.0. ^
-static-rsls=true ^
-include-resource-bundles=resources ^
-output src/main/resources/bundles/mypals/fr_fr_resources.swf
I am assuming you are telling me to change the "-include-resource-bundles" line, but what to add? The "sdks\4.0.0\frameworks\locale\en_US" holds 13 swf files. I tried adding that entire folder (along with the fr_FR folder) to the project library path (in the project properties dialog), but that made no change. I also tried reverting the library path tab back to "MX Only" instead of "MX + Spark", but again no change.
====================
For your first message, I did a search for 'spark' in the entire project. It only existed on 3 lines, each at the start of css files:
@namespace s "library://ns.adobe.com/flex/spark";
I had put those in based on reading needed changes to naming in CSS. Since I was not actually using any spark ('s') components yet, I removed these lines. The entire project now does not have the word 'spark' anywhere in it. No change in behavior (as I expected).
I did a search for "s:" throughout the project. That does exist in probably 100 places, but all are legitimate. Things like (xmlns:mx="http://www.adobe.com/2006/mxml") or variable names ("var matches:Object"). No reference to any s: object. (While on the topic, why does FlashBuilder still not have a "whole word" box to limit searches??).
Note that when I first reported this problem, the compiler was set to ONLY support fr_FR. In fighting this, I changed it to "en_US,fr_FR" hoping that would tell the compiler to load whatever en_US items it was looking for. We really do not want any English support in this version. (We do have another SWF created with only support for en_US, and another for en_UK, etc. Each language is a separate node on our server, so there is no need to mix & match at runtime)
The console shows a lot of swf loads that I do not understand...
The console output shows (my comments after ==> indicator)
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 2,229,992 bytes after decompression
==> our locale is set here, after the above load and before the next line
Look for name file at: ./data/fr_fr/names.csv
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf - 21,200 bytes after decompression
Loaded 2278 names. ==> indicates successful load of data retrieved from server
Loaded 154 bad words ==> our second data set has been retrieved and loaded
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 58,777 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 322,606 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\bundles\mypals\fr_fr_resources.swf - 595,025 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
==> not sure what this next warning means. I'm guessing I will later have to research it and return to 'secure' comm with server, but I'm ignoring for now
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
Resource bundle loaded for locale fr_fr ==> at this point, we appear to have our French assets loaded successfully
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 202,168 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 1,303,976 bytes after decompression
[Unload SWF] C:\ConnectedProducts\common-web\myname\bin-debug\myname.swf ==> some runs see this, but others do not. I expect it is a timing issue of whether it is reached or not before the crash
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 794,898 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 194,635 bytes after decompression
[SWF] C:\ConnectedProducts\common-web\myname\bin-debug\styles\mypals_style.swf - 261,589 bytes after decompression
==> everything looks fine up to here. This is then when the third call to installCompiledResourceBundles occurs
Error: Could not find compiled resource bundle 'components' for locale 'en_US'.
at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.0.0\frameworks \projects\framework\src\mx\resources\ResourceManagerImpl.as:340]
at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.0.0\framework s\projects\framework\src\mx\resources\ResourceManagerImpl.as:269]
at mx.core::FlexModuleFactory/installCompiledResourceBundles()
at mx.core::FlexModuleFactory/docFrameHandler()
at mx.core::FlexModuleFactory/docFrameListener() -
Could not find the principal resource for user id: paf
I think I have set up iCal server correctly on a MacOSX 10.5.1 server (upgraded from 10.4.x). But regardless of how many different URLs etc I am trying, I can neither access calendars, nor subscribe to them. I am trying both with Safari and Firefox and iCal client on MacOSX 10.5.1.
I have iCal service running.
I have added the user "paf" that have full admin access, and also calendar service is turned on on the server calendar.frobbit.se. Calendar.frobbit.se is one of the hostnames for the server btw.
I have a group called "canusecalendar" that "paf" is a member of.
The access for iCal service on the host is for the group canusecalendar and for the user paf, where paf is administrator.
The closest I have come is when I use a web browser and try to access any URL starting with http://calendar.frobbit.se:8008/. It ask for login, I give the credentials, and in the error log for the iCal service I see the following:
<pre>2008-02-10 20:46:57+0100 [-] [caldav-8009] [AMP,client] Could not find the principal resource for user id: paf</pre>
I do see tons of postings by people that more or less guess what URIs to use in browsers, for group calendars, in iCal client when connecting to an account or subscribing. Does anyone on this list know of an authoritative list of URLs that one should use here and there? The closest I have come is the "advanced" section of the iCal Administration document from Apple.Yes, I add users using workgroup manager, although the one I now use was added already in version 10.4 of MacOSX Server. I.e. before I upgraded to 10.5.
Here is error.log (after that access.log):
<pre>
2008-02-11 20:32:23+0100 [-] Log opened.
2008-02-11 20:32:23+0100 [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] 4 processors found, configuring 4 processes.
2008-02-11 20:32:23+0100 [-] Adding pydirector service with configuration: /tmp/pydirtLZ2ZY
2008-02-11 20:32:23+0100 [-] twistedcaldav.logging.AMPLoggingFactory starting on "'/var/run/caldavd.sock'"
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Log opened.
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] twistd 2.5.0 (/System/Library/Frameworks/Python.framework/Versions/2.5/Resources/Python.app/ Contents/MacOS/Python 2.5.1) starting up
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] reactor class: <class 'twisted.internet.selectreactor.SelectReactor'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring directory service of type: twistedcaldav.directory.appleopendirectory.OpenDirectoryService
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] "Directory service <OpenDirectoryService '/Search': '/Search'> has no GUID; generating service GUID from realm name."
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring SudoDirectoryService with file: /etc/caldavd/sudoers.plist
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up document root at: /Library/CalendarServer/Documents
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up principal collection: <class 'twistedcaldav.directory.principal.DirectoryPrincipalProvisioningResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up calendar collection: <class 'twistedcaldav.static.CalendarHomeProvisioningFile'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up root resource: <class 'twistedcaldav.root.RootResource'>
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up default ACEs on root resource
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up AdminPrincipals
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting root ACL
2008-02-11 20:32:23+0100 [-] [caldav-8009] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Configuring authentication for realm: /Search
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8011] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8012] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8012] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8011] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8010] [KerberosCredentialFactoryBase] getServerPrincipalDetails: ('Principal not found in keytab', -1)
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Could not start Kerberos
2008-02-11 20:32:23+0100 [-] [caldav-8010] [-] Setting up scheme: digest
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring authentication wrapper
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Setting up service
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c930>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding server at 127.0.0.1:8009
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Adding SSL server at 127.0.0.1:8444
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8009
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] twisted.web2.channel.http.HTTPFactory starting on 8444
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] set uid/gid 93/93
2008-02-11 20:32:23+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:23+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring authentication wrapper
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Setting up service
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring authentication wrapper
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Setting up service
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring authentication wrapper
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Setting up service
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding server at 127.0.0.1:8011
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Configuring log observer: <twistedcaldav.logging.AMPCommonAccessLoggingObserver object at 0x145c7b0>
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding server at 127.0.0.1:8012
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Adding SSL server at 127.0.0.1:8447
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding server at 127.0.0.1:8010
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Adding SSL server at 127.0.0.1:8445
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Adding SSL server at 127.0.0.1:8446
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8012
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8010
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:24+0100 [-] [caldav-8010] [-] twisted.web2.channel.http.HTTPFactory starting on 8445
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8011
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] Starting factory <twisted.web2.channel.http.HTTPFactory instance at 0x14595a8>
2008-02-11 20:32:24+0100 [-] [caldav-8011] [-] twisted.web2.channel.http.HTTPFactory starting on 8446
2008-02-11 20:32:24+0100 [-] [caldav-8012] [-] twisted.web2.channel.http.HTTPFactory starting on 8447
2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] set uid/gid 93/93
2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:25+0100 [-] [caldav-8012] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] set uid/gid 93/93
2008-02-11 20:32:25+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] set uid/gid 93/93
2008-02-11 20:32:25+0100 [twistedcaldav.logging.AMPLoggingFactory] AMPLoggingProtocol connection established (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:32:25+0100 [-] [caldav-8011] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd.sock'))
2008-02-11 20:32:57+0100 [-] [caldav-8009] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
2008-02-11 20:32:57+0100 [-] [caldav-8009] [AMP,client] Unauthenticated users not enabled with the 'calendar' SACL
2008-02-11 20:33:04+0100 [-] [caldav-8010] [-] AMP connection established (HOST:UNIXSocket(None) PEER:UNIXSocket('/var/run/caldavd-pydir.sock'))
2008-02-11 20:33:04+0100 [-] [caldav-8010] [AMP,client] Could not find the principal resource for user id: paf
2008-02-11 20:33:35+0100 [-] Received SIGTERM, shutting down.
2008-02-11 20:33:35+0100 [-] (Port None Closed)
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,0,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,1,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,2,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [AMPLoggingProtocol,3,] AMPLoggingProtocol connection lost (HOST:UNIXSocket('/var/run/caldavd.sock') PEER:UNIXSocket(''))
2008-02-11 20:33:35+0100 [-] Main loop terminated.
2008-02-11 20:33:35+0100 [-] Server Shut Down.
</pre>
And here is access.log:
<pre>
Log opened - server start: [Mon Feb 11 20:32:23 2008].
192.165.72.12 - - [11/Feb/2008:20:32:57 +0200] "GET / HTTP/1.1" 401 141 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [6.4 ms]
192.165.72.12 - - [11/Feb/2008:20:33:04 +0200] "GET / HTTP/1.1" 403 123 "-" "Mozilla/5.0 (Macintosh; U; Intel Mac OS X; en-us) AppleWebKit/523.10.6 (KHTML, like Gecko) Version/3.0.4 Safari/523.10.6" [60.7 ms]
Log closed - server stop: [Mon Feb 11 20:33:35 2008].
</pre> -
Have an existing ex2010 sp3 organization.
Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line. I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
still get the same error. The error itself in the log is pretty useless:
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
[05/07/2013 01:19:13.0137] [0] **********************************************
[05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
[05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
[05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
[05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
[05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
[05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
[05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
[05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
[05/07/2013 01:19:40.0496] [0] Starting file's copying...
[05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
[05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
[05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
[05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
[05/07/2013 01:19:59.0762] [0] File's copying finished.
[05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
[05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
[05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
[05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
[05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
[05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
[05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
[05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
[05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
[05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
[05/07/2013 01:20:12.0044] [0] The following roles are installed:
[05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
[05/07/2013 01:20:12.0075] [0] Server Name=WEX1
[05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
[05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
[05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
[05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
[05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
[05/07/2013 01:20:27.0841] [0] Applying default role selection state
[05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
[05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
[05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
[05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
[05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
[05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. See
the Exchange setup log for more information on this error.
[05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
[05/07/2013 01:21:04.0154] [0] End of Setup
[05/07/2013 01:21:04.0154] [0] **********************************************Hi,
The cause is clearly described in the log:
[05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
See the Exchange setup log for more information on this error.
[05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
I'd suggest you check NIC settings and AD configuration.
Hope it is helpful.
Fiona Liao
TechNet Community Support -
Error: Could not find compiled resource bundle 'sparkEffects' for locale 'en_US'
I have a multi-module application that I am building in Flash Builder 4.5 Premium.
When I launch the application It starts with a basic login page and looks ok. After logging in, modules and style sheets are loaded dynamically and I get this exception stack trace.
Error: Could not find compiled resource bundle 'sparkEffects' for locale 'en_US'.
at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()
at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()
at mx.core::FlexModuleFactory/installCompiledResourceBundles()
at mx.core::FlexModuleFactory/docFrameHandler()
at mx.core::FlexModuleFactory/docFrameListener()
Windows 7
Flashbuilder 4.5 Premium
Compiled with SDK 4.5.1
Flex 3 Compatibility Mode: No
Framework Linkage: RSL
SWC Project Linkage: RSL
Can anyone help me fix this?I have determined at least that it is the very first style sheet that I am loading into the application that is causing the exception as I modified to not load anything else.
Style sheets are loadingusing this method. FlexGlobals.topLevelApplication.styleManager.loadStyleDeclarations -
Error: Could not find compiled resource bundle 'logging' for locale 'fr_FR'
Hello
I'm developping a mobile application based on Flex 4.6 + Adobe AIR 3.5
There is no error when compiling, but when the application starts it crashes whith this error message:
Error: Could not find compiled resource bundle 'logging' for locale 'fr_FR'.
at mx.resources::ResourceManagerImpl/installCompiledResourceBundle()[E:\dev\4.y\frameworks\p rojects\framework\src\mx\resources\ResourceManagerImpl.as:392]
at mx.resources::ResourceManagerImpl/installCompiledResourceBundles()[E:\dev\4.y\frameworks\ projects\framework\src\mx\resources\ResourceManagerImpl.as:306]
at mx.resources::ResourceManagerImpl/processInfo()[E:\dev\4.y\frameworks\projects\framework\ src\mx\resources\ResourceManagerImpl.as:450]
at mx.resources::ResourceManagerImpl()[E:\dev\4.y\frameworks\projects\framework\src\mx\resou rces\ResourceManagerImpl.as:133]
at mx.resources::ResourceManager$/getInstance()[E:\dev\4.y\frameworks\projects\framework\src \mx\resources\ResourceManager.as:117]
at mx.styles::StyleManagerImpl()[E:\dev\4.y\frameworks\projects\framework\src\mx\styles\Styl eManagerImpl.as:380]
at _ASMagnetoFute_iOS_FlexInit$/init()
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()[E:\dev\4.y\frameworks\projects\framework\src\mx\managers\SystemManager.as:2815]
at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()[E:\dev\4.y\frameworks\projects\framework\src\mx\managers\SystemManager.as:2723]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/timerHandler()[E:\dev\4.y\frameworks\projects\framework\src\mx\p reloaders\Preloader.as:542]
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
The application is in french, both for iOS and Android.
It is split in several libs, an application for iOS and another one for android.
I use the same SDK for another mobile application without any problem -but it does not use the mx.logging package.
I tried many things, like the solution described in http://forums.adobe.com/thread/758619, but it did not solve the problem. After listing the bundles used I added
-include-resource-bundles=MagnetoFute,collections,components,core,effects,fiber,layout,log ging,messaging,rpc,serializer,skins,sparkEffects,styles,textLayout,utils,validators
to my compiler arguments.
Help would be greatly appreciated.I don't know if Adobe has an fr_FR locale for the logging bundle. You can try creating your own to see if that is the only one missing or if there is a whole resource swc missing.
-
Hi,
I created custom BDC Model using Visual Studio. In ReadList method i am getting data using Web Service call. Using this External Content Type (BDC Model) i created one external list and it is populating with data.
I created one new content source in search service application using this BDC Model and when crawled this content source i am getting the below error.
Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Runtime.RuntimeException MethodInstance with Name 'ReadList' on Entity (External Content Type) with Name 'Entity1' in Namespace 'bcsex.BdcModel1' failed
unexpectedly. The failure occurred in method 'ReadList' defined in class 'bcsex.BdcModel1.EntityService1' with the message 'Could not find default endpoint element that references contract 'ServiceReference1.Service1Soap' in the ServiceModel client configuration
section.
I included the bindings and client end point configuration settings in web.config file located at
\\Inetpub\wwwroot\wss\VirtualDirectories\Port_Number, but still getting the same error.
Please help. Thanks a lot.The Issue resolved by including the bindings and client end point configuration settings in
machine.config file located at C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Config\ and also restarted the server after config changes.
Maybe you are looking for
-
I can no longer burn CDs from my iTunes (Macintosh) playlists. The songs are now formatted as m4a, which might be making them unreadable by my CDs, although this never used to happen before. Can you help? Thanks very much.
-
Gross Sales from Standard InfoCube (0SD_C03)
Dear SDN, I am using 0SD_C03 InfoCube.. How to get Gross Sales from this InfoCube.. I am getting only Subtotal1 and Subtotal2 Net Price = Subtotal1 (As per my knowledge) Subtotal3 and Subtotal4 values are Zero Please tell me alternative solution to c
-
Kernel Panics with Mountain Lion
Hello everyone! I am having some problems with my Macbook Pro. I purchased it in late 2010 for school and ever since I upgraded the software to Mountain Lion, I've noticed some kernel panic crashes. Around April, shortly after upgrading, I noticed th
-
For the second time in as many months I have had to roll back to version 3.6.19 as the new firefox (versions 4 or 5) was unable to use 'no script', 'forecastfox' or 'download status bar'. I hope mozilla will continue to support v3.6.19 until my issue
-
When we have a purchase command of 3 elements, and we select distribution by percentage in the account assignement part, it automatically attributes 33.3 for each line. But 33.3 * 3 gives only 99.9 and not 100. How to allocate to have 100% correctly?