CRS on Redhat 5 auto-start problem

Dear all
Recently I tried to install Oracle 10gR2 on Redhat 5. I did research and took all the necessary actions to install it on Redhat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD was in unknown format. When I stop the nodeapps and start it again, everything stars working. It seems that the problem is something to do with boot process. I tried to put some delay ( for OCR mount ) but still no luck. This is the result from crsd.log from node1 when node2 is down.. :
2009-06-24 22:00:07.461: [ default][3594852768]0CRS Daemon Starting
2009-06-24 22:00:07.461: [ CRSMAIN][3594852768]0Checking the OCR device
2009-06-24 22:00:07.464: [ CRSMAIN][3594852768]0Connecting to the CSS Daemon
2009-06-24 22:00:07.838: [ COMMCRS][1103116608]clsc_connect: (0x151f20d0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:07.838: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:07.838: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:09.307: [ COMMCRS][1103116608]clsc_connect: (0x151f23b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:09.307: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:09.307: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:10.773: [ COMMCRS][1103116608]clsc_connect: (0x151f25c0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:10.773: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:10.774: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:12.150: [ COMMCRS][1103116608]clsc_connect: (0x151f2880) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1dr_crsdr))
2009-06-24 22:00:12.150: [ CSSCLNT][3594852768]clsssInitNative: connect failed, rc 9
2009-06-24 22:00:12.150: [ CRSRTI][3594852768]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2009-06-24 22:00:19.093: [    CRSD][3594852768]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2009-06-24 22:00:19.093: [    CRSD][3594852768]0Active Version and Software Version are same
2009-06-24 22:00:19.093: [ CRSMAIN][3594852768]0Initializing OCR
2009-06-24 22:00:19.098: [ OCRRAW][3594852768]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.128: [ OCRMAS][1228994880]th_master:12: I AM THE NEW OCR MASTER at incar 1. Node Number = 1
2009-06-24 22:00:19.129: [ OCRRAW][1228994880]proprioo: for disk 0 (/u02/oradata/orcl/OCRFile), id match (1), my id set (503252545,1028247821) total id sets (1), 1st set (503252545,1028247821), 2nd set (0,0) my votes (2), total votes (2)
2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: allcomp 0
2009-06-24 22:00:19.144: [    CRSD][3594852768]0ENV Logging level for Module: default 0
2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMCRS 0
2009-06-24 22:00:19.145: [    CRSD][3594852768]0ENV Logging level for Module: COMMNS 0
2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSUI 0
2009-06-24 22:00:19.146: [    CRSD][3594852768]0ENV Logging level for Module: CRSCOMM 0
2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSRTI 0
2009-06-24 22:00:19.148: [    CRSD][3594852768]0ENV Logging level for Module: CRSMAIN 0
2009-06-24 22:00:19.149: [ OCRSRV][1249974592]th_select_handler: Failed to retrieve procctx from ht. constr = [363817168] retval lht [-27] Signal CV.
2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSPLACE 0
2009-06-24 22:00:19.149: [    CRSD][3594852768]0ENV Logging level for Module: CRSAPP 0
2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSRES 0
2009-06-24 22:00:19.150: [    CRSD][3594852768]0ENV Logging level for Module: CRSOCR 0
2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSTIMER 0
2009-06-24 22:00:19.151: [    CRSD][3594852768]0ENV Logging level for Module: CRSEVT 0
2009-06-24 22:00:19.152: [    CRSD][3594852768]0ENV Logging level for Module: CRSD 0
2009-06-24 22:00:19.153: [    CRSD][3594852768]0ENV Logging level for Module: CLUCLS 0
2009-06-24 22:00:19.154: [    CRSD][3594852768]0ENV Logging level for Module: OCRRAW 0
2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: OCROSD 0
2009-06-24 22:00:19.155: [    CRSD][3594852768]0ENV Logging level for Module: CSSCLNT 0
2009-06-24 22:00:19.156: [    CRSD][3594852768]0ENV Logging level for Module: OCRAPI 0
2009-06-24 22:00:19.157: [    CRSD][3594852768]0ENV Logging level for Module: OCRUTL 0
2009-06-24 22:00:19.158: [    CRSD][3594852768]0ENV Logging level for Module: OCRMSG 0
2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCLI 0
2009-06-24 22:00:19.159: [    CRSD][3594852768]0ENV Logging level for Module: OCRCAC 0
2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRSRV 0
2009-06-24 22:00:19.160: [    CRSD][3594852768]0ENV Logging level for Module: OCRMAS 0
2009-06-24 22:00:19.161: [ CRSMAIN][3594852768]0Filename is /u01/app/crs/crs/init/rac1dr.pid
[ clsdmt][1417812288]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1drDBG_CRSD))
2009-06-24 22:00:19.506: [ CRSMAIN][3594852768]0Using Authorizer location: /u01/app/crs/crs/auth/
2009-06-24 22:00:19.760: [ CRSMAIN][3594852768]0Initializing RTI
2009-06-24 22:00:19.761: [CRSTIMER][1438792000]0Timer Thread Starting.
2009-06-24 22:00:19.770: [ CRSRES][3594852768]0Parameter SECURITY = 1, running in USER Mode
2009-06-24 22:00:19.770: [ CRSMAIN][3594852768]0Initializing EVMMgr
2009-06-24 22:00:19.996: [ COMMCRS][1449281856]clsc_connect: (0x15b1dc20) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=SYSTEM.evm.acceptor.auth))
2009-06-24 22:00:21.860: [ CRSMAIN][3594852768]0CRSD locked during state recovery, please wait.
2009-06-24 22:00:22.494: [ CRSMAIN][3594852768]0CRSD recovered, unlocked.
2009-06-24 22:00:22.496: [ CRSMAIN][3594852768]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2009-06-24 22:00:22.604: [ CRSMAIN][3594852768]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=rac1dr-priv)(PORT=49896))
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0Starting Threads
2009-06-24 22:00:22.607: [ CRSMAIN][3594852768]0CRS Daemon Started.
2009-06-24 22:00:23.732: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:23.821: [ CRSRES][1554180416]0Attempting to start `ora.rac2dr.vip` on member `rac1dr`
2009-06-24 22:00:23.822: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:23.935: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.vip` on member `rac1dr`
2009-06-24 22:00:30.657: [ CRSRES][1554180416]0Start of `ora.rac2dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:30.705: [ CRSRES][1543690560]0Start of `ora.rac1dr.vip` on member `rac1dr` succeeded.
2009-06-24 22:00:31.408: [ CRSRES][1554180416]0startRunnable: setting CLI values
2009-06-24 22:00:31.410: [ CRSRES][1543690560]0startRunnable: setting CLI values
2009-06-24 22:00:31.647: [ CRSRES][1554180416]0Attempting to start `ora.rac1dr.gsd` on member `rac1dr`
2009-06-24 22:00:31.708: [ CRSRES][1543690560]0Attempting to start `ora.rac1dr.ons` on member `rac1dr`
2009-06-24 22:00:32.538: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.538: [ CRSAPP][1554180416]0StartResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.573: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.573: [ CRSAPP][1543690560]0StartResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.737: [ CRSEVT][1554180416]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.gsd! (timeout=600)
2009-06-24 22:00:32.737: [ CRSAPP][1554180416]0StopResource error for ora.rac1dr.gsd error code = -2
2009-06-24 22:00:32.837: [ CRSEVT][1543690560]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.rac1dr.ons! (timeout=600)
2009-06-24 22:00:32.837: [ CRSAPP][1543690560]0StopResource error for ora.rac1dr.ons error code = -2
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.873: [ CRSRES][1554180416][ALERT]0`ora.rac1dr.gsd` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.873: [ CRSRES][1554180416]0Human intervention required to resume its availability.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2009-06-24 22:00:32.921: [ CRSRES][1543690560][ALERT]0`ora.rac1dr.ons` on member `rac1dr` has experienced an unrecoverable failure.
2009-06-24 22:00:32.921: [ CRSRES][1543690560]0Human intervention required to resume its availability.
Any help is highly appreciated.
Kamy

CRS on RHEL 5.5 auto-start problem
hi all
Recently I install RAC Oracle 10gR2 on Red hat RHEL 5.5. “Two node cluster, iscsi storage, ocfs2 mounted files & ASM ”
I did research and took all the necessary actions to install it on Red hat. Everything went well, according to the documents and at the end of the installation, all the resources were up and running. However, after the install, only the VIP was up and ONS and GSD ,ASM and the other services was in unknown state. When I stop the CRS & start it –all again, everything stars working. Please friends I need to fix this problem because the cluster services and the client workstation are stopping when the servicers is relocated to node 1 after the server reboot because the CRS did not worked still on node and manual starting is taking time.
This is the result from crsd.log from node1 when node is online .
Name Type Target State Host
ora....SM1.asm      application ONLINE UNKNOWN linux1
ora....X1.lsnr      application ONLINE UNKNOWN linux1
ora.linux1.gsd     application ONLINE UNKNOWN linux1
ora.linux1.ons      application ONLINE UNKNOWN linux1
ora.linux1.vip     application ONLINE ONLINE linux1
ora....SM2.asm     application ONLINE ONLINE linux2
ora....X2.lsnr      application ONLINE ONLINE linux2
ora.linux2.gsd      application ONLINE ONLINE linux2
ora.linux2.ons     application ONLINE ONLINE linux2
ora.linux2.vip      application ONLINE ONLINE linux2
ora.mutdb.db      application ONLINE ONLINE linux2
ora....b1.inst      application ONLINE OFFLINE
ora....b2.inst      application ONLINE ONLINE linux2
ora...._taf.cs      application ONLINE ONLINE linux2
ora....db1.srv      application ONLINE UNKNOWN linux1
ora....db2.srv      application ONLINE ONLINE linux2
############################### CRS Log ON Node 1 ##################################
2010-05-27 11:54:57.357: [ default][3741415840][ENTER]0
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2004, Oracle. All rights reserved
2010-05-27 11:54:57.366: [ default][3741415840]0CRS Daemon Starting
2010-05-27 11:54:57.366: [ CRSMAIN][3741415840]0Checking the OCR device
2010-05-27 11:54:57.379: [ CRSMAIN][3741415840]0Connecting to the CSS Daemon
2010-05-27 11:54:57.783: [ COMMCRS][1107867968]clsc_connect: (0x8481ce0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:57.783: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:57.783: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:54:59.182: [ COMMCRS][1107867968]clsc_connect: (0x8481f60) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:54:59.182: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:54:59.182: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:00.569: [ COMMCRS][1107867968]clsc_connect: (0x84821f0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:00.569: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:00.569: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:01.954: [ COMMCRS][1107867968]clsc_connect: (0x84824b0) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_linux1_crs))
2010-05-27 11:55:01.954: [ CSSCLNT][3741415840]clsssInitNative: connect failed, rc 9
2010-05-27 11:55:01.954: [ CRSRTI][3741415840]0CSS is not ready. Received status 3 from CSS. Waiting for good status ..
2010-05-27 11:55:05.924: [    CRSD][3741415840]0Daemon Version: 10.2.0.1.0 Active Version: 10.2.0.1.0
2010-05-27 11:55:05.924: [    CRSD][3741415840]0Active Version and Software Version are same
2010-05-27 11:55:05.924: [ CRSMAIN][3741415840]0Initializing OCR
2010-05-27 11:55:05.937: [ OCRRAW][3741415840]proprioo: for disk 0 (/u02/OCR_1.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.938: [ OCRRAW][3741415840]proprioo: for disk 1 (/u03/OCR_2.dbf), id match (1), my id set (1273042630,1936275375) total id sets (1), 1st set (1273042630,1936275375), 2nd set (0,0) my votes (1), total votes (2)
2010-05-27 11:55:05.981: [    CRSD][3741415840]0ENV Logging level for Module: allcomp 0
2010-05-27 11:55:05.983: [    CRSD][3741415840]0ENV Logging level for Module: default 0
2010-05-27 11:55:05.994: [    CRSD][3741415840]0ENV Logging level for Module: COMMCRS 0
2010-05-27 11:55:05.996: [    CRSD][3741415840]0ENV Logging level for Module: COMMNS 0
2010-05-27 11:55:05.999: [    CRSD][3741415840]0ENV Logging level for Module: CRSUI 0
2010-05-27 11:55:06.001: [    CRSD][3741415840]0ENV Logging level for Module: CRSCOMM 0
2010-05-27 11:55:06.003: [    CRSD][3741415840]0ENV Logging level for Module: CRSRTI 0
2010-05-27 11:55:06.006: [    CRSD][3741415840]0ENV Logging level for Module: CRSMAIN 0
2010-05-27 11:55:06.008: [    CRSD][3741415840]0ENV Logging level for Module: CRSPLACE 0
2010-05-27 11:55:06.010: [    CRSD][3741415840]0ENV Logging level for Module: CRSAPP 0
2010-05-27 11:55:06.012: [    CRSD][3741415840]0ENV Logging level for Module: CRSRES 0
2010-05-27 11:55:06.015: [    CRSD][3741415840]0ENV Logging level for Module: CRSOCR 0
2010-05-27 11:55:06.017: [    CRSD][3741415840]0ENV Logging level for Module: CRSTIMER 0
2010-05-27 11:55:06.019: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [148436880] retval lht [-27] Signal CV.
2010-05-27 11:55:06.019: [    CRSD][3741415840]0ENV Logging level for Module: CRSEVT 0
2010-05-27 11:55:06.022: [    CRSD][3741415840]0ENV Logging level for Module: CRSD 0
2010-05-27 11:55:06.024: [    CRSD][3741415840]0ENV Logging level for Module: CLUCLS 0
2010-05-27 11:55:06.027: [    CRSD][3741415840]0ENV Logging level for Module: OCRRAW 0
2010-05-27 11:55:06.029: [    CRSD][3741415840]0ENV Logging level for Module: OCROSD 0
2010-05-27 11:55:06.032: [    CRSD][3741415840]0ENV Logging level for Module: CSSCLNT 0
2010-05-27 11:55:06.034: [    CRSD][3741415840]0ENV Logging level for Module: OCRAPI 0
2010-05-27 11:55:06.036: [    CRSD][3741415840]0ENV Logging level for Module: OCRUTL 0
2010-05-27 11:55:06.039: [    CRSD][3741415840]0ENV Logging level for Module: OCRMSG 0
2010-05-27 11:55:06.041: [    CRSD][3741415840]0ENV Logging level for Module: OCRCLI 0
2010-05-27 11:55:06.043: [    CRSD][3741415840]0ENV Logging level for Module: OCRCAC 0
2010-05-27 11:55:06.046: [    CRSD][3741415840]0ENV Logging level for Module: OCRSRV 0
2010-05-27 11:55:06.048: [    CRSD][3741415840]0ENV Logging level for Module: OCRMAS 0
2010-05-27 11:55:06.048: [ CRSMAIN][3741415840]0Filename is /u01/app/crs/crs/init/linux1.pid
[ clsdmt][1401583936]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=linux1DBG_CRSD))
2010-05-27 11:55:06.119: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149741888] retval lht [-27] Signal CV.
2010-05-27 11:55:07.002: [ CRSMAIN][3741415840]0Using Authorizer location: /u01/app/crs/crs/auth/
2010-05-27 11:55:07.008: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149755728] retval lht [-27] Signal CV.
2010-05-27 11:55:07.230: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [149740416] retval lht [-27] Signal CV.
2010-05-27 11:55:07.380: [ CRSMAIN][3741415840]0Initializing RTI
2010-05-27 11:55:07.380: [CRSTIMER][1422563648]0Timer Thread Starting.
2010-05-27 11:55:07.386: [ CRSRES][3741415840]0Parameter SECURITY = 1, running in USER Mode
2010-05-27 11:55:07.386: [ CRSMAIN][3741415840]0Initializing EVMMgr
2010-05-27 11:55:07.453: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150974816] retval lht [-27] Signal CV.
2010-05-27 11:55:07.474: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150975552] retval lht [-27] Signal CV.
2010-05-27 11:55:07.485: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150988032] retval lht [-27] Signal CV.
2010-05-27 11:55:07.723: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150998720] retval lht [-27] Signal CV.
2010-05-27 11:55:07.734: [ CRSMAIN][3741415840]0CRSD locked during state recovery, please wait.
2010-05-27 11:55:07.737: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [150997792] retval lht [-27] Signal CV.
2010-05-27 11:55:07.923: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [151007072] retval lht [-27] Signal CV.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0CRSD recovered, unlocked.
2010-05-27 11:55:08.032: [ CRSMAIN][3741415840]0QS socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=ora_crsqs))
2010-05-27 11:55:08.051: [ CRSMAIN][3741415840]0CRSD UI socket on: (ADDRESS=(PROTOCOL=ipc)(KEY=CRSD_UI_SOCKET))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0E2E socket on: (ADDRESS=(PROTOCOL=tcp)(HOST=linux1-priv)(PORT=49896))
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0Starting Threads
2010-05-27 11:55:08.055: [ CRSMAIN][3741415840]0CRS Daemon Started.
2010-05-27 11:55:08.204: [ CRSRES][1527462208]0StopResource: setting CLI values
2010-05-27 11:55:08.220: [ CRSRES][1527462208]0Attempting to stop `ora.linux1.vip` on member `linux2`
2010-05-27 11:55:08.515: [ CRSRES][1527462208]0Stop of `ora.linux1.vip` on member `linux2` succeeded.
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:08.529: [ CRSRES][1527462208]0Attempting to start `ora.linux1.vip` on member `linux1`
2010-05-27 11:55:08.686: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154566384] retval lht [-27] Signal CV.
2010-05-27 11:55:14.000: [ CRSRES][1527462208]0Start of `ora.linux1.vip` on member `linux1` succeeded.
2010-05-27 11:55:14.231: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.272: [ CRSRES][1527462208]0Attempting to start `ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1`
2010-05-27 11:55:14.426: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.426: [ CRSAPP][1527462208]0StartResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.489: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.LISTENER_LINUX1.lsnr! (timeout=600)
2010-05-27 11:55:14.489: [ CRSAPP][1527462208]0StopResource error for ora.linux1.LISTENER_LINUX1.lsnr error code = -2
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.495: [ CRSRES][1527462208][ALERT]0`ora.linux1.LISTENER_LINUX1.lsnr` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.495: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:14.628: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:14.698: [ CRSRES][1527462208]0Attempting to start `ora.linux1.ASM1.asm` on member `linux1`
2010-05-27 11:55:14.836: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.836: [ CRSAPP][1527462208]0StartResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.875: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.linux1.ASM1.asm! (timeout=600)
2010-05-27 11:55:14.875: [ CRSAPP][1527462208]0StopResource error for ora.linux1.ASM1.asm error code = -2
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:14.881: [ CRSRES][1527462208][ALERT]0`ora.linux1.ASM1.asm` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:14.881: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.051: [ CRSRES][1527462208]0CRS-1028: Dependency analysis failed because of:
'Resource in UNKNOWN state: ora.linux1.ASM1.asm'
2010-05-27 11:55:15.185: [ CRSRES][1527462208]0startRunnable: setting CLI values
2010-05-27 11:55:15.237: [ CRSRES][1537952064]0startRunnable: setting CLI values
2010-05-27 11:55:15.306: [ CRSRES][1558931776]0startRunnable: setting CLI values
2010-05-27 11:55:15.339: [ CRSRES][1527462208]0Attempting to start `ora.linux1.gsd` on member `linux1`
2010-05-27 11:55:15.397: [ CRSRES][1537952064]0Attempting to start `ora.linux1.ons` on member `linux1`
2010-05-27 11:55:15.407: [ CRSRES][1558931776]0Attempting to start `ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1`
2010-05-27 11:55:15.789: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.789: [ CRSAPP][1527462208]0StartResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.808: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(start) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.808: [ CRSAPP][1537952064]0StartResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.812: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(start) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.812: [ CRSAPP][1558931776]0StartResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.838: [ CRSEVT][1527462208]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.gsd! (timeout=600)
2010-05-27 11:55:15.838: [ CRSAPP][1527462208]0StopResource error for ora.linux1.gsd error code = -2
2010-05-27 11:55:15.844: [ CRSEVT][1537952064]0CAAMonitorHandler :: 0:Action Script /u01/app/crs/bin/racgwrap(stop) timed out for ora.linux1.ons! (timeout=600)
2010-05-27 11:55:15.845: [ CRSAPP][1537952064]0StopResource error for ora.linux1.ons error code = -2
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.849: [ CRSRES][1527462208][ALERT]0`ora.linux1.gsd` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.849: [ CRSRES][1527462208]0Human intervention required to resume its availability.
2010-05-27 11:55:15.859: [ CRSEVT][1558931776]0CAAMonitorHandler :: 0:Action Script /u01/app/oracle/product/10.2.0/db_1/bin/racgwrap(stop) timed out for ora.mutdb.mutdb_taf.mutdb1.srv! (timeout=600)
2010-05-27 11:55:15.860: [ CRSAPP][1558931776]0StopResource error for ora.mutdb.mutdb_taf.mutdb1.srv error code = -2
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.863: [ CRSRES][1537952064][ALERT]0`ora.linux1.ons` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.863: [ CRSRES][1537952064]0Human intervention required to resume its availability.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0X_OP_StopResourceFailed : Stop Resource failed
(File: rti.cpp, line: 1698
2010-05-27 11:55:15.869: [ CRSRES][1558931776][ALERT]0`ora.mutdb.mutdb_taf.mutdb1.srv` on member `linux1` has experienced an unrecoverable failure.
2010-05-27 11:55:15.869: [ CRSRES][1558931776]0Human intervention required to resume its availability.
2010-05-27 11:55:20.450: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
2010-05-27 11:55:21.130: [ OCRSRV][1223256384]th_select_handler: Failed to retrieve procctx from ht. constr = [154578560] retval lht [-27] Signal CV.
I tired this solution it was on website “but it did not work”
下面是METALINK给出的解释：
I have checked the information provided. crsd is reporting timeouts when running the checking actions. The racgmain process on the other hand, executed by racgwrap, remain running so the number is increasing.This issue has been reported in Bug 7009245 ""RACGMAIN CHECK" PROCESS NOT TERMINATING", and drill down and determine the root cause this require to get a stack trace from racgmain process(es) as well as you should runOSWatcher with a specific parameters, finally the issue of Bug 7009245 has been fixed by the fix of Bug 6196746 (unpublished bug -- summary is "racgwrap spawns racgmain child process. crsd timeout kills racgwrap but bot racgmain")So please perform the following action plan that intend to solve the issue.
.ACTION PLAN
============
1. Stop CRS on this node.
2. Make a copy of racgwrap located under $ORACLE_HOME/bin and $CRS_HOME/bin
3. Edit the file racgwrap and modify the last 3 lines from:
.$ORACLE_HOME/bin/racgmain "$@"
status=$?
exit $status
.to:
.# Line added to test fix for Bug 6196746
exec $ORACLE_HOME/bin/racgmain "$@"
.4. Restart CRS and make sure that all the resources are startes
This should solve the issue. also if you are not able to stop CRS right now, you can try the
solution without crs stop/start.
BUT IT DID NOT WORK
###################################################3

Similar Messages

Xfce auto start problem

Hello, First time posting so don't punish me for any mistakes
Here is the problem:
After removing gnome and installing xfce Arch doesn't go into GUI mode automatically.
I am stuck at the command line.
From there I can type startxfce4 and it work but I want it do to start automatically.
This is my .xinitrc file
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
exec startxfce4
# ...or the Window Manager of your choice
and this is my .bash_profile
# ~/.bash_profile
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec startx
Any inputs are highly appreciated!!
Last edited by Ace (2014-01-21 18:55:13)

Put a bit of debugging info in your script, to remove some uncertainty. E.g.:
echo "Checking whether to run xorg"
First run this, to be on safe side:
chmod 700 ~/.bash_profile
Here's how I do it, in my ~/.bash_profile
# My ~/.bashrc does everything - convenient, but slightly un-optimized
. $HOME/.bashrc
hour=$(date +%k | sed "s:^ ::")
if [[ $hour -ge 8 ]] && [[ $hour -le 9 ]] ; then
if [[ `tty` == "/dev/tty1" ]] && [[ -z `pgrep ^X$` ]] ; then
if lsmod | grep -qw ^nvidia ; then
echo "Starting xorg"
# https://bbs.archlinux.org/viewtopic.php?id=150539
setsid /usr/bin/startx -- -nolisten tcp &> ~/.xorg.log & logout
fi
fi
fi
Edit: Oops, got a bit confused, ignore this last line
Last edited by brebs (2014-01-22 20:07:52)

Iphoto version 7.1.5 auto start problem

Every time I turn on my imac (Mac OS X version 10.5.8), iphoto (version 7.1.5) automatically starts up. How do I stop iphoto from opening every time I start my computer? Thanks

Do you have any storage devices connected taht are formatted FAT? iPhoto sees these as cameras - so if yu do the solution is to disconnect ehm or to set the iphto ction when a camera is connected to do nothing in the iPhoto preferences
If that is not it look in your start up items in yuor accountin the system preferences
And right click on iPhoto in the Dock an be sure that it is not set up to opn at start up
LN

CRS auto-start

Guys,
Got an irritating problem with CRS not auto-starting after a reboot.
O/S - SLES 10 SP1
CRS - 10.2.0.1
RAC - 10.2.0.3
2 node cluster
I have issued the command 'crctl enable crs' and also tried '/etc/init.d/init.crs enable' which should activate CRS to auto-start but it doesn't.
I can manually start it with no problem.
Any ideas?
Matt

Ok, not knowing too much about Linux sys admin I've learnt something new from your post in that inittab defines what gets started on boot. Nice one.
The last three lines in inittab look like this:
h1:35:respawn:/etc/init.d/init.evmd run >/dev/null 2>&1 </dev/null
h2:35:respawn:/etc/init.d/init.cssd fatal >/dev/null 2>&1 </dev/null
h3:35:respawn:/etc/init.d/init.crsd run >/dev/null 2>&1 </dev/null
(I've had to manually type this into the post cos the server is on a closed network so I can't copy and paste.)
Anyway, that looks like it might be correct? Is there a log I can check to see what actually happened on boot?

Skype/Pulse audio problem only if auto started

Hi,
I've an Arch/XFCE laptop including pulse audio and Skype (configured to use the pulse audio).
Skype has been configured (using XFCE startup menu) to auto start during boot ( we boot daily), and, till about 2 weeks ago, worked fine.
Ever since, Skype starts but isn't functional (while trying to connect to the test service I can't hear anything, not even the dialing), and, after a few minutes, starts with a constant loud noise (which stops, once I quit Skype).
Interesting, since the problem has begun, once I do either of the following, Skype returns, and remains, to be fully functional without any noise:
1. Quit the auto-started Skype, and immediately relaunch it.
2. Cancel to Skype auto start, and manually start Skype after XFCE becomes visible.
Looking at log files (below), I've seen some pulse audio related errors which I couldn't solve and may be related.
I do a full system update (almost) daily.
I'd be happy to return to the former state (functional auto-started Skype). Please advise
Thanks
----------partial end of journal------------------
Jun 08 08:51:08 Ira-Lenovo lightdm[246]: ** (process:272): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
Jun 08 08:51:08 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session opened for user lightdm by (uid=0)
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting user-620.slice.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Created slice user-620.slice.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting User Manager for UID 620...
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Starting Session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd-logind[234]: New session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started Session c1 of user lightdm.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: pam_unix(systemd-user:session): session opened for user lightdm by (uid=0)
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Paths.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Paths.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Timers.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Timers.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Sockets.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Sockets.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Basic System.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Basic System.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Starting Default.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Reached target Default.
Jun 08 08:51:08 Ira-Lenovo systemd[275]: Startup finished in 78ms.
Jun 08 08:51:08 Ira-Lenovo systemd[1]: Started User Manager for UID 620.
Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Activating service name='org.a11y.atspi.Registry'
Jun 08 08:51:10 Ira-Lenovo org.a11y.Bus[284]: Successfully activated service 'org.a11y.atspi.Registry'
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Failed to register client: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
Jun 08 08:51:10 Ira-Lenovo org.a11y.atspi.Registry[290]: ** (at-spi2-registryd:293): WARNING **: Unable to register client with session manager
Jun 08 08:51:15 Ira-Lenovo lightdm[246]: ** (process:297): WARNING **: Error getting user list from org.freedesktop.Accounts: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Accounts was not provided by any .service files
Jun 08 08:51:15 Ira-Lenovo lightdm[272]: pam_unix(lightdm-greeter:session): session closed for user lightdm
Jun 08 08:51:15 Ira-Lenovo lightdm[297]: pam_unix(lightdm:session): session opened for user ira by (uid=0)
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting user-1000.slice.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Created slice user-1000.slice.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting User Manager for UID 1000...
Jun 08 08:51:15 Ira-Lenovo systemd[302]: pam_unix(systemd-user:session): session opened for user ira by (uid=0)
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Starting Session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd-logind[234]: New session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started Session c2 of user ira.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Paths.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Paths.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Timers.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Timers.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Sockets.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Sockets.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Basic System.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Basic System.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Starting Default.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Reached target Default.
Jun 08 08:51:15 Ira-Lenovo systemd[302]: Startup finished in 36ms.
Jun 08 08:51:15 Ira-Lenovo systemd[1]: Started User Manager for UID 1000.
Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Jun 08 08:51:18 Ira-Lenovo systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Jun 08 08:51:18 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Jun 08 08:51:18 Ira-Lenovo systemd[1]: Started RealtimeKit Scheduling Policy Service.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully called chroot.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully dropped privileges.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully limited resources.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Watchdog thread running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Canary thread running.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 328 of process 328 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 08 08:51:18 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 1 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 332 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 2 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 333 of process 328 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Jun 08 08:51:19 Ira-Lenovo rtkit-daemon[329]: Supervising 3 threads of 1 processes of 1 users.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module-gconf.c: Unable to read or parse data from client.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] module.c: Failed to load module "module-gconf" (argument: ""): initialization failed.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] main.c: Module load failed.
Jun 08 08:51:19 Ira-Lenovo pulseaudio[328]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-odf-thumbnailer.so": libgsf-1.so.114: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-poppler-thumbnailer.so": libpoppler-glib.so.8: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-raw-thumbnailer.so": libopenrawgnome.so.1: cannot open shared object file: No such file or directory
Jun 08 08:51:21 Ira-Lenovo org.freedesktop.thumbnails.Thumbnailer1[311]: (tumblerd:351): tumbler-WARNING **: Failed to load plugin "tumbler-ffmpeg-thumbnailer.so": libffmpegthumbnailer.so.4: cannot open shared object file: No such file or directory
Jun 08 08:51:22 Ira-Lenovo kernel: fuse init (API version 7.22)
Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounting FUSE Control File System...
Jun 08 08:51:22 Ira-Lenovo systemd[1]: Mounted FUSE Control File System.
Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Successfully made thread 392 of process 392 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 08 08:51:22 Ira-Lenovo rtkit-daemon[329]: Supervising 4 threads of 2 processes of 1 users.
Jun 08 08:51:22 Ira-Lenovo pulseaudio[392]: Daemon already running.
Jun 08 08:51:23 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Jun 08 08:51:23 Ira-Lenovo systemd[1]: Starting Disk Manager...
Jun 08 08:51:24 Ira-Lenovo udisksd[401]: udisks daemon version 2.1.3 starting
Jun 08 08:51:24 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Jun 08 08:51:24 Ira-Lenovo systemd[1]: Started Disk Manager.
Jun 08 08:51:24 Ira-Lenovo udisksd[401]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Jun 08 08:51:25 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Jun 08 08:51:25 Ira-Lenovo systemd[1]: Starting Daemon for power management...
Jun 08 08:51:26 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.UPower'
Jun 08 08:51:26 Ira-Lenovo systemd[1]: Started Daemon for power management.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): carrier now ON (device state 20)
Jun 08 08:51:26 Ira-Lenovo kernel: r8169 0000:06:00.0 enp6s0: link up
Jun 08 08:51:26 Ira-Lenovo kernel: IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 40]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Auto-activating connection 'Wired connection 1'.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) starting connection 'Wired connection 1'
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTING
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) scheduled...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) started...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) scheduled...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 1 of 5 (Device Prepare) complete.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) starting...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: prepare -> config (reason 'none') [40 50 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) successful.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) scheduled.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 2 of 5 (Device Configure) complete.
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) started...
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: config -> ip-config (reason 'none') [50 70 0]
Jun 08 08:51:26 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
Jun 08 08:51:26 Ira-Lenovo upowerd[427]: (upowerd:427): UPower-Linux-WARNING **: Setting /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0e/PNP0C0A:00/power_supply/BAT1 state empty as unknown and very low
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> dhcpcd started with pid 440
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Beginning IP6 addrconf.
Jun 08 08:51:27 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 3 of 5 (IP Configure Start) complete.
Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.ModemManager1' unit='dbus-org.freedesktop.ModemManager1.service'
Jun 08 08:51:27 Ira-Lenovo dbus[235]: [system] Activation via systemd failed for unit 'dbus-org.freedesktop.ModemManager1.service': Unit dbus-org.freedesktop.ModemManager1.service failed to load: No such file or directory.
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: version 6.3.2 starting
Jun 08 08:51:28 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed nbi -> preinit
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: DUID 00:01:00:01:1a:27:1d:43:1c:75:08:53:82:9a
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: IAID 08:53:82:9a
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: soliciting an IPv6 router
Jun 08 08:51:28 Ira-Lenovo dhcpcd[440]: enp6s0: rebinding lease of 192.168.1.13
Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: leased 192.168.1.13 for 3600 seconds
Jun 08 08:51:34 Ira-Lenovo dhcpcd[440]: enp6s0: adding route to 192.168.1.0/24
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): DHCPv4 state changed preinit -> bound
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> address 192.168.1.13
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> prefix 24 (255.255.255.0)
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> gateway 192.168.1.1
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '192.117.235.235'
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> nameserver '62.219.186.7'
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
Jun 08 08:51:34 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) started...
Jun 08 08:51:35 Ira-Lenovo dhcpcd[440]: enp6s0: removing route to 192.168.1.0/24
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: ip-config -> secondaries (reason 'none') [70 90 0]
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 5 of 5 (IPv4 Commit) complete.
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> NetworkManager state is now CONNECTED_GLOBAL
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Policy set 'Wired connection 1' (enp6s0) as default for IPv4 routing and DNS.
Jun 08 08:51:35 Ira-Lenovo NetworkManager[233]: <info> Writing DNS information to /usr/bin/resolvconf
Jun 08 08:51:36 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) successful, device activated.
Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service'
Jun 08 08:51:36 Ira-Lenovo systemd[1]: Starting Network Manager Script Dispatcher Service...
Jun 08 08:51:36 Ira-Lenovo dbus[235]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jun 08 08:51:36 Ira-Lenovo systemd[1]: Started Network Manager Script Dispatcher Service.
Jun 08 08:51:41 Ira-Lenovo dhcpcd[440]: enp6s0: no IPv6 Routers available
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> (enp6s0): IP6 addrconf timed out or failed.
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) started...
Jun 08 08:51:48 Ira-Lenovo NetworkManager[233]: <info> Activation (enp6s0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Jun 08 08:51:59 Ira-Lenovo su[587]: (to root) ira on pts/0
Jun 08 08:51:59 Ira-Lenovo su[587]: pam_unix(su:session): session opened for user root by ira(uid=1000)

See https://bbs.archlinux.org/viewtopic.php?id=182030
Here's the change you recently applied: https://projects.archlinux.org/svntogit … 882c43178c.

Problem with auto start-stop script

Hi to All,
Logged as root. I have create in /etc/rc.d/init.d this file and saved as dbora (Oracle Linux 5.4):
+#!/bin/sh+
+# chkconfig: 345 99 10+
+# description: Oracle auto start-stop script.+
+#+
+# Set ORA_HOME to be equivalent to the $ORACLE_HOME+
+# from which you wish to execute dbstart and dbshut;+
+#+
+# Set ORA_OWNER to the user id of the owner of the+
+# Oracle database in ORA_HOME.+
ORA_HOME=/u01/app/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
+if [ ! -f $ORA_HOME/bin/dbstart ]+
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
+'start')+
+# Start the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbstart $ORA_HOME"
touch /var/lock/subsys/dbora
+;;+
+'stop')+
+# Stop the Oracle databases:+
+# The following command assumes that the oracle login+
+# will not prompt the user for any values+
su - $ORA_OWNER -c "$ORA_HOME/bin/dbshut $ORA_HOME"
rm -f /var/lock/subsys/dbora
+;;+
esac
After creation I have execute:
*#chmod 750 /etc/rc.d/init.d/dbora*
*#chkconfig --add /etc/rc.d/init.d/dbora*
The last command return this message:
+"service dbora does not support chkconfig"+.
Can You help me? Have You an idea ?
Thank You and best regards
Gaetano

sb92075 wrote:
Oracle RDBMS needs to be started by process running at OS level as owner of Oracle software; typically OS user "oracle" & not as ROOT!Ok,
But I have founded this script at [http://www.oracle-base.com/articles/linux/AutomatingDatabaseStartupAndShutdownOnLinux.php].
The article report:
Article
When using RAC or ASM under Oracle 10g Release 2 or above, the Oracle Clusterware automatically starts and stops the Oracle database instances, so the following procedures are not necessary. For all other cases, you can use the methods described below.I must suppose, that the author has written an incorrect article?
Best Regards
Gaetano

DB and listner auto start with linux problem

Dear all :
i can't set DB auto start with linux
my db version 10g linux 5
I followed these steps :
edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.
TSH1:/u01/app/oracle/oracle/product/10.2.0/db_1:Y
create a file called "/etc/init.d/dbora" as the root user, containing the following.
#!/bin/sh
# chkconfig: 345 99 10
# description: Oracle auto start-stop script.
# Set ORA_HOME to be equivalent to the $ORACLE_HOME
# from which you wish to execute dbstart and dbshut;
# Set ORA_OWNER to the user id of the owner of the
# Oracle database in ORA_HOME.
ORA_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
ORA_OWNER=oracle
if [ ! -f $ORA_HOME/bin/dbstart ]
then
echo "Oracle startup: cannot start"
exit
fi
case "$1" in
'start')
# Start the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl start"
su - $ORA_OWNER -c $ORA_HOME/bin/dbstart
'stop')
# Stop the Oracle databases:
# The following command assumes that the oracle login
# will not prompt the user for any values
su - $ORA_OWNER -c $ORA_HOME/bin/dbshut
su - $ORA_OWNER -c "$ORA_HOME/bin/lsnrctl stop"
esac
chmod 750 /etc/init.d/dbora
chkconfig --level 345 dbora on
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc3.d/S99dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/K01dbora
# ln -s /etc/init.d/dbora /etc/rc.d/rc5.d/S99dbora

Follow this part of Oracle Doc,
Automating Shutdown and Startup
http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref249
Also run your script manually see if it will run sucessfully.
/etc/init.d/dbora start
/etc/init.d/dbora stop

HT4539 Is there any way to auto-start the Apple mail app?

Our company offers a 7/24 service where a user can leave a voice mail in our system and our mail server will send an urgent mail message to the iPhone of the employee on duty so it can be handled in a timely manner. The problem we are having is that if someone turns off their phone and starts it again (or if the user opens the running apps window and shuts down the mail app), the users are not getting those urgent emails.
While I understand having an auto-starting app would be undesirable, since every developer might start activating that feature, does Apple iOS6 have any way to tell the mail app to restart on iPhone boot? We have a few people using other smartphones with a competing O/S that sounds similar to "asteroid" ;-) and the mail appears to be always operational, even if you shut down the app.

And be sure to set up Notifications for mail so the phone will beep, buzz, flash, whatever when a message comes in.
One issue though (discussed elsewhere): the phone will only Notify once. If you didn't hear or see it, there won't be any further warning (unlike, say, Blackberry's flashing LED). You're gonna have to grab the phone and at least bring up the lock screen to see if there are any notifications queued up.

Auto Starting E530c and E545 laptops

I have been trying for ages to get both of these models to auto start for updating purproses. These machines are stored in a cart so no matter what route I took, I enabled them to stay on even when the lid was closed. This cart is wired with network and power to each laptop as well. The routes I have taken:
1. Wake on Lan. At best this works 20% of the time. I set each laptop up, test it and then put it back into the cart. Once the cart is full, I do a full WoL test and every single unit turns on. I leave for the night and let the scheduled task try to turn the laptops on overnight... most don't. I have been pulling my hair out, changing settings all over the place but it always works in limited tests but then never works in mass.
So I looked into other options:
2. RTC Alarm (aka: Auto power on at a certain time in bios)... but this setting is not in the bios. At least, I can't find it. If it is there, please let me know. There is a good chance I am blind!
3. I would even take just auto turn on when AC power is plugged in. Again though, I can't find any option in the bios for either unit.
So... is there some secret setting to making WoL work all the time? Is there a RTC alarm setting in bios? Is there an auto turn on when AC power in bios? Any of those solutions would work for me!
Thanks!

I was wondering if was something to do with VLANs being mucked up, since I only use 4 (it tells me I can't use more than four if I try to use more), plus it used to all work until a power interuption.. hah!
would removing vlan.dat then a reload force the router to re-write without any suspected problems ?
I've just pulled off all the encryption, and vlan3 works, but simple wep back on... and the client can't see the dhcp-offer going back....

Auto Start/Stop Oracle Database Lintener DBConslone on Linux

Dear all
I have install oracle 10.2.0 on redhat 4.7 every time i have to start manualy.
it try with following scrip / process but database not starting automatically.
Please any one can provide steps for auto start and stop oracel services on RedHat 4.7
Once the instance is created, edit the "/etc/oratab" file setting the restart flag for each instance to 'Y'.
TSH1:/u01/app/oracle/product/10.2.0:Y
Next, create a file called "/etc/init.d/dbora" as the root user, containing the following.
#!/bin/bash
#chkconfig: 345 95 10
#description: init script to start/stop oracle database 10g, TNS listener, EMS and isqlplus
case $1 in
     start)
     su - oracle -c 'lsnrctl start'
     su - oracle -c 'dbstart'
su - ora10g -c 'isqlplusctl start'
     su - oracle -c 'emctl start dbconsole'
     stop)
su - oracle -c 'emctl stop dbconsole'
     su - oracle -c 'isqlplusctl stop'
su - oracle -c 'dbshut'
su - oracle -c 'lsnrctl stop'
     restart)
su - oracle -c 'emctl stop dbconsole'
     su - oracle -c 'isqlplusctl stop'
su - oracle -c 'dbshut'
su - oracle -c 'lsnrctl stop'
     su - oracle -c 'lsnrctl start'
     su - oracle -c 'dbstart'
su - ora10g -c 'isqlplusctl start'
     su - oracle -c 'emctl start dbconsole'
esac
create service on linux
Actions >> System Settings >> Server Settings >> Services Then
Actions >> Add Service Then
Service Name = dbora Then Press Ok
chmod a+x /etc/init.d/dbora
Check is it running this service properly
service dbora stop
service dbora start
showing error
:bad interperter : no such file or directory
Please forward me process/steps for auto start/stop oracel services

:bad interperter : no such file or directorymeans that it could not find the interpreter which should be used to interpret the script.
most probably this is caused by the shebang (#!/bin/bash)
the default location of bash on RHEL (OEL/CentOS) is /bin/bash, which means that the shebang looks correct.
can you make the shebang:
#!/bin/bash -xso shelltracing is put on and execute script again?
this will make clear if it is the shebang in your script, or in another script.

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

Auto Start/Shutdown db on Linux (RHEL-4)

Hello,
I have posted a thread in Database General forum :
Auto Start/Shutdown db on RHEL 4
and there one suggestation i got that i have to raise my problem here itself only.
Kindly look into the issue and help me.
Thanks & Regards
Girish Sharma

I see you start this service at sequence "99". This is good, but there are other 99-level startup scripts as well. These are processed in alphabetical order. Do this:
$ ls /etc/rd5d.d/S99*
So, "dbora" will run even before rc.local and that may not be a good thing.
Also, checking:
$ ls /etc/rc5.d/K* | head -n15
will show you the order in which services are shut down, again in alphabetical order.
These steps may help:
# /sbin/chkconfig dbora off
# /sbin/service dbora stop
# cd /etc/init.d/
# /sbin/chkconfig --del dbora
# mv dbora xxx-dbora
# vi xxx-dbora
# /sbin/chkconfig --add xxx-dbora
# /sbin/chkconfig xxx-dbora on
# /sbin/service xxx-dbora start
What we are doing is:
1) Remove existing dbora service
2) Rename the service to something that shows last in an ls(1) command
3) Edit the xxx-dbora script to change the chkconfig info from "99 10" to "99 01"
4) Installed the service.
Now, the start-up is done as the very last action and shutdown as the very first.
Does this make any difference?

Music auto start on Bluetooth iOS

I have experienced a problem with Music on my iPhone (4,5 & 6) auto starting when I connect it to my Bluetooth device (Acura TL, Bose speakers, etc.). This is not isolated to the car and appears to be an issue with my iPhone and not the Bluetooth device. Especially given it happens on all my Bluetooth devices. I have tried to delete songs on the phone and stop Music/iTunes from accessing data, and nothing seems to work.
Another unusual thing is that Music seems to pull the songs from iTunes even though I've stopped the data usage for both programs. How the heck is it still playing music with both programs forbidden to use data???????
Any help is greatly appreciated!

I know that Music APPS can do this from time to time when Bluetooth headsets are involved. e.g., WinAmp had this issue at 1 time whereby it would "take over" any Bluetooth connection so that pressing the PLAY button on my headset would start my last WinAmp song -- even though I was listening to another APP at the time - like TuneIn Radio or iHeartRadio. This resulted in both playing at the same time.
Maybe take a look at which Music APP you have installed and uninstall it and test for a few days? (which one(s) did you install?)

Auto start listener & DB in Linux

Hello, I have installed oracle 10g on Red Hat 2.1 Ent. Ed. I have also modified the /etc/oratab file for auto starting the service. The service start auto but i have two problems, 1) The listener does not start automatically 2) When trying to connect from SQL*PLUS, it says Shared Memory Realm does not exists. The Database has to be started manually connecting sys as sysdba. How can i configure the two things to start automatically? Any idea? Thanks.

Follow steps at the end of this article:
http://www.oraclebase.com/articles/9i/Oracle9iInstallationOnRedHat21.php
Script will start DB automaticaly during boot and also stops database during OS shutdown.

Nokia 9500 - Bluetooth auto start!

The bluetooth on my Nokia 9500 auto starts from time to time even though is switched off in the Settings menu.

All Right Mobile Maniac.
I have seen another discussion re the log file problems with the same effects on the phone performance. I am wondering how many are bothered about this matter and how many report it. Most of us do not bother to waste time on a discussion board, but think on how quick to make the next buck... Most of us will return the phone to the shop, upgrade or chop it away and get a different model. It is only few of us who realy wonder why this thing happens or the other does not with a phone or anything else. I have not tried the 5-10 days time lenght for the log file, but I'll do it in the future and come back to the forum with the results. The firmware version of my phone is: v 05.22(01) 03-06-2005 RA-2. Is there an update? How do I update it?
Thanks,
Julian

CRS on Redhat 5 auto-start problem

Similar Messages

Maybe you are looking for