Crystal Report 10 take toomuch time to display report

hi every one
i have designed some reports with crystal report 10. i am using classic ASP
and windows 2003 Enterprise server as web server. The problem is that when i browse the report in Internet explorer, it takes too much time to display the report, and many times it does not display the report giving simply the message "the page cannot be displayed" 500 HTTP internal error. i am using SQL server 2000 SP4 as data source. when i use Access it disp[lay the report but take too much time to display the report.
pls help me
thanks

All I can do is provide suggestions (CR 10 has been out of any support for over 4 years now...).
Make sure you are using the latest updates - both on your dev and on the deployed server. Search for the updates here:
http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm
You also need to consider "too much time to display the report". As compared to what? E.g.; how is the performance with the same database, dataset, etc, in the CR designer? The performance at runtime will never be better than the designer.
You may also want to experiment with different database connections (OLE DB, ODBC, Native) and different DB clients.
Finally, see the following for tips on how to improve performance:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d08468e2-a81d-2b10-faa9-9837f58ee1c2?quicklink=index&overridelayout=true
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/208edbbf-671e-2b10-d7b5-9b57a832e427
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b
The above is written for the CR SDK for .NET, but the same tips will apply to your solution
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Similar Messages

Payables Account Analysis report takes long time to produce xml output

Hi,
I am trying to get xml data for the Payables Account Analysis report. I have changed the output format of the concurrent program to XML.
The report takes long time to produce the xml data irrespective of the number of rows fetched. But the same report with Text output runs very fast.
Any reason why the xml output takes long time?
thanks in advance
Malathi.

Hi,
Thanks for the reply.
As mentioned above, i deleted the Q_FLEXDATA and ran the report. it takes less time.
But Will the report data not affected when we delete Q_FLEXDATA Group? and Why this flexdata group affects the running time?
Thanks,
Malathi.

Concurrent report takes long time to complete

Dear all,
Concurrent report "Inactive items report" takes long time to complete.
How to solve this performance issue ?
Kindly offer me solution to this.
Regards,
Arun

Please post the details of the application release, database version and OS.
Was the performance acceptable before? If yes, any changes been done recently?
Do you have the statistics collected up to date?
Please enable trace and generate the TKPROF to determine why the request takes that long to complete.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Slow+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Slow+AND+Concurrent+AND+TKPROF&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Crystal Reports version 10 error when displaying report

Hello: New member here, been lurking around for a while. A lot of good information here.
I do hope this is the right place to ask this first question. I have a customer that has a Crystal Reports 10 installation and cannot display reports since he upgraded from Crystal report 8 to Crystal reports 10
The error he gets is pop message:
CRAXDT error Occurred on Server Error Number: -2147221005 Error description: 006ASP 0177Server
CreateObject Failed~800401f3
Connection to the database is good we checked with query using SQL.
Let me know what you think I should check next.
I appreciate it.
Thanks
Damon

1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
Symptom
A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
"CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
Resolution
It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

Oracle9i reports take longer time while running in web

Hi,
I have developed few reports in Oracle9i and I am trying to run the reports in web. Running a report through report builder takes lesser time compare to running the same report in web using web.show_document. This also depends on the file size. If my report file size(.jsp file) is less than 100KB then it takes 1 minute to show the parameter form and another 1 minute to show the report output. If my file size is around 190KB then the system takes atleast 15 minutes to show the parameter form. Another 10 to 15 minutes to show the report output. I don't understand why the system takes long time to show the parameter form.
I have a similar problem while opening the file in reports builder also. If my file size is more than 150KB then it takes more than 15 minutes to open the file.
Could anyone please help me on this.
Thanks, Radha

This problem exists only with .jsp reports. I saved the reports in .rdf format and they run faster on web now. Opening a .jsp report takes longer time(file with 600KB takes atleast 2 hours) but the same report in .rdf format takes few seconds to get opened in reports builder.

Take more time while running report on live

report takes more time to open on live. while running manually by connecting to live it run (means first pages generate with in 4 sec) but when i click to next page it tooks 3-4 sec.
thers's only two formula column.
please advice me to make it run smooth. waiting for ur response.
Regards

May i know which version u are using
and hw many records does it has to fetch.?

SQL Report Viewer Web Part Not displaying Report

I have just completed updating an old report using report builder 3.0. I have added it to SharePoint Designer but have not replaced the old report file.
Any help is greatly appreciated!!
All I did was export the old report from sharepoint designer to my desktop. Then opened it with Report Builder 3.0- made changes to the report and saved it with a different name (for safety in case i break things) and then upload it back to the same place where
the old report was located using SP Designer. I then went back to the site in sharepoint that is displaying the old report, and changed the URL path in the SQL report viewer to the new report.
Now the SQL Report Viewer web part isn't showing anything (blank)

Dear Form Moderator,
This question is already asked in sharepoint forum so please don't move this sharepoint forum. Here is link of thread:
https://social.technet.microsoft.com/Forums/en-US/3796da85-fbb4-4722-a5d0-724859f7d4ae/sql-report-viewer-web-part-not-displaying-report?forum=sharepointgeneralprevious
Here is the one more duplicate thread link in same forum. So either you can merge both OR delete one.
https://social.technet.microsoft.com/Forums/en-US/259d2586-ed4a-4f47-a808-877d4621d9f2/report-builder-30-sql-report-viewer-web-part-not-displaying-report-in-sharepoint?forum=sqlreportingservices
[SharePoint Forum Moderator]
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Report takes too long to display

Post Author: NGCMatt
CA Forum: Publishing
I am using Crystal XI, Vsual Studio 2003, SQL Server 2000 and Windows Server 2003. I create a report in Crystal and then add it to my Visual Studio 2003 project. Then using the CrystalReportViewer in Visual Studio 2003 I create a webpage then stick in the CrystalReportViewer on the page then add all the properties and other code in the code behind page. Like a close button on the page so when the user clicks on the close button the crystal report page closes and goes back to the home page.
When I run the report from my developement machine the report displays in less than 5 seconds and when the close button is clicked the crystal reports page closer in less than 2 seconds and returns to the home page.
But after I deploy by web app to the server and try to run a report it ALWAYS takes longer than 40 seconds to display and even longer to close. This is driving my customers crazy.
What am I missing??????
Thanks for the help.
Matt

Is it possible the java memory is not high enough on the service (assuming Windows). Try to Set the JVMOption to -Xmx1024m (default is 512m) on the "HyS9WebAnalysis" registry entry under HKEY_LOCAL_MACHINE\SOFTWARE\Hyperion Solutions\WebAnalysis

Reports take more time

hello experts,
i am using report builder(10g).i am working on a report.the report is ok but it takes more time to run.
.i already created indexing in columns but yet not its sufficient to improve the performance
so pls help me to improve the performance of my report.
Thanks And Regards]
Ravi

964900 wrote:
hello experts,
i am using report builder(10g).i am working on a report.the report is ok but it takes more time to run.
.i already created indexing in columns but yet not its sufficient to improve the performance
so pls help me to improve the performance of my report.
Hi Ravi
NO one can help you without giving idea.
first idea you already done.
secondly test your query with explain plan. How to run ?
explain plan for <your query>;
select * from table(dbms_xplan.display);more read SQL and PL/SQL FAQ
Lastly you can not get very good help from this forum. Better close it and post @ PL/SQL
Hope this helps
Hamid
Mark correct/helpful to help others to get right answer(s).*

Report takes long time for few records

hi frends,
I m facing one problem with my Web based erp application which is developed in .net , in my application when i open the report from my applicaiton , in my temp folder there one file gets created name is "rpt conmgr cache"
bcoz of this for few records also my report takes too much time and opens very slow and it takes long time, and it happens in some of the reports only , other reports are working cool and its not creating any file in temp folder,,, so can u guide me whats this file and what can be the solution for it,
Thanks
Mithun

hi sabhajit,
i have already checked the sql query it is taking less then seconds.
any other steps u want me to check then pls let me know?
thanks mithun

Report takes long time to refresh

Hi Experts ,
I have an issue ,when I have only used one workshet to upload as the original workbook has about 25 worksheet tabs and is too large to upload.The report takes 20 minutes to refresh I was rebuilding the report when I noticed that when I added the formulas to the bottom to the original report the report started to take longer to run.When the bottom section of the report is not included the report refreshed in about 2 minutes.
In the file that completes faster,there are no formulas after line 353
In the file that takes long time o refresh,the start on line 357.When the bottom section of the report is not included the report refreshed in about 2 minutes.Any sugession.Thanku.
Regards
R@vi

hi,
If you discover significant high frontend time, check whether the formatting is the reason. If so, either switch it off or reduce the result lines.
As formatting information is not transferred, the time consumed in the frontend can be reduced.
But the workbook you are executing may obviously take much time.
Message was edited by: AVR - Intelli

Webi report takes long time to open

Hi All.
We have created few reports in webi and we have used variables in these reports.
But while opening that reports into BI Launch pad browser, it is taking long time to open. e.g. 5 to 7 min or more.
Please help to resolve this issue.

Hi Anand R,
A couple of questions from my side:
1) Does the webi report contains any chart
2) Are webi reports which are slow only on a single .UNX
3) How about the network.
4) Are you using IE
5) Are you in 3.x or 4.x
Could you try any of the below:
1) Increase Tomcat memory pool to 4096Mb
2) Stop and restart Tomcat once.
3) Try with other browser
4) Use something like Fiddler to understand the network speed
5) Delete cookies in the browser
Try the other options told by our SCN colleagues aswell..
BR
Prabhith

Report takes long time to loadq

Hello,
I am a developer and have to analyse the behaviour of CR concerning a certain report: It takes about 7 seconds to load this report into the designer and I am wondering, what could cause this delay. Just to make sure: I am not talking about rendering the report (which might include heave database activity in order to acquire the data), but only the time it takes for the CR designer(?) to prepare.
The report represents a data sheet (single page) with 7 subreports showing optional additional data (1-5 rows with 3 cols each). I would not consider the report to be extremly complicated and a similar design in other report generators loads within 1/10 of a second.
Although I am using the programming interface I can verify this behaviour using the trial version of CR XI SR 2:
When selecting the report to load into the designer, it takes approx 7-8 seconds before the designer appears.
Is there anything I can do about this strange behaviour? This delay results in having the customer to wait for quite a while before previewing just one simple data sheet... Not a nice scenario
Thanks and greetings from Berlin, Germany

Hi Sharon,
Yes it is correct. I am talking about the designer, and NOT the preview (I would accept delays and look in the query).
The subreport's queries (one table for each subreport) is linked to the main dataset via its 'ID'...
The table structure is similar to this:
Main: MainData (PK : ID);
SubReport1: DetailData1 (Linked via 'MainID' to the MainData)
SubReport2: DetailData2 (Linked via 'MainID' to the MainData)
I am not a CR expert, but as far as I can see from the report layout, the subreports are designed as 'group'. When I try to display the subreport's query, I am asked for the 'MainID'. So I assume it is generated using the 'Add group'.
Unfortunately, I cannot monitor the DB activity, as the source database is FireBird and I don't have any monitoring tools. Would there be any DB activity prior to previewing the report?
Oh, thanks for your patience

Why HTML report takes more time than the PDF one?

Hi,
I have created report in Reports 6i. When I run the report on the web with FORMAT = PDF it runs very fast and shows all the pages in 2 minutes. But when I run with
FORMAT = HTML it shows the first page in 2 minutes, after that it takes lot of time to show the remaining pages. If the total pages are more than 40, the browser just freezes
Can somebody give me the reason?
Is there any way to rectify this?
Thanks alot.
Ram.

Hi Senthil,
Iam running with the below parameters.
Format : HTML
Destination : Screen.
My default browser is IE. When I try to run using Netscape it showed only 1 page out of 34 pages.
When I run Format as PDF it is faster but font size is small when it opens up. Offcourse user can zoom it.
If I increase the report width from 11 to 14 the font size becomes very small when it open up in browser.
Is there any way that I can set up zoom when I run as PDF?
Thanks for your help.
Ram.

Report takes long time in different database version

Dear Mates,
I have been in serious problem from last one month. Still i don't get any solution. Come to the problem.
I have a program where, database version is *9i R2*. Here one report are base on a database function and works perfectly. It takes 30/35 seconds to preview.
I take this schema backup by EXP command and import it to database version XE and also database version *10G R2* with IMP command. import is successful. Others report still preview as it is at 9i. But my mentioned reports didn't come as same. Now it takes 3 Hrs. :(.
I run explain plan and the out put is bellow. What should i do now ? If you want to check the query i can also post it. If any one have experience regarding this, please help me.
Plan hash value: 3745590339
| Id | Operation                      | Name        | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT               |             | 9454 | 1874K|   207 (55)| 00:00:03 |
|   1 | SORT GROUP BY                 |             | 9454 | 1874K|   207 (55)| 00:00:03 |
|* 2 |   HASH JOIN                    |             | 9454 | 1874K|   205 (55)| 00:00:03 |
|* 3 |    INDEX FAST FULL SCAN        | IND_AD_ID   | 9454 |   120K|   201 (55)| 00:00:03 |
|   4 |    INLIST ITERATOR             |             |       |       |            |          |
|   5 |     TABLE ACCESS BY INDEX ROWID| ACC_DTL     | 1351 |   250K|     3   (0)| 00:00:01 |
|* 6 |      INDEX RANGE SCAN          | IND_AD_FLAG |     8 |       |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("ACC_LEDGER"."LG_AD_ID"="ACC_DTL"."AD_ID")
   3 - filter("ACC_BALANCE"("ACC_LEDGER"."LG_AD_ID",:UNIT,:PROJ)<>0)
   6 - access("ACC_DTL"."AD_FLAG"=6 OR "ACC_DTL"."AD_FLAG"=7 OR "ACC_DTL"."AD_FLAG"=8
              OR "ACC_DTL"."AD_FLAG"=18 OR "ACC_DTL"."AD_FLAG"=19)
Note
   - dynamic sampling used for this statementupper explain plan is from database 10g R2
bellow r from 9i R2
| Id | Operation                      | Name        | Rows | Bytes | Cost |
|   0 | SELECT STATEMENT               |              |       |       |       |
|   1 | SORT GROUP BY                 |              |       |       |       |
|   2 |   CONCATENATION                |              |       |       |       |
|   3 |    NESTED LOOPS                |              |       |       |       |
|   4 |     TABLE ACCESS BY INDEX ROWID| ACC_DTL      |       |       |       |
|* 5 |      INDEX RANGE SCAN          | IND_AD_FLAG |       |       |       |
|* 6 |     INDEX RANGE SCAN           | IND_AD_ID    |       |       |       |
|   7 |    NESTED LOOPS                |              |       |       |       |
|   8 |     TABLE ACCESS BY INDEX ROWID| ACC_DTL      |       |       |       |
|* 9 |      INDEX RANGE SCAN          | IND_AD_FLAG |       |       |       |
|* 10 |     INDEX RANGE SCAN           | IND_AD_ID    |       |       |       |
| 11 |    NESTED LOOPS                |              |       |       |       |
| 12 |     TABLE ACCESS BY INDEX ROWID| ACC_DTL      |       |       |       |
|* 13 |      INDEX RANGE SCAN          | IND_AD_FLAG |       |       |       |
|* 14 |     INDEX RANGE SCAN           | IND_AD_ID    |       |       |       |
| 15 |    NESTED LOOPS                |              |       |       |       |
| 16 |     TABLE ACCESS BY INDEX ROWID| ACC_DTL      |       |       |       |
|* 17 |      INDEX RANGE SCAN          | IND_AD_FLAG |       |       |       |
|* 18 |     INDEX RANGE SCAN           | IND_AD_ID    |       |       |       |
| 19 |    NESTED LOOPS                |              |       |       |       |
| 20 |     TABLE ACCESS BY INDEX ROWID| ACC_DTL      |       |       |       |
|* 21 |      INDEX RANGE SCAN          | IND_AD_FLAG |       |       |       |
|* 22 |     INDEX RANGE SCAN           | IND_AD_ID    |       |       |       |
Predicate Information (identified by operation id):
   5 - access("ACC_DTL"."AD_FLAG"=19)
   6 - access("ACC_LEDGER"."LG_AD_ID"="ACC_DTL"."AD_ID")
       filter("ERP"."ACC_BALANCE"("ACC_LEDGER"."LG_AD_ID",TO_NUMBER(:Z),TO_N
              UMBER(:Z))<>0)
   9 - access("ACC_DTL"."AD_FLAG"=18)
10 - access("ACC_LEDGER"."LG_AD_ID"="ACC_DTL"."AD_ID")
       filter("ERP"."ACC_BALANCE"("ACC_LEDGER"."LG_AD_ID",TO_NUMBER(:Z),TO_N
              UMBER(:Z))<>0)
13 - access("ACC_DTL"."AD_FLAG"=8)
14 - access("ACC_LEDGER"."LG_AD_ID"="ACC_DTL"."AD_ID")
       filter("ERP"."ACC_BALANCE"("ACC_LEDGER"."LG_AD_ID",TO_NUMBER(:Z),TO_N
              UMBER(:Z))<>0)
17 - access("ACC_DTL"."AD_FLAG"=7)
18 - access("ACC_LEDGER"."LG_AD_ID"="ACC_DTL"."AD_ID")
       filter("ERP"."ACC_BALANCE"("ACC_LEDGER"."LG_AD_ID",TO_NUMBER(:Z),TO_N
              UMBER(:Z))<>0)
21 - access("ACC_DTL"."AD_FLAG"=6)
22 - access("ACC_LEDGER"."LG_AD_ID"="ACC_DTL"."AD_ID")
       filter("ERP"."ACC_BALANCE"("ACC_LEDGER"."LG_AD_ID",TO_NUMBER(:Z),TO_N
              UMBER(:Z))<>0)
Note: rule based optimizationEdited by: HamidHelal on Oct 12, 2011 6:42 PM

yes..
SELECT ALL ACC_LEDGER.LG_AD_ID, ACC_DTL.AD_NAME, abs(ACC_BALANCE(ACC_LEDGER.LG_AD_ID, :UNIT, :PROJ) )BAL,
CASE WHEN ACC_BALANCE(ACC_LEDGER.LG_AD_ID, :UNIT, :PROJ)>0 AND ACC_DTL.AD_FLAG IN(6 ,18) THEN
            'RECEIVABLE'
           WHEN ACC_BALANCE(ACC_LEDGER.LG_AD_ID, :UNIT, :PROJ)<0 AND ACC_DTL.AD_FLAG IN(6,18) THEN
            'PAYABLE'
             WHEN ACC_BALANCE(ACC_LEDGER.LG_AD_ID, :UNIT, :PROJ)>0 AND ACC_DTL.AD_FLAG IN(7,8,19) THEN
            'PAYABLE'
            WHEN ACC_BALANCE(ACC_LEDGER.LG_AD_ID, :UNIT, :PROJ)<0 AND ACC_DTL.AD_FLAG IN(7,8,19) THEN
            'RECEIVABLE'
            END AS BALANCE_TYPE,
ACC_DTL.AD_CODE, ACC_DTL.AD_FLAG
FROM ACC_DTL, ACC_LEDGER
WHERE ACC_DTL.AD_FLAG IN (6, 7, 8,18,19)
AND (ACC_LEDGER.LG_AD_ID = ACC_DTL.AD_ID)
AND ACC_BALANCE(ACC_LEDGER.LG_AD_ID, :UNIT, :PROJ)<>0
GROUP BY ACC_LEDGER.LG_AD_ID, ACC_DTL.AD_NAME, ACC_DTL.AD_CODE, ACC_DTL.AD_FLAG
ORDER BY   ACC_DTL.AD_FLAG , ACC_DTL.AD_NAME;here ACC_BALANCE is the database function name..

Crystal Report 10 take toomuch time to display report

Similar Messages

Maybe you are looking for