Crystal Report Key figure formatted value

Hi,
I have restricted key figures defined in my BEx query based on a 'Quantity' type key-figure. I have maintained a display setting for these RKFs restricting to just one decimal place (10.0). Now I am trying to make use of this format setting in my Crystal report built on top of the BEx query by dragging in the 'Key Figure formatted value' node into my report. Although crystal report gives me the formatted value of one decimal place (10.0), it also attaches a Unit symbol next to the value (10.0 KWH)
How do I suppress the Unit of Measure for the measure in my report?
Thanks
SR

HI SR,
If you are not doing any calculatins with this field, then use the following :
Left('10.00',(instr('10.00','.')+1))
Note : replace '10.00' with your field.
Thanks,
Sastry

Similar Messages

Issue with Bex report - key Figures not populating correctly.

Hi Experts,
I am facing an issue with a Bex report. There are three key figures of data type DATE having "Dec - Counter or amount field with comma and sign" datatype. After executing the query, in the report, for some sales documents the key figure fields are coming as 'X' and rest others are coming correctly in the date format as mm\dd\yyyy.
When i check in the cube, these key figures shows values in decimal format and not in date format. The conversion is happening during execution.
Pleas show me some light on how to identify the cause of getting 'X' for some Sales documents in the report eventhough some are coming correctly.
Thanks,
Anamika
Edited by: Anamika Soni on Mar 12, 2010 10:48 AM

Hi,
The infobject has been defined with datatype "DATE" only. It has also been mapped from datasource to infocube correctly as these key figures are populating correctly for some of the sales documents in the report. It is not like that for all the sales documents the key figures are not converting properly.
Some Sales documents are not converting into the date fields but for some conversion happens properly in the BEx report. This is the issue.
Please guide accordingly.
Many thanks,
Anamika

Key figure Period Value TC has a difference of 123,445- IDR in roundingstep

Hi,
Pls suggest some tips, to resolve this, as I am struck in Currency Translation;
Diagnosis
While checking the rounding conditions for key figure Period Value TC a difference of 123,445- IDR was found in step Balance Sheet.
System Response
The data will not be rounded.
Procedure
Examine the data to be rounded with regards to the key figure to be checked, Period Value TC. Check whether the rounding condition has been met for this key figure.
Make sure that the check looks at the total balance of posting levels 00, 01, and 10 (as opposed to the rounding algorithm, which rounds each posting level separately).
If the same message (with different differentials) appears elsewhere, please note that the check is performed for each subassignment value of those subassignments that have a selected default indicator in the differential account assignment. In this case, check the customizing settings for method step Balance Sheet.
Regards
CSM Reddy

Hi CSM Reddy,
The content of this forum is rather rich and contains a lot of questions and solutions given already.
So, I'm kindly remind you about searching functionality.
You could find, for example, this link:
SEM-BCS: Currency translation
A little remark. Disbalance may occur because of different reasons. So, first of all try to run the RFD validation. If the validation does end with errors, especially an error on the check that compares RE in B/S and NI in P&L, run the reclass (2nd one) mentioned in the link.
If such a check is green, then go for another reclass (the 1st in the link) which will round the balance. Usually, I run it in a test mode first, in order to see how much differences the system discovered. If they are not material, I round them. If they are, then it'd better to investigate the reason.
Hope this helps.
Edited by: Eugene Khusainov on Sep 23, 2008 12:12 PM

Problems in exporting crystal report to word format

Hi All,
I am getting trouble in exporting crystal report to word formats.
Here are my questions:
1) The exported word file will have a text "R..950" added on top right hand corner, How to get rid of it?
2) For those "Can Grow" fields, it can show multiple line data correctly in the viewer. However, the text box in exported word file will be too small to show all the content and lower half of the text is cut.
Thanks and Regards,
Cherry

Hi Asha,
Thanks for reply.
The version of crystal report designer and viewer which I am using is version 11 Release 2.
Besides, I guess it might relate to the format of report so I would like to tell you more.
Font Face: Arial Unicode MS (in order to show chinese characters)
Font Size: 9 pt
For the text "R..950" issue, I just found that some people in the internet having the same issue and they suggested that may relate to the locate. In my case, the locate is Chinese (Hong Kong S.A.R.).
If it is necessary, I may send you my report with sample for test.
Regards,
Cherry

Java application export output file of Crystal Report in .TXT format

Hi,
I have a Java application which is able to export the output file of Crystal Report in PDF format. But I'm trying to change the export file to .TXT format. Is this possible? I'm using Crystal Report XI. Is there any available updates or fixes to solve this? Please advice.
Thank you

I've tried, but I have an error
frm-40735: when button-pressed trigger raised unhandled exception ORA-06502
ORA-06502 when I try write a text field to the file the text field in question is a date.
Did a similar problem ever occured to you?

Populate key figure attributes values for material & location in inventory

Hi all,
We have a Inventory Infocube. the dimensions of the inventory infocube contains material, location and material-location and also the time dimension with calday, week and month. The different key figures in the infocube are Unrestricted Stock Balances, Unrestricted Stock Receipts, Unrestricted Stock Issues, QI Stock Balances, QI Stock Issues, QI Stock Reciepts, Blocked Stock Balances, Blocked Stock Receipts, Blocked Stock Issues. The following is the definition for master data objects
Material Master - ATTRIBUTES :- Business Unit, Manufacturing Plant, Base to Case Conversion Factor(key figure attribute)
Location Master - ATTRIBUTES:- City, State, Country, Location Type
Material Location master - ATTRIBUTES:- Material, Location, MRP Controller, Source Location, Standard Cost(key figure attribute)
We have a report with material, location, calender day and with all the stock balances keyfigures. also in the report we have the key figure attributes of material master and material location (like standard cost and base to case conversion). We have defined a formula variable on these attribute key figures with replacement path.
The problem is none of the records are getting populated with the standard cost and base to case conversion.
We are NOT doing any conversion at the report level.
Any help is greatly appreciated.
Regards
Vijay

There could be few possibility:
1. The variable you are inputting for standard cost and base to case conversion may not have any values in the master data.
2. See the master data table for Material and location. Note down those materails and location for which there are values for standard cost and base to case conversion. Now, run the reports for these materials
and location.
Btw, have made standard cost and base to case conversion as nav attributes. Plz make them nav attributes and see.
Thanks...
Shambhu

IP: Best Practice for capturing Key Figure input value in characteristics

Hi Gurus,
we have the requeirement to capture a plannable key figure as a characteristic as well for reporting reasons.
Input in the key figures will be a closed value ist (1 to 5) so no new master data will be created by that in the respective characteristics.
My first guess was an exit characterisic relationship, but obviously it is named "Characteristic Relationship" for a reason, as you cannot not derive values from key figures here.
Any ideas on what would be the best and easiest implementation scenario?
Many thanks in advance,
Tobias

Hi Tobias,
You can derive a characteristic value from a keyfigure using Characteristic relationship of type "EXIT".
Kindly let me know if your issue doesn't get solved using the EXIT type char rel.
EXIT type characteristic relationship:
The valid characteristic combinations and derivable characteristic values are defined by the customer-specific implementation of the specified exit class.
The exit class must implement the interface 'IF_RSPLS_CR_EXIT'. Only these types of classes are offered for editing in maintenance. We recommend that you derive your own class from the example class 'CL_RSPLS_CR_EXIT_BASE'. You then only have to implement the methods u2018CHECKu2019, u2018DERIVEu2019 and u2018CREATEu2019. The class 'CL_RSPLS_CR_EXIT_BASE' itself can be used directly, but it does not execute an action.
Note also the example source code given in the template class; an infrastructure for buffering is provided there, for example.
Regards,
Balajee

Is it possible to display a Bottom 10 on a key figure on values 0 only?

Hi
Is it possible using BEx Query Analyser to display a bottom 10 based on key figure values greater than 0?
I can create a condition which has the Bottom 10 on a Sales Qty key figure, but my problem is that this key figures includes some values of zero and negative values, I want to ignore these.
I have tried creating another condition, values > 0. This works on it's own but not with the Bottom 10.
I appreciate a possible solution would be to do this in data provider but we do not have access to this in our new environment.
Any responses appreciated, thanks in advance
Lloyd Bower

Arun,
Thanks for the reply, unfortunately your suggestion produces the same effect as one of my original ideas (two seperate conditions on same key figure). i.e. it only reports those in the original bottom 10 with have a Key figure qty of >0,
e.g. 3 records, as the other of the original bottom 10 have a key figure qty of 0 or a minus figure.
I'm wanting to achieve a bottom 10 of those records with a key figure above zero.
There are sufficient records in my data with a key figure above 0, for a bottom 10 to be reported.

Key Figure format in Years and Months..

Hi,
Is there any Key figure similar to 0SRVCLENKYF (Length of Service (in Years)) part of Headcount and Personnel Actions, which should give me value in Years and Months..?
Thanks in Advance,
Thanks,
Madhu.

For curiousity sake...if you use the FIMA_DECIMAL_MONTHS_AND_YEARS Function Module, the output that you'll get is a months and years in fractional amounts. So, how are you going to get the Years and Months from this?
For example, if the from date is 20000101 and the to date is 20090914, the results from this Function Module will be Months = 116.42740 and Years = 9.70228. If you do use this, I'd suggest taking the whole number from passed value for years (9 in this example) and then calculate months by taking the franctional amount of the passed value for years and multiple it by 12 (0.70228 * 12), you end up with 9 Years, 8 Months (8.42736 to be exact, but you're going to want to truncate it to 8 so that when it goes above 8.5, the value doesn't become 9 when it still should be 8).

Currency Translation for Key Figures with Value More Than One Currency

Hi...
I have query which display key figure GL Account Balance. The currency that used for this key figure is USD and IDR. How we want display value based on selection screen? So if we input currency USD, all value that use currency IDR translated to USD and all value that use currency USD not changed. Otherwise if we input IDR, all value that use currency USD translated to IDR and all value that use currency IDR not changed.
How we do this in query designer? Thank you.
I have use currency translation :
1. (Right Click Key Figures >> Properties >> Currency Conversion Key)
2. Target Currency Using Variables Entry
but seems the result is not correct. Can anyone help me ?
Regards,
Satria

Hi all,
Thanks for your help, but still I have problem. I have create one currency conversion type, ZXXX. This currency conversion type is using exchange rate type = "M",source curr from Data Rec, sel of targ currency with translation,
and fixed time ref = "Current Date".
Problem:
1. With this setting, i create currency translation in BEx, but the result is not same, it's like the exchange rate not using the same setting with data in ECC (I compare data with transaction fs10N). Is my setting for exchange rate not correct?
2. When I try to display GL Account Balance --> Calculated Key Figure (Total Debet - Total Credit) for period 0, the translation not working. Example if the value is IDR 1234 then the value in USD still USD 1234. Why this happen?
Thank you
Regards,
Satria

Error while exporting crystal report to excel format or word format

i am using vs 2010 and sap crystal report(version 13.0.0.99) for vs 2010. when i export report to excel(97-2003 format) from crystalreportviewer, i am getting error that application has stopped working. I also have ms-office 2007 install on my pc.
when i see eventlog of system i notice following error:
Faulting application name: NBFCForms.exe, version: 1.0.0.0, time stamp: 0x4e170b01
Faulting module name: crxf_xls.dll, version: 13.0.0.99, time stamp: 0x4cc412ac
Exception code: 0xc0000409
Fault offset: 0x0009742e
Faulting process id: 0xc60
Faulting application start time: 0x01cc3e1e5657a4a4
Faulting application path: C:\Users\Harshada\Desktop\NBFCDeploy\NBFCForms.exe
Faulting module path: C:\Program Files\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\crxf_xls.dll
Report Id: f0bae850-aa11-11e0-a98e-0019d144259b

Thanks Roberto and Kalpana.
This link solved the problem:
http://social.msdn.microsoft.com/Forums/en-US/bcf792f4-4da3-4dac-b689-60168e695683/error-internet-explorer-cannot-download-edreportviewerwebcontrolaxd-from-site?forum=vsreportcontrols

When Exporting a Crystal Report to Excel format all of the dates get changed when viewed on Mac version of Excel

We're using Crystal Reports 10 and when we export a report from the Crystal Viewer using either the MS Excel 97-2000 option or the MS Excel 97-2000 (Data Only) option, the date columns on the report appear as expected on a PC version of Excel, however, most of the users at our company use Macs so when they open the same report on the Mac version of Excel all of the dates show up as 2011 or 2012 dates eventhough they are suppose to be 2008 dates. We've tried to just open the report after the export process and then do a "Save As" but get the same result. The date columns all appear to be formatted as Date. The dates on the Crystal Viewer appear as expected when viewed on a Mac. The users are running Excel for Mac OS-X Service Release 1.0. Any idea why this may be happening and is there a solution to this problem? Thanks!

Hi,
To clarify, are you currently using the Mac version of Crystal Reports Viewer 2008 which you downloaded from here?: http://www.sap.com/solutions/sapbusinessobjects/sme/reporting/viewer/index.epx

Crystal Reports 2008 Export formats

We have a full version of Crystal Reports 2008 for use with our .net application. I also tried using the ReportAppServer's .NET assemblies but could not find a way to export to the following formats (this was possible in the previous versions of Crystal Reports)
Excel 8.0
Excel 8.0 Tabular
HTML 3.2
Looks like these are not supoorted with Crystal 2008? Can someone please confirm this?
I came accross a document that suggested use of Excel Export Compatibility patch to support lagacy versions of excel but could not find where to download the patch from.
Also, I did not find any document on what defalt HTML version the crystal viewer exports to. I believe it's HTML 4.0. Is this correct?

Hello,
Install the latest patches for CR 2008, SP2, and you'll find the legacy formats have been added back in for Excel and HTML 3.2 is an option.
Thank you
Don

How to calculate percentage based on key figure maximum value

Hello everybody!
I need your expertise on a query 'issue' I'm facing. Let's say I have a query getting me the Number of Open Items per Week (starting from billing document's Issue Date).
My client wants to be able to see the percentage per week and not the actual number.
So, what I have is below:
Wk"OI Nr"
1 "68.801"
2 "66.288"
3 "59.344"
4 "50.506"
5 "20.950"
And what I want is below (in italics):
Wk"OI %"
1 "100% " (i.e. 68.801 / 68.801 * 100)
2 " 96,34% " (i.e. 66.288 / 68.801 * 100)
3 " 86,25% " (i.e. 59.344 / 68.801 * 100)
4 ......
5 ......
Is it possible to achieve sth like this by altering some key figure properties or in any other way?
Thanks in advance.

First u need to create a calculated Key Fig globally. You can do this at the extreme left end of the query Designer. Just right click on the Calculated key Fig and say New Calculated Key Figure
Give the description of the Key Fig and in the formula section just put the the key fig . 'OI Nr' in you case
When u say ok it will open the properties of the key fig there u can see Enhance>> at the bottom. Click on that make the exception aggregation to maximum and refernce characteristic for the one which u are having the values 68.801, 66.288, 59.344, ..
Save this calculated key fig
now in the Columns create a new selection under the key fig.
drag the newly created calculated key fig in this new selection and say ok.
Now right click on this new selection, go to the Calculated Single Value as drop down and make it Normalize-Sub Totals
Tick the checkbox Also Apply to result
and select Calculate Along Columns.
Save the query and execute. This should solve youe issue
Hope this helps.

Formating issue after export crystal report to excel format

Hi Everyone,
I have a crystal report devloped in crystal 8.5 and i am calling this report from my .net windows application. I have a problem when i export the report in excel format. One of the column size(which is report footer) gets increased because of which my report is not properly formated. I have reoved all the blank lines and extra space but still i am not able to reduce the column size. Any help will be appriciated.
Thanks in advance.

Hi,
Please let us know the Visual Studio Version that you are using, just to inform you, VS2005 is compatible with CRXIR2 and above and VS2008 is compatible with CR2008 + SP0.
Do the report display properly from the designer? Does the Export from the designer in xls works fine?
Thanks,
AG.

Crystal Report Key figure formatted value

Similar Messages

Maybe you are looking for