Crystal Report not running

SAP users are imported into BOE, assigned to the same group.
When I logon to BOE InfoView with user A, I can execute the Crystal Report (built on top of SAP BW Query).
When I logon to BOE InfoView with user B, I can not execute the Crystal Report (built on top of SAP BW Query), followin error:
Error in File Test_Crystal_Report_Finance: Database Connector Error
Both user A and B having the same role, I dont understand why the problem from.
Please help.

Error in File Test_Crystal_Report_Finance: Database Connector Error
The error is generic, but something to do with accessing the database.
If you can execute the CR with User A, and not User B, then obivously it has something to do with thier profile/authorization.
1) In BW ->SU01, check and compare the two user Role and Profile tab.
2) Logon with User A, and execute the BW Query via RSRT.
3) Then logon as User B, and execute the BW Query via RSRT.
Let see what you get with above 3 steps.

Similar Messages

Crystal Report not running from Addon in the Front End.

Dear All ,
There is a Crystal report , .rpt File inbuilt in the Add-on .
This report runs well from the Source Code .
But i am facing problem , since it is not Opening at the Front End after registration of the Add0n.
Suggest what to do ?
Thanks
Ashish

Dear Rahul ,
In my system , there is a Addon , which has some crystal Report file inbuilt .
Which run on the Button Click event in the Form at the Front End (SAP GUI).
When we debug the Source Code and pass the event . . Report Open with no hurdle.
But the Same thing when we do at the From END of SAP , then it is not Returning any Report.
Thanks
Ashish

Crystal reports not running in infoview

Hi ,
Created a report using excel as datasource via odbc DSN. Report runs fine in Crystal but gives an error in Infoview ." database logon information is either incomplete or incorrect"
Have tried every possible way to make it workou but in vain.
Pls suggest any solutions.

Hi Stratos, In your previous reply below
"You have to create the DSN to your excel file also on your BOBJ server as you did on your local workstation. When CR runs in the InfoView it will try to locate the DSN on the BOBJ server. In order to do this correctly please use odbcad32.exe.
Importing the Excel file in the BO repository does not really help. You have to consider to copy the Excel file on your BOBJ server or copy it in a shared drive (which is accessible from both your local workstation and the BOBJ server).
Regards,
Stratos"
I am assuming these are two different methods: In 1st one i will need to make connection to ODBC and in second one it will be Access/Excel (in crystal)
Am I right?

Crystal Report 2008 - Run to Printer error

We upgraded our FSCM8.9 to FSCM9.1. We can run the crystals to file. But while running it to a network printer, I receive the following message. "Crystal Runtime exception: The printer specified can not be found. It may not be accessible in the current security context."
Do any have faced same problem with crystal reports 2008.
Thanks InAdvance

We had to define all the printers to the Server. Once defined, the crystal reports would run and print.

If image file not exist in image path crystal report not open and give me exception error problem

Hi guys my code below show pictures for all employees
code is working but i have proplem
if image not exist in path
crystal report not open and give me exception error image file not exist in path
although the employee no found in database but if image not exist in path when loop crystal report will not open
how to ignore image files not exist in path and open report this is actually what i need
my code below as following
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoRall", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
foreach (DataRow dr in dt.Rows)
FileStream fs = null;
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + dr[0] + ".jpg", FileMode.Open);
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dr["Image"] = imgbyte;
fs.Dispose();
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();
and exception error as below

First: I created a New Column ("Image") in a datatable of the dataset and change the DataType to System.Byte()
Second : Drag And drop this image Filed Where I want.
private void LoadReport()
frmCheckWeigher rpt = new frmCheckWeigher();
CryRe_DailyBatch report = new CryRe_DailyBatch();
DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter ta = new CheckWeigherReportViewer.DataSet1TableAdapters.DataTable_DailyBatch1TableAdapter();
DataSet1.DataTable_DailyBatch1DataTable table = ta.GetData(clsLogs.strStartDate_rpt, clsLogs.strBatchno_Rpt, clsLogs.cmdeviceid); // Data from Database
DataTable dt = GetImageRow(table, "Footer.Jpg");
report.SetDataSource(dt);
crv1.ReportSource = report;
crv1.Refresh();
By this Function I merge My Image data into dataTable
private DataTable GetImageRow(DataTable dt, string ImageName)
try
FileStream fs;
BinaryReader br;
if (File.Exists(AppDomain.CurrentDomain.BaseDirectory + ImageName))
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
else
// if photo does not exist show the nophoto.jpg file
fs = new FileStream(AppDomain.CurrentDomain.BaseDirectory + ImageName, FileMode.Open);
// initialise the binary reader from file streamobject
br = new BinaryReader(fs);
// define the byte array of filelength
byte[] imgbyte = new byte[fs.Length + 1];
// read the bytes from the binary reader
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
dt.Rows[0]["Image"] = imgbyte;
br.Close();
// close the binary reader
fs.Close();
// close the file stream
catch (Exception ex)
// error handling
MessageBox.Show("Missing " + ImageName + "or nophoto.jpg in application folder");
return dt;
// Return Datatable After Image Row Insertion
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Display more pictures in crystal report not work why

Hi guys i try to show picture of specified employee from network path in crystal report it work
but i don't know how to show all pictures to all employees in crystal report
Can any one help me to customize my code to accept show all employee pictures
i try to make this from crystal report and assign path but version of crystal report not allow to me
to put path
my code below show picture to one employee from text box control from network path
I need to customize this code to accept show more one pictures of employees from employee table
the following fields i show in report
EmployeeNo integer
EmployeeName nvarchar(50)
Image datatype image
btnemployeeno_click
DataTable dt = new DataTable();
string connString = "data source=192.168.1.105; initial catalog=hrdata;uid=sa; password=1234";
using (SqlConnection con = new SqlConnection(connString))
con.Open();
SqlCommand cmd = new SqlCommand("ViewEmployeeNoR", con);
cmd.CommandType = CommandType.StoredProcedure; // Viewxxx doesn't seem a good name for a sp
cmd.Parameters.Add("@EmployeeNo", SqlDbType.NVarChar, 20);
cmd.Parameters["@EmployeeNo"].Value = textBox1.Text;
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
da.Fill(dt);
string path = Path.Combine("\\\\192.168.1.105\\Personal Pictures", textBox1.Text) + ".jpg";
FileStream fs=null;
if (File.Exists(path))
fs = new FileStream("\\\\192.168.1.105\\Personal Pictures\\" + textBox1.Text + ".jpg", FileMode.Open);
else
MessageBox.Show("Please File Not Exist");
BinaryReader br = new BinaryReader(fs);
byte[] imgbyte = new byte[fs.Length + 1];
imgbyte = br.ReadBytes(Convert.ToInt32((fs.Length)));
foreach (DataRow dr in dt.Rows)
dr["Image"] = imgbyte;
ReportDocument objRpt = new Reports.CrystalReportData2();
objRpt.SetDataSource(dt);
crystalReportViewer1.ReportSource = objRpt;
crystalReportViewer1.Refresh();

Hi,
Put an image field in your report, then change the image’s Graphic Location:
right click the image, select Format Graphic, select Picture tab, click the conditional-formula button that look like a x2 and set the formula’s text to
the name of the formula or parameter field that will contain the image’s URL.
Save the formula and click the OK button. Save the report and test it.
Be carefull with the size of the image field. If this size is not equal to the image itself it could get resized.
Good Tutorial
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

After i install Visual-Studio 2013 crystal-report not working

hi
after i install Visual-Studio 2013 crystal-report not working on my Visual-Studio 2010 projects
when i try to open crystal-report i see this:

Hi E_gold,
Crystal Reports forum may be a better place for you.
Thanks for your understanding.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Does end user need Crystal Reports to run saved reports

This seems like such a simple question, but I am unable to find the answer in the documentation, so here it goes.
On UCCX does end user need Crystal Reports to run save custom reports that were created using Crystal Reports

Hi
No, UCCX comes with the 'Historical Reporting Client' which contains a Crystal runtime that renders the reports.
You only need Crystal Pro if you wish to author new reports for the system.
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Crystal reports not working in windows 7 but working fine on XP

I have a VB .net 2005 windows app. It has been working on Windows XP (32-bit) environment for a while and now we are moving to Windows 7 (64-bit). The program runs fine except for the reports which was written using the crystal report built in with VB .net
2005. I get an error Database login and it asks for user ID and password. HELP PLEASE !!!!
I am using the following connection string:
DBconn.ConnectionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & str_data & ";Persist Security
Info=true;user ID=Admin;Jet OLEDB:Database Password= mypassword"
And on the REPORT form I have the following code
Private Sub frmExportDiv_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim crReportDocument As CrySelectedDivisionSummary
crReportDocument = New CrySelectedDivisionSummary
Dim ss As String = Application.StartupPath()
Dim logOnInfo As New CrystalDecisions.Shared.TableLogOnInfo
logOnInfo.ConnectionInfo.ServerName = ss & "\\Firm_data.mdb"
logOnInfo.ConnectionInfo.Password = "mypassword"
logOnInfo.ConnectionInfo.UserID = "Admin"
crReportDocument.Database.Tables("qryExportDiv").ApplyLogOnInfo(logOnInfo)
cryprintandexport.ReportSource = crReportDocument
End Sub

Hi vbmaayah,
CR is not supported anymore by MSFT. Here is the official support forum:
http://scn.sap.com/community/crystal-reports/
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Crystal report not able to see a SQL view in Business One

Hi all
I am trying to create a report using views I have created in the Business One database.
I can run the report fine when using the Crystal Designer, but when I try to Preview the external Crystal report file from within Business One, it comes up with an error 'The table 'xxxx' can not be found'.
I have tried to make the connect an SAP Business One connection, and also tried it with the OLEDB connection. Neither worked.
(I can however preview other 'table' reports fine)
I am running SAP B1 8.8 SP 0 pl 15 and SQL2005.
As views are allowable in B1 databases I would hope that we can use them in our Crystal reports. Can we use views?
Or is it my setup/Crystal setup that is causing me issues.
Any help much appreciated.
Thanks
Denise

Hi Gordon and Kevin
Thank you both for your replies.
Gordon - great idea to use the Command mechanism. I had not thought of that but will give that a try.
Kevin - pleased to hear views are allowed as I often use them in my reports.
I think I have a more basic issue with my setup of Crystal & B1 on the system - and perhaps this is causing my inability to use views.
My current approach is to install Crystal Designer on the server. I know that it is preferable to put the designer elsewhere but I am not able to connect using SAP Business One connection at all from the client machines. Frustration! (Keeps saying Logon failed and I KNOW I have the correct logon details)
Will update this thread once I have set up the designer on the server and hopefully succeeded in including a view (or command) in a report.
Thanks for your help
Denise

Crystal Report Not Refreshing in browser

Hi all,
Am using crystal report for my web application so here am passing my parameter from jsp page
but it is not refreshing
For example
I am select Month=jan my query goes this way.
Select * from employee where month='jan' group by department order by designation
when am intially design in eclipse in filter option am selecting 'jan' and when am running in browser am passing the same query with the parameter but here instead of 'jan' am passing month variable where my month variable changes every time according to user choose
my crystal report is not getting refreshed ..
hope u understood my problem
Regards
Vanishree.B

Hi Tejomay ,
I have tried that even after calling refresh() , it ;s not getting refreshed..but if am using signal table in my query it is getting refreshed .but when am grouping with another table it is not refreshing..
Regards
Vanishree

Crystal report not working on 64 bit machine

Hello friends,
Hope everyone is doing good. I have an issue and you all are requested to help me out.
I have build an Application using VS 2008, i used Oracle 10g as database and Crystal report 2008 for reports. The Application and reports are working fine when i deploy it on 32 bit machine, but when I deploy it on a 64 bit machine, my Application works fine but reports are not displayed, when ever i run report it ask Db credential with the following message
"The report you requested requires further information."
then Server, user ID and password filed, I off course supplied credential but no results.
For resolving the issue i installed VS 2008 on 64 bit machine with redist CR Viewer and tried to verify database for the report thinking this might be an issue, but in CR designer it gives me following error when i tried to verify database or create new connection using OLEDB provider for Oracle
Crystal Reports ActiveX Designer
Logon failed.
Details: ADO Error Code: 0x
Source: Microsoft OLE DB Provider for Oracle
Description: Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation.
Provider is unable to function until these components are installed.
OK
I tried the following fixes as well:
- Installed CR viewer for 64 bit machine
- Registering ORAOLEDB10.dll
- Reinstalling VS 2008
The Application works fine but Crystal reports are malfunctioning. Please help!!!!!!!!!!!!!!!
Thanks a ton in Advance
Happing coding and resolving issues
Danish Mustafa Khan

Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Crystal report not working on a client pc

Hi Everyone,
I have developed windows application in vb 2012 which will bind data from ms access in crystal report. My windows application is running fine on local machine where i installed vs2012 but when i create a setup an installed it on the local machine it is giving
this error
'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine error
and when i install on a client machine it is giving me the following error,
System.TypeInitializationException: The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw
an exception. ---> System.IO.FileNotFoundException: Could not load file or assembly 'CrystalDecisions.ReportAppServer.CommLayer, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' or one of its dependencies. The system cannot find the
file specified.
at CrystalDecisions.CrystalReports.Engine.ReportDocument..cctor()
Anyone faced same error ?? Please suggest.

Also for 3rd party software usually contacting the vendor for assistance is recommended. Especially since Crystal Reports are not supported by Microsoft. The search engine or appropriate forum at the below link should be able to assist you.
SAP Crystal Reports, version for Visual Studio
Please BEWARE that I have NO EXPERIENCE and NO EXPERTISE and probably onset of DEMENTIA which may affect my answers! Also, I've been told by an expert, that when you post an image it clutters up the thread and mysteriously, over time, the link to the image
will somehow become "unstable" or something to that effect. :) I can only surmise that is due to Global Warming of the threads.

Crystal Report not working when posting the report to the Crystal Server.

Hi All,
I created a report using Crystal Reports 2008 with two ODBC connections (User DSN's). When I run the report in Crystal Reports (where I originally created it) it runs fine with no problems.
I am now trying to load it on Crystal Server 2008. When I try to run this report in InfoView, I get a message: "Error Failed to open the connection." I am thinking that it has to do with the ODBC connections but I am not quite sure. Could someone lead me in the right direction? How will the report that I now saved in the repository on the server connect to the ODBC stream?
Thank you in advance.

Solved my problem. I had to tweak the ODBC drivers on the server.

Crystal Report not pulling over user prompts

I am having issues with a Crystal Report that is pulled over into a third party CRM db. I've already checked the Forums and the SAP notes but have had no luck in finding any help. Our Crystal Report pulls up fine on the client, but it is missing the user prompts (parameters) when it comes through. We don't get any errors what so ever. The user is supposed to put in the date range that they would like to see. Other reports which don't have any prompts work fine. We've run the reports in Crystal on the server and they work just fine. We are just having this problem whenever the client is trying to run the report. When we've talked to our technical support for our CRM db they said we are supposed to get a lightning bolt and then when we click on it, it will prompt the user. However, the lightning bolt doesn't even show up when the report is pulled up. I'm not sure is there is something being done wrong within our report, or if this is an issue with the Active X controls. We are using Crystal Reports XI on an SQL 2005 server. Any help is greatly appreciated - I'm very new to this so if someone could please point me in the right direction it would be helpful. Thanks!

Hello,
The Lightning bolt is the report refresh button in CR 10. CR 11 has blue circular arrows, one on top of the other. Or you can simply press the F5 key to refresh. It may be you are mixing versions or something else.
I suggest you work with your tech support to figure out how your application should work and what is posibly missing. If you have the report Designer and they work there then your app or DB has issues.
We don't know your app or how it all is supposed to work so not much we can suggest other than to get your support to help you.
If it's a WEB app then possibly the you have the Pop-up blocker enabled, the Parameter UI would considered a pop-up.
You relaly need to get your CRM support guys to help you first. If thye can't figure it out then ask them to put a call into support.
Thank you
Don

Crystal Report not running

Similar Messages

Maybe you are looking for