Crystal report parameter issue in SAP B1 8.8

Hi Experts,
We are facing following issue in Crystal report SAP B1 8.8 version
Can not open crystal report without mentioning optional parameters.
User is forced to mention all parameters
User should allow to open crystal report by mentioning mandetory parameters
if We set for the parameter value of field [Optional Prompt] to 'True' and then preview in SAP Business One, then although the dialogue is displayed, click 'OK' without populating the parameter value, the report is run
but in our case we are passing parameters through Stored Procedure and this option is block in report to do so.
means that option available to make optional true / false is block and we are not able to do anything.
Pls. provide solution
Regards
Kamlesh Vagal

Julie.
This change has already occurred?
Thanks.

Similar Messages

Crystal Report - Parameter issue (advanced dialog box)

In our wpf .net application we view the crystal report, the report prompts for entering 2 parameter values i.e 2 dates and inturn these parameters will be used to generate the crystal report.
The parameter panel on the left has a button (show advanced dialog box). This button should again invoke the same parameter prompt dialog box, so that the user can modify these parameters and the report can be regenerated.
Issue is that when I click on the the button, this generates a null reference exception in the code. The call stack is -
at CrystalDecisions.Windows.Forms.ParameterFieldInfo.get_isDCP()
   at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.ShowAdvancedDialog(ParameterUnit pu)
   at CrystalDecisions.Windows.Forms.InteractiveParameterPanel.pu_ShowAdvancedDialog(Object sender, EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterUnit.OnShowAvancedDialog(EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterUnit.editControl_ShowAdvancedDialog(Object sender, EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterValueEditControl.OnShowAdvancedDialog(EventArgs e)
   at CrystalDecisions.Windows.Forms.ParameterValueEditControl.btnShowAdvancedDialog_Click(Object sender, EventArgs e)
   at System.Windows.Forms.Control.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnClick(EventArgs e)
   at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
   at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ButtonBase.WndProc(Message& m)
   at System.Windows.Forms.Button.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Please note, I used the .net reflector to debug the crystal report dll , the isDCP method looks like -
public bool isDCP
      get
        return (this.Attributes.Contains("IsDCP") && ((bool) this.Attributes["IsDCP"]));
Looks like the attributes value is null.
Please let me know your comments. Am I missing something while getting the report in the frontend.
I use crystal reports 2008 sp 2 (also note that my gac contains different version of crystal reports (cannot remove them - tried it) , with windows server 2003. I use web service with proxy to get the report from the local server.
Note I also tried to create sample application in which I specify the local path to reports source , this works. However when I tried to use webservice, i was getting soap exception.
Please let me know how solve above issue

So you found the Report Design forum, if you looked down one more you would have found the SDK forum, SDK stands for Software Development Kit if you did not know.
Or did you not mention you get the same error when you run this report in CR Designer, if so then you were in the right forum.
Try Service Pack 3 also
Move to the SDK forums.

Crystal Reports Charting Issue with SAP Function Module

I created a custom SAP Function module that returns 2 tables. The first table (summary table) contains two columns, column "a" contains a grouping and column "b" is a quantity. The second table is the detail and is linked to the first table by the grouping, column "a" , in both tables. I can bring the function module into Crystal Reports, but cannot create a drill down using a pie chart off the summary table. When I go into the Chart Expert - Data Tab only the Advance button is active and the Group, Cross-Tab, and OLAP buttons are deactivated. First of all, is it possible to do this using a SAP Function Module, if yes, what am I doing wrong.

hello Jhess,
i am not sure if you found an answer for your question yet. if you have a Group and a Summary on your report (i.e. the Sum of your Quantity field) then group charts should be enabled.
cheers,
jamie

Token of Crystal report not showing in SAP B1

While using double where condition in SAP Crystal Report below is given format
Parameter@SELECT Code, Name FROM ABC WHERE Code1 = '@Code1' AND Code2 = '@Code2'
it showing perfect in SAP crystal report while checking from SAP B1 it coming blank list.
Please tell me what to do.

Hi Pankaj,
Please repost to the SAP Business One space
-Abhilash

Chart are not supported in crystal report - on top of SAP R/3

Hi All,
I have made one crystal report on top of SAP R/3 system. I have included some graphs on it.
But when i uploaded that report on infoview portal, it shows blank page when i try to view it on portal. It works fine in Crystal Report 2008.
I have one other report without graphs, it works fine on infoview portal. This reports works fine with "Enterprise" authentication.
Products:
- Crystal Report 2008
- Business object Enterprise 3.0
- Authentication: Enterprise
Please help as soon as possible.
Regards,
Rishit

Hi..
Ya.. its strange!! Because when i have created a report without Chart.. it works fine on portal. But when i added a chart in same i get blank page.
And have you make that report on top of SAP R/3 (Or ECC).
Even when i have made report on top of SAP BI with chart.. it works fine on portal.
The issue is just with SAP R/3 (Or ECC).
Regards,
Rishit

Total No of pages different in report printed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8)

Currently in our application, we are using Crystal Report XI R2 for generating the reports. We are in the process of upgrading the Crystal Report to SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). I updated that on my machine and all the reports work fine. I didn't have to modify any of the reports.
However when comparing the reports, we found that there are few reports on which the total no. of pages differ from the report displayed using Crystal Report XI R2 vs SAP Crystal Reports, developer version for Microsoft Visual Studio (File Version 13.8). Comparing the reports, it looks all the data that were fit on one page earlier with version XI R2 doesn't fit on the same page with version 13.8, thereby increasing the page counts.
The fonts, page margins everything set on report itself. Nothing being set in the code.
Both the application is using the same report that is pulling the data from the same database. Our application is a web application.
Any suggestion, why this is happening.
Thanks.
Sanjay

I am not sure what is being compared here?
CRXI R2 designer to CRVS?
CR XI R2 in some version of .NET to CRVS?
CR XI R2 using RDC SDK to CRVS?
Also, is this happening on your development computer or after you deploy?
If you compare the the "Page setup" options dialog between reports that work and those that do not work, do you see any difference?
Is this a web or a win app?
Are you seeing the same issue when viewing and exporting - say export to PDF?
What is the printer driver used and it's version?
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Crystal report using ABAP from SAP ECC6.0 EHP 3.0

Hi Gurus,
Can i create crystal report using ABAP in SAP ECC 6.0 EHP 3 . as i am not able to see this link in SPRO.
IMG > SAP NetWeaver > Application Server > SAP List Viewer > Maintain SAP GUI Specific Settings.
Kindly guide me urgently.

http://help.sap.com/saphelp_slc/helpdata/en/27/c9ee1951fc4fb9ac322ac7e6fa7372/content.htm
If I understood your question correctly.
Have a look in the link above.
It is possible to use Crystal Reports from ALV.
Tammy Powlas also has some good guides on how to do this.
The ABAP however is not covered that much.
Best Regards
Ingrid

Crystal Reports when connecting to SAP ERP gives Logon Failed error

Hello Friends,
We are trying to implement the SAP Best Practices Crystal Reports and Xcleisus Dashboards for ERP. We are using BI 4.0 SP2, Crystal Reports 2011 SP2 and SAP ECC 6.0 FP 5.
We have done all configurations at the SAP end and successfully adpated a couple of Crystal Reports and they work fine.
My client machine crashed and I had to reinstall my Windows and all Client Tools. After the installation, when I tried to adapt a few more reports, I face the below problem:
After opeing the Crystal Report, when trying to Set the DataSource location, I select Create New Connection and select SAP Infosets. The SAP logon popup comes and I select the ECC system and enter the logon credentials for SAP ECC, I get an error message saying
Logon Failed.
Details: some square boxes.
The error doesnt really make any sense. Unfortunately, I am not able to test this scenario in any other machine as I am the only developer here. I am almost sure this is because of some configuration set up in my client machine,
Can some please help?
Thanks in advance!

Hello,
I recommend looking at a couple of things:
1) Do you have the latest Crystal transports installed with ECC? SP 2 has new transports. Check this subdirectory
Crystal Reports 2011\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports\unicode_compatible\cofiles
Use STMS to see if transports are installed
2) Are you using 3.1 ? Do you have the Integration Kit installed on ECC and client side?
Tammy

Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

Dear All,
I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
Crystal Reports 2008 Reference [original link is broken]
I have also searched it but unable to find it. If anyone has this, kindly share it.

Hi Iqbal,
There is a service pack in the following link
https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
There is a fix pack 03 included in the folder, I don't know if this is relevant.
Cheers

Crystal Reports transport files for SAP APO / SCM

Hi there,
Problem: we want to use Crystal Reports on top of SAP APO / SCM and have some difficulties getting the definitions of BW / OLAP servers right and don't know which transports to import on the SAP to report with Crystal.
System is a SAP SCM system with APO module. There is a cube in this module (because there is some internal BW system) and I can see the cube in Crystal Reports. When I want to report from this cube I get an error:
"/CRYSTAL/MDX_GET_STREAM_INFO" not found.
This means some transport files were not imported and some functions are missing.
The following transports are missing:
====quote from transports_EN.txt included in transports for Crystal Reports=====
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
===========================================================
My SAP BASIS expert refuses to import these transports in SAP SCM, because he thinks it is not an SAP BW system as listed in the above transports_EN.txt file. Just trying is not an option because transports cannot be removed once imported...
In my opinion these transports have to be imported to clearly access the cube and will work on SAP SCM even if it's not a 'dedicated' SAP BW environment. In other words, these transports should be imported and will work on SAP OLAP servers like SAP BW, SAP SCM, SAP SRM (APO) or SAP SEM.
Does anyone of you have some more experience on reporting from SAP SCM / APO cubes and if I can import these transports without getting some nasty errors, because its not an SAP BW system?
Kind regards!
Edited by: J. van de Mheen on Mar 3, 2009 4:21 PM

Thanks for your reply, but this is not helping me much.
Let me explain more.
In the transport_EN.txt file we see this:
If your SAP system is running on a 6.20 *BASIS system* or later, you must use the files listed below:
(These files are Unicode enabled.)
* Open SQL Connectivity transport (K900574.r21 and R900574.r21)
* Info Set Connectivity transport (K900575.r21 and R900575.r21)
* Row-level Security Definition transport (K900576.r21 and R900576.r21)
* Cluster Definition transport (K900585.r21 and R900585.r21)
* Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an *SAP BW system*:
(These files are Unicode enabled.)
* Content Administration transport (K900579.r21 and R900579.r21)
* Personalization transport (K900580.r21 and R900580.r21)
* MDX Query Connectivity transport (K900581.r21 and R900581.r21)
* ODS Connectivity transport (K900582.r21 and R900582.r21)
So I have to import 5 transports in SAP BASIS system and 4 transports in SAP BW system to make full use of the integration kit.
SAP SCM / APO is basically a BASIS system, so the BASIS expert says only those 5 transport have to be installed.
But SAP SCM / APO is also having some reporting capabilities and stores data in OLAP cubes (Infocubes).
In Crystal I can see these cubes when using SAP BW MDX connection.
To make the error go away, I must have some function modules used in transport 'MDX Query Connectivity transport. But the BASIS expert doesn't want to import this transport, because it is listed as a transport for a SAP BW system and he says SAP SCM / APO is NOT a SAP BW system (it's a BASIS system).
And now I have to get some proof that this transport has to be imported in the SAP SCM / APO BASIS system before he installs it...

How to add Crystal Report Basic 2008 in SAP B1 2005 B

Hi All Experts,
I have installed Crystal Report Basic 2008 in SAP B1 2005 B PL 25.
But I dont know how to add this in addon.
Can any body guide me to do plz.
With Warm Regards,
Chintesh Soni

Chintesh Soni
Go to administration >add-on mabager and make sure crystal report is started
now select administration -> Crystal Report Administration->Account Setup ->enter password for ur database and click-> update->create Ext Tables
now select Manage Crystal Report->new report ->Browse to add .rpt file, give a name description select module and you can set the access as public or any specific group. select public for first time and click update
Now click on Preview and Print to view the report
Thanks
Krish

How to connect Crystal Report 2008 server with SAP BI/BW server

Hi ,
I have downloaded the 60 Days trial version of "Crystal Report 2008 Server' from sap site to my machine. Now i would like to connect this Crystal server with SAP BI and want to use the data of BI Bex queries and Infoproviders.
Can you please guide me how to connect them?
Aslo how can i get the free trial version of Intergration kit ..here please provide me the entire full path of site(to download the Integration Kit).....
Any inputs would be appreciated!!
Regards,
Naween

Hi Michelle,
Older versions of CR would allow you to run CR from a network share point but you still had to have a license for each user. Current versions of CR do not allow you to do this any more, possibly using a Citrix or Terminal Server would allow this but you still need a license for each user. Older versions had a Network install option.
And as suggested exporting to PDF or some other format is fine for end users viewing your output. They are not using CR but Adobe Reader or Word etc. to view the reports, they just can't use the Designer to view the reports.
Hope this is clear now?
Thank you
Don

Crystal Report 2008 included with SAP integration Kit

Hi
We want to know the crystal report 2008 come with SAP integration Kit

Take a look into the following document:
http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948
It might help.

Transporting a Crystal Report to a different SAP landscape

I have developed a Crystal Report in our development SAP landscape. I have published it and am able to view it in Infoview. I would now like to transport that report to our test SAP landscape. How do I transport my Crystal Report? I have looked in the SAP Integration Kit Users Guide, Installation Guide and the Admininistration Guide with no luck. I have also searched the Knowledge Base. Any help would be greatly appreciated. Thanks.

Hi Dennis,
in case you saved the report to the BW system via the SAP menus in the CR Designer then you can use the standard transport mechnism from the SAP system
Ingo

SAP tab in Crystal Reports 2013 issue

We are using SAP Crystal Reports 2013 SP3 to build reports on BEX queries (BW 7.2). Creating a report via 'File' --> New connection --> BW MDX driver works fine, I can select bex queries & cubes and see the data. However SAP provided tab 'SAP' does not work as expected. When adding a new bex query using SAP--> Create new report from a query, I can see the list of queries and select one but it does not open and throws the following error -
"An error occurred while generating a new report templete.
No error"
Using the "File" option any change to the .rpt file forces BO admin to update "DB logon" information in CMC (currently i cannot save .rpt file directly on enterprise from Crystal client due to some issue) and we want to avoid this kind of maintainence using SAP authentication provided by using SAP tab, also the Crysal report prompts when run from BI launch pad request for prompt values twice (once for the report and once to pull list of values for each prompt) which can be avoided using SAP tab. I thought access to dev BW server is fine since the "File" tab works fine. Our BASIS team confirmed BOBJ dev servers have access to BW gateway. Am I missing something here, please help me with your experience and ideas to troubleshoot this as the only solution i could google was from a 2012 SAP recommended article to fix reginfo configuration files on SAP server
I reinstalled Crystal Reports client twice to make sure intallation was not the issue.
Thanks
GORO.

Hi Abhilash,
Thanks for your response.
Yes reports are working in CR 2013 designer.
Getting Alignment and long spaces between the paragraphs issues even though report has properly designed on designer.
After exporting to pdf getting above errors...
-Srinivas

Crystal report parameter issue in SAP B1 8.8

Similar Messages

Maybe you are looking for