[CS5.1] Javascript functionality removed from Applescript?

I haven't been able to find any answers with this.. and starting to feel like i'm the only one with the problem. I just finally upgraded from CS2 - thankfully not a whole lot has changed and i've found solutions for converting most of my code, but this one i'm stuck on.
The do javascript command is clearly listed in the library as valid, so when i compile it's recognized and all, it's just that whenever executed Photoshop gives an error saying, General Photoshop Error occured. This functionality may not be available in this version of Photoshop.
Help..? They didn't really get rid of it, did they?

Yes that is the thread that I meant… If you've tried what is suggested there then I don't know any more… I had switched scripting language before this change… How much JavaScript is there, can you put it in an inline string? Does this simple example work for you…
tell application "Adobe Photoshop CS2"
     tell document 1
        set docName to name
        set docMode to mode as string
          do javascript "alert( arguments[0]+' is '+arguments[1] )" with arguments {docName, docMode}
     end tell
end tell

Similar Messages

[JS,AS,CS3]running javascript in bridge from applescript

Sorry for the cryptic subject description, and you might think this is a bit off topic, but i hope you could shed some light on this.
I need to execute a Javascript in Bridge from an applsecript using an Applescript. Bridge only has one AS command: do javascript with arguments.
My testtude looks like this:
set myJS to "
alert(arguments[0].toString());
alert(arguments[1].toString());
alert(arguments[2].toString());
alert(arguments[3].toString());
alert(arguments[4][0].toString());
set arg1 to 12
set arg2 to "some text"
set arg3 to "'some single quoted text'"
set arg4 to "\"some double quoted text\""
set arg5 to {1, 2, 3, "a", "b", "c"}
tell application "Bridge CS3"
do javascript myJS with arguments {arg1, arg2, arg3, arg4, arg5}
end tell
--tell application "Adobe Photoshop CS3"
-- do javascript myJS with arguments {arg1,arg2,arg3,arg4,arg5}
--end tell
You would expect a series of dialogs to appear with the content of the arguments, but you'll get nothing! If you omit the '[0]', you'll get any numerical value, but all strings, however they are quoted, are ignored.
Strange.
Stranger still is, that if do the exact same thing in Photoshop, it works like a charm and you can pass any kind of data as argument.
Any ideas on what's going on?
Thanks!

Here is my AS script from Xcode project:
Some text is in Russian don't mind it. Most important that this is a
working example.
global myBridgeLabel
on clicked theObject
if name of theObject is "b1" then
set processName to (StringToUnicode "Начало работы")
set myBridgeLabel to "Red"
set myLabel to 1
else if name of theObject is "b2" then
set processName to (StringToUnicode "Сдано на цв-корр")
set myBridgeLabel to "Green"
set myLabel to 2
else if name of theObject is "b3" then
set processName to (StringToUnicode "Сдано на ДТП")
set myBridgeLabel to "Yellow"
set myLabel to 3
else if name of theObject is "b4" then
set processName to (StringToUnicode "Забрано")
set myBridgeLabel to "Blue"
set myLabel to 4
else if name of theObject is "b5" then
set processName to (StringToUnicode "Пересдано")
set myBridgeLabel to "Purple"
set myLabel to 5
end if
tell application "Adobe InDesign CS2"
set mydocument to active document
set myDocumentPath to full name of mydocument
set workerName to "Сервецкий"
tell metadata preferences of mydocument
   set theDate to current date
   set myWeekday to weekday of theDate as string
   set myDenNedeli to my convertWeekday(myWeekday)
   set myRecord to (processName & " " & workerName & " ") & myDenNedeli & " " & text 1 thru -4 of time string of theDate & "
   set myHistory to get property namespace "http://ns.adobe.com/photoshop/1.0/" path "History"
   set property namespace "http://ns.adobe.com/photoshop/1.0/" path "History" value myHistory & myRecord
end tell
set myJavaScript to "var myLabel =\"" & myBridgeLabel & "\"; app.activate(); var bt = new BridgeTalk; bt.target = \"bridge\"; myScript = 'app.displayDialogs = \"none\"; var t = new Thumbnail (File (\"" & myDocumentPath & "\")); var mdata = t.metadata; mdata.namespace = \"http://ns.adobe.com/xap/1.0/\"; mdata.Label = \"' + myLabel + '\";'; bt.body = myScript; bt.send();"
do script myJavaScript language javascript
tell mydocument to save
end tell
tell application "Finder"
set myFile to a reference to file myDocumentPath
set label index of myFile to myLabel
end tell
end clicked
on convertWeekday(myWeekday)
if myWeekday = "Monday" then
return "Пн"
else if myWeekday = "Tuesday," then
return "Вторник"
else if myWeekday = "Wednesday" then
return "Среда"
else if myWeekday = "Thursday" then
return "Четверг"
else if myWeekday = "Friday" then
return "Пятница"
else if myWeekday = "Saturday" then
return "Суббота"
else if myWeekday = "Sunday" then
return "Воскресенье"
else
return "N/a"
end if
end convertWeekday

Javascript function call from PL/SQL block

Hello,
I am writing this pl/sql block that has checkbox and onselect, it calls javascript function.
I defined javascript function in page header, even though I get error that says function is not defined.
Please help.
Thank you,
H.

I got it resolved...!!!

Why was the "I'm Feeling Lucky" functionality removed from the Firefox awesomebar in all releases after version 3.6?

In Firefox 3.6, when I type something specific, like "wikipedia steve jobs" into the url bar, I am taken directly to Wikipedia's page for Steve Jobs, and if I type something less specific, I am taken to a Google search results page for what I typed in the bar (unless it was a URL, obviously); in the current version of Firefox, though, I am taken to a Google search results page for whatever I type in (again, not a URL, obviously), even if the page I am seeking is obvious-- how can I avoid this extra step and regain the Firefox 3.6 "I'm Feeling Lucky" functionality?

There is a change beginning in Firefox 4 and later versions in how Location bar search works.
* In Firefox 3.6.x, Location bar search uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site otherwise it shows the Google search result page
* In Firefox 4 and newer versions the default is to perform a Google search and present the Google search results page if you type something which is not recognized as a URL you must type a complete URL, such as www.youtube.com to go directly to the site.
To get the Firefox 3.6.x behavior in Firefox 4 and newer versions, you can either change a hidden preference OR install the add-on below.
-> To change the preference, type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* In the '''Filter bar''', type '''keyword.URL'''
* Right click the preference '''keyword.URL''' and click '''Modify'''
* A small window will appear. Copy one of the URLs below and Paste into the box in that small window (or type it into the box in that window exactly as shown below):
* Google "I'm Feeling Lucky" -> http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name" -> http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* Close the '''about:config''' tab and then Restart Firefox.
-> OR install this extension:
* Browse By Name 1.1
* https://addons.mozilla.org/firefox/addon/browse-by-name
Check and tell if its working.
References:
* http://kb.mozillazine.org/About:config
* http://kb.mozillazine.org/Keyword.URL
* http://kb.mozillazine.org/Location_Bar_search
Taken from:
* https://support.mozilla.com/en-US/questions/876502

Edit function removed from SE16N transaction, reports and interface FM

I give it 3 years before work programs are updated...

I think the whole story is too long to fit into a 2500 character post..
The function should have the strictest check which the system has to offer. Which is 01 DEBUG. But in this case checking the object name is not possible, so 02 DEBUG is needed for that in the SE16N include where the function is activated. However, someone debugging another program could submit the SE16N FM from there as well, so you must at least be able to display in the debugger to get anywhere near it in the first place.
So it checks all three.
It also means that if the person does not have the authority and wants to use a dark trick to assign authorizations, they will need to go looking for SAP_ALL or possibly a multiple of authorizations to assign to pass all three checks. That is more "noisy", which is also good for finding people with fat fingers.
> why was it not limiited to CO-tables?
It does check S_TABU_DIS...?
AFAIK the popularity of the transaction (much more than just this edit feature) caught SAP by surprise and by the time it's use had exceeded imaginable boundaries... there was little chance of retro-fitting functional restrictions or a component downport to "SAP_BASIS". So authority-checks it was...
Note that the code field of SE16 is still there, as it has been since ancient times.
Cheers,
Julius

In a javascript function invoked from an onsubmit handler, if the function returns false, the form is still submitted. If I find an error in a form, how do I cancel the submit?

HTML form has: action="/TTFFRP/addlicense.rex" method="get" onsubmit="validate_data();"
validate_data is defined in tags:
function validate_data()
alert('in validate routine');
if (document.getElementById('custname').value == '')
alert('Customer name must not be blank; put in name of organization licensing File RePackager');
return false;
}

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox.
[http://forums.mozillazine.org/viewforum.php?f=25]
You'll need to register and login to be able to post in that forum.

Standard Cost Estimation Functionality removal from S.O.

Hi Friends,
I would like to know, is in SAP system there is an option to remove funcionality of auto Stadard cost Estimation i.e. we don't like to make Standard cost Estimation at the time of Sales order creation.
Can you Please tell me about this feature.
Rgds, Krishan Raheja.

Hi,
I am talking about the Cost Estimation happens, as it shows the cost via menu path---> Extra --> Costing. Further, the system will make the accounting entries for consumptions/Receipt w.r.t. to cost calculated vai this estimation. VPRS condition is not having the same prices as calculated in Costing. Further, the stock will also remain with same prices as calculated in price.
Can you please suggest, if there is any option, so that we can omit this costing calculation and system make consumption/receipt entries with the values in material master.
Rgds / Krishan Raheja.

Error message "Product Recovery Function" removed

Greetings
Hi all........I am in a big trouble at this moment.I have installed OS XP which i am having from university. I am trying to reinstall my original Winxp using Rescue & Recovery 3.0. I repaired my MBR using MBR repair diskette and installed RnR 3.0. After that when i pressed F11 key it enters in rescue and recovery but when i click to bring my laptop to original factory state it gives me an error "Product Recovery Function removed from the system". I am service partition is still intact with the hard disk. It would be really helpful if someone can share his knowledge and experience.
thanking in advance
yogesh

Hi,
The recovery DVDs from Lenovo should get you going.
Are you trying to shrink the C: partition from within Windows? It's probably the page or hibernation file that is the problem. If you want to keep trying while waiting for the DVDs you could try an off-line partitioning tool. gParted on a Linux live CD or USB flash drive for instance.
There is some cloning software that can do a shrink during the clone op - Acronis for instance.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

What does {tag_image_value} from webapps return when field is empty? How to use javascript to remove div when condition is met.

Dear all,
As stated in the question, what does {tag_image_value} from webapps return when no image has been uploaded by users. I understand that there is an OnError function that can be called if there isn't any image. However it does not do so.
I am creating a program which will check to see if {tag_image_value} contains an image. If it does not, the error will call an external javascript to remove the div such that it removes any subsequent codes in the later parts of the codes. Below is part of the program:
I have tried to compare the value to NULL, 0, -1 and "" using if-else functions but they do not work. The slideshow wrapper is part of the code from the following theme: 2027 E Colfax Ave Denver
The theme will cycle through the pictures, my purpose is to remove the pictures if the images are not present.
   
<script language="JavaScript">
function noimg1() {
     $( "#shownpicture1" ).remove();
     return;
function noimg2() {
     $( "#shownpicture2" ).remove();
     return;
function noimg3() {
     $( "#shownpicture3" ).remove();
     return;
function noimg4() {
     $( "#shownpicture4" ).remove();
     return;
</script>
        
<div class="slideshow-wrapper slider">
<div class="preloader"></div>
<ul data-orbit="data-orbit" data-options="bullets:false;animation:fade;">
    <div style="display: block;" id="shownpicture1">
    <li class="active" style="z-index: 4; margin-left: 0%; opacity: 1;"><img alt="{tag_name_nolink}" onerror="noimg1()" src="{tag_image 1_value}" /></li>
    </div>
    <div style="display: block;" id="shownpicture2">
    <li style="z-index: 2; margin-left: 100%; opacity: 1;" class="active"><img alt="{tag_name_nolink}" onerror="noimg2()" src="{tag_image 2_value}" /></li>
    </div>
    <div style="display: block;" id="shownpicture3">
    <li style="z-index: 2; margin-left: 0%; opacity: 1;" class="active"><img alt="{tag_name_nolink}" onerror="noimg3()" src="{tag_image 3_value}" /></li>
    </div>
    <div style="display: block;" id="shownpicture4">
    <li style="z-index: 2; margin-left: 0%; opacity: 1;" class="active"><img alt="{tag_name_nolink}" onerror="noimg4()" src="{tag_image 4_value}" /></li>
    </div>
</ul>
</div>


When I put in the code it doesnt work. I went into the page to check and it seems that the preloader changes some elements of the code :
<div class="slideshow-wrapper slider">
    <div class="preloader"></div>
    <div class="orbit-container">
        <ul class="orbit-slides-container" data-orbit="data-orbit" data-options="bullets:false;animation:fade;" style="height: 26px;">
            <li class="active" style="z-index: 2; margin-left: 100%; opacity: 1;">
                <img alt="{tag_name_nolink}" onerror="noimg1()" src="">
                </img>
            </li>
            <li class="active" style="z-index: 2; margin-left: 100%; opacity: 1;">
                <img alt="{tag_name_nolink}" onerror="noimg2()" src=""></img>
            </li>
            <li class="active" style="z-index: 4; margin-left: 0%; opacity: 1;">
                <img alt="{tag_name_nolink}" onerror="noimg3()" src=""></img>
            </li>
            <li class="active" style="z-index: 2; margin-left: 100%; opacity: 1;"></li>
        </ul>
        <a class="orbit-prev">
            <span></span>
        </a>
        <a class="orbit-next">
            <span></span>
        </a>
        <div class="orbit-timer paused">
            <span></span>
            <div class="orbit-progress" style="width: 0%;"></div>
        </div>
        <div class="orbit-slide-number">
            <span></span>
             of
            <span></span>
        </div>
    </div>
</div>
I tried putting this into the top of my template layout before the code starts:
<script>
$('.slideshow-wrapper slider .orbit-container ul li img').each(function(){
if( $(this).attr('src') == "" ){
$(this).parent.remove();
$('.slideshow-wrapper slider ul li img').each(function(){
if( $(this).attr('src') === '' ){
$(this).parent.remove();
$('.slideshow-wrapper slider ul li img').each(function(){
if( $(this).attr('src') == '' ){
$(this).parent.remove();
</script>
All 3 variants cannot work. Is there something wrong with the way I do the scripting?

Calling Ph from applescript Ph CS5

Hi, I have applescript that calls ph CS4 javascript and resaves jpeg as a tif. But when I run it in CS5 it gives me an error that the function 'do javascript ScriptPath' doesn't exist. What can I do. I did verified that the path to the script is correct.
set ScriptPath to (path to applications folder as text) & "Adobe Photoshop CS5:Presets:Scripts:_NDF_Ph_saveAsTif.jsx" as alias
tell application "Adobe Photoshop CS5"
    activate
    set Doc_Ref to the current document
    tell Doc_Ref
       do javascript ScriptPath
    end tell
end tell
Thank you very much for your help.
Yulia

Your syntax is fine it's the install of CS5 that is NOT working… Do a search of this forum… CS5 appears to caused many an AppleScripter problems there is a long post and somewhere in that a solution was offered…

JavaScript function which fetches return_value from List of Values

Hi,
I have created List of Values named "NICKS". I want to write JavaScript function "get_workers_fullname(nick)" which returns display_value from List of Values. The parameter of function is return_value of List "NICKS".
I am new with this and don't know how to handle this case.
Please help me.

Hi,
The LOV, I mean is the item in Application's Shared Components. I don't mean the visible SelectList on the page.
This is what I found in ApEx's help: "A List of Values can be referenced by page items as well as report fields. It controls the values displayed and limits the user's selection. Lists of Values can be static (based on values you enter) or dynamic (based on a SQL query)."
I'd like to access values in such LOV from JavaScript. I am not sure it is possible.
Cheers,
Tom.

Passing value from javascript function to servlet

Hello everybody,
i need to pass parameter from javascript function to servlet.
what i wrote is :
function callPopulateServlet(t)
var h =document.NewRequest.services;
var y = t.selectedIndex;
alert(h.options[y].value);
var id=h.options[y].value;
<%session.setAttribute("id",id);%> // am getting error at this point
document.NewRequest.submit();
with this id am quering values from database through servlet.
any body knows plz help me.
thanks,
anil.

this is the error am getting
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:85)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:299)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:315)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

How can I call a servlet method from a javascript function

I want to call l a servlet method from a javascript function.
Does any one have an example of code.
Thinks in advance

Actually, as long as the servlet returns valid javascript, you can indeed "call it" from the client. It will initiate a request and return the result to the browser.
This example uses Perl, but it could be easily modified to go to a servlet instead.
Note that it is only supported in DOM browsers (IE6+/NN6+/etc)
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" "http://www.w3.org/TR/REC-html40/loose.dtd">
<html>
<head>
<title> Test server-side JS </title>
</head>
<body>
<script type="text/javascript">
function checkIt(variable, value)
var newScript = "cgi-bin/validateJS.cgi?"+variable+"="+value;
var body = document.getElementsByTagName('body').item(0)
var scriptTag = document.getElementById('loadScript');
if(scriptTag) body.removeChild(scriptTag);
script = document.createElement('script');
script.src = newScript;
     script.type = 'text/javascript';
     script.id = 'loadScript';
     body.appendChild(script)
</script>
<p>Test.</p>
<form id="f1" action="">
<input type="text" name="t1" id="t1" onChange="checkIt(this.name, this.value)">
</body>
</html>
validateJS.cgi
#!/opt/x11r6/bin/perl
use CGI qw(:all);
my @valArray = split(/=/,$ENV{QUERY_STRING});
print "Content-type: text/javascript\n\n";
# myPass is the password
$myPass = "foobar";
if ("$valArray[1]" eq "$myPass")
print "alert(\"Success!!\")";
else
print "alert(\"Failure!!\")";

How to call a Javascript function from backing bean without any event

Hi,
Someone knows how to call a Javascript function from backing bean without any event ?
thanks

Please review the following thread:
ADF Faces call javascript
Luis.

Help needed in calling a javascript function from a jsp

Hey guys,
I need help.
In my jsp I have a field called date. When i get date field from the database, it is a concatination of date and time field, so I wrote a small javascript function to strip just the date part from this date and time value.
The javascript function is
function formatDate(fieldName)
          var timer=fieldName;
          timer = timer.substring(5,7)+"/"+timer.substring(8,10)+"/"+timer.substring(0,4);
          return timer;
Now I want to call this javascript function from the input tag in jsp where I am displaying the value of date. Check below
This is one way I tried to do:
<input size="13" name="startDate" maxLength="255" value=<script>formatDate("<%=startDate%>")</script> onChange="checkDate(this)">
I even tried this:
<input size="13" name="startDate" maxLength="255" value="'formatDate(<%=startDate%>)'" onChange="checkDate(this)">
But it dosen't work
Please help. I am struggling on this for days.
Thanks,
Ruby

Hey all you developers out there , Pleaseeee help me with this one.

[CS5.1] Javascript functionality removed from Applescript?

Similar Messages

Maybe you are looking for