CS5 / Windows 7: Plugin conflict - Class xyz installed twice

Hi
If I start Indesign I get the following assertions:
Both assertions are from my plugin. As you see on the second assertion, Indesign means that the same plugin is installed 2 times. But it isn't.
- I didn't use an installer to install it. I copied my plugin and its resource into the plugin folder. First, it works.
- Then I worked on my plugin and now, after a new installation like described above, I get the assertion.
- As you see, I changed the ID of the plugin from 0x128200 to 0x128203 for testing.
- A plugin with the ID 0x128200 is not installed. I removed it from my plugin folder, but the same assertion.
I suppose, maybe Indesign saved any data of the plugin with the ID 0x128200 somewhere and mean that this plugin is still installed. But I don't know what data and where. I am sure, that only one plugin with the ID 0x128203 is installed.
- What can I do?
- Have I to remove anything?
- I tried to delete the Indesign preference file (sart Indesign with Ctrl-Shift-...) but this doesn't worked.
- Any ideas?
Thanks for the help.
Kind regards
Hans

Firstly, search in the plug-ins folder by your plug-in name, make sure there is no any other one in another folder.
Secondly, if the plug-in id you are using is not given by Adobe, i suggest you using the default one in dollyx.
Then, if it still exists, review your code.
Hope it helps.

Similar Messages

Adobe Photoshop CS5 Windows Finnish update files failed to install/load

Adobe Photoshop CS5 Windows Finnish update files failed to install/load.
Loading updates fails at the end of the loading. Tried it yesterday and today same errors. Are the files corrupted at server or how to fix this ?
Adobe Bridge CS5 4.0.5-update
Adobe Extension Manager CS5 5.0-update
Photoshop Camera Raw 6.7-update
Photoshop CS5:n Photoshop 12.0.4-update

update by downloading the files directly and then applying them:
pre cc updates: http://www.adobe.com/downloads/updates/

I have a brand new iMac, Yosemite 10.10.1, Java Version 8, Update 25, however, I still get a window when I open Adobe Photoshop CS5, that indicates that I need to install Java SE 6 Runtime. Any suggestions?

I have a brand new iMac, Retina 5K, Yosemite 10.10.1, with Java Version 8, Update 25, however, I still get a window when I open Adobe Photoshop CS5, that indicates that I need to install Java SE 6 Runtime. Any suggestions?

Java should be downloaded directly from Apple:
Java for OS X 2014-001

My CS5 Web Premium Software disk will not install on my windows 7 pc

My CS5 Web Premium Software disk will not install on my windows 7 pc

You can try downloading the CS5 software instead of using the disk and then use the serial number from the disk to activate it.
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

Plugin conflicts

Hello there,
Here is my code .The plugin conflicts.Please help me.I don't get the camera slider.I have not yet uploaded my site.So i couldn't give the link.Please check and help me.
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<title>Trichy Engineering College - Home</title>
<link href="boilerplate.css" rel="stylesheet" type="text/css">
<link href="CSS/Layout.css" rel="stylesheet" type="text/css">
<style type="text/css">
/*.effect8
      position:relative;
    -webkit-box-shadow:0 1px 4px rgba(0, 0, 0, 0.3), 0 0 40px rgba(0, 0, 0, 0.1) inset;
       -moz-box-shadow:0 1px 4px rgba(0, 0, 0, 0.3), 0 0 40px rgba(0, 0, 0, 0.1) inset;
            box-shadow:0 1px 4px rgba(0, 0, 0, 0.3), 0 0 40px rgba(0, 0, 0, 0.1) inset;
.effect8:before, .effect8:after
    content:"";
    /*position:absolute; */
    z-index:-1;
    -webkit-box-shadow:0 0 20px rgba(0,0,0,0.8);
    -moz-box-shadow:0 0 20px rgba(0,0,0,0.8);
    box-shadow:0 0 20px rgba(0,0,0,0.8);
    top:10px;
    bottom:10px;
    left:0;
    right:0;
    -moz-border-radius:100px / 10px;
    border-radius:100px / 10px;
.effect8:after
    right:10px;
    left:auto;
    -webkit-transform:skew(8deg) rotate(3deg);
       -moz-transform:skew(8deg) rotate(3deg);
        -ms-transform:skew(8deg) rotate(3deg);
         -o-transform:skew(8deg) rotate(3deg);
            transform:skew(8deg) rotate(3deg);
</style>


<script src="respond.min.js"></script>
<link href="CSS/Body_format.css" rel="stylesheet" type="text/css">

<link href="CSS/CSS3dropmenu.css" rel="stylesheet" type="text/css">

<link rel='stylesheet' id='camera-css' href='camera/css/camera.css' type='text/css' media='all'>
<style>
p
     padding-left:10px;
     padding-right:10px;
     /*color:#FFF;*/
        a {
            color: #09f;
        a:hover {
            text-decoration: none;
        #back_to_camera {
            clear: both;
            display: block;
            height: 80px;
            line-height: 40px;
            padding: 20px;
        .fluid_container {
            /*margin: 0 auto;*/
            /*max-width: 1000px;*/
            width: 1000px;
    body,td,th {
    color: #999;
</style>
<link href="CSS/style3.css" rel="stylesheet" type="text/css">
<script type='text/javascript' src='camera/scripts/jquery.min.js'></script>
<script type='text/javascript' src='camera/scripts/jquery.mobile.customized.min.js'></script>
<script type='text/javascript' src='camera/scripts/jquery.easing.1.3.js'></script>
<script type='text/javascript' src='camera/scripts/camera.min.js'></script>
<script>
        jQuery(function(){
            jQuery('#camera_wrap_1').camera({
                height: '400px',
                thumbnails: false,
                pagination:false
    </script>

          <link type="text/css" rel="stylesheet" href="CSS/responsive-tabs.css"/>
          <link type="text/css" rel="stylesheet" href="CSS/style_tabs.css" />
          <script src="Scripts/jquery-2.0.3.min.js"></script>
          <script src="Scripts/jquery.responsiveTabs.js" type="text/javascript"></script>
    

<link rel="stylesheet" type="text/css" href="HoverEffectIdeas/css/set2.css" />


<link href="CSS/style_carousel.css" rel="stylesheet" type="text/css" />

<script type="text/javascript" src="Scripts/jquery.flexisel.js"></script>
<script src="News-Ticker/includes/jquery.ticker.js"></script>
</head>
<body>
<?php
include("Includes/header_links.php");
?>
<div class="gridContainer clearfix effect8">
<div id="logotitle">
<img src="Images/Blue_Header_Final2.png">
                    
                    
                    
                    

</div>
<?php
include("Includes/Menu_Nav.php");
?>
<div id="slider" class="fluid_container">
<div class="camera_wrap camera_azure_skin" id="camera_wrap_1">
            <div data-thumb="camera/images/slides/thumbs/bridge.jpg" data-src="camera/images/slides/First_image.jpg">
                <div class="camera_caption fadeFromBottom">
                 Trichy Engineering College
                </div>
            </div>
            <div data-thumb="camera/images/slides/thumbs/leaf.jpg" data-src="camera/images/slides/Second_image.jpg">
                <div class="camera_caption fadeFromBottom">
                </div>
            </div>
            <div data-thumb="camera/images/slides/thumbs/road.jpg" data-src="camera/images/slides/Third_image.jpg">
                <div class="camera_caption fadeFromBottom">
                </div>
            </div>
            <div data-thumb="camera/images/slides/thumbs/sea.jpg" data-src="camera/images/slides/Fourth_image.jpg">
                <div class="camera_caption fadeFromBottom">
                </div>
            </div>
            <div data-thumb="camera/images/slides/thumbs/shelter.jpg" data-src="camera/images/slides/Fifth_image.jpg">
                <div class="camera_caption fadeFromBottom">
                    It supports captions, HTML elements and videos and <em>it's validated in HTML5</em> (<a href="http://validator.w3.org/check?uri=http%3A%2F%2Fwww.pixedelic.com%2Fplugins%2Fcamera%2F&cha rset=%28detect+automatically%29&doctype=Inline&group=0&user-agent=W3C_Validator%2F1.2" target="_blank">have a look</a>)
                </div>
            </div>
           
    </div>
</div>
<div id="content1">
<div id="hist"><h2 style="padding-left:10px; padding-top:10px;font-family:'Linux Libertine Capitals';font-size:29px; color:#900;">Trichy Engineering College<br></h2>
<p><strong>Trichy Engineering College</strong> was founded by <b style="color:#948C03;">Annai Santhiya Educational Health & Charitable Trust</b>, Woraiyur, Tiruchirappalli with the permission of the Government of Tamil Nadu as per G.O.Ms.No 524(Education)dated 24.9.98. The Trust which is dedicated to the cause of promoting technical education as part of its philanthrophic scheme, purchased 41.7 acres of land in Konalai Village, 22km away from Tiruchirappalli on the Chennai Tiruchirappalli NH45 Highway & established the College.</p>
     <p><br>The College was started by <b style="color:#948C03;">Mr.S.Subramaniam</b>, Chairman, Mookambigai College of Engineering who is also the Secretary of this college with the main aim to provide best Engineering education under disciplined culture to the minority students of Tamilnadu and neighbouring states.<a href="about_college.php">Read More</a> >></p>
</div>
    <div id="horizontalTab">
    <ul>
            <li><a href="#tab-1">News</a></li>
            <li><a href="#tab-2">Events</a></li>
            <li><a href="#tab-3">Announcements</a></li>
    </ul>
    <div id="tab-1">
<p>
<marquee behavior="scroll" direction="up" scrolldelay="200" onMouseOver="pause">Welcome</marquee>
</p>
        </div>
        <div id="tab-2">
            <p>Quisque sodales sodales lacus pharetra bibendum. Etiam commodo non velit ac rhoncus. Mauris euismod purus sem, ac adipiscing quam laoreet et. Praesent vulputate ornare sem vel scelerisque. Ut dictum augue non erat lacinia, sed lobortis elit gravida. Proin ante massa, ornare accumsan ultricies et, posuere sit amet magna. </p>
        </div>
        <div id="tab-3">
            <p>Mauris facilisis elit ut sem eleifend accumsan molestie sit amet dolor. Pellentesque dapibus arcu eu lorem laoreet, vitae cursus metus mattis. Nullam eget porta enim, eu rutrum magna. Duis quis tincidunt sem, sit amet faucibus magna. Integer commodo, turpis consequat fermentum egestas, leo odio posuere dui, elementum placerat eros erat id augue.</p>
        </div>
    </div> 
     <script type="text/javascript">
    $(document).ready(function () {
        $('#horizontalTab').responsiveTabs({
            startCollapsed: 'accordion',
            collapsible: true,
            rotate: false,
            setHash: true
</script>
</div>
<div id="carusel_title"><h2 align="center">Our Recruiters</h2></div>
<div id="image_carousel">
<div class="clearout"></div>
<ul id="flexiselDemo3">
    <li><img src="Images/1.jpg" /></li>
    <li><img src="Images/2.jpg" /></li>
    <li><img src="Images/3.jpg" /></li>
    <li><img src="Images/4.jpg" /></li>
</ul>
<div class="clearout"></div>
</div> 
<script type="text/javascript">
$(window).load(function() {
    $("#flexiselDemo1").flexisel();
    $("#flexiselDemo2").flexisel({
        enableResponsiveBreakpoints: true,
        responsiveBreakpoints: {
            portrait: {
                changePoint:480,
                visibleItems: 1
            landscape: {
                changePoint:640,
                visibleItems: 2
            tablet: {
                changePoint:768,
                visibleItems: 3
    $("#flexiselDemo3").flexisel({
        visibleItems: 5,
        animationSpeed: 1000,
        autoPlay: true,
        autoPlaySpeed: 3000,
        pauseOnHover: true,
        enableResponsiveBreakpoints: true,
        responsiveBreakpoints: {
            portrait: {
                changePoint:480,
                visibleItems: 1
            landscape: {
                changePoint:640,
                visibleItems: 2
            tablet: {
                changePoint:768,
                visibleItems: 3
    $("#flexiselDemo4").flexisel({
        clone:false
</script>
<div id="line"><hr></div>
<div id="content2">
<div id="box1_title"><h2 align="center" style="font-family:Times, serif; color:#00F;">Training & Placement</h2></div>
<div id="box1" class="view view-sixth">
<img src="Images/training_placement.jpg" width="380" height="280">
<div id="masking" class="mask"><h2>Training & Placement</h2>
   <p>We care for your career</p>
   <a href="trainandplace.php" class="info">Read More</a></div>
</div> 
<div id="box2_title"><h2 align="center" style="font-family:Times, serif; color:#00F;">Sports</h2></div>
<div id="box2" class="view view-sixth">
<img src="Images/sports.jpg" width="380" height="280">
<div id="masking" class="mask"><h2>Sports</h2>
   <p>Lorem Ipsum is not simply random text</p>
   <a href="Sports.php" class="info" target="_blank">Read More</a></div>
</div> 
<div id="box3_title"><h2 align="center" style="font-family:Times, serif; color:#00F;">Research</h2></div>
<div id="box3" class="view view-sixth">
   <img src="Images/dep.jpg" width="380" height="280">
   <div id="masking" class="mask"><h2>Research</h2>
   <p> Lorem Ipsum is not simply random text</p>
   <a href="Research.php" class="info" target="_blank">Read More</a></div>
</div> 
<div id="box4_title"><h2 align="center" style="font-family:Times, serif; color:#00F;">Media</h2></div>
<div id="box4" class="view view-sixth">
   <img src="Images/media.png" width="380" height="280">
   <div id="masking" class="mask"><h2>Media</h2>
   <p>Lorem Ipsum is not simply random text</p>
   <a href="#" class="info" target="_blank">Read More</a></div></div>
</div> 
</div>


</div>
<?php
include("Includes/Foot.php");
?>
</body>
</html>
Thanks in advance

When you get it uploaded to your remote server, please post back with the URL.
Nancy O.

CS3 Mac - upgrade to CS5 Windows

Hopefully someone here can come up with a definitive answer please?
I have had CS3 installed and registered on a Mac since 2008. I want to upgrade to CS5 but change to Windows as that's my preference with photo editing software (I already use Elements 7-8-9 on a PC).
Looking around, I just cannot find a definitive answer as to whether I can upgrade my Mac CS3 licence to a CS5 Windows licence - I see the question has been asked the other way round a few years back but the answers conflicted: Yes, no problem; No, no way; yes but very complicated, have to write to Adobe. Not much help.
Can someone give me a definitive answer please rather than a guess? There is no way I can afford to buy the complete new product (I'm now a pensioner but have programmed since 1978 and been a photographer since 1961) so an upgrade is my only route. I don't want to buy the upgrade then find it's not working....
Thanks.

This is just a user to user forum so no definative answers here.
Your best bet is to call Adobe and ask. I know you can do it, just don't know the price.
Also, CS6 is set to start shipping on May 6. If you buy CS5 now you will get a free upgrade to CS6.

Cisco 3850 Switch and Windows 7 IP Conflicts

Team,
Last evening (Christmas eve) we setup a pair of Cisco 3850 with IP Base version 3.3.35SE (recommended) and 3.7.0E (very latest).
We got these to replace a very old switch that had died. Attached to this network are windows 7 PC's with all the standard patches, service packs, etc.
with standard port configs - no PC would work - and in fact on each screen we got the windows 7 IP Conflict pop up box.
This seemed very odd to us, as we know these IP's are all static (no dhcp on this segment at all)
we went with a very vanilla config on each port
interface g1/0/1
switchport host
that is it - nothing special at all.
well, after hours of research we found the 3850 has a problem where its "ip device tracking" (even though disabled, by way of NOT being enabled on any interface) will effect the windows 7 PC's ip address in use detection port start up phase!
This is a very big problem. I am frankly SHOCKED Cisco would release a major switch that is going to not work when connected to the average network with windows 7 PC's.
we tried 3+ hours of prescribed work-arounds found when researching this issue -
ip device tracking probe delay 10 (global config)
ip device tracking max 0 (disabed, on interface)
finally,
nmsp attach suppress (interface, however this appears to be a default command in all IOS-XE versions we tried, as the command did NOT show in the show run) . this effected many different nic card vendors (laptops, desktops) and nic card drivers levels from old to very recent.
Finally,
we compared a 3850 in another location to this one - and we never got HIT by this problem before because that 3850 only as TRUNK ports and no windows 7 hosts directly attached.
Doing more research, I found out this also can effect vmware guests running windows SERVER.
this is now a huge issue as we have a scheduled deployment of 3850's throughout our network which is going to be put on hold.
the work-around I came up with which is not great is -
Make ALL the "access" ports connected to PC TRUNK ports and leave the NATIVE vlan (untagged) as the vlan you want the PC's to be in
interface g1/0/1
switchport mode trunk
switchport trunk native vlan 1
this is NOT an acceptable workaround as this presents security issues even with
switchport trunk allowed vlan 1, etc. as the only allowed vlan.
Note: this issue manifested itself and windows 7 PC's were UNABLE to use the network. if you do "ipconfig /all | more" you would see
192.168.0.140(duplicate) and the interface would actually use 169.254.0.239(duplicate) so the duplicate message appeared twice in the output.
1) With and without an SVI interface on each 3850 for the vlan where the windows 7 machines had a duplicate
2) when we had an SVI and the command ip device tracking probe use-svi (or whatever the hidden command is I forget now, but it took it)
3) when we had aaa new-model configured - and not configured - thinking this was some artifact of having aaa turn on something like 802.1x port state
4) when could confirm NO DHCP SNOOPING
5) when we DID not use static IP's - and had the switch assign DHCP addresses - the Windows 7 PC's STILL had duplicates and didnt work for their "Just leased" ip's.
6) when we could confirm ios-xe ip device tracking = disabled with show ip device tracking status, etc.
This is a major problem for this 3850 and unless we get a definitive answer on why this is happening and how we can rectify we are going to have to return our 3850's and get HP Procurve's something I would rather avoid doing. There is NO REASON I can imagine other than older switches who's ports default to ROUTED ports (i.e.. no ip switchport) where a switch should not at least function as a bare switch with essentially a default configuration out of the box.
Any ideas? I'm working well now with the ports ALL in trunking mode with vlan 1 native, but this is not a scalable workaround we can live with as we have security risks of a port not blocking certain vlans from going out ports to pc's, etc. that attackers could send tags on at that point, etc.
thanks,
Joe Brunner
#19366

thanks for replying - i'm not onsite (its a standalone network) - but here is what it is -
Answers in line -
This all stems from a switch replacement correct?
yes a 10 year old Allied Telesyn switch was replaced that had no config - like a hub, just used for connectivity.
Are these 3850's in a stack?
>yes, tested all aspects of the stack many times.
Does it have a managment ip address -If so, is it using the old switch ip address
>old switch had no ip - i made a "management interface" on vlan 1 - BUT no ip on the built-in management interface on the switch.
What are they connecting to? (a router/L3 switch/anohter switch- cisco-HP etc..)
>various other devices - only 1 link back to a single 3750x stack. that switch is "hardened" so to speak to reveal or propagate very little by design.
How are they connected( L3 interface/L2 trunk/access port)
>all ports are left in trunk mode with vlan 1 as the active and untagged port. this was the workaround done to ever get the switch going. in "out of the box" or default mode as we initially wanted (no config) links to windows 7 PC's didnt work. links to linux or other devices non-windows did work!
Are thse switches performing inter-vlan routing or just acting as host switches?
>dumb flat network, no routing.
Is ip routing enabled?
>not unless enabled on 3850 by default. I didnt type "ip routing"
Do you have multiple vlans in your network and if so ar ethe being propergated to these new switches?
Your 7 pcs = are they just client pcs not servers?
client PC's - no servers OS per say.
can you confirm something like ICS isnt enabled (Internet connection sharing) on any of them?
>yes not enabled.
Are the just using one NIC each?
> one machine is dual homed - but we know where its "second nic" goes - to another cisco network which is NOT connected back to this one. we traced all our ports a few times thinking even perhaps some small hub was "reflecting" traffic back to us - like a blackbox. Strangest thing -
default config out of the box - with ALL ports SHUTDOWN EXCEPT the single windows 7 facing port - the windows 7 machine STILL registered an IP CONFLICT when connected to the 3850 - even when it had NO SVI's!!! (i know mind numbing). if you disconnected the pc and connected it to an old cisco switch - it worked fine!!! wow.
sh switch
2 identical 3850's in working stack. power and network stacked. both at same version, etc - upgraded each time with "software install file flash:<long ios name>.bin
tested all power and general 3850 stacking. saw no issues.
sh int trunk
>all ports are now trunks (hence the workaround used to get it up).
has 20 trunks to PC's and some single connected switches (far away on fiber) - all allow only vlan 1 - no other vlans were created - very very simple network. vlan 1 is native
sh vlan brief
>just vlan 1 - no vlans created, checked this many times - had vlan 100 at one point - made sure it was gone over a period of hours.
sh vtp status
not setup - left complete default; no vtp domain set - connected to all switches in transparent model if a switch connection exists.
sh cdp neighbours
cant post (for god and country LOL) but there is one link back to our "core" so to speak - that switch is hardened not to allow any settings to slip over to new switches so hence no vtp, cdp is one to help troubleshooting.
sh ip route
just the L and C routes for the vlan 1 ip address 192.168.17.1/24
no static routes
no vlan interfaces other than int vlan 1
no ip address on g0/0/0 -> the default 3850 management interface hard assigned to the 3850 VRF you cant remove.
int g0/0/0
ip vrf forwarding Switch_Mgmt
i can get over there if you think of anything else key to show the group.
thanks,
Joe

LR 5 Cannon open CR foto's in CS5. Plug in Camera RAW is installed but does not. appeal in LR and PS.

CR foto's in LR 5 will not open in Ps 5. Plug in Camera RAW 8.4 is installed but does not show in LR and PS.

Canon 6D
Verstuurd vanaf mijn iPad
Op 3 mei 2014 om 23:40 heeft Keith_Reeder <[email protected]> het volgende geschreven:
LR 5 Cannon open CR foto's in CS5. Plug in Camera RAW is installed but does not. appeal in LR and PS.
created by Keith_Reeder in Photoshop Lightroom - View the full discussion
Which Canon camera?
The Adobe Camera Raw (ACR) plugin has no relevance to Lightroom, incidentally - doesn't matter how up to date ACR is, Lightroom doesn't use it.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6351284#6351284
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

None of the Nik plugins would open after installing LR5.4

I had LR 5.3 installed and I downloaded the LR5.4 update this afternoon on my Win 7 64 bit Desktop, and afterwards none of the Nik plugins would open and l got an AppCrash error. I uninstalled my current version of Nik, rebooted and download again from the site and installed the newer version of Nik. This did not fix the problem and I have not found any postings with a fix. I then booted my Win8 64 bit Laptop still running LR 5.3 and the Nik Collection works fine. I think LR 5.4 upgrade broke the Nik plugins.
I probably will have to backout the LR5.4 upgrade so that my plugins will work as I need all my software working for this weekend.
Has anyone else had this problem, and if so, do you have a fix.

Under Windows when you install a new version of LR it makes a new version specific folder in Program Files. Your old one is still there. You need to drill down and find the plugins folder in the old version and copy everything to the new plugins folder. A restart of Lr should find the plugins. For some reason Adobe does not install over the top of the last install. It may be a good thing but the plugin installers do their install and Adobe does not migrate their stuff. Under new versions of Windows you'll need to be an Admin to mess with program files folder stuff.It's just another thing to trip you up.
It's not that nobody knows but it's two different companies. Doing the above worked for me. It may not be perfect but it beats not having it. Photomatix has a stand alone so you don't need the plugin but it's still nice.

Issue opening or creating new files in illustrator CS5 windows 7 64bit, "Not Responding"

Issue opening or creating new files in illustrator CS5 windows 7 64bit, program becomes "Not Responding" when opening a file.
I had recently tried a trial version of FontExplorer Pro X, and this issue has come up after the Uninstallation of that program. Any suggestions?

Check for ant third party plugin in the plugin folder....?
Also Check in the new user account?
Message was edited by: Manish_1988

Shutdown and I have a window saying i didn't finish installing

Hello I need help on this:
after I shutdown my Mac whit Yosemite I have a windows saying i didn’t finish installing a program or I don’t now what?
I have the message after:
Error: Not Found
The requested URL/install/agent_update?sessions_id=20A9B4DA-3445-41AA-85A8-309A6601968&emid=f c31460bb5821d7489c783ee0ff3f7cl&app_id=20995000 was not found on this server.
MacPro Retina Mid 2012 2.3GHz i7 8gb Ram
MacBook Pro with Retina display, OS X Yosemite (10.10.2)

Thanks for your help Jeff...actually it turned out that Chrome was the issue and even FIrefox didn't work ....it was slow clunky old IE that eventually got me the chat option and I finally got my issue resolved.....I was getting pretty desperate and am now VERY happy to have my Master Collection back.
Sorry I don't know enough about plugins to help you there but all other functions that I need to do with Chrome work as a rule so I cannot help as far as Adobe is concerned. I know that Chrome often has shock wave errors due to incompatibility with the player on my device but otherwise I'm clueless.

Norwegian charcters Unicode problem, InDesign CS5, Windows 7 64 bit

Hello
I have a problem with moving files from within an indesign plugin. I try to move an image file to the same folder as the inDesign document.
The problem is that the document folder contains norweigian characters. The folder name is: Boligdrøm_FW. If the folder is renamed to: Boligdrom_FW, it works without a problem.
The customer is using InD CS5, Windows 7, 64 bit. Im using Windows 7, 32 bit system, I can not reproduce the problem.
Has anyone encountered this problem?
Does anyone have a quick solutions?
Best regards
/ Pontus
Im using the folowing code to copy the file:
res = MoveFile((LPCWSTR)newFilepath.GrabWString(), (LPCWSTR)documentPath.GrabWString());
Im using this code to get the path to the document:
IDataBase* db = ::GetDataBase(doc);
if (db) {
     const IDFile    *dbSysFile = db->GetSysFile();
      if (dbSysFile) {
          PMString    documentPath("");
          SDKUtilities::GetPathName(*dbSysFile,documentPath);
          IDFile        f(documentPath);
          documentPath.Truncate(f.GetFileName().NumUTF16TextChars());

Not sure if this will help. Look at the PMString translation stuff. ( SetTranslated ).

Windows Media plugin for firefox loads but does not play

Hi,
I am facing problems using windows media plugin on firefox as well as other browsers as well. I guess the problems would lie on the windows media plugin.
Few weeks back, I do not have any problems running windows media player on firefox, however I am unable to do so now. I am able to load the plugin but I cannot play it. I tried testing the plugin on the site below. Thank you for your help.
Windows Media plugin for firefox :
https://support.mozilla.org/en-US/kb/play-windows-media-files-in-firefox?s=windows+media+&r=0&e=es&as=s

Hi,
You can try to fully trust Firefox + its sub processes/files in the security software (antivirus and firewall). You can also try to '''Disable''' other possibly conflicting '''Plugins''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. You could also uninstall it from the Windows Control Panel > Programs and Features and [www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download reinstall it].
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]
[http://kb.mozillazine.org/Issues_related_to_plugins Issues related to Plugins]

CS5 MAC OS - CS5 Windows

I currently own CS5 MAC OS and have never installed it on my computer knowing that I was going to upgrade my computer. I have decided on a new computer that has Windows 8. Can I exchange my CS5 MAC OS version for the CS5 Windows? and is CS5 compatible with Windows 8?
Thanks

No, you can only swap current versions. You would have to upgrade to CS6 or go Creative Cloud. In the latter case the platform switch would be a moot point, anyway. Otehrwise refer to this:
Order an Adobe product platform swap or language swap
Mylenium

I can't get a flashplayer plugin to download and install properly. Have tried several times. HELP?

i can't get a flashplayer plugin to download and install properly. Have tried several times. HELP?

Hi,
Please use the flash player uninstaller utility and remove any instance of flash player.
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows. html
Then restart your system and then try to install adobe flash player again using site http://www.adobe.com

CS5 / Windows 7: Plugin conflict - Class xyz installed twice

Similar Messages

Maybe you are looking for