CS6: divide a clip and deleting the first piece at once?

Hi,
to delete some seconds within one clip I make two cuts and delete the first piece of clip together with closing the gap.
Is there a possibility to combine these steps eg by holding a key combination?
Thanks, mtemp

... sorry, new answer ...
Shift+Delete or Alt+Delete
But watch this screen recording: http://www.youtube.com/watch?v=Xo5IO7aD-sg
after trimming the clip from the beginning (okay, instead of ripple trim) I am deleting two parts of the clip, each time by cuting the clip 2x and deleting the middle piece.
It would be cool to make only one cut (the second one) together with deleting the part before.
... because I have to do this very often

Similar Messages

Only keep clips and delete the rest!

I have 6 different hard drives with various different sporting events which I have used to make a 3 min highlight video. I would like to erase all of the drives and free them up for use and only keep the 3-5 second clips on one external hard drive. Every attempt has proven useless because it says the media goes offline. I am sure this will be a fairly easy solution, however is escapes me currently.

Use the Media Manager.
For an overview of Media Manager, click here.
MtD
Message was edited by: Meg The Dog to fix typo

I can only download 1 photo album from my computer to the ipad, if I download a second one, it deletes and replaces the first one. How can I fix this?

I can only download one photo album from my PC to the Ipad, if I try to download a second album, it deletes the first. Why???

Put all of your albums into one main photos album that you can sync from. You can only select one main folder of photos to sync to the iPad. If you direct iTunes to sync from a different folder the next time that you sync, the first album/folder will be deleted. You have to include all photos with each sync every time that you sync.
So create one main folder for photos and place all of your sub folders into that main photos folder, then when yo sync with iTunes, you can select that main photos folder as the "Sync Photos From" folder in the iTunes photos tab and you can select each of the subfolders within that main folder to sync as well.
But you can only select one level of subfolders to sync. You cannot sync a folder within a folder within the main folder - one level of sub folders only.
Connect the iPad to the computer and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
Select the main photos folder in the Sync Photos From drop down menu
Click on/select all of the albums or sub folders within that main folder that you want to sync.
Click on Apply in the lower right corner of iTunes

How do i delete a part of a clip and rejoin the audio on each side

How (or where in the manual are the instr) l) do i delete a part of a clip and rejoin the audio on each side. This is most frustrating. The join command is never available. If i select an area to delete everything above and below is deleted, whether or not its selected and whether or not its mute. I find in the manual only ways to move entire clips. I need to remove 2 words from a clip in one track.

i'm assuming your working in the multi-track mode since you didn't specify. select the razor blade tool and make two cuts to the audio, one where you want the cut to start, the other where you want the cut to end. select this smaller region that you want to delete and press the delete key.
now you'll have a gap of silence where that unwanted clip was. select the clip(s) to the right of the cut and drag them left. the default behavior is to do a cross fade when the clips overlap. you'll probably have to play with the cross fade amount in order to get it to sound natural.
hope that helps!
scott
PowerMac G5 2.5GHz Mac OS X (10.4.7) MacBook Pro 2.0GHz

I downloaded a audiobook and didn't know it had 2 parts And accidently deleted the first half, how can I get it back?

I downloaded a audiobook and didn't know it had 2 parts And accidently deleted the first half, how can I get it back?

Audiobooks are currently a one-time only download from the store, so unless you copied it over to the Books part of your computer's iTunes library before you deleted it (in which case case you could sync it back to your phone), then you will need to try contacting iTunes Support and see if they will grant you a re-download of it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

What happens when the computer get too full of e-mails? Will it automatically start deleting ... or give you some kind of warning?? I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got

What happens when the computer get too full of e-mails? Will it automatically start deleting ... or give you some kind of warning?? I never delete personal mail right away since I might want to refer back to it, and then the first thing I know, I've got a big backlog.

It will not automatically delete any emails; you will need to do that. You may suffer performance issues in Mail if you let your mailboxes become too bloated. And, aside from Mail, the files take up a lot of room are photos, videos, and music, so you might want to watch those - every once in a while, check how much hard drive space you have and make sure you empty the trash regularly. Checking your hard drive space: highlight your Macintosh HD icon on the desktop; hit Command + I and check the total capacity, and how much is left.

HT4915 When i did my itunes match, there were some duplicated albums and songs. I have gone into my library and deleted the duplicates, but they still show up on my iphone as duplicates. What can i do to get rid of them?

When I did my itunes match, there were some duplicated albums and songs in my library. I have gone back into my library from my computer, and deleted the duplicates. When I did so, itunes did not ask me if I wanted to delete them from the cloud. They are still showing up on my iphone as duplicates in the cloud. What can I do to get them from showing up in my iphone?

They are not on the iphone in the first place. It is just a setting that allows you to see the songs that are available in icloud, but not on your iphone. If you turn the setting to off, then you no longer see the songs that are in icloud, but NOT on your iphone.

File from application server -Read and process and delete the file .

Hi All,
         I writing a ZEE program which will read the file from application server(file will be in text delimat format) and moving the data to internal table and uploadind data base.The part which iam facing problem is -
> I hve read the file from application server like below ,
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
    CLEAR: wa_string, wa_uploadtxt.
    READ DATASET ld_file INTO wa_string.
    IF sy-subrc NE 0.
      EXIT.
    ELSE.
      SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
                                      wa_uploadtxt-name2
                                      wa_uploadtxt-age.
Spliting part i having problem .i need to seperate each field which is seperate from tab delimite and pass it into respective fields of internal table .
Second if another file come to the appicaltion server , wether my first file will be there ? or should i need to delete the first file after redaing how should i proceed further ?.
Regards
SRIRAM...
THANKS In ADVANCE

HI,
1.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
EXIT.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT cl_abap_char_utilities=>horizontal_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
APPEND wa_uploadtxt TO itab.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
2. If the another file get's generated in the application server with same file name then the data in old file get's over written with the new data. You are not required to delete the file.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts.

I "reply"ed to an e-mail message. The next time when I chose to write a new message and type the first letter of the person I replied to earlier, that name and e-mail address appears as a choice included in a pop up list of my contacts. The persons name is not in my contacts and I would like to delete it from popping up. Do you know how I can do this?

The Mail app on the iPad/iPhone/iPod Touch does have an option to clear previous recipients. You can learn to live with it. But if you want to get rid of it, the only way to remove these cached email addresses from the Mail application is restoring the iPhone/iPod Touch as a new phone/iPod. If you restore from backup, the cache is also restored.
This article shows you the screens you will see during the restore: http://support.apple.com/kb/HT1414

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

I purchased a album and only the first part of each song plays, even though the entire length is listed in the file properities. Any Ideas?

I purchased a album and only the first part of each song plays, even though the entire length is listed in the file properities. Any Ideas?

Assuming you are in a region where you are allowed to redownload your past purchases, delete the current copies from your iTunes library and then download again from your purchased history. If the problem persists, or that facility is not available in your region, contact the iTunes Store support staff through the report a problem links in your account history.
tt2

I have Iphone4 and in the phone are about 900 photos. how can Iall the photos transport to my Imac and delete the photos on my iPhone? joe

I have an Iphone4 and in this phone are about 900 photos.
How can I all the photos transport to my Imac and on the Imac definitly store?; and on the Phone delete all this photos?
joe

The first section of the following has instructions for transferring photos from an iPhone to a Mac and deleting the photos from the phone: http://support.apple.com/kb/ht4083

Php delete the first record in an xml doc

So I have a shoutbox, and I only want it to store about 300
results, and the only way I can think of doing that is to fill it
with three hundred results, and then delete the first one every
time a new one is added, but I can't find a way of doing this in
php.
Help?

Hello,
You can use function module CRM_MESSAGES_DELETE.
First of all you'll need to pass an internal table to IT_R_MSGID or IT_R_MSGIDNO with a structure like for example:
ls_msgidno-msgid    = 'CRM_COMPLAINT'.
ls_msgidno-msgno   = '002'.
ls_msgidno-low        = lv_some_input
Then you can call the FM as follows:
CALL FUNCTION 'CRM_MESSAGES_DELETE'
     EXPORTING
       it_r_msgidno = [your internal table]
       iv_ref_object   = [your object, for example an order guid]
       iv_ref_kind      = gc_object_kind-orderadm_h => for a bus. trans. this will be 'A',
                                                                             for an order item, this will be 'B', etc.
     EXCEPTIONS
       OTHERS        = 0.
Kind regards,
Tom.

Firefox deletes the first 2-6 characters typed into the URL box. Why?

Firefox deletes the first couple characters in the URL address box when I type fast.
Example. I want to go to '''mozilla.com'''
When I start to type, I'll see '''mozi''', but then it suddenly disappears and I finish with '''lla.com'''. I instinctively press enter and end up having to re-enter the address ''slowly'' which is a major pain in the rear.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

When I try to delete a clip, iMovie deletes the entire soundtrack!

I am again trying to edit a library program which we filmed. I'm using our "old" macbook running Mavericks and iMovie 9. This is what happened.
Our presenters had a Powerpoint presentation which they wanted us to integrate into the film. I saved it two ways: as a quicktime movie and as a group of photos in iPhoto. Then I began editing the film as usual. When I got to the Powerpoint presentation, I detached the audio from the film, split the clip, and deleted small segments. I then replaced those segments of film with the photos, which I treated as clips and made the same length as the clips I'd deleted.
It's fiddly work, but it was going well, and I had inserted 50 images when something strange happened. I was preparing to add another one, and split the clip, saved, and deleted as usual. This time, I found that, in addition to a 6.6 second clip, iMovie had deleted the entire soundtrack of the presentation! I can't understand why this is suddenly happening, after doing hours of work with no problem, and I can't understand how to stop it. It's maddening!
What I did: checked the disk and repaired permissions, twice. I also went to terminal and ran the daily, weekly, and monthly scripts. Nothing helped. It's still happening.
The macbook is a 2 GHZ Intel core duo with 2 gigs of ram. I have 26 gigs free on the hard drive.
Can anyone help me? I really need to get this film done, and I have more than 60 images to go!
Mary

"how can I see these green lines to find out where the audio is attached?" In the project timeline as shown in my screen shot in my last post - but as you will see below you don't have to worry about this.
Replacing a clip will avoid deleting any attached audio and ensure that the replacement clip has exactly the same duration, avoiding the sync problem.
However there is a still easier way. Don't split the video at all but simply place the Powerpoint slide stills above the video wherever you want them. They will replace the video below (cutaway clip). Now you can move and adjust the duration of the stills without any risk of loosing audio synchronisation.
More details at: http://help.apple.com/imovie/mac/10.0.8/#/movf525350f0
Geoff.

CS6: divide a clip and deleting the first piece at once?

Similar Messages

Maybe you are looking for