CS6 problem with type leading

for three days my PS CS6 crashes.
If I want to label a photo multiple lines, the text as in the example photo appears.
Every time after failure appearance, I reset the PS with CTRL, shift and ALT.
Before the first error message, I had installed nothing else for days.

What’s your OS?
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by pressing command-alt-shift/ctrl-alt-shift while starting Photoshop until the appropriate dialog appears after making sure all customized presets like Actions, Patterns, Brushes etc. have been saved and making a note of the Preferences you’ve changed, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)

Similar Messages

Problem with type conversion and primary key during row fetch

[Note, this error occurs in Oracle XE, APEX 2.1.0.00.39]
I have been having a problem with Automatic Row Fetch:
ORA-01460: unimplemented or unreasonable conversion requested
So in an effort to resolve this, I created a PL/SQL process with the query below and was able to isolate the same error. The problem seems to come from one of the primary keys being a "number" type (APP_ID). The error occurs on the line:
where u.app_id=:P5_APP_ID
I have tried the following variations on this line in an effort to resolve this, but all generate the same error:
1) where to_char(u.app_id) = :P5_APP_ID
2) where u.app_id = to_number(:P5_APP_ID)
3) where to_char(u.app_id) = to_char(:P5_APP_ID)
I've also tried the laternate syntax "&__." and "#__#", but these don't function in the Source field and show up as syntax errors.
Any suggestions are welcome.
begin
for r in (
select app_name, apptype, appcreator, appurl
from application_users u, application_info i
where u.app_id=:P5_APP_ID
and i.app_id=u.app_id
and u.username=:P5_USERNAME)
loop
begin
:P5_APP_NAME := r.app_name;
:P5_APPURL := r.appurl;
exception
when others then
raise_application_error(-20000,'In Loop Failure',true);
end;
end loop;
exception
when others then
raise_application_error(-20000,'Out of Loop Failure',true);
end;
Thanks in advance,
Barney

I found a prior post referencing a similar issue and it was solved by using the "v(__)" syntax. This did resolve my issue, however, I have a quick follow-on which I'm hoping someone can answer quickly...
Since the "v(__)" syntax won't work for the Automatic Row Fetch (at least to the best of my knowledge), I have to do a manual process. However, the manual query as shown above doesn't actually populate any of the form values through the bind variables. They all remain at their cached values from prior data entry on the form.
Is using the bind variables for assignment incorrect, or is there something that must be done to get the updates to show up in the form (ordering of processes, etc.).
My manual process is running in the Load: Before Header state so I would have expected it to update all of the fields.
Thanks in advance,
Barney

Problem with type 4 driver using oracle 10g

HI,
I am unable to establish a type 4 connection with oracle 10g.
Specs:
Driver used: OracleDriver that comes with the ojdbc14.jar along with oracle 10g
JDK used: Tried using both j2sdk1.4.2 and using JDK 5.0
JRE: Again, JRE that was shipped with j2sdk 1.4.2 and JRE 5.0
OS: Windows XP sp2
I am able to compile the following piece of code, so there is no classpath problem, etc.
When I try to run the program, the exception thrown is "No Suitable Driver"
There is no problem with the TNSListener, etc...even if all Oracle related services in 'services.msc' are Started/Stopped, the error remains.
I am, however, able to establish the connection using type1 driver.
Please Help!
import java.sql.*;
import java.io.*;
class TestConn
     Connection connection;
     Statement statement;
     ResultSet resultset;
     public void testConn() throws SQLException, ClassNotFoundException
          DriverManager.registerDriver(new oracle.jdbc.driver.OracleStatement());
          //DriverManager.registerDriver(new sun.jdbc.odbc.JdbcOdbcDriver());
          connection = DriverManager.getConnection("oracle:jdbc:thin:@127.0.0.1:1521", "scott", "tiger");
          //connection = DriverManager.getConnection("jdbc:odbc:dsn1", "scott", "tiger");
          System.out.println("Connection Established");
          statement = connection.createStatement();
          resultset = statement.executeQuery("select ename from emp");
          while(resultset.next())
               System.out.println(resultset.getString(1));
class Test
     public static void main(String args[]) throws SQLException, ClassNotFoundException
          TestConn obj = new TestConn();
          obj.testConn();
};

The JDBC URL should include the database SID. For example, if the database SID is Orcl
connection = DriverManager.getConnection("oracle:jdbc:thin:@127.0.0.1:1521:Orcl", "scott", "tiger");

Photoshop cs6 problems with win8

Problem with cs6 on windows 8 64bit error.
Could not open a scratch file the file is locked...
I change the scrath file in photoshop properties to another place. and some error accured.
Also while open it as administrator it's work but, no Drug and Drop working.
Also I Install Update 13.0.1
Please Help

Noel Carboni wrote:
Building a test environment to double check a stock Windows 8 config and Photoshop CS6 is going to take some time.
As it turned out, not so much.
I had saved a snapshot for a Windows 8 x64 virtual machine when I first installed it, and sure enough I was able to restore that snapshot and install Photoshop successfully in just minutes with no problems.
I was able to run Photoshop CS6 x64 13.0.0 just fine.
I then updated to 13.0.1, which again went without a hitch, and now I'm able to run Photoshop CS6 13.0.1 x64 again without problems.
Note that this is a bone stock, freshly installed Windows 8 system without any tweaks whatsoever. There is just a C: drive and Photoshop's configuration is the stock out-of-box-experience.
I've tried some general dragging and dropping - e.g., of images from Explorer to Photoshop, of layer data from one document to another - with no problems.
I even shut down the virtual machine, added a disk drive (D:), then asked Photoshop to use D: as scratch. It had no problem with that either.
I am willing to say definitively at this point that there is no systemic problem with Photoshop CS6 and WIndows 8 x64 out-of-the-box, though that's not to say there aren't classes of problems with particular video drivers or on systems where the Windows 8 system was installed as an upgrade to an existing system - or even as a clean install but with disk volumes left over from a prior system.
That last scenario is the one I see causing the most problems - that of having a disk drive formatted under a prior version of Windows, which would have had a different Security ID, and not setting the ownership and permissions so as to allow access by the current username.
-Noel

Photoshop CS6 problems with Lion OS!

I am a Mac user of the creator suite and have not upgraded to the Lion OS because of many reported problems with Photoshop and lightroom running under Lion. Does anyone know if CS6 and Lightoom 4 have similar problems, or has Adobe fixed them in these versions?

tamashebi wrote:
I am a Mac user of the creator suite…
"Creator suite"? Yeah, right…

Problem with Type Reference "TYPE' in JCO

Hi All,
I am facing a weard situation when i am creating a custom RFC function module. This FM is called by Java program with JCO. But, if i define the FM parameters with Reference type as 'TYPE', the Java application is not able to get the data. But the same time, if i declare the parameters with 'LIKE', it is working successfully.
Can anybody advise me, why it is behaving differently? Is the problem with JCO which is not able to recognise the 'TYPE' reference or from SAP side?
And, any solution to use 'TYPE' reference successfully?

hi Sailesh,
You are right. SAP doesn't recommend the usage of Like in PROGRAMS/REPORTS - mind it, only REPORTS.
But when it comes to RFC enabled FMs, JCo Understands only LIKE. what you had observed is true. LIKE creates a WA and JCo looks into a workarea. TYPE can refer to a pool of variables but your JCo can't differentiate them. So, you use LIKE.
Again, you use LIKE only Remote enabled FMs not in Reports/Programs. so, you may use TYPE as your company remommends in reports but in RFMs, use LIKE.
Hope this cleared.
Regards
Ak.
PS: If my post helped, don't forget the rewards!

Problems with type ... is table of - values

Hello,
please look at the following procedure:
CREATE OR REPLACE PROCEDURE fct_s_snpdb_ersetzung_einzeln (
p_tnr IN VARCHAR2,
p_ersetzung IN VARCHAR2
IS
-- DECLARE VARIABLES
p_ersetzung_rep VARCHAR2(4000);
v_test_table NUMBER;
TYPE nersetzungtab IS TABLE OF VARCHAR2(4000)
--s_snpdb_tnr_ersetzung.ersetzung%TYPE
INDEX BY BINARY_INTEGER;
v_ersatzliste nersetzungtab;
v_anzersatzliste NUMBER;
v_test VARCHAR2(4000);
v_instr NUMBER;
i NUMBER := 1;
BEGIN
SELECT 1
INTO v_test_table
FROM all_tables
WHERE table_name LIKE 'S_SNPDB_TEMP_ERSETZUNG';
IF (v_test_table <> 1) THEN
EXECUTE IMMEDIATE 'create table s_snpdb_temp_ersetzung (tnr_ersetzung varchar2(19))';
END IF;
EXECUTE IMMEDIATE 'truncate table s_snpdb_temp_ersetzung';
IF (p_tnr IS NOT NULL) THEN
p_ersetzung_rep := '''' || p_tnr || ''',' || p_ersetzung;
p_ersetzung_rep := REPLACE(p_ersetzung, '''', '');
ELSE
p_ersetzung_rep := REPLACE(p_ersetzung, '''', '');
END IF;
v_instr := INSTR (p_ersetzung_rep, ',');
WHILE (v_instr > 0) LOOP
v_test := TRIM(SUBSTR(p_ersetzung_rep, 1, v_instr - 1));
v_ersatzliste(i) := v_test;
p_ersetzung_rep := SUBSTR(p_ersetzung_rep, v_instr + 1);
v_instr := INSTR(p_ersetzung_rep, ',');
i := i + 1;
END LOOP;
--now the problem comes
FOR f IN 1 .. i LOOP
EXECUTE IMMEDIATE 'INSERT INTO s_snpdb_temp_ersetzung VALUES(:tnr)'
USING v_ersatzliste(i);
END LOOP;
END fct_s_snpdb_ersetzung_einzeln;
The inputvalue for p_ERSETZUNG = 'A42020002 39 ','A42020004 55 ','A54017901 02 ','A54017901 03 ','A42020002 60 ','A42020004 15 '
I want to separate each value in separate row of a table.
It runs fine until the "insert into" statement.
Here I get the error "no data found". This means, that the variable v_ersatzliste(i) contains no value. I used the debugger, the separation of the value runs fine, but why the variable v_ersatzliste(i) has no values. I didn't find the problem.
Its not the first time, I use "type ... is table of", but till now I never had problems with this.
What could be the reason for no founded data in my variable.
Thanks in advance
D. Mildner

ohhh yes, you're right.
I think I should go home now :-).
Thanks very much.

Cs6 problems with gtx 780 cuda

hey i have problems with cuda with my gtx 780 when i try to see my cuda version in after effects i cant see the cuda setting and in premier pro i cant enable cuda acceleration i have added pictures

Hi Oriagranat9,
Please check the links below for the supported cards on Premiere Pro & After effects CS6.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-premiere-pro.html#Ad obe%20Premiere%20Pro%20CS6%20system%20requirements
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-effects.html#After Effects CS6 system requirements
make sure that for CUDA/Ray tracing you are using one of the cards listed on the pages.
Thanks

I have Photoshop CS6 problem with Win8

I had Win7 and didn`t have any problems but I bought Win8 upgrade and I install it without any changes of my PC settings ... that was option offered from Win8 insatallation manager.
My problem with Ps CS6 is next my files are open as a tabs and when I "move" image with hand tool the paste board flashing from dark grey to transperant...very anoying.
Sometimes when I "scale" image with move tool image area get black and I can`t see the image scale...
How to fix that Please help I can`t work with normal concentration...very anoying Please help?

Flickering is a known problem with Win8. We and the GPU vendors are working with Microsoft to get it fixed, and seeing if we can implement workarounds until the fix arrives.
The image going dark also means a display driver problem.
You can try turning off GPU drawing in preferences, or setting the GPU mode to basic, for the time being.

CS6 Problem with Custom Paper Sizes

When printing on Epson printers (4800,4880,4900) in the Photoshop print settings dialogue box it won't allow me to print at a custom paper size using the sheet or manual feed settings. The paper feed option defaults to Roll Paper when I create the custom paper size, and then when I change it and try and save the settings it just reverts back to roll paper. If I try and send a print after this then the printer won't accept it because it's being told to print on a roll instead of sheet. Why is this?? I'm using CS6 and OS 10.7 and I've never experienced this problem with any previous Photoshop/ Mac OS X before. Please help!

I use a pc therefor Windows and PC Photoshop. Anyway The way this works in Philosophy windows print dialog you have to set both Photoshop print settings and the printer driver settings. And if Photoshop is to handle colors you must set off the device drivers color management. Photoshop Dialog has a printer setting button. I use that to set the device driver setting like color management off, print quality and custom paper size and source roll paper.
I also wrote a script to tile image into a document for printing on roll paper and eliminate paper waste. http://www.mouseprints.net/old/dpr/PasteImageRoll.html

Problems with type aligning in CS 6

I work for a print shop. My colleague is having an issue that I am unable to duplicate on my computer. She has a customer supplied ID document. The customer is doing an effect with type where it is a spot color (a red) and then the same type is on top with a gradient applied. The client sets the type on top to multiply but when my colleague exports to pdf some of the type on the back side shifts slightly so as not to align properly. Here only fix is to set it to overprint which fixes the problem. However, when I do it on my computer (same OS, Mac 10.6.8) it works fine as multiply. When she does it in CC it works fine.
Obviously, changing to overprint is a good solution but the client is supposed to be sending a lot more work done this way and it would be nice if we didn't always have to change it. I had her trash her preferences in ID. She has reloaded ID. Anybody else have any idea of what could be going on that is causing this?
Thanks in advance.
Rick

Michael, thanks for your reply. I was just going to check the font versions she is using against the ones I am using and stopped because I think she figured it out. It looks like it was a corrupt pdf preset. She made a new one with pretty much the same settings and everything looks good.
Not sure why that would happen but if someone has a theory I would like to hear it. And I had never had an issue with presets getting corrupt.
Rick

CS6 problems with using Zapf Dingbats font

The same font file works perfectly in QXpress (9.5.3) but not in Illustrator (16.0.0) and even less signs show in InDesign (8.0).
I work in Mac OS 10.6.8.
My old ITC Zapf Dingbats was a PS Type 1 font from the last century, version 001.001. (I have not used Dingbats in InDesign yet. I dug up QuarkXPress again today to check and all dingbats work fine there while) InDesign only displays half of them. Then I bought an OTF (Version 2.066;PS 005.000;hotconv 1.0.67;makeotf.lib2.5.33168) of this font today and installed it – with worse results: next to none display in ID.
(I test with a font size of 18 pt.)
I can reach all dingbats via the Glyphs command though, but that's not the idea, is it? They should be under the keys for quick access!
Might have something to do with InDesign's font substitution settings but I don't know where to access them.
(There was a similar question – https://forums.adobe.com/message/1280829#1280829 – but that was over six years ago. I hope there is a smarter solution by now…)
Fred

I never even knew there was a Dingbat fix, as I never had a problem with the font and Frame before.
In Frame 8 all the characters disappeared. When I print to a pdf, I get an error message thusly:
%%[ ProductName: Distiller ]%%
%%[ Error: ZapfDingbats not found. Font cannot be embedded. ]%%
%%[ Error: invalidfont; OffendingCommand: findfont ]%%
Stack:
/Font
(ZapfDingbats)
false
/2
0
/F0
false
/ZapfDingbats
I get no such error message with Frame 7.
Now, I took my elderly Zapf Dingbats font and ran it through Fontographer--I didn't change a thing, I just generated a new Type 1 font. Frame 8 was happy with that one, but Frame 7 displayed some other font instead. I have no idea what the font is, it kinda looks like Arial.
Scratching head...

Problem with type engines in both CS4 & CS5

Hello,
I'm having a strange problem with the type engines in CS4 and 5.
Currently I cannot insert the cursor into the last line of any block of text in order to make edits.
When I try to insert the cursor into the last line it affects only the next-to-the-last line and not the intended line.
Please help.
Thanks for your consideration,
cobaltgreen

Hello,
I'm having a strange problem with the type engines in CS4 and 5.
Currently I cannot insert the cursor into the last line of any block of text in order to make edits.
When I try to insert the cursor into the last line it affects only the next-to-the-last line and not the intended line.
Please help.
Thanks for your consideration,
cobaltgreen

Problems with types using JAX-RPC

Hi,
I have to convert an RMI application into a JAX-RPC application. I thought it was easy but I have some problems with the parameter types and the return types of the remote methods.
For example, how can I pass a java Object as a parameter or as a return type, supposing this object could be anything during runtime? Is there any way to do it because the only types one could use with JAX-RPC are not enough for my application.
Regards,
Vincent

Thanks, that was my mistake.
Instead of using wscompile, you must generate the stub classes with the WTK. Then, you set a reference to the j2me-ws.jar (JSR-172). No additional libraries from the Web Service Development Kit are required.

CS6 problem with Apple Yosemite on iMac

I have a huge problem with my 27" imac having upgraded to Yosemite - bridge is working fine but when I open a photo from bridge into Photoshop I get a montage of images and abstract boxes instead of the photo - If I quit PS and start again it works fine for about 2-3 images then it starts doing the montage thing again - I have had no problems at all for years until this latest upgrade - any suggestions ??

You're hitting some of the video driver bugs in Yosemite.
You can turn off GPU drawing in Photoshop's preferences, then restart Photoshop.
But that disables all the GPU dependent features -- if you need some of the GPU features, then you probably should downgrade to a more stable MacOS version.

CS6 problem with type leading

Similar Messages

Maybe you are looking for