CSS does not start using 11g RH4 SCSI drives

Hi All...
Followed all necessary procedures for setting up oracle. The problem is when I try and get ASM working, I get to the part that says CSS is not running and then do a $ORACLE_HOME/bin/localconfig add as root with all environmental variables set up properly. Furthermore, oracleasm was previously installed, properly configured because I can run the scan, query and list and it comes back correctly.
[root@db raw]# /etc/init.d/oracleasm scandisks
Scanning the system for Oracle ASMLib disks: [  OK  ]
[root@db raw]# /etc/init.d/oracleasm listdisks
VOL1
VOL2
VOL3
VOL4
At the end of this process CSS fails to start. There is nothing placed into the /var/tmp/.oracle directory. I then ran the $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME and get the same result.
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Cleaning up Network socket directories
Setting up Network socket directories
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
While it is running I see:
oracle:/u01/app/oracle> ps -ef | grep crs
root 18399 18142 22 19:31 pts/2 00:00:12 /u01/app/oracle/product/11.1.0/db_1/bin/crsctl.bin check install -wait 600
oracle 18521 18432 0 19:32 pts/4 00:00:00 grep crs
ps -ef | grep css
oracle 18653 18432 0 19:33 pts/4 00:00:00 grep css
[root@db oracle]# tail ocr.loc
ocrconfig_loc=/u01/app/oracle/product/11.1.0/db_1/cdata/localhost/local.ocr
local_only=TRUE
Contents of css log file in $ORACLE_HOME/log/db/client
2009-02-05 15:30:26.331: [ CSSCLNT][2556107008]clsssInitNative: failed to connect to (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db_)), rc 9
Contents of cslcfg log is as follows:
Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:3: Problem reading buffer 53b000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:3: Problem reading buffer 53e000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.403: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:3: Problem reading buffer 53e000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.404: [  OCRRAW][2557164416]ibctx:1:ERROR: INVALID FORMAT
2009-02-05 15:20:14.404: [  OCRRAW][2557164416]proprinit:problem reading the bootblock or superbloc 22
2009-02-05 15:20:14.404: [ default][2557164416]a_init:7!: Backend init unsuccessful : [22]
2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:3: Problem reading buffer 531000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:3: Problem reading buffer 531000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.404: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:3: Problem reading buffer 531000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.404: [  OCRRAW][2557164416]ibctx:1:ERROR: INVALID FORMAT
2009-02-05 15:20:14.404: [  OCRRAW][2557164416]proprinit:problem reading the bootblock or superbloc 22
2009-02-05 15:20:14.404: [ default][2557164416]a_init:7!: Backend init unsuccessful : [22]
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 534000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 533000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.405: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 533000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.405: [  OCRRAW][2557164416]ibctx:1:ERROR: INVALID FORMAT
2009-02-05 15:20:14.405: [  OCRRAW][2557164416]proprinit:problem reading the bootblock or superbloc 22
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 534000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 533000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
2009-02-05 15:20:14.405: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
2009-02-05 15:20:14.485: [  OCRRAW][2557164416]propriowv: Vote information on disk 0 [u01/app/oracle/product/11.1.0/db_1/cdata/localhost/local.ocr] is adjusted from [0/0] to [2/2]
2009-02-05 15:20:14.815: [  OCRRAW][2557164416]iniconfig:No 92 configuration
2009-02-05 15:20:14.815: [  OCRAPI][2557164416]a_init:6a: Backend init successful
There are no logs in the $ORACLE_HOME/bin/log/db/cssd directory.
Here is our disk information:
brw-rw---- 1 root disk 8, 0 Feb 5 09:56 sda
brw-rw---- 1 root disk 8, 1 Feb 5 09:56 sda1
brw-rw---- 1 root disk 8, 2 Feb 5 09:56 sda2
brw-rw---- 1 root disk 8, 16 Feb 5 09:56 sdb
brw-rw---- 1 root disk 8, 17 Feb 5 14:57 sdb1
brw-rw---- 1 root disk 8, 18 Feb 5 14:57 sdb2
brw-rw---- 1 root disk 8, 32 Feb 5 09:56 sdc
brw-r----- 1 oracle oinstall 8, 33 Feb 5 14:57 sdc1
brw-rw---- 1 root disk 8, 48 Feb 5 09:56 sdd
brw-r----- 1 oracle oinstall 8, 49 Feb 5 14:57 sdd1
brw-rw---- 1 root disk 8, 64 Feb 5 09:56 sde
brw-r----- 1 oracle oinstall 8, 65 Feb 5 14:57 sde1
brw-rw---- 1 root disk 8, 80 Feb 5 09:56 sdf
brw-r----- 1 oracle oinstall 8, 81 Feb 5 14:57 sdf1
Raw devices:
crw------- 1 oracle oinstall 162, 1 Feb 5 14:57 raw1
crw------- 1 oracle oinstall 162, 2 Feb 5 14:57 raw2
crw------- 1 oracle oinstall 162, 3 Feb 5 14:57 raw3
crw------- 1 oracle oinstall 162, 4 Feb 5 14:57 raw4
Tried
[root@db init.d]# ./init.cssd start
Startup will be queued to init within 30 seconds.
[root@db init.d]# ps -ef | grep css
root 19962 17418 0 19:50 pts/2 00:00:00 grep css
Okay, so what is wrong here? Why won;t CSS start? Checked every piece of literature and search engine results and tried almost everything...
So, dear forum people... Help.
Regards...

I got same issue with Oracle 10.2.3 on Solaris. This is a single node setting.
Tried the localconfig reset with root, same issue.
Need help.
cssd/cssdOUT.log
setpriority: unable to escalate to priority -20 (13)
client/css.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-03-22 11:44:46.916: [ CSSCLNT][1]clsssInitNative: connect failed, rc 9
alertos631std.log
2009-03-22 11:44:31.921
[client(10951)]CRS-1006:The OCR location /opt/oracle/current/cdata/localhost/local.ocr is inaccessible. Details in /opt/oracle/current/log/os631std/client/clscfg.log.
2009-03-22 11:44:31.924
[client(10951)]CRS-1006:The OCR location /opt/oracle/current/cdata/localhost/local.ocr is inaccessible. Details in /opt/oracle/current/log/os631std/client/clscfg.log.
2009-03-22 11:44:32.486
[client(10951)]CRS-1001:The OCR was formatted using version 2.
clscfg.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-03-22 11:44:31.919: [  OCROSD][1]utread:3: problem reading buffer 2140000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.919: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.919: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.919: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.919: [  OCRRAW][1]propriogid:1: INVALID FORMAT
2009-03-22 11:44:31.920: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.920: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.921: [  OCRRAW][1]ibctx:1:ERROR: INVALID FORMAT
2009-03-22 11:44:31.921: [  OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2009-03-22 11:44:31.921: [ default][1]a_init:7!: Backend init unsuccessful : [22]
2009-03-22 11:44:31.923: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.923: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.923: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.923: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.924: [  OCRRAW][1]propriogid:1: INVALID FORMAT
2009-03-22 11:44:31.924: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.924: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.924: [  OCRRAW][1]ibctx:1:ERROR: INVALID FORMAT
2009-03-22 11:44:31.924: [  OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2009-03-22 11:44:31.924: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 512 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.924: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.924: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
2009-03-22 11:44:31.924: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
2009-03-22 11:44:31.924: [  OCRRAW][1]propriogid:1: INVALID FORMAT
2009-03-22 11:44:32.018: [  OCRRAW][1]propriowv: Vote information on disk 0 [opt/oracle/current/cdata/localhost/local.ocr] is a
djusted from [0/0] to [2/2]
2009-03-22 11:44:32.486: [  OCRRAW][1]propriniconfig:No 92 configuration
2009-03-22 11:44:32.486: [  OCRAPI][1]a_init:6a: Backend init successful
Edited by: user462878 on Mar 22, 2009 9:03 AM
Edited by: user462878 on Mar 22, 2009 9:03 AM

Similar Messages

  • Server does not start using Sun Java SE 1.5.0_07

    The application server launched with startserv using Sun Java SE 1.5.0_07 , seems to hang (uyner SuSE Linx 10.1), it does not start, and stays forever in startserv. performing a kill -3 for the precess we have:
    "process reaper" daemon prio=1 tid=0x08459ab8 nid=0x1bc8 runnable [0xa8c01000..0xa8c01e50]
    at java.lang.UNIXProcess.waitForProcessExit(Native Method)
    at java.lang.UNIXProcess.access$900(UNIXProcess.java:20)
    at java.lang.UNIXProcess$1$1.run(UNIXProcess.java:132)
    "Low Memory Detector" daemon prio=1 tid=0x080c7720 nid=0x1bc6 runnable [0x00000000..0x00000000]
    "CompilerThread0" daemon prio=1 tid=0x080c6178 nid=0x1bc5 waiting on condition [0x00000000..0xaa2c09b8]
    "Signal Dispatcher" daemon prio=1 tid=0x080c5100 nid=0x1bc4 runnable [0x00000000..0x00000000]
    "Finalizer" daemon prio=1 tid=0x080b9b88 nid=0x1bc3 in Object.wait() [0xaa3fc000..0xaa3fd0d0]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xaaa77568> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:116)
    - locked <0xaaa77568> (a java.lang.ref.ReferenceQueue$Lock)
    at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:132)
    at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=1 tid=0x080b8e38 nid=0x1bc2 in Object.wait() [0xaa47e000..0xaa47e150]
    at java.lang.Object.wait(Native Method)
    - waiting on <0xaaa775e8> (a java.lang.ref.Reference$Lock)
    at java.lang.Object.wait(Object.java:474)
    at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
    - locked <0xaaa775e8> (a java.lang.ref.Reference$Lock)
    "main" prio=1 tid=0x0805d5f8 nid=0x1bc0 runnable [0xbfb3a000..0xbfb3b2d8]
    at java.io.FileInputStream.readBytes(Native Method)
    at java.io.FileInputStream.read(FileInputStream.java:194)
    at java.io.BufferedInputStream.read1(BufferedInputStream.java:254)
    at java.io.BufferedInputStream.read(BufferedInputStream.java:313)
    - locked <0xaaa79d20> (a java.io.BufferedInputStream)
    at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:411)
    at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:453)
    at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:183)
    - locked <0xaa591480> (a java.io.InputStreamReader)
    at java.io.InputStreamReader.read(InputStreamReader.java:167)
    at java.io.BufferedReader.fill(BufferedReader.java:136)
    at java.io.BufferedReader.readLine(BufferedReader.java:299)
    - locked <0xaa591480> (a java.io.InputStreamReader)
    at java.io.BufferedReader.readLine(BufferedReader.java:362)
    at com.sun.enterprise.tools.launcher.ProcessLauncher.sendInputToProcessInput(ProcessLauncher.java:410)
    at com.sun.enterprise.tools.launcher.ProcessLauncher.executeBackgroundCommand(ProcessLauncher.java:352)
    at com.sun.enterprise.tools.launcher.ProcessLauncher.executeCommand(ProcessLauncher.java:327)
    at com.sun.enterprise.tools.launcher.ProcessLauncher.process(ProcessLauncher.java:238)
    at com.sun.enterprise.tools.launcher.ProcessLauncher.main(ProcessLauncher.java:158)
    "VM Thread" prio=1 tid=0x080b61b0 nid=0x1bc1 runnable
    "VM Periodic Task Thread" prio=1 tid=0x080c8bd8 nid=0x1bc7 waiting on condition

    The recommended way of starting the application server is to use asadmin command, for ex. <application-server-install-root>/bin/asadmin start-domain. The reason startserv hangs is because it is expecting some input which is automatically provided by the asadmin command.
    - sreeni

  • Premiere Elements 12 does not start after error message: display driver is incompatible

    After successful installation and starting Premiere Elements the following error message appears: "Uncompatible display driver identified. Update the display driver for a better and faster playback performance!" Hopefully my translation from German is helpful enough. I confirmed with OK but unfortunately Premiere Elements does not start. I checked the display driver: it is the most actual one: AMD Radeon HD 7610M. Furthermore the hardware should be OK as well: ASUStek with an Intel Core i5-2450M CPU @2.5 GHz; 6 GB RAM; 64 Bit Windows 7 Service Pack 1. What can I do?

    Moonkeys25
    Recap...please confirm that as of this date, the problem exists with or without the antivirus and firewall(s) disabled.
    Moving forward...
    If you issue was specific to the display card error that you have been getting then probable conclusions
    a. the ADM Radeon H7610M driver version is not up to date
    or
    b. the ADM Radeon H7610 M video card/graphics card installed as is is not compatible with Premiere Elements 12 on your Windows 7 SP1 64 bit
    The updated driver version and the BadDrivers.txt file deletion should have corrected the problem unless there is a gross mismatch between Premiere Elements 12 and ADM Radeon H7610M.
    Did you use the link that John posted to get the auto detection of the latest driver version for the ADM card?
    If we have gone as far as we can with the card and its driver version angle on this, then we can try the generalized troubleshooting drills with no guarantees, just hopes
    1. Delete the Adobe Premiere Elements Prefs file and, if necessary, the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists.
    Local Disk C
    Users
    Owner
    AppData
    Roaming
    Adobe
    Premiere Elements
    12.0
    and in the 12.0 Folder is the Adobe Premiere Elements Prefs file that you delete. If that does not work, then you delete the whole 12.0 Folder in which the Adobe Premiere Elements Prefs file exists. You just need to make sure to have the computer's Folder Option Show Hidden Files, Folders, and Drives active so that you can see the complete path cited.
    2. If "1" has no effect on the issue...uninstall, ccleaner run through time, reinstall with antivirus and firewalls turned off.
    a. Control Panel/Program, select Adobe Premiere Elements 12, right click the entry and click on the Uninstall pop up. Then follow the instructions for the uninstall.
    b. Download and install the free ccleaner for a computer run through to get rid of leftovers from incomplete uninstalls and installs.
    https://www.piriform.com/ccleaner/download
    When you are ready for this step, I will give you a step by step through the ccleaner (regular cleaning part and registry cleaning part).
    c. Reinstall from your installation files or installation disc, with antivirus and firewall(s) disabled.
    Please review above and then let me know if I have interpreted correctly where we are in the troubleshooting. Do not start the above plan until we are in agreement on the details and hoped for results.
    Thanks.
    ATR

  • Oracle CSS does not start up

    Hi guys,
    After installing Oracle 10g on Solaris 9, I could not get the database to start up on the web browser. I was wondering is the problem is due to the error below. If yes, what steps should I take to remedy it?
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'other'..
    Operation successful.
    Oracle Cluster Registry for cluster has been initialized
    Usage: /etc/init.d/init.cssd start
    Usage: /etc/init.d/init.cssd start
    cat: cannot open /css/admin/inittab_local
    Adding to inittab
    /export/home/app/oracle/product/10.1.0/db_1/bin/localconfig:
    /usr/bin/cp: not found
    Sep 6 16:50:06 unknown root: [ID 702911 user.alert] (Oracle CSSD will
    be run out of init)
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS
    service is started
    Thanx!

    Thanks for replying. My database does not work with ASM.
    I've reinstalled Oracle10g on Solaris as I believed that I made some errors for the previous versions.
    Now, for this current Oracle, I can access the database using SQL and dbconsole service to start the EM. However I can't access the EM's database through the web browser after the first reboot.
    i am able to use the EM using the path
    http://unknown:5500/em
    Note: My hostname is unknown as i had used DHCP during installation.
    But once after reboot, the following error msgs appear at the startup and i could not access the EM:
    Oracle CSSD being stopped
    Shutting down CRS daemon
    Shutting down EVM daemon
    Failure 3 at CSS context initialization
    Oracle CSSD will be run out of init
    My qn is if it is my unknown hostname that cause the problem? Or is there any other soln pertaining to the error msg.

  • Deleted events in iMovie 10 does not reduce used space on hard drive

    The used space on my hard drive doesn't   reduce  when I delete  big  footage (events) in iMovie 10.0.1. The deleted events were not moved to system garbage like in iMovie 11.
    Any exlanation for that?

    It depends on how you migrated from iMovie 11. When you convert your Events and Projects from iMovie 11, you have the option to keep your iMovie 11 Events and Projects. If you do, the iMovie 10 Events are created by using Hard Links to the files. This means that iMovie 11 and iMovie 10 both can point to the same file. Therefore, it does not take up any more space to have events for both iMovie 10 and 11. On the other hand, If you delete an Event from iMovie 10, but do not delete the corresponding event from iMovie 11, you do not gain any disk space back.
    Also, note that if you ever move or copy these events to another drive, the hard link will not carry over. At that point, both the events will take up space (basically doubling the space needed.)

  • Cssd does not start in non-RAC environment Thus we can not bring up ASM

    Non-RAC environment
    ASM version = 11.1.0.7
    HP-UX Itanium 11.23
    After power outage, CSSD does not start on non-RAC environment
    Running as root "/sbin/init.d/init.cssd start" does not start cssd
    Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
    but it did not start CSS
    Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
    It started the CSSD and the "crsctl check css" came back with CSS is healthy
    But around 1 minute later it rebooted the server and when it came up again CSS does not start.
    They checked /etc/inittab and it looked fine.
    Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
    Cluster Ready Services completed waiting on dependencies
    Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
    Our test system has been down for a week and we did not get the resolution from Oracle support yet !
    Any pointers are greately appriciated.
    Thanks,
    Dzung

    Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
    2010-07-16 09:42:02.956
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:02.971
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:03.054
    [client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
    y formatted using version 2. Ignore earlier CRS-1006 messages if any.
    2010-07-16 09:42:46.379
    [cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
    Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
    setsid: failed with -1/1
    s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
    s0clssscGetEnvOracleUser: info for user oracle complete
    07/16/10 09:42:36: CSSD starting
    Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
    [    CSSD]CLSS-3001: local node number 0, master node number 0
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
    [    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
    [    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
    [ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
    setsid: failed with -1/1
    dskm_getenv_oracle_user: calling getpwnam_r for user oracle
    dskm_getenv_oracle_user: info for user oracle complete
    07/16/10 18:33:31: Master Diskmon starting
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
    [ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
    [ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
    [ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
    [ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
    [ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
    [ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

  • I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?

    You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite.  It is not listed on their system requirement website:
    Mac OS X 10.9 Mavericks
    Mac OS X 10.8 Mountain Lion
    Mac OS X 10.7 Lion
    Mac OS X 10.6 Snow Leopard*
    Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
    Only case insensitive file-system volumes are supported.
    http://www.graphisoft.com/support/system_requirements/archicad17.html

  • Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I d

    Just installed Firefox 3.6. Firefox will not start and Firefox safemode does not start either. Using Task manager I do not see if started either. If I create a new profile and start from that window, Firefox starts up. I see no error windows/messages. I do have it listed in my Firewall as an exception program with Permit All. What is happening?
    == This happened ==
    Every time Firefox opened
    == After removing Firefox and Reinstalling it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; MS-RTC LM 8)

    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See also [[Basic Troubleshooting|#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

  • Photoshop Elements 7 does not start (after 3 years i used it)

    Yesterday, when i opened my Photoshop Elements 7 (I use it on my PC from 3 years), after the splash screen, an alert windows says to me that there is an error and suggested to restart PC or reinstall product. The program automatically closed itself.
    I'm not able to write the exact sentence of the alert, because now PE7 does not start at all. Not even the alert with the error message.
    I always used this product in this 3 years (from this PC), without problems.
    PE7 was preinstalled and pre-registered by the constructor of PC (Sony-Vaio). So, now i have not even the registration key to reinstall PE7.
    Furthermore, I tried to open Adobe Premiere Elements 7 (also, preinstalled and pre-registered, but never used), and after splash screen the program automatically close itself.
    What can I do??!?
    Thanks you all.

    No result by disconnecting from the network. Even if I restart PC.
    But.... I SOLVED the problem!!!!!
    The problem was "FLEXnet Licensing Service"
    Thanks to last tip, that leads to another failure... I remembered that 2 days ago I tried to optimize my PC by stopping some service with MSConfig. One of the disabled services was "FLEXnet Licensing Service".
    Searching in google, now i know that "Flexnet Licensing service is used by most Adobe products to prevent piracy".
    So, some Adobe products do not start, if Flexnet Licensing service is not running.
    Thank you very much for tips, and help in general... very helpful (to investigate the nature of the problem).

  • IAS does not start when using SSL

    Hello all,
    I hope I hit the correct board for this question and search did find anything useful for my Problem.
    We have a couple of Oracle Databases which are using IAS to serve a PL/SQL and Perl based WepApp. The Databases are 10g (10.2.0.3), and the Servers are running Novell SLES 9 x86_64 (SP 3). We need https on these Machines, so I configured the Server for SSL, created a Certificate using Wallet Manager and so on, exactly as described in the Documentation.
    However when I try to start the HTTP Server with "ssl-enabled" in opmn.xml to enable SSL it does not start any more. It simply cannot load the "mod_ossl.so" Library:
    Logfile says:
    /opt/oracle/product/10.2.0/http_1/Apache/Apache/bin/apachectl startssl: execing httpd
    Syntax error on line 246 of /opt/oracle/product/10.2.0/http_1/Apache/Apache/conf/httpd.conf:
    Cannot load /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.so into server: /opt/oracle/product/10.2.0/http_1/Apache/Apache/libexec/mod_ossl.
    so: undefined symbol: dbm_firstkey
    I have googled and searched Metalink but did not find anything useful. I assume that "dbm_firstkey" refers to the GNU database routines (gdbm), but I am kinda stuck right now. Has anyone stumped upon this maybe?
    Kind Regards
    Maik

    Two issues:
    - this does not look like OracleAS, but like the HTTP Server from the database;
    - you seem to be loading a 32 bit process (apache/httpd) into a 64 bit shell.
    try starting it within 'linux32 bash' instead.

  • After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution

    After downloading mountain lion the internet does not start automatically after start or restart but if I use diagnostics it starts is there a simpler solution?

    Extensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]

  • Outlook 2010 -Mailbox Cleanup wizard does not start when using cached mode

    We are using Outlook 2010 with Exchange 2003 server.
    Currently all users are using online mode, but for some problem, I need to persuade the users to change to use cached mode.
    Recently we find that when user
    mailbox reaches its size limit and try to send an email message in Outlook 2010 that is in cached mode, the email message stays in the
    Outbox and the Mailbox Cleanup wizard does not start. It just prompts
    for "send and receive error". As most of the user would not look for what the error is referring and just call IT to fix. Even worst is, they didn't realize that the mail is still in outbox.
    I find the KB2544027 describing this issue but was not available and suggest to install 2596485.
    http://support.microsoft.com/kb/2544027/en-us
    I've try to install the hotfix and install Office 2010 SP2 but just doesn't work.
    Does anyone know how can I fix it?
    Thanks!

    Hi,
    Based on my research from the internal resource, this issue has been fixed in build 14.0.6126.5000 or less. I suppose that the hotfix not available because it has been involved in the release.
    I’d like to confirm your Office 2010 build number so that we can conduct a deeper analysis on this issue.
    In addition, make sure you have installed the latest update for Office 2010.
    Best Regards,
    Steve Fan
    TechNet Community Support

  • HT1926 download does not start i am using windows 7 and checked the pop-up blocker

    download does not start i am using windows 7 and checked the pop-up blocker

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • I use windows 7 download lightroom 7 trial does not start please help

    i use windows 7 download lightroom 7 does not start please help my adobe id [email protected]

    Maybe try to download Lightroom 4.1 here:
    https://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_lightroom
    Lightroom 7 does not exist
    Frans

  • Opmn service does not start when try to start Oracle BI Services

    Hi ,
    I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
    When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
    If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
    Any Idea how to fix this one.
    Thanks

    Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

Maybe you are looking for

  • IPod Classic won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore?

    iPod won't Sync to computer, says 74gb out of 80gb are used -but there's nothing on ipod. How do I restore? Is anyone else familiar with this problem? It had over 25 movies, thousands of songs & hundreds of pictures, and it seems like they're still o

  • JOptionPane handling problem

    Hi all, I'm imlementing a GUI using JPanel and paintComponent(Graphics g). When i have to display some data on the screen i use JOptionPane.showMessageDialog(...) and the data are displayed. The problem is that, when i close the Message Dialog, it do

  • Page footer

    Hi All! I want to make footer for all portal pages. Our requirement is that footer should be always on the screen. What is the best way of achieving above? Thanks in advance! Regards, DK

  • My phone has not updated to kit kat.

    I heard that the update to kit kat has come out. I live in Arizona. When I go into settings and check for updates my phone would tell me if it was up to date. Now it checks and then goes blank. Why would this occur and why do I not have access to the

  • Screen flickers in IE8

    I created the following site in Dreamweaver CS4 and everything looked good until last week.  I noticed that when clicking on any of the links the screen flickers first.  It only seems to do this in IE not Firefox.  I also created a completely new sit