Oracle CSS does not start up

Hi guys,
After installing Oracle 10g on Solaris 9, I could not get the database to start up on the web browser. I was wondering is the problem is due to the error below. If yes, what steps should I take to remedy it?
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'other'..
Operation successful.
Oracle Cluster Registry for cluster has been initialized
Usage: /etc/init.d/init.cssd start
Usage: /etc/init.d/init.cssd start
cat: cannot open /css/admin/inittab_local
Adding to inittab
/export/home/app/oracle/product/10.1.0/db_1/bin/localconfig:
/usr/bin/cp: not found
Sep 6 16:50:06 unknown root: [ID 702911 user.alert] (Oracle CSSD will
be run out of init)
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS
service is started
Thanx!

Thanks for replying. My database does not work with ASM.
I've reinstalled Oracle10g on Solaris as I believed that I made some errors for the previous versions.
Now, for this current Oracle, I can access the database using SQL and dbconsole service to start the EM. However I can't access the EM's database through the web browser after the first reboot.
i am able to use the EM using the path
http://unknown:5500/em
Note: My hostname is unknown as i had used DHCP during installation.
But once after reboot, the following error msgs appear at the startup and i could not access the EM:
Oracle CSSD being stopped
Shutting down CRS daemon
Shutting down EVM daemon
Failure 3 at CSS context initialization
Oracle CSSD will be run out of init
My qn is if it is my unknown hostname that cause the problem? Or is there any other soln pertaining to the error msg.

Similar Messages

  • CSS does not start using 11g RH4 SCSI drives

    Hi All...
    Followed all necessary procedures for setting up oracle. The problem is when I try and get ASM working, I get to the part that says CSS is not running and then do a $ORACLE_HOME/bin/localconfig add as root with all environmental variables set up properly. Furthermore, oracleasm was previously installed, properly configured because I can run the scan, query and list and it comes back correctly.
    [root@db raw]# /etc/init.d/oracleasm scandisks
    Scanning the system for Oracle ASMLib disks: [  OK  ]
    [root@db raw]# /etc/init.d/oracleasm listdisks
    VOL1
    VOL2
    VOL3
    VOL4
    At the end of this process CSS fails to start. There is nothing placed into the /var/tmp/.oracle directory. I then ran the $ORACLE_HOME/bin/localconfig reset $ORACLE_HOME and get the same result.
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Cleaning up Network socket directories
    Setting up Network socket directories
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started
    While it is running I see:
    oracle:/u01/app/oracle> ps -ef | grep crs
    root 18399 18142 22 19:31 pts/2 00:00:12 /u01/app/oracle/product/11.1.0/db_1/bin/crsctl.bin check install -wait 600
    oracle 18521 18432 0 19:32 pts/4 00:00:00 grep crs
    ps -ef | grep css
    oracle 18653 18432 0 19:33 pts/4 00:00:00 grep css
    [root@db oracle]# tail ocr.loc
    ocrconfig_loc=/u01/app/oracle/product/11.1.0/db_1/cdata/localhost/local.ocr
    local_only=TRUE
    Contents of css log file in $ORACLE_HOME/log/db/client
    2009-02-05 15:30:26.331: [ CSSCLNT][2556107008]clsssInitNative: failed to connect to (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db_)), rc 9
    Contents of cslcfg log is as follows:
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:3: Problem reading buffer 53b000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:3: Problem reading buffer 53e000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.403: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
    2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:3: Problem reading buffer 53e000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.403: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.404: [  OCRRAW][2557164416]ibctx:1:ERROR: INVALID FORMAT
    2009-02-05 15:20:14.404: [  OCRRAW][2557164416]proprinit:problem reading the bootblock or superbloc 22
    2009-02-05 15:20:14.404: [ default][2557164416]a_init:7!: Backend init unsuccessful : [22]
    2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:3: Problem reading buffer 531000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:3: Problem reading buffer 531000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.404: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
    2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:3: Problem reading buffer 531000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.404: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.404: [  OCRRAW][2557164416]ibctx:1:ERROR: INVALID FORMAT
    2009-02-05 15:20:14.404: [  OCRRAW][2557164416]proprinit:problem reading the bootblock or superbloc 22
    2009-02-05 15:20:14.404: [ default][2557164416]a_init:7!: Backend init unsuccessful : [22]
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 534000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 533000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.405: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 533000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.405: [  OCRRAW][2557164416]ibctx:1:ERROR: INVALID FORMAT
    2009-02-05 15:20:14.405: [  OCRRAW][2557164416]proprinit:problem reading the bootblock or superbloc 22
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 534000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:3: Problem reading buffer 533000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-02-05 15:20:14.405: [  OCROSD][2557164416]utread:4: Problem reading the buffer errno 2 errstring No such file or directory
    2009-02-05 15:20:14.405: [  OCRRAW][2557164416]propriogid:1: INVALID FORMAT
    2009-02-05 15:20:14.485: [  OCRRAW][2557164416]propriowv: Vote information on disk 0 [u01/app/oracle/product/11.1.0/db_1/cdata/localhost/local.ocr] is adjusted from [0/0] to [2/2]
    2009-02-05 15:20:14.815: [  OCRRAW][2557164416]iniconfig:No 92 configuration
    2009-02-05 15:20:14.815: [  OCRAPI][2557164416]a_init:6a: Backend init successful
    There are no logs in the $ORACLE_HOME/bin/log/db/cssd directory.
    Here is our disk information:
    brw-rw---- 1 root disk 8, 0 Feb 5 09:56 sda
    brw-rw---- 1 root disk 8, 1 Feb 5 09:56 sda1
    brw-rw---- 1 root disk 8, 2 Feb 5 09:56 sda2
    brw-rw---- 1 root disk 8, 16 Feb 5 09:56 sdb
    brw-rw---- 1 root disk 8, 17 Feb 5 14:57 sdb1
    brw-rw---- 1 root disk 8, 18 Feb 5 14:57 sdb2
    brw-rw---- 1 root disk 8, 32 Feb 5 09:56 sdc
    brw-r----- 1 oracle oinstall 8, 33 Feb 5 14:57 sdc1
    brw-rw---- 1 root disk 8, 48 Feb 5 09:56 sdd
    brw-r----- 1 oracle oinstall 8, 49 Feb 5 14:57 sdd1
    brw-rw---- 1 root disk 8, 64 Feb 5 09:56 sde
    brw-r----- 1 oracle oinstall 8, 65 Feb 5 14:57 sde1
    brw-rw---- 1 root disk 8, 80 Feb 5 09:56 sdf
    brw-r----- 1 oracle oinstall 8, 81 Feb 5 14:57 sdf1
    Raw devices:
    crw------- 1 oracle oinstall 162, 1 Feb 5 14:57 raw1
    crw------- 1 oracle oinstall 162, 2 Feb 5 14:57 raw2
    crw------- 1 oracle oinstall 162, 3 Feb 5 14:57 raw3
    crw------- 1 oracle oinstall 162, 4 Feb 5 14:57 raw4
    Tried
    [root@db init.d]# ./init.cssd start
    Startup will be queued to init within 30 seconds.
    [root@db init.d]# ps -ef | grep css
    root 19962 17418 0 19:50 pts/2 00:00:00 grep css
    Okay, so what is wrong here? Why won;t CSS start? Checked every piece of literature and search engine results and tried almost everything...
    So, dear forum people... Help.
    Regards...

    I got same issue with Oracle 10.2.3 on Solaris. This is a single node setting.
    Tried the localconfig reset with root, same issue.
    Need help.
    cssd/cssdOUT.log
    setpriority: unable to escalate to priority -20 (13)
    client/css.log
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
    2009-03-22 11:44:46.916: [ CSSCLNT][1]clsssInitNative: connect failed, rc 9
    alertos631std.log
    2009-03-22 11:44:31.921
    [client(10951)]CRS-1006:The OCR location /opt/oracle/current/cdata/localhost/local.ocr is inaccessible. Details in /opt/oracle/current/log/os631std/client/clscfg.log.
    2009-03-22 11:44:31.924
    [client(10951)]CRS-1006:The OCR location /opt/oracle/current/cdata/localhost/local.ocr is inaccessible. Details in /opt/oracle/current/log/os631std/client/clscfg.log.
    2009-03-22 11:44:32.486
    [client(10951)]CRS-1001:The OCR was formatted using version 2.
    clscfg.log
    Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
    2009-03-22 11:44:31.919: [  OCROSD][1]utread:3: problem reading buffer 2140000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.919: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.919: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.919: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.919: [  OCRRAW][1]propriogid:1: INVALID FORMAT
    2009-03-22 11:44:31.920: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.920: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.921: [  OCRRAW][1]ibctx:1:ERROR: INVALID FORMAT
    2009-03-22 11:44:31.921: [  OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
    2009-03-22 11:44:31.921: [ default][1]a_init:7!: Backend init unsuccessful : [22]
    2009-03-22 11:44:31.923: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.923: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.923: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.923: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.924: [  OCRRAW][1]propriogid:1: INVALID FORMAT
    2009-03-22 11:44:31.924: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.924: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.924: [  OCRRAW][1]ibctx:1:ERROR: INVALID FORMAT
    2009-03-22 11:44:31.924: [  OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
    2009-03-22 11:44:31.924: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 512 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.924: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.924: [  OCROSD][1]utread:3: problem reading buffer 2146000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2009-03-22 11:44:31.924: [  OCROSD][1]utread:4: problem reading the buffer errno 2 errstring No such file or directory
    2009-03-22 11:44:31.924: [  OCRRAW][1]propriogid:1: INVALID FORMAT
    2009-03-22 11:44:32.018: [  OCRRAW][1]propriowv: Vote information on disk 0 [opt/oracle/current/cdata/localhost/local.ocr] is a
    djusted from [0/0] to [2/2]
    2009-03-22 11:44:32.486: [  OCRRAW][1]propriniconfig:No 92 configuration
    2009-03-22 11:44:32.486: [  OCRAPI][1]a_init:6a: Backend init successful
    Edited by: user462878 on Mar 22, 2009 9:03 AM
    Edited by: user462878 on Mar 22, 2009 9:03 AM

  • Oracle Services Does Not Start

    Hi,
    I have a problem here, I have installed oracle 8.1.5 on the compaq pro liant server and its running on NT 4, just now the server rebooted due to a power failure, when the server finaly starts, the oracle services doest not start (only the oracle Agent is get started). When i chk the event viewer it says .. Could Not Start this service due to a logon failure..
    Could anyone pls let me know the order in which the oracle services should start.
    im sorry if my question confused you, bc'so im confused and stuck
    Thanking u in advance
    regards
    Muraly

    Hi,
    you start all your oracle services except "OracleOraHome81ManagementServer". Specially try to start "OracleOraHome81DataGatherer", "OracleOraHome81TNSListener" and service you have created for your database.
    Atul

  • Oracle database does not start timezone mismatch

    Hi
    I am new on oracle database. My server has restart and now when I try to start oracle database I get this error can anyone help to come out this error.
    oracle@host [~]# /home/u01/app/oracle/oracle/product/10.2.0/db_1/bin/emctl start dbconsole
    TZ set to US/Michigan
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    http://server:1158/em/console/aboutApplication
    Timezone mismatch: The agentTZRegion value (US/Michigan) in
    /home/u01/app/oracle/oracle/product/10.2.0/db_1/database/sysman/config/emd.properties
    does not match the current environment TZ setting(US/Michigan).
    The dbconsole cannot run with this mismatch.
    If US/Michigan is the correct timezone, set your timezone environment variable to US/Michigan and repeat the 'emctl start dbconsole' operation.
    If US/Michigan is not the correct timezone, make sure that the timezone in your environment is correct, and then run the following command in your local Oracle Home: 'emctl resetTZ agent'
    The output of this command will include detailed instructions to follow, to correct the mismatch.
    Thanks in advance
    Edited by: user6550464 on Mar 29, 2009 11:46 PM

    And now You see the reason for error message.
    emctl thinks that time zone is US/Michigan (its from emd.properties file)
    but on linux timezone is set to Asia/Calcutta
    Yoiu should understand which one timezone is correct. If it's US - then talk with server sysadmin, he will set correct one timezone on linux.
    If correct one is on linux - then follow metalink note how to change timezone for agent.
    If none of them are correct, then You will have to follow both steps.

  • Oracle Service does not start after installation of Domain role

    Hi all,
    here is my setting:
    Windows Server 2008 R2 64bit
    ORACLE ONE 11g
    I installed the database and it was working fine until I installed the domain controller role on this server.
    Finally I needed to uninstall this role again and restarted the server several times during this process.
    Now I can not access the database anymore. Listener starts, then stops.
    database service stops with Windows Service Error "Could not start in a timely fashion..." (but quite immediately after starting)
    Checking the database installation, I could not find the ORACLE HOME path in the env variables anymore, also not a trace of other ORACLE paths there.
    This database is REALLY important to me, so if you have an idea how to restore the original state, I would be glad.
    And NO , I haven´t made a backup, since it was more or less 1 day between db setup and domain role setup...
    Thanks in advance...
    Meden
    Edited by: user10859969 on 13.01.2012 14:29

    And No, you shouldn't have installed Oracle on a Domain Controller in the first place, as the activity of a Domain Controller will impair the database performance heavily.
    So the best solution is CTRL-ALT-DEL and start all over again.
    If the database is that important for you, why didn't you install it on a real OS, and why for heaven's sake did you promote the database server to a domain controller?
    Sybrand Bakker
    Senior Oracle DBA

  • Oracle does not start automatically ORA-01031: insufficient privileges

    Hi,
    OS WS2008R2.
    ORACLE 11gR2.
    Oracle Instance does not start with oracle services but if i stop and restart the services it comes up clean.
    Moreover if i change service ownership to Domain\Administrator it again works well.
    Checked registery and all ok. No error in alert.log. Only clue found in Oradim.log.
    ORADIM.LOG....
    C:\Oracle\Ora11g\bin\oradim.exe -startup -sid ptdb -usrpwd * -log oradim.log -nocheck 0
    Thu Nov 15 15:16:15 2012
    ORA-01031: insufficient privileges
    Please help
    Thanks

    1- startup type- Auto
    2- Group to user- ORA_DBA
    3 - you can check log on tab in the service properties and set the username and password who responsible about this services
    As i already stated 3 works. but i want it to work under Local System and not under any user.
    Thanks

  • Cssd does not start in non-RAC environment Thus we can not bring up ASM

    Non-RAC environment
    ASM version = 11.1.0.7
    HP-UX Itanium 11.23
    After power outage, CSSD does not start on non-RAC environment
    Running as root "/sbin/init.d/init.cssd start" does not start cssd
    Oracle support tried "$ASM_HOME/bin/localconfig delete" and "$ASM_HOME/bin/localconfig add"
    but it did not start CSS
    Oracle support tried "$ASM_HOME/bin/localconfig reset $ASM_HOME"
    It started the CSSD and the "crsctl check css" came back with CSS is healthy
    But around 1 minute later it rebooted the server and when it came up again CSS does not start.
    They checked /etc/inittab and it looked fine.
    Before the reboot we saw this message in the /var/adm/syslog/OLDsyslog.log:
    Cluster Ready Services completed waiting on dependencies
    Again it is a NON-RAC environment. We only need CSSD for ASM. We do not have CRS installed on this server.
    Our test system has been down for a week and we did not get the resolution from Oracle support yet !
    Any pointers are greately appriciated.
    Thanks,
    Dzung

    Here is the message in $ASM_HOME/log/<hostname>/alert<hostname>.log :
    2010-07-16 09:42:02.956
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:02.971
    [client(11930)]CRS-1006:The OCR location /db/app/oracle/product/11.1/cdata/localhost/local.ocr is inacce
    ssible. Details in /db/app/oracle/product/11.1/log/rmodbd01/client/clscfg10.log.
    2010-07-16 09:42:03.054
    [client(11930)]CRS-1013:The OCR at /db/app/oracle/product/11.1/cdata/localhost/local.ocr was successfull
    y formatted using version 2. Ignore earlier CRS-1006 messages if any.
    2010-07-16 09:42:46.379
    [cssd(12297)]CRS-1601:CSSD Reconfiguration complete. Active nodes are rmodbd01 .
    Here is the message in $ASM_HOME/log/<hostname>/cssd/cssdOUT.log:
    setsid: failed with -1/1
    s0clssscGetEnvOracleUser: calling getpwnam_r for user oracle
    s0clssscGetEnvOracleUser: info for user oracle complete
    07/16/10 09:42:36: CSSD starting
    Here is the message in $ASM_HOME/log/<hostname>/cssd/ocssd.log:
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 7, from 6, changes 6
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmSetVersions: properties common to all peers: 1,2,3,4,5,6,7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmEstablishMasterNode: MASTER for 174732166 is node(0) birth(174732166)
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmChangeMasterNode: requeued 0 RPCs
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 8, from 7, changes 7
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterCMSync: Synchronizing group/lock status
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmMasterSendDBDone: group/lock status synchronization complete
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 9, from 8, changes 8
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssgmCompareSwapEventValue: changed CmInfo State val 10, from 9, changes 9
    [    CSSD]CLSS-3000: reconfiguration successful, incarnation 174732166 with 1 nodes
    [    CSSD]CLSS-3001: local node number 0, master node number 0
    [    CSSD]2010-07-16 09:42:46.378 [18] >TRACE: clssscSAGEInitFenceCompl: Completing kgzf fence initialization
    [    CSSD]2010-07-16 09:42:46.394 [12] >TRACE: clssgmUpdateEventValue: Client listener incarn val 174732166, changes 1
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c7120) allocated
    [    CSSD]2010-07-16 09:42:46.395 [12] >TRACE: clssgmAllocProc: (60000000003c73a0) allocated
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:42:46.396 [14] >TRACE: Connect request from user root
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7120 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2810) proc(60000000003c7120) pid(12350) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c73a0 - 1,2,3
    [    CSSD]2010-07-16 09:42:46.397 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c73a0) pid(12131) version 11:1:1:4
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(1/600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e7c0)
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmJoinGrock: local grock CSS_INTERNAL_NODE_GROUP new client 600000000096e7c0 with con 60000000003b2b10, requested num 0
    [    CSSD]2010-07-16 09:42:46.402 [12] >TRACE: clssgmAddNodeGrpMember: member (60000000009e0030) added
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.403 [12] >TRACE: clssgmGroupState: requested group state of group localhost_NG, member count 0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDeadProc: proc 60000000003c73a0
    [    CSSD]2010-07-16 09:42:46.404 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c73a0) con(60000000003b2990) skgpid ospid 12131 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of unknown group MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmGroupState: requested group state of group MASTER#DISKMON#GROUP, member count 0
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: KGZF: context successfully initialized, API version 1.4, using pipe default
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssscSAGEInitFenceCompl: kgzf fence initialization successfully completed
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: CSS/GM open for global group registrations
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmReconfigThread: completed for reconfig(174732166), with status(1)
    [    CSSD]2010-07-16 09:42:46.425 [18] >TRACE: clssgmUpdateEventValue: Reconfig Event val 2, changes 2
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmWaitOnEventValue: after Reconfig Event val 2, eval 2 waited 47
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmUpdateEventValue: Reconfig Event val 0, changes 3
    [    CSSD]2010-07-16 09:42:46.425 [1] >TRACE: clssgmStartNMMon: previous reconfig complete, incarnation(174732166)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP#MX new client 600000000096e870 with con 60000000003b2990, requested num -1
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/MASTER#DISKMON#GROUP#MX)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmQueueGrockEvent: lockName(MASTER#DISKMON#GROUP#MX) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmCommonAddMember: global lock grock MASTER#DISKMON#GROUP#MX member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmRegisterClient: proc(1/60000000003c7120), client(3/600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 3 (600000000096e920)
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmJoinGrock: global grock MASTER#DISKMON#GROUP new client 600000000096e920 with con 60000000003b2bd0, requested num 0
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddGrockMember: adding member to grock MASTER#DISKMON#GROUP
    [    CSSD]2010-07-16 09:42:46.425 [12] >TRACE: clssgmAddMember: new master 0 for group(MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group MASTER#DISKMON#GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmAddMember: member (0/60000000009e0230) added. pbsz(72) prsz(0) flags 0x0 to grock (600000000098a170/MASTER#DISKMON#GROUP)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmQueueGrockEvent: groupName(MASTER#DISKMON#GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x78, state 0x0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmCommonAddMember: global group grock MASTER#DISKMON#GROUP member(0/Local) node(0) flags 0x0 0x1e00
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock MASTER#DISKMON#GROUP#MX, member 0
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock MASTER#DISKMON#GROUP#MX
    [    CSSD]2010-07-16 09:42:46.426 [12] >TRACE: clssgmRemoveMember: grock MASTER#DISKMON#GROUP#MX, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:48.405 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:52.444 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:42:56.484 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:00.516 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:04.563 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:08.603 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:12.643 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:16.676 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:20.723 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:24.762 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:28.802 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:32.842 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:36.882 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:40.922 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:44.964 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:49.002 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:53.043 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:43:57.085 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:43:58.354 [12] >TRACE: clssgmAllocProc: (60000000003c7ee0) allocated
    [    CSSD]2010-07-16 09:43:58.355 [14] >TRACE: Connect request from user oracle
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: properties of cmProc 60000000003c7ee0 - 1,2,3
    [    CSSD]2010-07-16 09:43:58.356 [12] >TRACE: clssgmClientConnectMsg: Connect from con(60000000003b2990) proc(60000000003c7ee0) pid(13157) version 11:1:1:4
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(1/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_GROUP new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: new master 0 for group(CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: Adding fencing for member 0, group CLSSSCHECK_GROUP, death 1, SAGE 0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmAddMember: member (0/60000000009e0130) added. pbsz(8) prsz(8) flags 0x0 to grock (6000000000989e50/CLSSSCHECK_GROUP)
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmQueueGrockEvent: groupName(CLSSSCHECK_GROUP) count(1) master(0) event(1), incarn 1, mbrc 1, to member 0, events 0x0, state 0x0
    [    CSSD]2010-07-16 09:43:58.360 [12] >TRACE: clssgmCommonAddMember: global group grock CLSSSCHECK_GROUP member(0/Local) node(0) flags 0x0 0x0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 1 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 1 (600000000096e870), grock CLSSSCHECK_GROUP, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_GROUP
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_GROUP, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRegisterClient: proc(2/60000000003c7ee0), client(2/600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKJOIN recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmJoinGrock: global grock CLSSSCHECK_LOCK new client 600000000096e870 with con 60000000003b2c90, requested num -1
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddGrockMember: adding member to grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmAddMember: granted member(0) flags(0x2) node(0) grock (6000000000989e50/CLSSSCHECK_LOCK)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmQueueGrockEvent: lockName(CLSSSCHECK_LOCK) type(3) count (1/1) xwaiters(1) event(1) to memberNo(0)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmCommonAddMember: global lock grock CLSSSCHECK_LOCK member(0/Local) node(0) flags 0x2 0x2
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExecuteClientRequest: GRKEXIT recvd from client 2 (600000000096e870)
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmExitGrock: client 2 (600000000096e870), grock CLSSSCHECK_LOCK, member 0
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmUnregisterPrimary: Unregistering member 0 (60000000009e0130) in global grock CLSSSCHECK_LOCK
    [    CSSD]2010-07-16 09:43:58.361 [12] >TRACE: clssgmRemoveMember: grock CLSSSCHECK_LOCK, member number 0 (60000000009e0130) node number 0 state 0x14 member refcnt 0 grock type 3
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDeadProc: proc 60000000003c7ee0
    [    CSSD]2010-07-16 09:43:58.362 [12] >TRACE: clssgmDestroyProc: cleaning up proc(60000000003c7ee0) con(60000000003b2990) skgpid ospid 13157 with 0 clients, refcount 0
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:01.125 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:05.164 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:09.196 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:13.236 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:17.284 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:21.322 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:25.316 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:30.333 [8] >TRACE: clssnmSendingThread: sent 5 status msgs to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sending status msg to all nodes
    [    CSSD]2010-07-16 09:44:34.324 [8] >TRACE: clssnmSendingThread: sent 4 status msgs to all nodes
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/client.log:
    [ DISKMON] 07/16/2010 18:33:32.050 dskm_send_command: process 23246 sending command 8 to master diskmon listening on default pipe
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: skgznp_connect failed with error 56815
    [ DISKMON] 07/16/2010 18:33:32.080 dskm_send_command3: error 56815 at location skgznpcon6 - connect() - Connection refused
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmonOUT.log:
    setsid: failed with -1/1
    dskm_getenv_oracle_user: calling getpwnam_r for user oracle
    dskm_getenv_oracle_user: info for user oracle complete
    07/16/10 18:33:31: Master Diskmon starting
    Here is the message in $ASM_HOME/log/<hostname>/diskmon/diskmon.log:
    [ DISKMON] 07/16/2010 09:42:35.573 dskm main: starting up
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:3] dskm_rac_thrd_main: running
    [ DISKMON] 07/16/2010 09:42:35.588 [12350:1] dskm_rac_thrd_creat2: got the post from the css event handling thread
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] dskm main: startup complete
    [ DISKMON] 07/16/2010 09:42:35.589 [12350:1] listening on -> default pipe
    [ DISKMON] 07/16/2010 09:42:35.792 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.385 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:36.906 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.426 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:37.945 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:38.465 clsc_connect: (6000000000700420) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rmodbd01_))
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:1] dskm_slave_thrd_creat: thread created
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_slave_thrd_main1: slave 0 running
    [ DISKMON] 07/16/2010 09:42:46.376 [12350:11] dskm_process_msg5: received msg type KGZM_IDENTIFY (0x0001)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_identify8: client kgzf/12297, version 0x01020000, slave 0, reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=0,gin=0,gmn=0,umemid=0,opid=0,opsn=0,lvl=node
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version1:
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_send_version4: done
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_IDENTIFY (0x0001), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_process_msg5: received msg type KGZM_KGZF_HANDSHAKE (0x0010)
    [ DISKMON] 07/16/2010 09:42:46.389 [12350:11] dskm_proc_kgzf_handshake3: client kgzf/12297, kgzf version 0x00010004, slave 0
    [ DISKMON] 07/16/2010 09:42:46.401 [12350:3] dskm_clss_ini2: successful clsssinit(), clssvers 2.1
    [ DISKMON] 07/16/2010 09:42:46.402 [12350:3] dskm_clss_ini12: node rmodbd01 (0) registered in cluster
    [ DISKMON] 07/16/2010 09:42:46.403 [12350:3] dskm_reid_ini12: diskmon reid cid=3e0391f05e06cfafbf7419d7cf085a44,icin=174732166,nmn=0,lnid=174732166,gid=-1,gin=-1,gmn=-1,umemid=-1,opid=12350,opsn=1279291355,lvl=process
    [ DISKMON] 07/16/2010 09:42:46.424 [12350:3] dskm_sage_config: CELL storage configuration file cellinit.ora not found
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:3] dskm_nfy_kgzf1: notified thread kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake5: got the post from the hb thread
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_proc_kgzf_handshake9: done, kgzf enabled
    [ DISKMON] 07/16/2010 09:42:46.425 [12350:11] dskm_process_msg7: processed msg 0 type KGZM_KGZF_HANDSHAKE (0x0010), retcode 0
    [ DISKMON] 07/16/2010 09:42:46.426 [12350:3] dskm_rac_ini22: CELL storage not configured in the cluster; registered in group MASTER#DISKMON#GROUP as memno 0 (GSDGRPSZ 512)

  • My Oracle 10g XE does not start anymore on Win XP

    Hello,
    I have a problem I do not understand at all. I've successfully installed Oracle10g XE on my Win XP SP2 about one year ago and every works well.
    The last time (6 months ago) I've started my default XE, it works well.
    Today, it does not works anymore ! My Windows service called "OracleServiceXE" does not start anymore. I have an error 1053.
    So I try to start manually my DB using sqlplus :
    sqlplus /nolog
    connect / AS SYSDBA=> I obtains ORA-12560
    The listener service starts well and seems to be OK.
    I tried to set ORACLE_HOME and ORACLE_SID without success.
    I checked my sqlnet.ora, tnsname.ora. Everything seems to be OK.
    I stopped my antivirus software, stopped my firewall.
    I checked I am still in the Adminstrator Group.
    Finally, I tried to reinstall Oracle 10g XE and it does not work anymore either ! The XE instance creation failed
    DIM-00019: service creation error
    O/S-Error: (OS 1053)
    Now, I am lost.
    Does anybody have any suggestion to solve my problem ?
    Many thanks by advance for any help you could give.
    Regards
    Cedric

    Yes, I think so.
    But what ? Many things change in 6 months (Windows fixes, software fixes, RAM upgrade, screen change ...)
    And the logs I found in oracle cannot help me to have an idea.
    Only listener.log, css.log and sqlnet.log have changed.
    I have found the following error in sqlnet.log :
    Fatal NI connect error 12560, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleXE)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=XE)(CID=(PROGRAM=E:\Langage\oraclexe\app\oracle\product\10.2.0\server\BIN\oradim.exe)(HOST=PHOENIX)(USER=gerardce))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
         Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
    Time: 09-FÉVR.-2008 09:28:04
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12560
    TNS-12560: TNS : erreur d'adaptateur de protocole
    ns secondary err code: 0
    nt main err code: 530
    TNS-00530: Erreur d'adaptateur de protocole
    nt secondary err code: 2
    nt OS err code: 0
    I really don't knwo where to start. And I would like to be sure to save my data (via export or something like that).
    Is it possible to have more trace somewhere that can help me ?
    Regards,
    Cedric

  • Oracle service, Listener and http server does not start automatically

    Hello,
    I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
    Thanks, Khawar.

    Hi Rajesh,
    Thanks for reply, I will check this link and will be back if facing problem.
    Regards, Khawar.

  • Opmn service does not start when try to start Oracle BI Services

    Hi ,
    I was able to install OBIEE 11g on my laptop and it worked fine for two days. Today when I try to login to rpd and type my user name and password I get the error that my user name and password is not correct. I tried to restart the machine and now I am not able to start opmn service.
    When I do Start>Oracle Business Intelligence (1)>Start BI Services, the script run and two command line windows open and about 10 minutes later get the last line that server started in RUNNING mode, but some how Oracle Process Manager (instance) service does not start. It started two days ago when I was able to login to OBIEE 11g.
    If I try to go to OBIEE 11g Home page I get this error "Error 500- Internal server error from RFC 2068 Hypertext Transfer Protocol- HTTP/1.1: 10.5.1 500 Internal server error
    Any Idea how to fix this one.
    Thanks

    Maybe you need to tick the "use fully qualified names" check box and make sure that you have the schema object created (as a "folder" between the database and the tables in the physical layer).

  • Oracle Agent Service Does not start

    My agent service of oracle does not start. It stops immediately after starting.
    could you also let me know the role played by agent and listenser service.
    I am using windows 2003 server and version of oracle is 9i

    The listener is a separate process that runs on the database server computer. It receives incoming client connection requests and manages the traffic of these requests to the database server.
    The Intelligent Agents are responsible for the localized execution of tasks and the on-going monitoring of databases and other targets on the managed nodes.Intelligent Agents function independently of the databases and other targets they support.
    agntsrvc.log shows any errors that occur during agent startup.
    Vinod

  • Oracle DBconsole service does not start

    Hi,
    Db 10g 2 on Win XP pro. When I want start Oracle DBconsole service , it does not start. I receive a message from windows to see the provider and says that error code is 2. When I look at event logs of windows it is said abnormal exit and event code is 4. Cosequently it is impossible to see DB control in Internet Explorer browser.
    Thanks for your help.

    Thank you Madrid. I resolved the problem. I had this :
    set ORACLE_SID=ORCL2
    C:\Documents and Settings\> emctl stop dbconsole
    OC4J Configuration issue. C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_LAPTOP-145_ORCL2 not found.
    Actually I had C:\oracle\product\10.2.0\db_1/oc4j/j2ee\LAPTOP-145.b-a-w.com_orcl. Then I should have create OC4J_DBConsole_LAPTOP-145_ORCL2.I created that and no more problem.
    My question is where emctl look for this name OC4J_DBConsole_LAPTOP-145_ORCL2 ? In tnsnames.ora, in sqlnet. ora or some where else ? Thank you.
    can anyone answer please ?
    Message was edited by:
    user522961
    Message was edited by:
    user522961

  • Oracle Windows Sevice does not start (ORA-12640: Authentication adapter initialization failed)

    I converted a physical windows 2003 machine to a virtual hyperv machine.
    The following error occurs in oradim.log when I try to start the Oracle Windows Service on the virtual server:
    ORA-12640: Authentication adapter initialization failed
    I recreated the service and the password file but with no luck.
    I also tried to change sqlnet.ora with the following: (Replaced NTS to NONE)
    SQLNET.AUTHENTICATION_SERVICES= (NONE)
    In this case the service was started but when I tried to connect as sysdba using sqlplus "/ as sysdba" the "ORA-01031: insufficient privileges" error occurs. If you connect using the password then it connects fine. But I would like to be able to connect without a password because I have some scripts that I do not want to hardcode the sysdba password.
    I also removed and readded the administrator password from ORA_DBA group but again with no luck.

    Have you seen this:
    Oracle Database Service on Windows 2000 in AutoStart Mode with Logon as SYSTEM
    (Bug 1397927) If you have installed an Oracle database service on Windows 2000, when logging in as SYSTEM user (Local System), with startup mode set to Automatic, it is possible that the Oracle database service starts but the database does not start automatically. The following error message is written to the ORADIM.LOG file in the ORACLE_BASE\ORACLE_HOME\DATABASE directory.
    ORA-12640: Authentication adapter initialization failed
    It has also been observed that the services like Oracle Enterprise Management Agent, Oracle Enterprise Manager Management Server and Oracle Internet Directory may also fail for the same reason because they cannot connect to the database.
    The workarounds for this problem are:
    Remove the line sqlnet.authentication_services=(NTS) from SQLNET.ORA or set sqlnet.authentication_services=(NONE) in SQLNET.ORA.
    Start the database manually after the Oracle database service has started using SQL*Plus connecting as user name INTERNAL. Note that the INTERNAL user name will not be available after release 8.1.7.
    Start the service as a specific user:
    Choose Start > Settings > Control Panel > Services. The Services dialog box appears.
    Select the service you want to start.
    Click the Startup button. The Service dialog box appears.
    Click This account and specify the user name and corresponding password.

  • Oracle does not start

    Hi,
    I have installed oracle 11g r1 on centos. When the pc is connected to network, then I have no problem to spart oracle, else the oracle does not starts.
    What can I do to start oracle with or without internet connection.
    On windows I used a loopback adapter. Is here any method?
    Thank you

    Hello,
    ORA-12157: TNS:internal network communication errorThis Note of My Oracle Support may give you some solution:
    Local Connections Are Not Working ORA-12157 "TNS:internal network communication error" [ID 399342.1]Is the Loopback Interface well configured ?
    http://www.informit.com/articles/article.aspx?p=25845
    From the below documentation:
    http://download.oracle.com/docs/cd/B28359_01/install.111/b32002/pre_install.htm#BABFHCJG
    "+When you run the ping command on the computer itself, the ping command should return the IP address of the computer.+"
    Hope this help.
    Best regards,
    Jean-Valentin

  • Oracle Fulfillment server does not start and also my concurrent manager is

    The oracle Fulfillment server does not start and also my concurrent manager is down, when ever iam trying to start them i getting error.
    even i restarted my laptop many times
    Iam using WINXP on my laptop.
    Pls help someone
    hsawwan
    Posts: 11,859
    Registered: 03/13/06
    Re: oracle Fulfillment server and concurrent manager problem
    Posted: Oct 13, 2008 9:26 AM in response to: user578071 Reply
    What is the error?
    What does CM log file say?
    Please run cmclean.sql and try to start the CM then.
    Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
    where should i run in apps schema or some other schema, where can i find the log
    as iam using r12

    Duplicate thread ..
    oracle Fulfillment server and concurrent manager problem
    Re: oracle Fulfillment server and concurrent manager problem

Maybe you are looking for

  • Hey apples, how do I get my iPhone 4 sync'ed with my itunes account using my laptop?

    Hey apples, how do I get my iPhone 4 sync'ed with my itunes account using my laptop = how do I add my existing itunes from my account from my laptop to my iPhone 4.  Thanks.

  • Every time I sync with iTunes, certain apps copy over

    Every time I plug my new iPhone 5s (7.01) into my MacBook to sync with iTunes 11.1, the Pages app starts to copy itself from iTunes to the iPhone.  However, it's already installed on the iPhone.  Upon every sync, it copies over again and again... thi

  • Confirmed quantity field

    Dear Guru , We are developing an abap program that can do the the production order confirmation ( like CO15 ) . In order to calculate the open quantity ( "Current to Confirm" field in CO15 ) , we need the "Already Confirmed" field . Is the "Already C

  • Serial works in LabView and not in C++

    Hey, I'm using Qextserialport 1.2 alpha in my project. (QT C++ programing) I got invalid data when I use other windows application while I'm recording the data at hight rate of 400hz. BUT, when I first open the port via HyperTerminal or LabView and t

  • ANT Install on WIN NT

    Can I use JWSDP-1_0 on Windows NT 4? In installation instructions it is mentioned that this WSDP-1_0 is not supported on win NT but can be installed. So if I install it on Win NT where do I need to keep build.properties file? When I try to to install