CTS1.4.1 Samples JDBC test failing with Error in allocating a connection

Tests under CTS1.4.1 samples>>JDBC>>ee>>testConn>> are failing with the following error :
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DSManagedConnectionFactory createManagedConnection
WARNING: RAR5113 : Error creating connection from supplied information: Reason - Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.enterprise.resource.LocalTxConnectorAllocator createResource
WARNING: RAR5038:Unexpected exception while creating resource
Sep 14, 2005 4:27:55 PM com.sun.enterprise.connectors.ConnectionManagerImpl internalGetConnection
WARNING: RAR5117 : Failed to obtain/create connection. Reason : Connection could not be allocated because: Error while parsing address
Sep 14, 2005 4:27:55 PM com.sun.gjc.spi.DataSource getConnection
WARNING: RAR5114 : Error allocating connection : [Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address ]
ERROR: SQL Exception : Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
ERROR: java.sql.SQLException: Error in allocating a connection. Cause: Connection could not be allocated because: Error while parsing address
at com.sun.gjc.spi.DataSource.getConnection(DataSource.java:72)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.getConnection(testConnClient.java:252)
at com.sun.ts.tests.samples.jdbc.ee.testConn.testConnClient.setup(testConnClient.java:91)
But the mystery is that the main set of JDBC tests (outside of samples) in CTS1.4.1 are running fine.
One difference I notice is that the tests that are failing use "createManagedConnection".
The main configurations file "ts.jte" present under %TS_HOME%\bin has all the settings correct. Thats why the main JDBC tests go through fine.
I wonder where these failing tests pick up the bad "address" from.
Any help on this would be greatly appreciated.
Thanks !

CTS is a paid product and any question regarding that should be answered by a Licencee Engineer. Pls contact the LE regard the setup of CTS or any TCK.

Similar Messages

On SCVMM 2012 R2 While adding Loadbalancer with NSVPX-HyperV-10.1-119.7_nc, the Retrieve-LBSystemInfo test fails with Error 21426

Hi,
I'm trying to add Citrix LoadBalancer (NSVPX-HyperV-10.1-119.7_nc) in VMM 2012 R2 and on click of test button, only the "Retrieve-LBSystemInfo" test is failing with Error Code 21426 and exception as below. Whereas, rest of
the test are getting passed.
Can anyone please let me know whether am I missing anything? FYI, I configured citrix lb as per blog: http://kristiannese.blogspot.in/2011/07/load-balancing-and-cloud-computing.html

Your problem sounds similar to this one, except that they're using software raid rather than just pure LVM. If you're using an initrd, you may not have the appropriate modules installed. If you're not using an initrd, then the kernel probably needs LVM support compiled in (not as a module) and could be solved by fixing that. I have never used the ck-patchset, but this should give you an additional data point.
Also comment=systemd.automount will be deprecated soon as I understand it; if you have a need for automounting, x-systemd.automount should be used instead.

Robot Test fails with error message Invalid command line: process must be

public class test
    public static void main(String [] args) throws Exception
        new java.awt.Robot();
}I'm using SLES Linux.
Is there any problem in my machine ?
How Robot tests generally works ?
Thanks !

try:
public class test{
    public static void main(String [] args) {
        try{
           java.awt.Robot myRobot = new java.awt.Robot();
        }catch(Exception e){
          System.out.println("It didn't work");
}from the API:
Note that some platforms require special privileges or extensions to access low-level input control. If the current platform configuration does not allow input control, an AWTException will be thrown when trying to construct Robot objects. For example, X-Window systems will throw the exception if the XTEST 2.2 standard extension is not supported (or not enabled) by the X server.

Error when deploying EAR file: Operation failed with error: java:/app/jdbc/

I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.

How did you create your datasource, can you post the content, without passwords of course.
Greetings.

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

[svn] 1013: Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException

Revision: 1013
Author: [email protected]
Date: 2008-03-28 17:24:25 -0700 (Fri, 28 Mar 2008)
Log Message:
Bug: LCDS-180 - [WebLogic 10.1 on Suse9] MxUnit Dynamic destination "SecurityEmployeeUser" test fails with a NullPointerException
QA: Yes
Doc: No
Details:
This prevents the NPE but for non-servlet endpoints you need to be sure to define your users/roles in Weblogic's default security realm. The test was failing because login was failing, most likely because the regression server wasn't fully configured.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-180
Modified Paths:
blazeds/branches/3.0.x/modules/opt/src/weblogic/flex/messaging/security/WeblogicLoginComm and.java

SSIS custom execute sql task : Failed with error

I am developing a custom SSIS task for running sql task. But it fails with error - I'm trying to set the resultsetbinding to be used by next task in workflow.
Error: 0xC0014054 at CustomSSISTask: Failed to lock variable "User::id" for read access with error 0xC0010001 "The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container
during execution of the package, and the variable is not there. The variable name may have changed or the variable is not being created.".
Error: 0xC002F210 at CustomSSISTask, Execute SQL Task: Executing the query "SELECT id FROM sysobjects WHERE name = 'sysrowsets..." failed with the following error: "Failed to lock variable "User::id" for read access with error 0xC0010001
"The variable cannot be found. This occurs when an attempt is made to retrieve a variable from the Variables collection on a container during execution of the package, and the variable is not there. The variable name may have changed or the variable is
not being created.".
". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Warning: 0x80019002 at CustomSSISTask: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (3) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Task failed: CustomSSISTask
Here is the code sample I'm trying ,
public override DTSExecResult Execute(Connections connections, VariableDispenser variableDispenser,
IDTSComponentEvents componentEvents, IDTSLogging log, object transaction)
MessageBox.Show("testing:");
try
// Add the SQL Task
Package package = new Package();
package.Executables.Add("STOCK:SQLTask");
Microsoft.SqlServer.Dts.Runtime.Variable variable = package.Variables.Add("id", false, "User", 0);
// Get the task host wrapper
TaskHost taskHost = package.Executables[0] as TaskHost;
// Get the task object
ExecuteSQLTask task = taskHost.InnerObject as ExecuteSQLTask;
// Set core properties
task.Connection = connections[0].Name;
task.SqlStatementSource = "SELECT id FROM sysobjects WHERE name = 'sysrowsets'";
//task.SqlStatementSource =
// "SELECT PersonID from [AmalgaSpeedTableData].[SpeedTable].[DimPerson] where PersonIntID = '1'";
task.SqlStatementSourceType = SqlStatementSourceType.DirectInput;
// Add result set binding, map the id column to variable
IDTSResultBinding resultBinding = task.ResultSetBindings.Add();
//IDTSResultBinding resultBinding = task.ResultSetBindings.GetBinding(0);
resultBinding.ResultName = "variable";
resultBinding.DtsVariableName = variable.QualifiedName; //"User::id";
task.Execute(connections, variableDispenser, componentEvents, log, transaction);
catch (Exception ex)
throw new ArgumentException(ex.Message);
return DTSExecResult.Success;
It doesnt throw any exception but custom task fails.
Later I will be also using parametersetbindings to pass some input parameters to this task , since I'm stuck for out param - blocked moving ahead.
Any help would be greatly appreciated.
Thanks
Sang

Hi, could you check whether the following threads help:
http://stackoverflow.com/questions/5787621/ssis-package-failed-to-locak-variable-for-read-access-with-error-0xc0010001
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/40ee7eff-5ec1-426f-a1a8-ab85b40b51aa/error-variable-can-not-be-found-while-executing-package-from-the-net-code?forum=sqlintegrationservices
Regards, Leo

SQL Developer: Failure -Test failed: IO Error: Network Adapter No Conn

SQL Developer: Failure -Test failed: IO Error: The Network Adapter could not establish the connection
Hi,
and sorry this is a really common questions and yes I did do a search, but I don't understand it.
First let me just tell you that Oracle 11g is installed on my second laptop on the same Network.
Secondly I can connect to the Database using Oracle SQL Developer on the laptop Oracle 11g is installed on.
The problem is I want to connect to the database on my main Laptop.
I put in the correct details Hostname 192.168.0.8 ( this is the laptop oracle is installed and running on)
Port 1521
SID dbarudu
****** YES I HAVE PORT FORWARDED
****** YES I HAVE ALLOWED 1521 on the FIREWALL
****** YES I HAVE EVEN SWITCHED OFF THE FIREWALL
Now one more thing you should know ... I don't know nothing about Oracle Servers ok.... so I have just installed Oracle 11g Enterprise and thought done it should be working now.
I just need to use oracle db for a project.
So keep in mind I am a total noob and terms like TNSPING etc mean absolutely nothing to me.
So please help, but help with step by step guide on how to get Oracle to let me have access from another computer.

If the Listener is working, then you should not get the error SQL-Developer error you are reporting.
The listener typically runs using the hostname and port 1521. This means it opens tcp port 1521 on all IP addresses of that platform.
The database server by default will register itself with the local listener. Thus the listener will know the database SID, the database services, whether there are dispatchers to support shared server connections and so on.
The client side needs simply to specify 3 pieces of data to connect:
- the IP of the database server
- the tcp port of the listener
- a database identifier (such as Oracle SID or service name) to connect to
It is really that simple.
If this does not work, the problem falls into 2 broad categories:
a) incorrect installation and configuration of the Oracle software (the out-of-the-box install works unless messed up)
b) some kind of networking issue
To troubleshoot any problem means reducing the complexity of the problem, eliminating multiple moving parts and focusing on specific ones, in order to isolate the problem.
For your problem, this will go something as follows:
- does the listener run? (check if the service is running and whether tcp connections are accepted on the listener port - telnet can be used for the latter)
- does the database successfully registers itself with the listener? (check the services command of the listener and relevant db initialisation parameters)
- does a local TNS (tcp network) connection work on that server? (use SQL*Plus and test on that platform client-server connectivity via tcp to the listener)
- does the client platform have connectivity with the server platform? (use ICMP and telnet to test)
- repeat the TNS test on the client platform using the same working TNS tested on the server platform
Do not use JDBC to test the connection - keep it simple and use sqlplus and the standard Oracle Call Interface (OCI). A full client version of the OCI plus sqlplus can be downloaded under the Oracle InstantClient downloads.
Finally - if you expect to simply install and use Oracle, then use the correct version. Oracle Express Edition aka Oracle XE. Installs and works out-of-the-box. The only manual config change to make is (as far as I recall) to run the listener on all IP addresses of that platform. And this required editing the listener.ora file, changing the HOST parameter and restarting the listener.
Also keep in mind that you have not presented an Oracle error code and Oracle error message. But a client application error message. And that message is pretty much meaningless - it does not point to a specific Oracle networking or Oracle server problem. To diagnose that, we expect a TNS or ORA error number.

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

My IPOD Touch initially had a white screen. I tried correcting this by restoring default settings via ITunes. The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB. I get an error on my PC stating that device attached to USB port is not recognizable. Can anyone help?

Error 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Above from:
http://support.apple.com/kb/TS3694

FAILED with error NT_STATUS_NO_SUCH_USER

Setup:
OS X Server 10.3.9. PDC. ALL clients are a combination of XP and W2K. No macs (sadly).
Situation:
Over the last 3 years I've been plagued with this problem. Symptoms include new authentications are not granted access, but existing connections suffer no degradation of service. The simple solution has been to simply go into Server Admin and "Restart Service" on the Windows service. Done and done. However, this can happen anywhere from once a week to (up to) 3 times a day. Even on weekends when (likely) no one is in the building, though some users may not log out of their workstations - let alone shut down.
Troubleshooting:
1) I set the smbd logs to 1 (debug) and at the point of degrading, I only see this:
***** Begin: I changed nothing; I left out nothing ***********************
[2008/04/14 10:54:09, 1] authods.c:opendirectory_authuser(208)
User "bvolz" authenticated successfully with "dsAuthMethodStandard:dsAuthSMBNTKey"
[2008/04/14 10:54:09, 2] authods.c:opendirectory_smb_pwd_checkntlmv1(424)
opendirectorysmb_pwd_checkntlmv1: [-14071]opendirectoryuser_sessionkey
[2008/04/14 10:54:09, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(305)
checkntlmpassword: authentication for user [bvolz] -> [bvolz] -> [bvolz] succeeded
[2008/04/14 10:54:10, 1] /SourceCache/samba/samba-60.5/samba/source/smbd/service.c:close_cnum(841)
volzsql (192.168.0.3) closed connection to service Shared
[2008/04/14 10:54:11, 0] pdbods.c:getrecords(1015)
dsGetRecordEntry error (-14085)odssam_getsampwnam: [-14085]getsam_recordattributes dsRecTypeStandard:Users no account for 'jpiper'!
[2008/04/14 10:54:11, 2] /SourceCache/samba/samba-60.5/samba/source/auth/auth.c:checkntlmpassword(312)
checkntlmpassword: Authentication for user [jpiper] -> [jpiper] FAILED with error NTSTATUS_NO_SUCHUSER
***** End: I changed nothing; I left out nothing ***********************
2) Recently, I tried to change the default allowed connections per KB Article: http://docs.info.apple.com/article.html?artnum=107899 but that actually only seemed to exacerbate the problem. Today I removed the directories that were added in Netinfo Manager from the KB.
3) I also looked at the nmbd.log and frequently see this, which is equally as troubling:
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
[2008/04/14 10:44:29, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:sync_withdmb(154)
syncwithdmb:
Initiating sync with domain master browser VOLZSERVER<20> at IP 65.16.245.50 for workgroup VOLZINC
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:46:57, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:05, 0] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdpackets.c:process_browsepacket(1050)
processbrowsepacket: Discarding datagram from IP 65.16.245.54. Source name VOLZSERVER<00> is one of our names !
[2008/04/14 10:59:27, 2] /SourceCache/samba/samba-60.5/samba/source/nmbd/nmbdbrowsesync.c:announce_local_master_browser_to_domain_masterbrowser(110)
announcelocal_master_browser_to_domain_masterbrowser:
We are both a domain and a local master browser for workgroup VOLZINC. Do not announce to ourselves.
This type of activity in the log is repeated over and over and over again.
Question:
How do I make it stop? Ok, to be fair, I've searched for the last few years for a solution and I'm not sure why samba is continuing to 'break.' Is there someone here that can enlighten me or poke me in the right direction to why this could be happening? I know little to nothing about samba. I DO know networking, and this could be the issue. The server was handed to me by the previous admin and so to rebuild (the easy solution) isn't so easy because the previous admin didn't document anything he did to build it, like NAT forwarding and such, which, if I don't put back into it, will cause MANY headaches. So, eventually I WILL rebuild from scratch (the time may be nigh), and I think it may fix a misconfiguration, but I fear it will be difficult. This is our production server with no test environment (other than using SuperDuper! to image the drive and play with it over a weekend or something).
Plea:
For help.
Edit: How do I suppress the wiki markup? It's butchering the posted log excerpts. <nowiki></nowiki> doesn't seem to work.

Turns out a printer driver installed on an XP (even W2K(?)) was (apparently?) flooding the OS X SMB server to the point of collapse. Uninstalling the "HP Tools" part of the driver cleared it up. The printer is an HP LJ1300. I had downloaded the full driver from HP.com. I don't know if any/all these conditions need to be matched, but: the printer was on the network using an HP print server JetDirect EX Plus, and the computer(s) in question were connecting directly to it (not via a print server). It's been too long ago, but there were always several errors in the System Log (Win XP Event Viewer) that correlated with the errors on the OS X server.
Proud to say that since that day (10+ months ago) I've not seen it happen again. whew.

USMT Errors - Request to SMP failed with error 0x80004005

The client I am at we are working on using USMT integrated with their OSD task sequence. Yesterday we setup a State Migration Point on the DP that is located at this office. We ran a task sequence for testing purposes that just basically does the Scan
State. The few machines we tested this task sequence on successfully completed the task.
This morning we have tried some more testing and now the task doesn't work. The job fails at the point where it is requesting user store space. The log files shows that it knows about the SMP and that it request access but it fails and continues
on trying to find another available SMP.
The first few attempts the errors are based on "Failed to connect to
\\SERVER.DOMAIN\SMPSTORED_241ADE445 (53)
"Cannot connect to http://SERVER.DOMAIN SMP root share"
"Request to SMP 'http://SERVER.DOMAIN' failed with error (Code 0x80004005) Trying next SMP.
"SMP request to 'http://server.domain" failed with error: E_SMPERROR_ENCRYPTKEY_EMPTY (103)
"ClientKeyRequestToSMP failed (0x80004005)
We have removed the SMP and have re-added it.
Kristopher Turner | Not the brightest bulb but by far not the dimmest bulb.

Hi,
See if this thread helps solve the problem
http://social.technet.microsoft.com/Forums/en-US/c3883768-5a49-45bc-b173-5f7eff8eca53/usmt-capture-task-sequence-failing?forum=configmanagerosd
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Help !!! Re: Fianacial Analytics failed with Error Code = 36331

I am getting an error exactly reported under another Post 'Re: Fianacial Analytics failed with Error Code = 36331'
workflow log shows DB error to OLTP database..
ERROR : LM_36488 [Wed Aug 19 15:05:52 2009] : (5928|2384) Session task instance [SDE_ORA_GLJournals_Full] : [TM_6193 An error occurred while expanding the connection parameter [Database connection name ORA_R12 for database connection variable $DBConnection_OLTP is not well defined.
Can someone point to where the probem is
I have Physical datasource definition of OLTP Warehouse -> Test Connection works fine -->

I am unit Testing the activity SDE_ORA_GLJournals under Execution Plan, i can see an error.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR12_Adaptor:SDE_ORA_GLJournals_Full:(Source : FULL Target : FULL)
          MESSAGE:::
          Irrecoverable Error
          Error while contacting Informatica server for getting workflow status for SDE_ORA_GLJournals_Full
          Error Code = 36331:Unknown reason for error code 36331
          Pmcmd output :
any ideas
girish

Imaging failed with error 175

We recently updated all of our servers with the new ZDM7NWSP1IR4HP1. We distributed the zenworks update through our zenworks for servers so we downloaded the CPK files. Updates were successful except now we have lost our reimage on next boot functionality on all servers. We get the message "imaging failed with error 175". We downloaded and tried the Zenworks Imaging Driver Update for October 2009. We tried this on one server in our environment that we use for testing purposes. This did not fix the problem.
Can anyone help us? We don't see anything additional on the support site to patch.

Originally Posted by spond
Busytech710,
could you please
1) boot to ZENworks maintenance mode
2) export DEVELOPER_LOG=a
3) perform the imaging task and send me the imglog
spond at novell dot com
Shaun Pond
I will be glad to try this and send you the log. I too tried installing the service pack with winsetup.exe and found that also worked for me as far as making image on next boot work. We really want the CPK method to work as we have so many servers and we were able to update them all in one day versus weeks using winsetup.exe. I'll respond back with info you need as soon as possible.

SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

Hi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read ca

SQL Developer: Failure -Test failed: IO Error: Got minus one from a read call
Hi,
I am sorry I know this is probably most frequently asked question, but I have no idea what I should be searching for.
I looked up the error above to see if i could find a solution, but unfortunately I did not.
Right Let me start of with I am a Total Noob.. well it terms of having to install Oracle 11g myself.
In my University they hosted a database, and assigned us a User & pass thats how I have been using SQL Developer,
but since I am not longer a university student. I need to use Oracle Database.
So I downloaded Oracle 11g Enterprise Installed it on my laptop that i don't use much.
Name the Database: Rudu
It did all the installation, and seemed to have succeeded, I went on to the https://localhost:1158/em (Though am not sure why em? whats the deal with that? I thought it would be https://localhost:1158/Rudu) anyways....
Logged in using the System user.
Went to Users and created a user called: RUDUHR
Thought yeah its working... went on to my other laptop opened up SQL Developer.
Created Connection with the following Settings
Con Name: RK
User: RUDUHR
Pass: TEST
Con Type: Basic
Role: Default
Hostname: 192.168.0.8
Port: 1158
SID: Rudu
It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
I even tried using SYSTEM user to connect, but same error
also tried changing SID to em, it made no difference I keep getting the error Status: Failure -Test failed: IO Error: Got minus one from a read call
So ya am clueless... LOL I only know how to create tables and stuff not how to configure a Database.
and just so you know I did forward the port on me router to correct laptop.

It don't work though Why is that??????
192.168.0.8 is laptop that has oracle 11g installed and running.
It is because you don't read documentation.
1158 is the default port for Enterprise Manager
1521 is the default port for Sqlnet.
Your port number is incorrect.
Needless to say, you can create your tables in EM too.
As per the Forums Etiquette post (first link when you get to this page) it is recommended you read documentation before asking Yet Another Doc Question.
Sybrand Bakker
Senior Oracle DBA

CTS1.4.1 Samples JDBC test failing with Error in allocating a connection

Similar Messages

Maybe you are looking for