CTXFISPI.EXE/DLLML.EXE - Purpose? And causes of these erro

Hello. I recently purchased a powerhouse of a computer, Dual GeForce 7950 GT's, 2 GB Twin Corsair Memory, and what seems to be both a blessing and a pain in my ass; The Creative Sound Blaster X-Fi card, the Music version or whatever the exact name is. I installed and updated my software and both beforehand and after my pc takes forever to shut down after it's been on for awhile and on top of it. After 2 or 3 hours of playing I soon can't right click anything, html won't appear in any folder, I can't open more than one explorer window, many things. It took awhile to figure out but then I realized it was the two files listed above. CTX was taking up 56,764K for memory and DLLML was taking up 42,684. I don't know if I Can end these processes withotu damaging anything, I searched the forums before posting but found no deffinite answer. If someone could help me, please let me know ASAP.

First step - uninstall every single creative application
Reinstall the latest driver
Load up your cd, never install Creative monitoring tools, and uncheck "audio drivers"
Run -> msconfig, under startup, uncheck every single creative service you see. (Such as "CTXHELPHER.exe".)
restart your computer. It may take a while, but please be patient.
The next time you start your computer, DLLML.EXE/CTXISPI.EXE will never load automatically, and they will only load when you open Creative applications and they will be closed as long as you quit those applications. Do so and you will not have extremely long shut down time.

Similar Messages

CTXFISPI.EXE causes very long shutdown ti

It's been bugging me since installing the XFI (xtrememusic), as my system now takes ages to shutdown. I finally found out what was causing it by installing User Profile Hi've Cleanup Service (http://www.microsoft.com/downloads/details.aspx?FamilyID=b286e6d-892-4e8-b570-42470e2f3582&displaylang=en), which points to CTXFISPI.EXE being the problem. Here is an excerpt from my Event log after shutting down with UPHclean monitoring:
The following handles in user profile hi've ****\Administrator (S-*-5-2-*********-2049760794-*********-500) have been closed because they were preventing the profile from unloading successfully:
CTXFISPI.EXE (464)
HKCU (0xa8)
HKCU\Software\Classes (0xb0)
HKCU\Software\Classes (0x20)
HKCU\Software\Classes (0x24)
HKCU\Software\Classes (0x30)
HKCU\Software\Classes (0x98)
HKCU\Software\Classes (0xb0)
HKCU\Software\Classes (0xb4)
HKCU\Software\Classes (0xb8)
HKCU\Software\Classes (0xbc)
HKCU\Software\Classes (0xc0)
HKCU\Software\Classes (0xc4)
HKCU\Software\Classes (0xc8)
HKCU\Software\Classes (0xcc)
HKCU\Software\Classes (0xd0)
HKCU\Software\Classes (0xd4)
HKCU\Software\Classes (0xd8)
HKCU\Software\Classes (0xdc)
HKCU\Software\Classes (0xe0)
HKCU\Software\Classes (0xe4)
HKCU\Software\Classes (0xe8)
HKCU\Software\Classes (0xec)
HKCU\Software\Classes (0xf0)
HKCU\Software\Classes (0xf4)
HKCU\Software\Classes (0xf8)
HKCU\Software\Classes (0xfc)
HKCU\Software\Classes (0x200)
HKCU\Software\Classes (0x204)
HKCU\Software\Classes (0x208)
HKCU\Software\Classes (0x20c)
HKCU\Software\Classes (0x20)
HKCU\Software\Classes (0x24)
HKCU\Software\Classes (0x28)
HKCU\Software\Classes (0x2c)
HKCU\Software\Classes (0x220)
HKCU\Software\Classes (0x224)
HKCU\Software\Classes (0x228)
HKCU\Software\Classes (0x22c)
HKCU\Software\Classes (0x230)
HKCU\Software\Classes (0x234)
HKCU\Software\Classes (0x238)
HKCU\Software\Classes (0x23c)
HKCU\Software\Classes (0x240)
HKCU\Software\Classes (0x244)
HKCU\Software\Classes (0x248)
HKCU\Software\Classes (0x24c)
HKCU\Software\Classes (0x250)
HKCU\Software\Classes (0x254)
HKCU\Software\Classes (0x258)
HKCU\Software\Classes (0x25c)
HKCU\Software\Classes (0x260)
HKCU\Software\Classes (0x264)
HKCU\Software\Classes (0x268)
HKCU\Software\Classes (0x26c)
HKCU\Software\Classes (0x270)
HKCU\Software\Classes (0x274)
HKCU\Software\Classes (0x278)
HKCU\Software\Classes (0x27c)
HKCU\Software\Classes (0x280)
HKCU\Software\Classes (0x284)
HKCU\Software\Classes (0x288)
HKCU\Software\Classes (0x28c)
HKCU\Software\Classes (0x290)
HKCU\Software\Classes (0x294)
HKCU\Software\Classes (0x298)
HKCU\Software\Classes (0x29c)
HKCU\Software\Classes (0x2a0)
HKCU\Software\Classes (0x2a4)
HKCU\Software\Classes (0x2a8)
HKCU\Software\Classes (0x2ac)
HKCU\Software\Classes (0x2b0)
HKCU\Software\Classes (0x2b4)
HKCU\Software\Classes (0x2b8)
HKCU\Software\Classes (0x2bc)
HKCU\Software\Classes (0x2c8)
HKCU\Software\Classes (0x2cc)
HKCU\Software\Classes (0x2f8)
Firstly, can something PLEASE be done about this in a driver upgrade. This is a huge bug that really shouldn't have gotten through to end users at all.
Secondly, what exactly is this process doing? Is it safe to disable, or will it stop the card from working. As it stands right now I have to END PROCESS before I can shut down, which as you can imagine is getting very old very quickly. When the process is ended, the system shuts down perfectly normally. With the process running, it takes forever to shutdown.
Please pass this on to the relevant people to look at for the next driver update, or better yet, a quick hotfix.
Thanks
Simon

Hi
You wrote:
"2.When the CTXFIHLP.EXE and CTHELPER.EXE are running, it takes much longer time for winxp and 2000 to restart or shutdown, so I removed them from startwithwindows process list, does this effect the card's function?
3.Now the CTXFISPI.EXE and two DLLML.exe processes can no longer be seen in process list, even after I started them manually"
So you removed CTXFIHLP.exe from the startup list and that solved the problem? I have that one listed ( I think), but CTXFISPI.exe isn't in the list at all (although it is running as a process if I CNTL-ALT-DELETE.
I'll try removing CTXFIHLP tonight and see if that helps with the shutdown, although the UPHClean was point at CTXFISPI as the problem...Message Edited by simonk83 on 2-30-2005 02:9 AM

Can't disable CTDetect.exe and CTXFISPI.exe in services or mscon

If anyone knows how to disable thest two useless services, please let me know.
I've tried the routine methods of utilizing startup in msconfig and CTDetect is unchecked, however it still shows up in Task Manager. CTXFISPI does not show up in msconfig startup but is in Task Manager.
I noticed I only had one Creative service allowed in startup and that was VolPanel, I've subsequently disabled that with the thought that perhaps this was being used by Creative to start up the other two processes. It doesn't seem to have any effect by disabling it, as CTDectect and CTXFISPI still show up.
Also, I've disabled Media Source from auto starting upon Windows boot from the tools option in Media Source itself.
At this point, I cannot get the two processes to stop running and I think it's crap I have to put up with the roughly 8,500 K running in the background.
Any help is appreciated.

Hi Jaydisc,
Thank you for your input, unfortunately that's not the case with these accounts, all the accounts that are stored in this LDAP are OD accounts with OD passwords. These accounts were created using WM directly in the OD machine, and haven't been imported.
The accounts work normally, users can authenticate and work with these with no issues.
The only issue remains that disabling "access account" is not stored.
Further testing shows that changing other settings such as the group, or adding a shortname gets correctly stored.
I wonder which entries should I look for in the logs to find out more about this issue.

How to install .exe applications and the java on m...

hi ! sorry if this has already been discussed but i wanted to know ~~~ how to install .exe applications and the java on my n9 ~~~ ... because i wanted to use plenty of other apps which are not supported but these 2 would help fix the issue

Is it stil not possible to install java applications on N9?
Files containing JAD and JAR-ending in the file name.
I am not familiar with Nokia N9 so I ask even if I suppose that JAR and JAD files are not able to install on a Nokia N9.
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Having trouble installing my licensed LR 5 on a new computer. I have .exe file and also license/serial number. but I am asked only to buy or try.

Old computer died, and I am trying to install LR 5.5 on my new computer. I have run the exe file and have moved all my picture files and the LR data base files to the new computer. When I try to open the program (it is listed in my start menu and is in my system tray, too) a window opens that already shows as selected the option saying I have a license, but there is no way of going forward from that window. I could choose buy or try out or cancel. I'm obviously missing something here and would appreciate any help. Should I perhaps run the exe of LR 5 and then do updates to get to 5.5?
I have checked my Adobe account and LR5 shows as being owned by me. I have NOT downloaded the CC version of LR. I am running Win 7, 64-bit.

Just FYI, apparently, running LR 5 exe works as we would have expected, and
the link to update to 5.5 comes right up when the program is opened. Takes
some time, of course (and wants to create a new catalog as well), but it
does work.
G

When i double-click the mozilla icon, it doesn't start. In the task manager i noted that the process "firefox.exe" appears and desappear after 5 seconds. The problem remains in mozilla safe-mode, but not in windows safe-mode. Thks!

Yesterday i installed the firefox 6.0 on my windows 7 computer. When i double-click the mozilla icon, it doesn't start. I opened the task manager and noted that the process "firefox.exe" appears and desappear after 5 seconds. I tried to start mozilla in safe mode but the problem remains. The only way to use mozilla in my computer is restarting the windows in safe-mode. Last thing: i already tried to reinstall the program. Please help me!

I'm also using Windows 7 on a Lenovo U310 laptop.

Oracle.exe grows and grows tdaily till the system must be restarted

Hello,
I must restart the XE almost daily because oracle.exe grow and grow (from about 300M at the begining till more than 1G). the system is slowly and slowly.
Instalaltion on Windows 2000 SP4 was witout any errors
there are not default parameters (alertXE.log)
Fri Sep 15 05:24:00 2006
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
processes = 150
sessions = 170
cpu_count = 1
shared_pool_size = 130023424
__large_pool_size = 16777216
large_pool_size = 16777216
java_pool_size = 41943040
control_files = D:\ORAXE\ORADATA\XE\CONTROL.DBF
__db_cache_size = 113246208
db_cache_size = 113246208
compatible = 10.2.0.1.0
log_archive_start = FALSE
log_archive_format = XE_%s_%r_%t.arc
db_file_multiblock_read_count= 16
db_recovery_file_dest = D:\oraxe\app\oracle\flash_recovery_area
db_recovery_file_dest_size= 53687091200
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = UNDO
undo_retention = 3600
O7_DICTIONARY_ACCESSIBILITY= FALSE
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
session_cached_cursors = 180
job_queue_processes = 10
audit_file_dest = D:\ORAXE\APP\ORACLE\ADMIN\XE\ADUMP
background_dump_dest = D:\ORAXE\APP\ORACLE\ADMIN\XE\BDUMP
user_dump_dest = D:\ORAXE\APP\ORACLE\ADMIN\XE\UDUMP
max_dump_file_size = 20000000
core_dump_dest = D:\ORAXE\APP\ORACLE\ADMIN\XE\CDUMP
sort_area_size = 1048576
db_name = XE
open_cursors = 300
os_authent_prefix =
star_transformation_enabled= FALSE
query_rewrite_enabled = FALSE
pga_aggregate_target = 251658240
statistics_level = TYPICAL
aq_tm_processes = 1
Can anyone help please?
regards and Thanks
Jacek

I had something similar with 9i a long time ago. I was just using it locally, but it repeatedly kept trying to access the internet, but was blocked, so it kept retrying and writing to the alert log until it grew so big that it filled the hard drive. You might check your files and see exactly what is growing, check your alert log, then deal with the problem, by either disabling something or granting access or whatever is appropriate.

DB connect problem,Disp+Work.exe dies and the work processes die on startup

Dear Experts,
I am getting the error on SAP startup,Disp+Work.exe dies and the work processes die on startup.
I found below error in my DEV_W0 trace as below
*failed to establish conn to np:(local).*
*C Retrying without protocol specifier: (local)*
*C Provider SQLNCLI could not be initialized. See note #734034 for more information.*
*C Using provider SQLOLEDB instead.*
*C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']*
*C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.*
*C Procname: [ExecuteAndFlush - no proc]*
But i could see the user 'pec' is availble in my database users list with db_owner , public permissions also been assigned to it.
However When trying to delete a user on SQL server 2000, we recieve the message "You cannot drop the selected login ID because that login ID owns objects in one or more databases.".
Please refer the below work process trace and please suggest the possible solution..
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, M
B
B Sat Feb 14 15:10:21 2009
B create_con (con_name=R/3)
B Loading DB library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' ...
B Library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll' is "640.00", patchlevel (0.195)
B New connection 0 created
M sysno      00
M sid        PEC
M systemid   560 (PC with Windows NT)
M relno      6400
M patchlevel 0
M patchno    196
M intno      20020600
M make:      multithreaded, Unicode
M pid        3844
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3844) [dpxxdisp.c   1162]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm)          21120     (1320)
M DpShMCreate: sizeof(tm_adm)          29558776     (14772)
M DpShMCreate: sizeof(wp_ca_adm)          24000     (80)
M DpShMCreate: sizeof(appc_ca_adm)     8000     (80)
M DpShMCreate: sizeof(comm_adm)          1160000     (580)
M DpShMCreate: sizeof(vmc_adm)          0     (424)
M DpShMCreate: sizeof(wall_adm)          (384056/329560/64/184)
M DpShMCreate: SHM_DP_ADM_KEY          (addr: 07800040, size: 31492672)
M DpShMCreate: allocated sys_adm at 07800040
M DpShMCreate: allocated wp_adm at 07801B88
M DpShMCreate: allocated tm_adm_list at 07806E08
M DpShMCreate: allocated tm_adm at 07806E30
M DpShMCreate: allocated wp_ca_adm at 09437628
M DpShMCreate: allocated appc_ca_adm at 0943D3E8
M DpShMCreate: allocated comm_adm_list at 0943F328
M DpShMCreate: allocated comm_adm at 0943F340
M DpShMCreate: allocated vmc_adm_list at 0955A680
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0955A6A8
M DpShMCreate: allocated wall_adm at 0955A6B0
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Sat Feb 14 15:10:22 2009
M calling db_connect ...
C Thread ID:3868
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'E:\usr\sap\PEC\SYS\exe\run\dbmssslib.dll'
C dbmssslib.dll patch info
C    patchlevel   0
C    patchno      195
C    patchcomment DBCON: database names must not start with digits (1078650)
C np:(local) connection used on CAMBSVR15
C CopyLocalParameters: dbuser is 'pec'
C
C Sat Feb 14 15:10:23 2009
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Sat Feb 14 15:10:26 2009
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 'pec' setuser 'pec']
C sloledb.cpp [ExecuteAndFlush,line 5989]: Error/Message: (err 4604, sev 0), There is no such user or group 'pec'.
C Procname: [ExecuteAndFlush - no proc]
C setuser 'pec' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0      performing CON [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> <message text not available> [dbsh#3 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error 0      performing CON [dblink#3 @ 428] [dblink 0428 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 428] [dblink 0428 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c   1280]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   9621]
M
M Info for wp 0
M
M    stat = 4
M    reqtype = 1
M    act_reqtype = -1
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source = 255
M    last_tid = 0
M    last_mode = 0
M    int_checked_resource(RFC) = 0
M    ext_checked_resource(RFC) = 0
M    int_checked_resource(HTTP) = 0
M    ext_checked_resource(HTTP) = 0
M    report = >                                        <
M    action = 0
M    tab_name = >                              <
M
M *****************************************************************************
M *
M * LOCATION    SAP-Server cambsvr15_PEC_00 on host cambsvr15 (wp 0)
M * ERROR       tskh_init: db_connect
M *
M * TIME        Sat Feb 14 15:10:26 2009
M * RELEASE     640
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        9806
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 254]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3844) [dpnttool.c   357]
I would greatly appriciate your quick response, Since it is a production issue.
Many Thanks,
Vinod

Hi Rohit and Subhadip,
My problem was solved, thanks for your effort.
reason is that, user 'pec' not been associated with login user for the SQL server.
subha : when i execute the first command which you suggested, but couldn't find any user's list.
so i didn't tried with the second command. just to give a final try i have executed the script like below and its worked out.
USE PEC
GO
EXEC sp_change_users_login 'update_one','pec','pec'
GO
Now i see that all work process are starting,,,thank you so much rohit and subhadip
I could have try this first ,when you guys suggested since i couldn't find any output with the first command i didn't proceed with second one.
Since deleting and creating method doesn't seems to be a good, i have just to give a try executed the second command and its worked.
Thanks for your time and patience
Many Thanks,
Vinod

Boot Camp Question .... I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp. If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"

I just bought a 2013 late model Mac Book Pro Retina and am wondering if it is worth installing windows through boot camp.
If I install the windows component in order to run an exe file and its component "Declans Korean Flash Cards"... will it make my mac suseptible to viruses overall due to having a windows component? also will it make my mac slower as well

If you are only going to use one or two window only programs then I wouldn't waste the space. Try WinonX it allows you to install exe. Files on Mac without installing windows.

HELP. Lsass.exe error and cannot log in to windows on Thinkpad T 42

hi, i messed up with registry ..safe mode, access IBM dont help ..... rescue and recovery is on same HD but i have not made recovery CDs .
Is it possible to make these CDs if i take out HD from T42 and use it as external HD on my desktop if so Can some one help me step by step or any other advice to fix lsass.exe error and login into windows

Hi AbbyTaylor,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you are getting lsass.exe error while trying to login to your Lenovo ThinkPad T400.
Lsass.exe is responsible for how Microsoft Windows handles security and security related policies, authority domain authentication, and Active Directory management on your computer.
Have you tried to start in Safe Mode as well as with the last know good configuration?
Boot with your Windows system CD and go into the repair console. Try performing a system repair.
Refer this knowledgebase and see if it helps!
Best regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

AppleMobileBackup.exe crashes and I can't update my iPod. Please help!

Help!
When backing up my iPod a file called AppleMobileBackup.exe errors and closes which stops my backing up process. I have a iPod touch first generation (which has MANY apps) and the newest iTunes.
Please help me! I want to update my iPod but if it chrashes and isn't backed up... Well I need to be able to back up the iPod but it fails.

It sounds like you had a computer problem and now the iPod thinks it was synced to another iTunes library.
If you go to iTunes>Prefernces>Advanced yu will see whnere the media library is located.
Are you logged into the same account on the computer computr login screen, not in iTunes).
The media library is in the directoy with your login.

*.exe requested and there are no configured proxyies

Whilst requesting a exe the following was captured in the
$ tail -f
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/evonws/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/callcontrol/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/idm/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/pimsflash/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/security/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/soapClient/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/evonweb/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/evon/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/CSApps/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/ws- uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/ssoRedirect/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/cvon/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/wsdeployment/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/pimsws/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/syncml/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key:/bpd_properties-server/ uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: testing for uri with key: uri:/pims/synctools/downloads/DST.exe
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: Found it in starts with
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: Calling proxyTarget.getNext()[Lnet.bellsouth.asg.proxy.model.ProxyTarget;@11671b2
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: WARNING uri /pims/synctools/downloads/DST.exe requested and there are no configured proxyies
[28/Nov/2006:13:19:24] info (10524): CORE3282: stdout: /pims/synctools/downloads/DST.exe
$ tail -f access
<ip> - - [28/Nov/2006:13:54:02 -0500] "GET /pims/synctools/downloads/DST.exe HTTP/1.1" 404 292
/pims/synctools/downloads/DST.exe HTTP/1.1" 404 292
<ip>- - [28/Nov/2006:14:48:51 -0500] "GET /pims/synctools/downloads/DTS.exe HTTP/1.1" 405 124
Interestingly enough,
mime.types:type=magnus-internal/cgi exts=cgi,exe,bat
Any inputs would be greatly appreciate.

Perhaps let me restate this issue -
Pointing the browser to https://somedomain.net/downloads/downloads/downloads/executable.exe results in a 405, 404 errors. This is served by a 6.1 SunOne webserver. Since, the mime type for exe is addressed by CGI am staring to wonder if that is correct.
Basically, the question is - how could I serve a "exe" file ?
Cheers !!

T41---process rundll32.exe occupied 100% cpu usage and caused slow performance.

hi i have a big problem whit the performance of my laptop. I bought a extra 4gb ram for the second slot that not exist; and still continuos getting my cpu usage at 100% whit 2 programs running like office and google crhome.
i have this specf of my latop:
- procesor: amd c-60 apu whit radeon hd graphics 1,00 ghz
- ram: 4gz
system type: 64-bit OS
winows 7 ultimate
please tell me if i have to install another OS, made changes in my configuration or just buy another laptop.
tks

Rundll32.exe Using High CPU on Windows 8.1
I use a Lenovo T440s laptop for my service calls and when I need to do work remotely. My laptop runs Windows 8.1 Professional. I love this laptop and it has proved to be tough as well as extremely fast. I noticed a couple weeks ago that my battery was going dead after about an hour of usage. I also noticed that my cooling fan in the laptop was running louder than normal. I decided to open Task Manger on my laptop to see what the issue was. I soon noticed that a process called rundll32.exe was using around 25 percent of my CPU. I killed the process and everything returned to normal.
A few days later, my battery was going dead very rapidly. My cooling fan was on almost constantly and was blowing warm air. I opened Task Manger and sure enough, rundll32.exe was using 25% of my CPU again. I killed the process and everything was fine. It wasn’t long and my laptop was doing the exact same thing as I described before. I decided it was time to get to the bottom of this issue. Here is how I troubleshot what program was using the rundll32.exe and in the process was killing my battery.
Step One: I downloaded Process Explorer. This is an excellent tool. It is similar to Task Manager but goes into way more depth on the processes and dlls that are running. I extracted the download and then ran Process Explorer as an administrator.
Step Two: One of the first things I noticed was rundll32.exe was using 23 percent of my CPU again.
I right-clicked on the rundll32.exe process and selected properties. I clicked on the Image tab and at once saw the culprit. A utility to monitor and gauge my battery usage, called PwrMgrBkGndMonitor, was draining my battery instead of saving it.
Step Three: After a little digging around in my installed programs I located a program called Lenovo Settings Dependency Package. PwrMgrBkGndMonitor was installed in the Lenovo Settings Dependency Package.
I didn’t use this program and decided I didn’t need it. I uninstalled the program and restarted my laptop. I haven’t had a problem with the rundll32.exe using up my CPU since I uninstalled Lenovo Settings Dependency Package.
If you are experiencing the same symptoms has stated above and you are running a Lenovo laptop with Windows 8.1, this may be your issue. However, before you uninstall the program I would recommend using Process Explorer. Process Explorer will help you determine the exact program that is giving you issues before blindly uninstalling and killing services. I hope my troubleshooting steps can help you find program is making rundll32.exe use high CPU usage. Let me know in the comments if this helped you!
Source: techspeeder.com

Firefox stops responding and causes Windows to stop responding also

Sorry if this is vague; I just wrote a very, very detailed post on my issues but then the site decided that I didn't have permission to post it and erased everything.
My problem is that Firefox freezes and causes Windows to freeze for a while also. after a few minutes it goes away, but today I got the following error message:
"AdapterDeviceID: 0x679a
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:29.0.1,%7Bd10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d%7D:2.6.3
AvailablePageFile: 8932384768
AvailablePhysicalMemory: 7403167744
AvailableVirtualMemory: 2997309440
BIOS_Manufacturer: American Megatrends Inc.
BlockedDllList:
BreakpadReserveAddress: 48037888
BreakpadReserveSize: 37748736
BuildID: 20140506152807
CrashTime: 1402766616
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1402339725
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x679a, AdapterSubsysID: 6616103c, AdapterDriverVersion: 14.100.0.0
D2D? D2D+ DWrite? DWrite+ D3D10 Layers? D3D10 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1402758510
SystemMemoryUsePercentage: 30
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 4294836224
URL: http://www.newegg.com/Product/Produc...D=3938566&SID=
Vendor: Mozilla
Version: 29.0.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed."
I noticed the file "mswsock.dll" mentioned so I looked for issues with it. Apparently there are issues with malware and Firefox and that file. I have scanned and it found nothing, plus this issue has existed in three formats of my drive and windows re-installs (for other reasons, I didn't format and re-install just to make sure there was no malware) so I'm pretty sure there are no problems with malware.
I am running a Minecraft server and I have a static IP set up, but I've been doing this for three years without issues so I don't think that's the issue either.
I have tried disabling all plugins. Still crashes and crashes Windows with it.
I have run Memtest86+ and the windows memory tester. Not a memory issue.
Here's my troubleshooter info: {
"application": {
"name": "Firefox",
"version": "29.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.3; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0",
"supportURL": "https://support.mozilla.org/1/firefox/29.0.1/WINNT/en-US/"
"crashes": {
"submitted": [
"id": "bp-588b7adc-28fd-43ab-bc02-91dda2140614",
"date": 1402766691156,
"pending": false
"pending": 0
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.places.smartBookmarksVersion": 6,
"browser.sessionstore.upgradeBackup.latestBuildID": "20140506152807",
"browser.startup.homepage_override.mstone": "29.0.1",
"browser.startup.homepage": "http://scratch.mit.edu/|http://lotro-wiki.com/|http://localhost:8080/",
"browser.startup.homepage_override.buildID": "20140506152807",
"browser.tabs.warnOnClose": false,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "29.0.1",
"font.internaluseonly.changed": true,
"gfx.direct3d.last_used_feature_level_idx": 0,
"network.cookie.prefsMigrated": true,
"places.database.lastMaintenance": 1402771877,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.importedState": true,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"privacy.sanitize.migrateFx3Prefs": true,
"storage.vacuum.last.places.sqlite": 1402344545,
"storage.vacuum.last.index": 1
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 10",
"windowLayerManagerRemote": false,
"adapterDescription": "AMD Radeon HD 7900 Series",
"adapterVendorID": "0x1002",
"adapterDeviceID": "0x679a",
"adapterRAM": "3072",
"adapterDrivers": "aticfx64 aticfx64 aticfx64 aticfx32 aticfx32 aticfx32 atiumd64 atidxx64 atidxx64 atiumdag atidxx32 atidxx32 atiumdva atiumd6a atitmm64",
"driverVersion": "14.100.0.0",
"driverDate": "4-17-2014",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.3.9600.17111",
"webglRenderer": "Google Inc. -- ANGLE (AMD Radeon HD 7900 Series Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.3",
"version": "4.10.3"
"NSS": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSUTIL": {
"minVersion": "3.16",
"version": "3.16"
"NSSSSL": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"NSSSMIME": {
"minVersion": "3.16 Basic ECC",
"version": "3.16 Basic ECC"
"userJS": {
"exists": false
"extensions": [
"name": "Adblock Plus",
"version": "2.6.3",
"isActive": true,
"id": "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}"
"name": "Troubleshooter",
"version": "1.1a",
"isActive": true,
"id": "[email protected]"
Like I said before, sorry if this is vague. Let me know if you need more info and hopefully I'll be less impatient with this site then.
I'm running Windows 8.1 64 bit. My full specs are here: https://pcpartpicker.com/b/FfJxFT (I've upgraded to Windows 8 and replaced the dead hard drive now. My new drives are a 120Gb Samsung 840 EVO and a 1TB Seagate Barracuda).
Thanks.

'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''''' {web link}
While you are in safe mode;
Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart

Work Order list report that will includes Damage and Cause codes

Is there a WO list report that includes fields of the Damage and Cause Codes?
Thanks.

Hi,
Generally damages and causes we update in notifications then i think there wont be a list which u r asking
For notification the t-code is iw69

CTXFISPI.EXE/DLLML.EXE - Purpose? And causes of these erro

Similar Messages

Maybe you are looking for