CU Tcodes name missing in the tree view

I have activated the Compatible Unit enhancement. However in the tcodes tree view, only tcodes are displayed. Name of the trasaction is not displayed.

Also posted [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=314463]

Similar Messages

Grouping by ID column, but showing Name column in the Tree View.

Hi, i'm using Crystal Reports for Visual Studio 2010. I'm grouping my report by TenantID column. When i generate the report, it shows the TenantID in the TreeView (on the left side). Is there a way that i can group by TenantID, but show TenantName column in the TreeView? How would i do that?
P.S. The reason i don't want to group by TenantName is because, sometimes some tenants may have the same name, and i don't want the report to combine them.
Thanks so much.
Aron

Hi Aron,
Here the solution with screenshot-wise:
Step1: Go to Group Expert
2. Click ptions -> options
3. Check Customize Group Name Field > Choose TenantName column -> ok
Regards,
DJ

The labview probe button is missing in the diagram view?

any ideas why the labview probe & is missing i the diagram view of one Vi?
Solved!
Go to Solution.
Attachments:
MissingButtons.JPG ‏17 KB

You have it switched off in the VI properities. Probably disabled debugging.

Catalog manager not showing the tree view

Hey Everyone
I cannot see the tree view when i login in the catalog manger in the online mode.What could be the reason? I can see only the \ folder but not the shared,system and users folders.I checked even the instance config file and made sure the path was right.
Thanks

what does emctl status dbconsole show?
Hi All,
I have installed 10g in Win 2000. Enterprise manager
was working fine after installation. I restarted the
Oracle Service (DB Service, TNS, iSQL, DBControl)
from services in Control Panel. Database is up and
working fine but the Enterprise Manager is not
working. When I am trying to use the EM through
Internet Explorer, it is not asking for any login and
showing as database as down. I am able to connect to
DB from client PC. Please advice.

Switching between the Classic View and the Tree View in transaction FEBA

Hi All
I would like to know how to switch between the Classic View and the Tree View on transaction FEBA for post processing of bank statements. I have a scenario where in the DEV client the transaction is calling up the Tree View and in my QA environment it calls up the Classic View, and I would like to know if there is a way to easily switch between the two views.
I'd appreciate your assistance.

Hi,
I think you can do the same using transaction codes FEBA and FEBAN.
Thanks
Aravind

Field names Missing in the (Excel) Mail attachment

Hi ,
I am trying to send my ALV Grid Output as Excel Email attachment using the below code
The problem is that the field names are missing in the receivers Mail.
i.e
*Name*   *Emp Code*   * Branch*         "this is missing
abc         123                 ukp
I searched many threads but unable to find the solution for this.
Kindly suggest me regarding this issue.
loop at p_eadd.
    if p_eadd-low <> space.
      clear reclist.
      reclist-rec_type = 'U'. "Internet-adress
      reclist-receiver = p_eadd-low.
      reclist-express = 'X'.
      append reclist.
    endif.
endloop.
* endif.
* Send the document
call function 'SO_NEW_DOCUMENT_SEND_API1'
     exporting
          document_type              = 'RAW'
          document_data              = doc_chng
*         PUT_IN_OUTBOX              = 'X'
     tables
          object_content             = objcont
          receivers                  = reclist
     exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
          others                     = 99.
ld_aplstat = '4'.
case sy-subrc.
    when 0.
      loop at reclist.
        if reclist-receiver = space.
          name = reclist-rec_id.
        else.
          name = reclist-receiver.
        endif.
        if reclist-retrn_code = 0.
          write: / name, ': succesfully sent'.
        else.
          write: / name, ': error occured'.
        endif.
      endloop.
      ld_aplstat = '0'.
    when 1.
      write: / 'Too many receivers specified !'.
    when 2.
      write: / 'No receiver got the document !'.
    when 4.
      write: / 'Missing send authority !'.
    when others.
      write: / 'Unexpected error occured !'.
endcase.
*.Tell workflow to go on
clear ls_scma_event.
ls_scma_event-wf_event = cs_wf_events-finished.
ls_scma_event-wf_witem = wf_witem.
ls_scma_event-wf_okey = wf_okey.
call function 'KPEP_MONI_CLOSE_RECORD'
    exporting
      ls_key        = gs_key
      ls_scma_event = ls_scma_event
    changing
      ld_aplstat    = ld_aplstat
    exceptions
      no_id_given   = 1
      others        = 2.
call function 'SAP_CONVERT_TO_XLS_FORMAT'
      exporting
       i_field_seperator          = ' '
       i_line_header              = 'X'
        i_filename                 = p_file
*   I_APPL_KEEP                = ' '
      tables
        i_tab_sap_data             = it_final
* CHANGING
*   I_TAB_CONVERTED_DATA       =
     exceptions
       conversion_failed          = 1
*   OTHERS                     = 2
    if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
Thanks in Advance,
Mr. Ben

Hi Ben,
Follow the code below....
Your internal table it_final will have the attachment data. After you got the attachment data do the following
gc_ret TYPE c VALUE cl_abap_char_utilities=>cr_lf.
lt_attachment        TYPE TABLE OF solisti1 ,
gt_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0 WITH HEADER LINE,
CLEAR:gs_attach.                      <this will have your attachment, declare a structure which contains fields of your excel sheet>
<before this you have to copy all the fields from your final internal table which should be attached to email to gs_attach>
For attaching field names
    CONCATENATE gc_ret gs_attach INTO gs_attach.
    gs_attach = gs_attach+1.
    APPEND gs_attach TO gt_attach.
CLEAR:lt_attachment.
      lt_attachment[] = gt_attach[].
SORT lt_attachment .
      DELETE ADJACENT DUPLICATES FROM lt_attachment COMPARING ALL FIELDS.
      CLEAR gs_attach.
      CONCATENATE <field names >
      INTO gs_attach SEPARATED BY gc_tab.
      INSERT gs_attach INTO lt_attachment INDEX 1.
<field addition ends>
call function 'SO_NEW_DOCUMENT_SEND_API1'
     exporting
          document_type              = 'RAW'
          document_data              = doc_chng
        PUT_IN_OUTBOX              = 'X'
     tables
          object_content             = objcont
          receivers                  = reclist
        contents_bin               = lt_attachment
     exceptions
          too_many_receivers         = 1
          document_not_sent          = 2
          operation_no_authorization = 4
    if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
Regards,
Aravind.

Audio tracks missing in the timeline viewer

Hello,
I am using Imovie 4.0.1 and have been working on a project for several months and now towards the homestretch, I have lost the ability to see the audio tracks that I added to the project. I am referring to the 2nd and 3rd tracks on the timeline viewer. This isn't a killer as I have completed all of my editing and am ready to export it to my camera (to then reimport, seperate audio, and then lock--to make sure audio and video matches up) The problem is that when I export to the camera, the audio comes and goes, and some of the video stutters at times. It seems that this all might be related. Has my imovie become corrupted? All of the projects that I have worked on in the past--that are still on this computer--exhibit the same thing i.e. I can't see the audio tracks and the editing arrows (and other items) have disappeared from underneath the viewing area.
I would appreciate any help.
jg

com.apple.imovie3.plist is what you should have found because you are using imovie 4.
And, a new .plist should have been made by imovie when you re-launched it-so that's OK.
Sounds like you have enough HD space...are you sure you are using the Timeline viewer and not the Clip viewer?
The Clip viewer looks like this:
And the Timeline viewer looks like this:
(But these are screen shots from imovie 5 so don't let that confuse you).
Sue

Name missing in the top companies contributor

Hi,
i got 22 points in the sdn forum and in top companies contributor when i click on my company my name is not apper in that but others name are there can any one help me to solve this problem

Hi Pugazh,
The contributors (Companies and Individuals) listed on these pages are recognized for their contributions across all SCN. It's not only about forum points, but also blogs, articles, wiki contributions, etc.
Our systems show that you have 13 points this year under the category SAP NetWeaver Platform. The last company on the list for the last 90 days has 20 points. So you do not make it to the short list (I am assuming that you are the only contributor in the company).
If you have more questions you can send an email to our support inbox: [email protected]
Best,
Laure

Can I hide certain folders from the 'tree view' under Site Manager - Pages?

In the above image, is there a way to hide the circled folders from the listing?
This will help in reducing confusion and possible breakages.

Hi AirborneAgency,
unfortunately there is not, educate the admins of this site not to touch these folders instead. That's what I do with my clients and it works just fine.
Nicole - BCGurus.com | http://bcgurus.com/Business-Catalyst-Templates for only $7

How can I restore to the Browser View of Book, several missing photo's?

Ten photos are missing from the Browser View of the Book. The photos show up in the Photo View and are checked as being used. They also show up in the working screen view of the book. All other photos in the book show up. Why are the 10 missing? How can I restore just those photos and not all photos for that book? What difference would it make in sending that book to the printer?

Ten photos are missing from the Browser View of the Book. The photos show up in the Photo View and are checked as being used. They also show up in the working screen view of the book.
I'm not sure of your question
Are you saying that when you view the thumbnails of the book at the top or the screen that some pages do not show the photos even though they are in the book below?
If so that is a minor bug in iPhoto '09 - you can ignore it - it is just a display issue -- I forget exactly how but you can force a refresh of the book thumbnails - maybe double clicking on the book page - or maybe on the thumbnail
But in any case your book is fine (you should preview it before sending - http://support.apple.com/kb/HT1040 )
LN

A tree-view in HTML page with nodes generated with java script in run time is not visible in the UI Automation Tree. Need Help

I have a HTML page with an IFrame. Inside the Iframe there is a table with a tree view
<iframe>
<table>
<tr>
<td>
<treeview id="tv1"></treeview>
</td>
</tr>
</table>
</iframe>
In UIA, i am able to traverse till the tree view but not able to see it.
I have used the TreeWalker.RawViewWalker Field to traverse the node from the desktop Automation.RootElement.
I tried to use AutomationElement.FromPoint method to check whether i am able to get that element. Fortunately i was able to get the automation element.
i tried to get the path to root element from the node element using the TreeWalker.RawViewWalker. I was able to get the parent path to the root element.
But trying the reverse way like navigating from root element to tree node, was not getting the element for me.
Please help me with suggestions or inputs to resolve this issue.

Thanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau

How can i make the navigation easier in my content area? (TREE VIEW)

Now I use 1 navbar for my whole content area.
This is what I want :
I would like to navigatie in my content area lik I navigate in the explorer of microsoft.
Is there a script,
portlet, or something like that.
when I delete a folder it must automaticle disapear from the tree view.
When I add it must be displayed.
When the folder isn't public it, the public can't see it
thxc in advance
Bert Leeman

If you are using the same nav bar you could build a custom nav bar in the shared objects and publish it as a portlet. In the properties of a folder you can assign an image for the nav bar. This could make it look like a tree assuming you build the images that way. Also your folder links should disappear from the nav bar when they are deleted. I think.

How to populate list in tree view dynamically

Hi,
I am new to Indesign Plugin creation.
I want to create list in tree view dynamically.
I tried wlistboxcomposite sdk sample in indesign cs4.
I have some doubts in this.
1. Can i write my own method in WLBCmpTreeViewAdapter class because it's implements ListTreeViewAdapter
If it's possible how can i call this method.
2. In this example they populating static string in constructor like this
WLBCmpTreeViewAdapter::WLBCmpTreeViewAdapter(IPMUnknown* boss):ListTreeViewAdapter(boss){
K2Vector<PMString> lists;
for (int32 i = 0; i< 12; i++){PMString name(kWLBCmpItemBaseKey);name.AppendNumber(i+1);name.Translate();lists.push_back(name);}
InterfacePtr<IStringListData> iListData(this, IID_ISTRINGLISTDATA);}
and this list is populating on loading time but my requirement is i have one button "get list" after clicking this button i have to populate the list, how can
i achieve this.
Pls do needful.
Thanks
Arun

The TreeViewAdaptor is responsible for mapping your custom data to the tree view itself. I almost always start by making it return some fixed number of objects with names "item 1" etc. That way you get the tree view working first.
Then, after you get it laid out and displaying properly, you can worry about using real data. At that point, you have your adaptor return the actual number of items in your list and each individual item. Then you can populate your list when you push your button and then invalidate the IControlView of the tree view widget to cause it to redraw. At that point your adaptor will get called and your data should appear.
Jon
"Expert for hire"

Console's left pane (tree view) is empty!!! Anyone has same experience???

HI,
My weblogic console view's left pane (used to show the tree view)
is empty. It only shows an icon (indicating something is missing).
Does anyone has similar experience before and know the solution
to fix this?
Thank you,
Terrence

The console's left pane is an applet. Make sure the java
plugin is properly installed on your desktop.
Kumar
Terrence Leung wrote:
HI,
My weblogic console view's left pane (used to show the tree view)
is empty. It only shows an icon (indicating something is missing).
Does anyone has similar experience before and know the solution
to fix this?
Thank you,
Terrence

OER - Asset Editor Tree View unfiled items

I am using OER 11.1.1.5.0 and in the Asset Editor Tree View I can see general categories of 'Unsubmitted', Submitted' and 'Registered' with various sub-categoreis under each main category. I am puzzled why an Asset which appears in the Tree View initially as as Submitted / Pending Review / DAC Interface / CB Interface should, once all the submission, acceptance and registration stages have been completed, appear under Registered / Unfiled / CB Interface whilst another Asset should appear initially as Submitted / Pending Review / DAC Product / DAC Product - Portal appears, having undergone the same registration processes, as Registered / DAC Product / DAC Product - Portal.
I cannot find any information in the documentation regarding 'Unfiled' assets nor can I see any difference between the Asset Types for these two assets which might cause this to happen.
Can anybody shed any light on this issue ?
Thanks
Chris

It works for me after I did a small tweak by as mine is a demo install.
Idea - is to make an security exception for the OER url in Java control console
Steps to do that :
1.Go to the control panel and uninstall the 64 bit version of Java
Open Programs and Features and select the 64 bit version of Java and select Uninstall.
2.Open up the Java Control Panel
Found as an option in the standard windows control panel
3.Check the version by clicking on the About Tab
If this is not what you expected you can go to java.com and download the latest version.
4.Click on the Security Tab in the Java Control Panel
5.Click on the Edit Site List button in the lower RH corner of the control panel
6.Add your URL to be allowed
Enter the full path that you use to access this such as https://myequallogics.com or the IP address if that is how you access it (as in http://192.168.0.100 - Https is recommended by Oracle.) Once complete hit OK. You should now see the exception on the security page.
7.Close out of the control panel.
8.You can now acess your site through the browser window.
Thanks to Java error: Missing required Permissions manifest attribute in main jar - Spiceworks for letting me know this.
regards,
Sridhar

CU Tcodes name missing in the tree view

Similar Messages

Maybe you are looking for