CUCM IM and P Design - DNS SRV -

Hey guys.
I would like to design a CUCM IM and P infrastructure for my customer. High availability is mandatory for my customer and here is what I found from the documentation:
Configure SIP Trunk for IM and Presence Service
If high availability is configured for the IM and Presence cluster, multiple entries should be entered in the Dotted IP Address or FQDN to identify the various nodes in the cluster. DNS SRV cannot be used for an IM and Presence cluster if high availability is configured.
So SRV record can't be used for an IM and P cluster.
Now if I want to configure a presence gateway on the CUCM IM and P, the configuration guide says that we must configure a CUCM as a presence gateway to enable SIP connection:
The problem is that I cannot configure 2 or more CUCM Presence gateways ... and for that I have to use a DNS SRV.
But I can't use an DNS SRV because I am using high availability ... This is a chicken and egg problem to me :)
Does someone has a recommendation please ? 
Thanks guys :)

Actually, the config guide allows DNS SRV on the Presence Gateway config of the IM&P servers:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_0111.html#d54883e741a1635
It appears they are only disallowing SRV in the CCM to IM&P SIP Proxy, not the other way around.

Similar Messages

  • SPA 5xx and 9xx phones registering to all proxies with DNS SRV records

    A weird situation -- I use DNS SRV records to prioritize the two Asterisk servers to register to (east coast vs west coast).  However it seems that phones are often registering to BOTH servers and show as live on both at the same time.  There seems to be little rhyme or reason as to when it occurs, but it's weird.  Fortunately the phone does seem to be preferring the higher priority SRV record but I can't figure out why it is registering to both.
    This happens with SPA-942s (6.1.5a) and SPA504Gs (7.4.9c). 
    Any ideas what makes this happen?  On the surface it seems like a good thing, but functionally the phones are registering the same port numbers and only the priority server can get through firewalls with traffic for the phones.  This screws up my "presence" indicators within the system.
    DNS SRV RECORDS:
    _sip._udp.west.server.net  (for west coast customers)
    Priority 10:  west coast machine
    Priority 20:  east coast machine
    _sip._udp.east.server.net (for east coast customers)
    Priority 10:  east coast machine
    Priority 20:  west coast machine

    We determined this was not actually happening.  There was a syncing taking place in the background that was giving the impression this was happening but it really was not.

  • DNS SRV Resolition

    In looking to fix a problem that many are having with getting their Jabber servers working with google, I believe I have found that resolver seems to ignore the existence of SRV records and simply return A records. Has anyone else seen this problem.

    In CUCM documentation I see the next:
    Enter the address of the IM and Presence service in one of the following forms:
    Hostname
    IP address
    DNS SRV
    Allowed values: Allowed characters include alphanumeric (a-zA-Z0-9), period (.), backslash (\), dash (-), and underscore (_)
    So the question is - what the format of dns rsv record in uc profile ?

  • UCCE for CCM failover with DNS SRV.

    we are testing UCCE for CCM failover with Local DNS SRV. We have enabled the "Use DNS SRV type query:YES"&"Resolve SRV records locally:1" on CVP Call server configuration SIP tab.
    The srv.xml file updated with CCM  IP addrs in this path \Cisco\CVP\conf\srv.xml
    On testing, the agent state moved to reserved state, but call is not delivered. Static Route is added for Phone Extension as "500>,proxy.ipcc.com".
    What will be the issue? Kindly let me know what needs to be done.
    Thanks & Regards
    JP.

    So, as Markus already figured out, you need to make sure that your CUCM actually understands that it is the intended recipient for these SIP INVITEs. I.e. if you define the static route to point to cucm.cisco.com you have to specificy the specify the Custer FQDN to be cucm.cisco.com under the 'Cluster Wide Domain Settings' in the CUCM Enterprise Parameters.
    A second thing to watch out for the CUCM Group assigned to your SIP Trunks. Each SIP Trunk, like any CUCM device, has a Device Pool, the device pool has a UCM Group defining on which UCM nodes that device 'exists'. For phones that typically means : which UCM nodes can I register to ?
    But for SIP trunks this means : which UCM nodes have a SIP deamon process for this Trunk and so which of the UCM nodes will actually accept INVITEs for this trunk. The most common cause for 503 Service Unavailable is probably this, (not all) the CUCM nodes in your DNS / srv.xml round robin are in the UCM Group assigned to the Device Pool configured on the SIP trunk for this Call Server.
    Cheers,
    Kris

  • Use of BAT file - How do you completely delete 150 phones and their associate DNs?

    How do you completely delete 150 phones and their associate DNs? All the phones are in the same device pool. I prefer BAT way.
    Version of the CUCM: 8.6.2
    Type of phones: 7962 phones - associated with the same device pool.
    Additinal questions: Is there a way to delete elegantly all the phones and their associated DNs when all the phones are associated to the same device pool? I rather not work with specific extensions and MAC addresses.
    Thank you,
    Calin Lupas

    Hi Calin,
    Using BAT this will require 2 - passes. 1 for the phones and 1 for "unassigned DN's". this is nicely shown in the attached doc;
    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/bat/8_0_1/bat-801-cm/t03delph.html#wp1342774
    Of course for the DN's you could delete them via the Route Plan report>Unassigned DN>select all>Delete
    Cheers!
    Rob

  • ISSUE: "This domain controller must register a DNS SRV resource record, which is required for replication to function correctly"

    so we currently have three domain controllers set up, two of them on 2012r2 and one of them on 2008r2. prior to any of these domain controllers being added to the domain there was only one, running on 2003r2. the 2003r2 server was up and running when the
    first 2012r2 was added and that's when running 'dcdiag /e /c /v' would yield an issue with "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local" in the DNS portion of the diagnostics, specifically:
    TEST: Records registration (RReg)
    Network Adapter [00000010] Microsoft Hyper-V Network Adapter:
    Error:
    Missing SRV record at DNS server 192.168.22.4:
    _ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local
    after adding the second 2012r2 to the domain, this issue is still there... adding the 2008r2 server to the domain and running BPA it gives the following:
    Title:
    This domain controller must register a DNS SRV resource record, which is required for replication to function correctly
    Severity:
    Error
    Date:
    7/3/2014 11:24:48 AM
    Category:
    Configuration
    Issue:
    The "DcByGuid" DNS service (SRV) resource record that advertises this server as an available domain controller in the domain and ensures correct replication is not registered. All domain controllers (but not RODCs) in the domain must register this record.
    Impact:
    Other member computers and domain controllers in the domain or forest will not be able to locate this domain controller. This domain controller will not be able to provide a full suite of services.
    Resolution:
    Ensure that "DcByGuid" is not configured in the "DnsAvoidRegisteredRecords" list, either through Group Policy or through the registry. Restart the Netlogon service. Verify that the DNS service (SRV) resource record "_ldap._tcp.9a5f3c17-e7ac-48f7-ab42-bf1ea621a6f5.domains._msdcs.cmedia.local", pointing to the local domain controller "CM-DC4-NY01.cmedia.local", is registered in DNS.
    More information about this best practice and detailed resolution procedures: http://go.microsoft.com/fwlink/?LinkId=126968
    I've tried scanning and then re-scanning every single entry in DNS Manager and do not see any reference to this specific GUID mentioned, nor do I see any other domain controllers referenced that should not be in there. The two 2012r2 and the 2008r2 domain
    controllers are the only ones listed in DNS Manager... the 2003r2 mentioned earlier failed and was removed.

    Just to chime in, I noticed that you said you have one 2008 R2 DC, and two 2012 DCs.
    I also noticed in the ipconfig /all that all DCs are pointint to themselves for DNS. We usually like to see them point to a partner, then itslelf as the second entry, w hether loopback or by its own IP.
    Based on that, what I suggest to level the playing field by choosing the WIndows 2008 R2 DC as the first DNS on all DCs and only administer DNS using that DC. The reason I chose that is because of the least common denominator is what we rather use so we
    don't invoke any new features in the newer 2012 DNS console that 2008 R2 may not understand.  After that's done, on each DC run (and you can use a PowerShell window to run this):
    Rename the system32\config\netlogon.dns and netlogon.dnb files by suffixing ".old" to the file.
    ipconfig /registerdns
    net stop netlogon
    net start netlogon
    Then re-run the dcdiag /e /c /v.
    Post your results, please.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.
    I thought the DNS entries were supposed to be the other way around? point to themselves first and a partner as secondary? regardless, as requested, I've changed it to what you've prescribed where they point to the 2008r2 server as the primary with themselves
    as the secondary. I've also followed the steps to what seems like refreshing the DNS? on each of the DCs. Here's the output from dcdiag /e /c /v
    Directory Server Diagnosis
    Performing initial setup:
    Trying to find home server...
    * Verifying that the local machine CM-DC1-NY01, is a Directory Server.
    Home Server = CM-DC1-NY01
    * Connecting to directory service on server CM-DC1-NY01.
    * Identified AD Forest.
    Collecting AD specific global data
    * Collecting site info.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory
    =ntDSSiteSettings),.......
    The previous call succeeded
    Iterating through the sites
    Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia
    ,DC=local
    Getting ISTG and options for the site
    * Identifying all servers.
    Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=cmedia,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=nt
    DSDsa),.......
    The previous call succeeded....
    The previous call succeeded
    Iterating through the list of servers
    Getting information for the server CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    Getting information for the server CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites
    ,CN=Configuration,DC=cmedia,DC=local
    objectGuid obtained
    InvocationID obtained
    dnsHostname obtained
    site info obtained
    All the info for the server collected
    * Identifying all NC cross-refs.
    * Found 3 DC(s). Testing 3 of them.
    Done gathering initial info.
    Doing initial required tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC1-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC3-NY01 passed test Connectivity
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Connectivity
    * Active Directory LDAP Services Check
    Determining IP4 connectivity
    * Active Directory RPC Services Check
    ......................... CM-DC4-NY01 passed test Connectivity
    Doing primary tests
    Testing server: Default-First-Site-Name\CM-DC1-NY01
    Starting test: Advertising
    The DC CM-DC1-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC1-NY01 is advertising as an LDAP server
    The DC CM-DC1-NY01 is advertising as having a writeable directory
    The DC CM-DC1-NY01 is advertising as a Key Distribution Center
    The DC CM-DC1-NY01 is advertising as a time server
    The DS CM-DC1-NY01 is advertising as a GC.
    ......................... CM-DC1-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    [CM-DC1-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC1-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC1-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC1-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC1-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC1-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC1-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC1-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local
    * SPN found :LDAP/CM-DC1-NY01
    * SPN found :LDAP/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :LDAP/a29d12f1-2869-44bf-8e43-adf7ddf33865._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/a29d12f1-2869-44bf-8e43-adf7ddf33865/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC1-NY01.cmedia.local
    * SPN found :HOST/CM-DC1-NY01
    * SPN found :HOST/CM-DC1-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC1-NY01.cmedia.local/cmedia.local
    ......................... CM-DC1-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC1-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC1-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC1-NY01\netlogon
    Verified share \\CM-DC1-NY01\sysvol
    ......................... CM-DC1-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC1-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC1-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC1-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC1-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 4609 to 5108
    * rIDPreviousAllocationPool is 4609 to 5108
    * rIDNextRID: 4629
    ......................... CM-DC1-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC1-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    A warning event occurred. EventID: 0x0000002F
    Time Generated: 07/08/2014 13:19:14
    Event String:
    Time Provider NtpClient: No valid response has been received from manually configured peer 0.ca.pool.ntp.org
    after 8 attempts to contact it. This peer will be discarded as a time source and NtpClient will attempt to discover a n
    ew peer with this DNS name. The error was: The peer is unreachable.
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC1-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC1-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC1-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC1-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC1-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC1-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC1-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC3-NY01
    Starting test: Advertising
    The DC CM-DC3-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC3-NY01 is advertising as an LDAP server
    The DC CM-DC3-NY01 is advertising as having a writeable directory
    The DC CM-DC3-NY01 is advertising as a Key Distribution Center
    The DC CM-DC3-NY01 is advertising as a time server
    The DS CM-DC3-NY01 is advertising as a GC.
    ......................... CM-DC3-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC3-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC3-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC3-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC3-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC3-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC3-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC3-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC3-NY01 on DC CM-DC3-NY01.
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local
    * SPN found :LDAP/CM-DC3-NY01
    * SPN found :LDAP/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :LDAP/5e9d1971-39ca-484c-922d-411c2364c96e._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/5e9d1971-39ca-484c-922d-411c2364c96e/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC3-NY01.cmedia.local
    * SPN found :HOST/CM-DC3-NY01
    * SPN found :HOST/CM-DC3-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC3-NY01.cmedia.local/cmedia.local
    ......................... CM-DC3-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC3-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC3-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC3-NY01\netlogon
    Verified share \\CM-DC3-NY01\sysvol
    ......................... CM-DC3-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC3-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC3-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC3-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC3-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15109 to 15608
    * rIDPreviousAllocationPool is 15109 to 15608
    * rIDNextRID: 15110
    ......................... CM-DC3-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC3-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC3-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC3-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC3-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC3-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC3-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC3-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC3-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC3-NY01 passed test VerifyReplicas
    Testing server: Default-First-Site-Name\CM-DC4-NY01
    Starting test: Advertising
    The DC CM-DC4-NY01 is advertising itself as a DC and having a DS.
    The DC CM-DC4-NY01 is advertising as an LDAP server
    The DC CM-DC4-NY01 is advertising as having a writeable directory
    The DC CM-DC4-NY01 is advertising as a Key Distribution Center
    The DC CM-DC4-NY01 is advertising as a time server
    The DS CM-DC4-NY01 is advertising as a GC.
    ......................... CM-DC4-NY01 passed test Advertising
    Starting test: CheckSecurityError
    * Dr Auth: Beginning security errors check!
    Found KDC CM-DC1-NY01 for domain cmedia.local in site Default-First-Site-Name
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC1-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 2 servers
    Object is up-to-date on all servers.
    [CM-DC4-NY01] No security related replication errors were found on this DC! To target the connection to a
    specific source DC use /ReplSource:<DC>.
    ......................... CM-DC4-NY01 passed test CheckSecurityError
    Starting test: CutoffServers
    * Configuration Topology Aliveness Check
    * Analyzing the alive system replication topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the alive system replication topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test CutoffServers
    Starting test: FrsEvent
    * The File Replication Service Event log test
    ......................... CM-DC4-NY01 passed test FrsEvent
    Starting test: DFSREvent
    The DFS Replication Event Log.
    Skip the test because the server is running FRS.
    ......................... CM-DC4-NY01 passed test DFSREvent
    Starting test: SysVolCheck
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test SysVolCheck
    Starting test: FrsSysVol
    * The File Replication Service SYSVOL ready test
    File Replication Service's SYSVOL is ready
    ......................... CM-DC4-NY01 passed test FrsSysVol
    Starting test: KccEvent
    * The KCC Event log test
    Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
    ......................... CM-DC4-NY01 passed test KccEvent
    Starting test: KnowsOfRoleHolders
    Role Schema Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role Domain Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Confi
    guration,DC=cmedia,DC=local
    Role PDC Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Rid Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configur
    ation,DC=cmedia,DC=local
    Role Infrastructure Update Owner = CN=NTDS Settings,CN=CM-DC1-NY01,CN=Servers,CN=Default-First-Site-Name,CN
    =Sites,CN=Configuration,DC=cmedia,DC=local
    ......................... CM-DC4-NY01 passed test KnowsOfRoleHolders
    Starting test: MachineAccount
    Checking machine account for DC CM-DC4-NY01 on DC CM-DC4-NY01.
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local
    * SPN found :LDAP/CM-DC4-NY01
    * SPN found :LDAP/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :LDAP/37830012-1f10-43c9-a0ff-2a0e8a912187._msdcs.cmedia.local
    * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/37830012-1f10-43c9-a0ff-2a0e8a912187/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia.local
    * SPN found :HOST/CM-DC4-NY01.cmedia.local
    * SPN found :HOST/CM-DC4-NY01
    * SPN found :HOST/CM-DC4-NY01.cmedia.local/cmedia
    * SPN found :GC/CM-DC4-NY01.cmedia.local/cmedia.local
    ......................... CM-DC4-NY01 passed test MachineAccount
    Starting test: NCSecDesc
    * Security Permissions check for all NC's on DC CM-DC4-NY01.
    The forest is not ready for RODC. Will skip checking ERODC ACEs.
    * Security Permissions Check for
    DC=ForestDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    DC=DomainDnsZones,DC=cmedia,DC=local
    (NDNC,Version 3)
    * Security Permissions Check for
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    (Schema,Version 3)
    * Security Permissions Check for
    CN=Configuration,DC=cmedia,DC=local
    (Configuration,Version 3)
    * Security Permissions Check for
    DC=cmedia,DC=local
    (Domain,Version 3)
    ......................... CM-DC4-NY01 passed test NCSecDesc
    Starting test: NetLogons
    * Network Logons Privileges Check
    Verified share \\CM-DC4-NY01\netlogon
    Verified share \\CM-DC4-NY01\sysvol
    ......................... CM-DC4-NY01 passed test NetLogons
    Starting test: ObjectsReplicated
    CM-DC4-NY01 is in domain DC=cmedia,DC=local
    Checking for CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local in domain DC=cmedia,DC=local o
    n 3 servers
    Object is up-to-date on all servers.
    Checking for CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuratio
    n,DC=cmedia,DC=local in domain CN=Configuration,DC=cmedia,DC=local on 3 servers
    Object is up-to-date on all servers.
    ......................... CM-DC4-NY01 passed test ObjectsReplicated
    Starting test: OutboundSecureChannels
    * The Outbound Secure Channels test
    ** Did not run Outbound Secure Channels test because /testdomain: was not entered
    ......................... CM-DC4-NY01 passed test OutboundSecureChannels
    Starting test: Replications
    * Replications Check
    * Replication Latency Check
    DC=ForestDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=DomainDnsZones,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Schema,CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    CN=Configuration,DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    DC=cmedia,DC=local
    Latency information for 4 entries in the vector were ignored.
    4 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's
    no longer replicating this nc. 0 had no latency information (Win2K DC).
    ......................... CM-DC4-NY01 passed test Replications
    Starting test: RidManager
    * Available RID Pool for the Domain is 16109 to 1073741823
    * CM-DC1-NY01.cmedia.local is the RID Master
    * DsBind with RID Master was successful
    * rIDAllocationPool is 15609 to 16108
    * rIDPreviousAllocationPool is 15609 to 16108
    * rIDNextRID: 15609
    ......................... CM-DC4-NY01 passed test RidManager
    Starting test: Services
    * Checking Service: EventSystem
    * Checking Service: RpcSs
    * Checking Service: NTDS
    * Checking Service: DnsCache
    * Checking Service: NtFrs
    * Checking Service: IsmServ
    * Checking Service: kdc
    * Checking Service: SamSs
    * Checking Service: LanmanServer
    * Checking Service: LanmanWorkstation
    * Checking Service: w32time
    * Checking Service: NETLOGON
    ......................... CM-DC4-NY01 passed test Services
    Starting test: SystemLog
    * The System Event log test
    Found no errors in "System" Event log in the last 60 minutes.
    ......................... CM-DC4-NY01 passed test SystemLog
    Starting test: Topology
    * Configuration Topology Integrity Check
    * Analyzing the connection topology for DC=ForestDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=DomainDnsZones,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Schema,CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for CN=Configuration,DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    * Analyzing the connection topology for DC=cmedia,DC=local.
    * Performing upstream (of target) analysis.
    * Performing downstream (of target) analysis.
    ......................... CM-DC4-NY01 passed test Topology
    Starting test: VerifyEnterpriseReferences
    ......................... CM-DC4-NY01 passed test VerifyEnterpriseReferences
    Starting test: VerifyReferences
    The system object reference (serverReference) CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local
    and backlink on
    CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=cmedia,DC=local are
    correct.
    The system object reference (serverReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on
    CN=NTDS Settings,CN=CM-DC4-NY01,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=chiefmed
    ia,DC=local
    are correct.
    The system object reference (frsComputerReferenceBL)
    CN=CM-DC4-NY01,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=cmedia,D
    C=local
    and backlink on CN=CM-DC4-NY01,OU=Domain Controllers,DC=cmedia,DC=local are correct.
    ......................... CM-DC4-NY01 passed test VerifyReferences
    Starting test: VerifyReplicas
    ......................... CM-DC4-NY01 passed test VerifyReplicas

  • Windows 2008 R2 SP1 Exchange DAG event 1196 and 1579 Bad DNS Key

    Hi,
    I'm running an Exchange 2010 SP1 DAG on Windows 2008 R2 SP1.  We are using an INFOBLOX appliance for DNS resolution.
    DNS resolution is working and SRV records are created.
    On one of the two clusternodes I get warning 1579 and error 1196 every 15 minutes.  After looking around on the internet and technet, I found kb 977158 stating the problem and resolution.  However this hotfix is not applicabel on Windows
    2008 R2 SP1 .
    How can I resolve these annoying events?
    Event 1196 failoverClustering:
    Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason:
    DNS bad key.
    Ensure that the network adapters associated with dependent IP address resources are configured with at least one accessible DNS server.
    Event 1579 Failover Clustering
    Cluster network name resource 'Cluster Name' failed to update the DNS record for name 'DAG.domain.local' over adapter 'NIC1-LAN'. The error code was 'DNS bad key. (9017)'. Ensure that a DNS server is accessible from this cluster node and contact your DNS
    server administrator to verify the cluster identity can update the DNS record 'DAG.domain.local'.
     Frederik

    Cause:
    The cluster name resource which has been added to the DNS prior to setup active passive cluster ( or any type) need to be updated by the Physical nodes on behalf of the resource record itself. When the active node owns the resources it want to update the
    A record in the DNS database and DNS record which was created won’t allow any authenticated user to update the DNS record with the same owner
    Solution:
    Delete the existing A record for the cluster name and re-create it and make sure select the box says “Allow any authenticated user to update DNS record with the same owner name “Don’t worry about breaking anything , this has “ZERO”
    impact to cluster simply delete the A record and re-create as it is suggested here.
    http://amradmin.wordpress.com/2011/01/27/event-id-1196-1119-dns-operation-refused-cluster-servers/
    Thanks,
    Amr Tantawi |MCITP |EMA

  • Different SBA DNS SRV entry for the same dns zone?

    Hello,
    I got here a testlab with one enterprise pool and one sba deployed. The Branch Site got also an DNS Server installed. Both are using the same dns zone "test.com".
    Of course now i got different server for the same SRV Record _sipinternaltls._tcp.test.com - one for autodiscovery in the enterprise pool and one for the sba. Also I want to add the second one as failover srv + the DNS Server in the Enterprise Pool should
    be used as a Forwarder.
    Now I got some issues how to deploy several entries on two different dns server for the same zone.
    1.) If I add manually the same zone + DNS SRV entries on the SBA the dns is somehow not resolving/forwarding the entries on the other dns server in ee to other servers which are not on my SBA dns.
    2.) If I only pinpoint the SRV entries for _sipinternaltls._tcp.test.com (one for sba and failover for ee site) the dns won't resolve the second a record to the enterprise pool.
    What is the Best Practise for DNS SBA? Always point to the enterprise pool and, therefore, no other configuration is needed?
    Regards DrWho

    I played a little bit around. Problem was that I can not add the pinpoint dns srv entries via gui. Aditionally the tutorials did not work as my DNS server for SBA is not on a domain controller. In the end I did this:
    sbafe -> fqdn of my sba
    eefe -> fqdn of my frontend of enterprise pool
    dnscmd . /zoneadd _sipinternaltls._tcp.test.com. /primary /file _sipinternaltls._tcp.test.com.dns
    dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 0 0 5061 sbafe.test.com.
    dnscmd . /recordadd _sipinternaltls._tcp.test.com. @ SRV 10 0 5061 eefe.test.com.
    dnscmd . /zoneadd sbafe.test.com. /primary /file sbafe.test.com.dns
    dnscmd . /recordadd sip.sbafe.test.com. @ A 192.168.10.220
    dnscmd . /zoneadd eefe.test.com. /primary /file eefe.test.com.dns
    dnscmd . /recordadd sip.eefe.test.com. @ A 192.168.0.40
    Question is if that is a good best proctise or should the dns server within a zone contain the same records (Primary/Backup). The Client will then always hit the FE of the EE Pool first.
    Also its quite a lot of work to setup.

  • Finding proxy through DNS SRV

    Can Cisco SPA phones use DNS SRV record to find and select outbound proxy even if there are 3 or 4 answered from the DNS query?
    Is there a way to over-ride the cost and weight with custom selection method?

    If implemented according RFC2782 the device should contact proxy1.doman.com, then proxy2.doman.com then either proxy3.doman.com or proxy4.doman.com with probability 50:50.
    So what's your question ? Are you asking if particular device's resolver follow the RFC2782 correctly ? You didn't specified device nor exact firmware version so it's not possible to answer.  And implementation may vary between product's model and firmware version.
    Just try it on your particular hardware and firmware - it's simple test. It should work if implemented correctly ...
    Sorry if it's not the answer you wished for ...

  • Web design reporter and Report designer is not working in SAP BI

    Hello,
    I am facing JAVA RFC error in Web reporting designing and reporting designer tools in BEx application. For more details please check the attachment in mail  Any one help me for this issue.
    Please check the my system details in the following
    SAP ECC 6.0 EHP 6 with ABAP stack
    SAP BI 740 with ABAP stack
    BO 4.1
    Thanks & regards,
    Surendra

    Hi,
    Check with basis team , either they have configured rfc connection properly or not.
    Refer below also:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a?QuickLink=index&…
    Thanks.

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • TS3899 When sending email from the Mail App or through other Apps, my default From: address will change when I enter a To: address.  This sometimes leads me to send the email from the wrong outgoing email account.  It is frustrating and poor design.

    When sending email from the Mail App or through other Apps on my iPad, my default From: address will change when I enter a To: address.  This sometimes leads me to send the email from the wrong outgoing email account.  It is frustrating and poor design, especially since I had already checked the From: address.
    iPad 4 running iOS 8.1.3

    3rd party email addresses have to be deleted on every synmced mac product, although I have 1and1.co.uk and my imac updatetes the mails in that account from mac mail.
    Yahoo etc is a 2 step deleting process but good to get your emails pushed when on the go.
    LJ
    http://www.facebook.com/The.Cowboy.Party

  • Can you help me with Page Layout and/or Design ideas for a software manual?

    Greetings,
    I am a new InDesign user, and am converting a software manual that I created in MS Word into InDesign. It will be converted to a pdf to view online. I have the basics (3 master pages, page numbers, running headers, 2column pages with text boxes on the left and screenshots on the right), but I want to make it look prettier. Could you please give me some ideas on page layout and/or design to make it look better or more creative?
    A few things that I am considering: borders around screenshots, a watermark, a logo next to the page numbers, different size/type of fonts, etc.
    I am open to any suggestions to make this look better. However, please understand that I am new to InDesign. With that being said, please tell me a few steps when you mention your tips. Thank you!

    Take a look at a few websites on Cannons of Page Construction.
    I think the best idea for you is to look at a few software manuals and take tips from how they accomplished the layouts.
    I'm not saying to copy them - but rather see what works and doesn't work, what worked for them might not necessarily work for you - research some layouts.
    Fonts/type/sizes etc. are pretty much ambigious without context - is this a software manual for kids (soft cuddly big fonts easy to read), technical (small, tight spacing etc), Adult friendly (smooth, crisp clear, well spaced), elderly (large elegant fonts).
    It all really depends on your demographic audience.
    Being new to InDesign I suggest you take up Sandy Cohens Quickstart Visual Guide.
    I think you should look at Michael Murphys Book on Styles
    And you should definitely get your printer (the guys bulk printing) the booklet for you on board from the start to work out optimal sizes to suit their printing presses and workflow etc. And to ensure that you are setup correctly in page sizes, margins, safe type areas, colour profiles and a few other things that your printers prepress can help you with.

  • I am having trouble using reverb of any kind; it does not sound natural, but rather "pixilated." Does anyone have any ideas for a solution? I have used Silververb and Space Designer and am having the same problem...

    I am using Logic Pro 9 with two MXL 990 microphones in my piano and a Rode NT1A for vocals. I have tried recording with added reverb and keeping getting not a natural reverb sound, but a rather "pixilated" one that does not sound natural. Does anyone have any ideas on how to solve this issue? I have tried using Silververb and Space Designer, and both result in the same problems. Thank you!

    This is asking for the impossible! It does not sound natural because maybe it isn't and in judging so whats your reference anyway. If you are in dire need of some natural sounding room you can go and record it yourself. But even then, the chances that it sounds like you imagined it, are very slim.
    There are very decent sounding reverberation plugins, based on artificial reverb generators or convolution-style, the last one is said to sound more 'natural' then the first one. Be it as it maybe, it really is like cooking food. You got all the ingredients for this delicious taste at hand and believe it or not to reach a satisfying result this is not enough, because if you do not mix the ingredients in the right proportion you will end up with a different dish you thought you'll get. This is exactly the same when one would mix audio, I dare say.
    So treat yourself to some good ingredients and the rest is up to you, namely: taste and experience!
    And looking at some of my past music productions I always find the same plugins for the 'ambient' task:
    Altiverb by Audio Ease when I have acoustic ensembles (classical music mostly), the Sony Oxford Reverb in studio productions, Bricasti when I have to deal with drums and MMultiBandReverb from MeldaProduction for all-round stuff. Thats the base I start from, after that I can end up with dozen Reverb plugins which basically all are doing the same thing but just in a tiny different way.

  • Bridge crashes on start up, is there a way to do a clean install or properly troubleshoot? (Literally just uninstalled and cleaned computer of Adobe products and reinstalled Design and Web Premium and bridge still crashes..)

    Bridge crashes on start up, is there a way to do a clean install or properly troubleshoot? (Literally just uninstalled and cleaned computer of Adobe products and reinstalled Design and Web Premium and bridge still crashes..)
    Here is the crash report:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: Bridge.exe
      Application Version: 5.0.0.399
      Application Timestamp: 4f5ec62d
      Fault Module Name: Bridge.exe
      Fault Module Version: 5.0.0.399
      Fault Module Timestamp: 4f5ec62d
      Exception Code: c0000005
      Exception Offset: 003209fa
      OS Version: 6.1.7601.2.1.0.256.4
      Locale ID: 1033
      Additional Information 1: 0a9e
      Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
      Additional Information 3: 0a9e
      Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
      http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
      C:\Windows\system32\en-US\erofflps.txt

    Have you tried to reset preferences?  And no you do not have to start Bridge to do this.,
    Hold down the Ctrl key and start Bridge.  You should get a reset window with 3 options.  Choose all 3.

Maybe you are looking for