CUCM version 9.0 SNMP MIB2 System Group Configuration

Hi,
I notice that on CUCM and CUC 9, the MIB2 System Group Configuration Information does not allow spaces on the System Location "South East Asia"...
On CUCM and CUC 7, I do not have this problem see attached screenshot "CUCM 7". Is there a way I can enter this Location on the backend using CLI?
See attached error message on CUCM 9 "capture".
Thanks

You can accomplish this by using the proper escape sequence. If you insert & nbsp ; in place of each space characters you will be allowed to save those fields.
Please note that I had to inserts spaces between the & and the nbsp and the ; due to the way the message board renders HTML content. In real world use it should look like the attached screen shot.
Once you save your changes you will notice that the text boxes are re-formatted with the spaces you originally wanted. This means that if you need to update the values in the future you must re-insert all the & nbsp ; sequences again before updating.

Similar Messages

Vpdn-group configuration

I am replacing a 2611 with a 2811, I am copying the setups from the old router, I have a question about the following.. on the old router there was no line in my config for l2tp - I do not seem to be able to find any configuration options for it - I don't nec want to get rid of it but want to mainly know how to config it and if the same options apply for pptp? I think I have gone into all of the listed options and put in "?" is l2tp missing from the help?
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
l2tp tunnel password 7

Which IOS version are you using? , if you are using lower version, need to upgrade to version 12.4(6)
Sample VPN group configuration:
vpdn-group 2
! Default L2TP VPDN group
description L2TP for Dial
accept-dialin
protocol l2tp
virtual-template 2
l2tp tunnel password xxxxx

Grouping collected versions of Designer 6 application systems in 10g

Hello,
I wasn't sure how to make the Subject clear, hopefully I'll explain my problem anyway.
I'm testing the migration of application systems from Designer 6 to Designer 10g. Some of the v6 application systems are versioned in the sense that we created new versions and froze the current one, i.e in the RON, select Application > New Version in v6. So, we may have several 'versions' of an application system called TEST, i.e.
TEST (1)
TEST (2)
TEST (3)
... and so on to TEST (X). X is live, the rest are frozen.
In the 10g RON, each version (all frozen and live) of TEST appears as a separate Container in its own right. Imagine we have this situation with other named application systems we've migrated - we're dealing with a big list in the RON.
What I want to do is group all my TEST containers under a 'TEST' top level container to make navigating a bit easier (so I can expand the top level only if I want to see all the versions underneath). I did this and used the option 'Copy Application System' to copy TEST (1) and TEST (2) into this TEST top level. Unfortunately the audit info for TEST (1) and TEST (2) under the new TEST container has been lost - they now have today's date. As they're copies, I still have TEST (1) and TEST (2) as explicit Containers in their own right, but I can't see how to group them as I'd like without losing this audit info.
So - is this possible? If so, what am I doing wrong?
Hope I've explained myself. I should add we're not switching versioning on in 10g yet, so we've the GLOBAL_SHARED_WORKAREA for the moment.
Thanks, Antony

Michael,
Thanks again. We need to bring older versions of the frozen application systems, e.g. TEST(4), as we have interdependencies with other application systems (in terms of shared objects). Otherwise we would have only brought the latest versions over to simplify things.
When you say at the end of your reponse to 'start the SCM's method of versioning', you're talking about switching the versioning on in 10g, right? We were going to migrate our v6 content and use the GLOBAL_SHARED_WORKAREA for the moment, and enabling versioning and all that entails would be the next phase.
Antony

Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
Shahid

You can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Compile new version on net-snmp.

Hello
i would like to know if it possible to compile; install a new version to net-snmp in solaris 10. there is already one version running with svc:/application/management/sma:default
how can i compile a new version and replace this one, (smf manifest, etc) do i just edit the sma.xml and point it to the new executable in <exec_method..?
the compiled version would run in /usr/local.
thank you very much for your input.
Mario G.

It's preferable to just install it to a new location and then create a new xml file for it.
Then import the manifest file and disable the one that ships with Solaris.
The rationale is that if anything happens to the system then Sun can't point a finger in your direction.
alan

CUCM Version 7.0(2) Backup issue

Hello ladies and Gentlemen,
I Had a call manager running software version (Engineering Special 7.0.2.21015-1) and I do not have the source for this ES and I could not find it any more on Cisco Downloads like it is obsolete (correct for me if I am wrong) is there is a way to order this patch specifically one more question could I take a backup from this version (7.0.2.21015-1) and restore the backup on Version (7.0.2.20000-5) My researches guide me that is can not be accomplisied (Is that confirmed) So what shall I shall I do to back up my system with a source for my runnnig software version DVD to use it in case of DR and to restore my Backup to it.
Thanks,

Hi Karim,
you need to have exactly same CUCM version while doing the restore.
This ES might have been provided to you by TAC as a workaround to issue which u might have been facing earlier.
Two ES available are not going to help you.
Cisco Unified Communications Manager 7.0(2.21010-2) Engineering Special and 7.0(1.21007.1) Engineering Special
What u can do is open a TAC case and ask them to publish ES again?
regds,
aman

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

How can I get all photos from iPhoto to automatically back up to iCloud from my Mac OSX Version 10.6.8 operating system. Not enough memory to upgrade.

You can't. iCloud is not for general file backup from a Mac. It's for backup up and syncing data between mobile devices and and Macs and The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your (mobile) device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
But not from a Mac. If you want to backup your photos and other important files I suggest you get an external hard drive and use it with Time Machine.
OT

Error checking transport group configuration in System BQS

Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
Rahul

Hello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black

No logical system group can be determined for administrative unit &1

Dear GTS gurus,
In Risk Management module when we execute the report "Analyze LTVD Request Relevance of Products" (/SAPSLL/PRE_VD_OPT_ANL_PROD) we sometimes get the error message:
No logical system group can be determined for administrative unit *******
Now I did some googling and found the following website: consolut - /SAPSLL/PRE_VDEC139 - No logical system group can be determined for administrative unit &amp;1 - /SAPSLL/…
It says that in customizing item "Define Administrative Unit Attributes" some assignment is missing but I was not able to figure out what exactly. I compared it with Administrative Units which did not not issue any error messages and customizing looks good to me.
Can you share your insights on this topic?
Best Regards
Greg

Hello Gregor,
Under the Admin Unit attributes, you must have a Plant Group defined.
Is that Plant Group assigned to a logical system ?
(IMG: General Settings -> Organizational Structure -> Define Cross-Plant evaluation (or Define Plant-based BOM evaluation)
By the way, the site you have found is one of the many sites out there that lists the messages available in a SAP system. The same information is available within GTS (Transaction SE91).
Regards.
Mouaz BEN REDJEB

Business systems group setting in location master

Hello experts,
I am currently in the process of trying to set up the integration models for a second R3 system to be connected to one APO system. All of the locations / plants for the first R3 system were created under BSG1. The locations / plants for the second R3 system were created under BSG2.
I have identical product in both R3 systems. They have the same material numbers. The materials have existed in APO for quite some time under BSG1. When I try to send the material numbers from the second R3 system, I get an error that the materials already exist in a different business systems group. I changed the config for the second R3 system to be BSG1 (same as first r3 system). But now I cannot create an integration model for my plants, because they already exist under BSG2.
If I change my locations / plants to BSG1 would that correct my initial error message? Is there a way to change the business system group of a location once a location already exists in APO?
FYIu2026 I tried using /SAPAPO/DELETE_LOCATIONS to delete the locations and resend them, but /SAPAPO/DELETE_LOCATIONS doesnu2019t seem to do anything. After I run the program, I still have all of the locations in APO, whether the location was flagged for deletion or not.
Thanks,
Matthew Bruckner

Hi Matthew Bruckner
do you set deletion flag to your location master ? If not, please set deletion flag at first, then please delete your location by using /SAPAPO/DELETE_LOCATIONS .
To set deletion flag to your location, please perform following.
1. Open transaction /n/sapapo/loc3
2. From the menu, select "deletion flag".
(the location should be de-assigned from related data like product, model)
3. delete your location by using /SAPAPO/DELETE_LOCATIONS .
And if you have same location or same location product, I recommend you to add some kind of information to your location and product by using CIF user exit.
Please take a look at my comment in following thread.
Re: Integration multiple R/3 systems with APO via CIF
best regards
Keiji Mishima

I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud. System sais "The serial number you entered is invalid. Please try again. If problem persists contac

I just purchased a license for LR 5 (received via reseller, DVD in Box) and wanted to use the serial on the downloaded LR5 version through Creative Cloud.
System sais "The serial number you entered is invalid. Please try again. If problem persists contact Customer support".
I have tried several times, without success. Internet connection is working.
Thanks for your help.

If you have a DVD version then you have to use the serial number that is associated with the DVD version. A Cloud subscription number has no relationship to a DVD serial number.

I have tried to install the upgrade to iTunes on my Windows XP system. It tells me that I have an older version of Bonjour on my system and that it can not remove it. I have also tried to uninstall what is on my system and it will not uninstall! Help?

I have an older version of iTunes on my system. I have tried to install the upgrade and it talls me that I have an older version of Bonjour and that it can not remove it. I have also tried to uninstall what is on my system and it will not do it. Help?

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

Cisco IP Phone 8945 not present in cucm version: 7.1.5

I am trying to add a Cisco ip phone type 8945 to a CUCM version version: 7.1.5.33900-10
The phone type 8945 does not show up in the drop down window in my Callmanger.
I am trying to find out if i need to add the new firmware for 8945 and the device package ? or only the firmware will do the job ?
Suley

Hi Souley,
When you are trying to add a new model/device type you will need
to use the Device Pack
Like the latest for 7.1.5
cmterm-devicepack7.1.5.36121-2.cop.sgn
From;
http://www.cisco.com/web/software/282074299/102827/cmterm-devicepack-7_1_5_36121-2_Readme.pdf
Cheers!
Rob
"When it comes to luck you make your own "
- Springsteen

How to detect the Acrobat Browser Plug-in version installed on a users system for non-IE browsers?

How to detect the *Acrobat Browser Plug-in version* installed on a users system, on Firefox, Safari, Opera, etc?
Or one script for detecting Plug-in version for major browsers. Need full example code.

Wrote an article on this with code samples (Javascript + HTML) - basically there are differences between IE and other browsers. Chrome natively comes with the Chrome PDF Viewer so I've incorporated that in my detection script.
The script detects the browser type, and the installed acrobat version...
Have a look here:
Detect the Adobe Reader Plugin

How to Create SYSTEM GROUP in XI

Hi, all
My question is how to create system group in XI 3.0
I goto RZ21 then Technical Infrastructure --> Configure Central system --> Maintain system Group
Then Create system Group name ExchangeInfrastructure_System
After Hit enter, its not look like group, it look like subgroup entry... why? how to create group
please tell me...
I am sending screen shot how its look like
Thanks
http://www.flickr.com/photos/25222280@N03/?saved=1
http://www.flickr.com/photos/25222280@N03/2439104310/

Hi,
refer the below help
http://help.sap.com/saphelp_nw04/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm
Thanks,
RamuV

CUCM version 9.0 SNMP MIB2 System Group Configuration

Similar Messages

Maybe you are looking for