CUIC Report definition Formula field

Hello
I want to get a max value from two different columns in a custom report. Anyone have an idea how to do it. I tried the following but it doesn't work, formula is invalid:
max(${max_outbound_ipcc_calltime},${max_outbound_nonipcc_calltime})
max(values(${max_outbound_ipcc_calltime}),(${max_outbound_nonipcc_calltime}))
Finnur

You'll have better luck posting this question here:
http://developer.cisco.com/web/ccr/home
david

Similar Messages

[UCCX] Create/Edit CUIC Report Definitions

Is the ability to create/edit cuic report definitions available with Enhanced or is that Premium only?

I found this - https://supportforums.cisco.com/thread/2222847
If I'm reading this correctly (which I very well might not be), it requires premium licensing. Maybe it'd be better for me to explain what I'm after since I might not even be on the right track.
I've created copies of a couple of stock inbound reports and am trying to add grouping by state (via calling party number npa/nxx). 99% of the inbound calls are apparently from 3 or 4 states, so I figured it'd be pretty easy to implement but I haven't come up with anything yet. Any ideas would be much appreciated.
thanks,
will

How to delete CUIC Report Definition

I created a handful of reports which all use the same report definition on a premium CUIC system, then did the export/import shuffle onto a crippled (license-wise) CUIC system. Then I forgot a custom footer formula so went back and updated, export/import...and am stuck being unable to overwrite/delete the flawed report definition.
Is there anyway to delete a report definition on a non-premium CUIC? Since you can't edit the report definition used by a report, I'd have to redo everything.
thanks,
will

Will,
Try adding a version number to the Report Definition. Newer version numbers should overwrite older ones on import.
-Jameson

How to intercept variables in report's formula field via TOAD?

I have a case in this report. I have a report that generates a list of items with info of their initial stock, stock movements and final stock. no problem for the in and out stock movements.
but there's a slight problem with the initial stock. I wrote a formula field that executes several select queries to obtain the inital stock. The XML report format roughly looks like this:
Item_Name Initial_Stock Stock_In Stock_Out Final_Stock
<?Item_name?> <?CF_Init?> <?In?> <?Out?> <?CF_Final?>
As you can see, the Initial Stock and Final stock data is obtained through a formula field. And the select queries I mentioned above are employed in the formula fields. The rest of the fields are obtained directly from the SQL field in the report. Right now the report generates all items, whether their initial stock is zero or not. What I'm trying to do is not displaying items whose initial stock, stock in, stock out and final stock are zero. thanks
Edited by: 801264 on Oct 14, 2010 9:22 PM
Edited by: 801264 on Oct 14, 2010 10:39 PM

Well you could try upgrading to a more recent Java runtime for starters.
This is a native crash, which means something went wrong outside of Java code. The trouble is that you can't know WHERE it happens; The JVM itself is only a client of the machine it runs in and can be made unstable by outside influence. Under Linux it takes only one wonky shared library. It could be a driver. It could be a problem in the kernel. It could be another process. It could be anything.
It could also be a bug in the JVM of course, but the only way you have a right to report it as a bug is if you try to see if the problem persists under the latest update.

How to group a report by formula field.

Hi,
I need to create a report based on the following report:
http://s464.photobucket.com/albums/rr8/einas121809/
This new report should be grouped by days and status. Then, each group should display the details of each record such as Report No, Open Date , Due Date and Summary.
It is not a problem to display the report details, but I need to know how to group them since it involve calculation.
Thank you in advance,
Regards,
einas.

Hello,
Right what you want to do is to get a crosstab which can be found in your toolbar or under Insert menu Insert --->Crosstab.
You might need to use a working day formula something like this
WhileReadingRecords;
Local DateVar Start := {StartDate}; // place your Starting Date here
Local DateVar End := {EndDate}; // place your Ending Date here
Local NumberVar Weeks;
Local NumberVar Days;
Local Numbervar Hol;
DateVar Array Holidays;
Weeks:= (Truncate (End - dayofWeek(End) + 1
- (Start - dayofWeek(Start) + 1)) /7 ) * 5;
Days := DayOfWeek(End) - DayOfWeek(Start) + 1 +
(if DayOfWeek(Start) = 1 then -1 else 0) +
(if DayOfWeek(End) = 7 then -1 else 0);
Local NumberVar i;
For i := 1 to Count (Holidays)
do (if DayOfWeek ( Holidays ) in 2 to 6 and
 Holidays in start to end then Hol:=Hol+1 );
Weeks + Days - Hol
If you need to calculate bank holidays then you have to create an array like this
//Holiday Listing formula to go into the report header of the report.
BeforeReadingRecords;
DateVar Array Holidays := [
Date (2003,12,25),
Date (2003,12,31)
0
The workingdays formula needs to go into the Row and then distinct Count your orders. That should give you how many orders took x amount of days.
Then you need to further develop your formula so that it shows <20 days, more than 20 days etc.
Create something like this first and then ask further questions if you are stuck.
Hope this helps
Regards
jehanzeb

How to use the distinct key in formula field in SAP Crystal Reports

I want to use the distinct key in formula field in SAP Crystal reports.
When i'm using it shows an error.
Please suggest me....

Hi,
Use DistinctCount keyword directly for your calculation instead of count(distinct(....
Alternatively, if you want to avoid duplicate records, under "File" > "Report Options" make the 'Select Distinct Records' as True.
Thanks,
Raghavendra

How can we pass a formula field of Main report to SubRepor's Parameter. in CryastlReport 11

Post Author: Nikhil
CA Forum: General
Hi
Crystal Report version : 11.0.0.1282 Standard
There is MainReport1. Other is Subreport1
Scenario :
MainReport1 having paramater PdateMain1 as dateTime.
SubReport1 having parameter dateSub1 ,dateSub2.
datesub1 is used for One datasource1 (DataSource- XML -from webApplication) , dateSub2 is used for datasource2 (DataSource-SQl Procedure ) ( This is requirement as i need to used two datasource )
Value of datesub1 and datesub1 is same (it is created automatical as it is part of SQLProcedure and XML Query ) but get prompted twice for the same valuewhich is not desirable. so for that i have created main report and calling this subreport in main report.
Now i want's to pass PdataMain1 to Parameter datesub1 and datesub2. I am able to pass PdataMain1 to datesub1. through Change Sub report link ( Option on right click of report).and it is working fine,
Problem :
But Subreport link Menu does not allow to bind PdateMain1 to datesub2 as it is allready bind with datasub2.
to overcome this i created one Formula field in main report as fMaindate1 which copy date from Parameter PdateMain1.and bind ( link) the fMaindate1 to datesub2. when i link this , subreport does not display any thing at all. It it a limitation of crystal report or i am missing some thing , Is it like that we can pass formula of ,main report to subreport Paramater in Crystal 11 Standard , if we can anyone please Provide help on this.
This can be easily achieve through application programming but my need to get this done in Report itself.Thanks
Nikhil Patel

Post Author: Jagan
CA Forum: Crystal Reports
Shared variables. Looked in the help at variables - shared

Working with 3 Reports -- How to Display Summary/Formula field in Each Repo

I have 3 Report that represent three Company.
Each Company/Report has their report Details and field totals at the bottom.
Now what I am trying to accomplish is that I need to add all three companies grand total and sum it up and display at the bottom of each reports.
FYI, I have created matrix report and i pass user parameter where user can choose which company's report him/her would like to run so for example: if user run Company_1 then at the bottom i want to display all the companies Grand Total.Each reports have 6 columns and all the columns are same in each report except the data change by company. and with the same thing with Company_2, and Company_3
Now, I tried to use create a separate query and tried to use DATA LINK but it didn't work due to very awkward report design.
Is there a way where i can create a formula field and write PL/SQL and display at the bottom of my report.
Please let me know if its possible I will very appreciated.
Thank You

Thanks for your reply,
Actually, I would done that before taking Company's parameter off but i have to send out this report to all three companies thats resoan why I put companies paramters.
Also, I have solved that problem by creating new query that will give me total off each company so in my Data Model. I have Q_1 (main query), Q_2 (Company 1 query which give me total for each field), Q_3 (Company 2 query....), Q_4
and call those all fields and RESET AT REPORT level.
so, no mather which company i choose in my parameter field it will give me final total at the bottom of my report for all the departments.
Thank You,

Crystal Reports XI - How to create a new field using a formula field

I'm quite new to CR, but have been learning quickly!
I would like to know how to automatically create a new record/field based on another field in that row...
I have a report showing the following data:
Run Code     Start KM    Stop KM    Status
H2                 100            150           Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
The status is generated by comparing the 'Start KM' and 'Stop KM' against fields in another table called 'Start Odo' and 'Stop Odo'
In this example...
H2 has 'Start Odo' and 'Stop Odo' values of 90 to 160, therefore there is still 90-100 to check. The 'Start KM' and 'Stop KM' is equal to the 'start Odo' and 'stop Odo' for S3, therefore it shows completed.
My question is how do you create a formula field, which will add an entire row...displaying the values 90-100.
I've been trying to use a conditional check in the 'Start KM' column, that sees if status is equal to partial than if start km is greater than start odo (Which is the reference km) then display the value of start odo in the new row. I'm stuck at how to create a new row.
I want the final result to look like this...
Run Code     Start KM    Stop KM    Status
H2                  90              100         Partial
H2                 100             150          Partial
H2                 150             155          Partial
H2                 155             160          Partial
S3                 120             150       Completed
Any suggestions would be more than appreciated

Hi Adi
Looking at your examples it seems that you want to add a row to the existing recordset (rows fetched from the database).
If it is the case (even if based on a formula) then you can not do it within crystal. Crystal is designed to display data and ideally it should not generate the new data.
However, as per your requirement you can try to add this logic at database end. May be a command object within Crystal Reports can help you.
Let me know if you do not understand anything.
Regards
Nikhil

How to apply formula field for a chart object in crystal report XI

Hi
how to add formula field for a chartobject, i tried the following code but returns invalid condition field.
i want to show different chart in same crystal report viewer with different coursestatus values.
please suggest where ia m wrong.
               FormulaField oFormulaField;
               oFormulaField = new FormulaField();
               oFormulaField.Name = "Status1";
               oFormulaField.Text = "{CSP_PROCESS_REPORT.Coursestatus} = 'Mastered'";
               oFormulaField.Syntax = CrFormulaSyntaxEnum.crFormulaSyntaxCrystal;
               oFormulaField.Type = CrFieldValueTypeEnum.crFieldValueTypeStringField;
                boChartObject.ChartDefinition.ConditionFields.Add(oFormulaField);
regards,
Padmanaban V

i missed the following line in my code.
rcDoc.DataDefController.FormulaFieldController.Add(oFormulaField);
now it works......
my next issue is that,
chart returns True & False captions. but i want to show actual value. how its to be done
regards,
Padmanaban V

How to set a new value for formula field in crystal reports xi?

How to set a new value for formula field in crystal reports xi?//formula{@description} exemplo in VB6crxSubreport.FormulaFields.Item(1).Text = "'Subreport Formula'" orcrxSubreport.FormulaFields.Item("description").Text = "'Subreport Formula'"How to in JRC? 

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to set formula field in crystal report

Hello all,
I develope the code in C#.NET and use SAP B1 2004C. I have a problem with crystal report. I have in crystal report one unbound field. This field is string type. I need in my code change value of this field to another text ex. ("test").
I use this code:
FormulaFieldDefinitions crFormula;
            FormulaFieldDefinition crFormulafieldD1;
            crFormula = crReportDocument.DataDefinition.FormulaFields;
            //FormulaFieldDefinition test;
            //bool test = crFormula.IsReadOnly;
            string error = "";
            bool isCorrect = true;
            crFormulafieldD1 = crFormula[1];
            string ahoj = crFormulafieldD1.FormulaName;
            crFormulafieldD1.Text = " ""+OP.ToString()+"" ";
            isCorrect = crFormulafieldD1.Check(ref error);
            // Display the error message if the syntax is incorrect.
            //if (!isCorrect) MessageBox.Show(error);
The value of the field is set, but on the report isnt it. Why not. Can you help me. Send some sample.
Thanks

Hi
I've never tried to change a field of the report directly. Maybe it would solve the problem if you make a parameter field, which you can use in the formula.
You can set then the parameter field:               report.SetParameterValue("NameOfParam", valueOfParam);
Regards,
Martin

How add new field in layout in RDF using XML report definition

Hi, ALL
Do you know how add new field in layout of existing report in RDF using XML report definition. If I try change anything in RDF layout, layout which defined in XML override report layout.

hello,
in reports 6i we have this limitation, that you can not add a field to a report unless you re-default the whole report, as we do not support positioning-information in the customization file.
regards,
the oracle reports team

SAP Crystal reports formula fields

hi,
how to use formula fields in crystal report.
thanks & regards,vinoth

Hi Vinoth,
That's a very vague question.
You can create formulae via the Field Explorer > Formula option.
After you save and close the formula editor, you need to drag and drop the formula on the report for it to execute.
If you need help with a formula, please post the requirement.
-Abhilash

Crystal Report Formula field function on OLAP SAP BI/BW Cube

Dear All
We create OLAP Cube Report in Crystal Report 2008 (BO) base SAP ( DB2) BI/BW Cube, Grid report coming correctly. Crystal Report Formula Field functionalities are not avilabel or suporting. If any one explain or some kind of documentation available pl. help me.
Thanks, in advance.
Alfred.M

Hi,
you are using the OLAP Grid which will only have limited functionality. You can use the BW MDX Driver and then connect to a BEx query and you will have the complete functionality in CR
Ingo

CUIC Report definition Formula field

Similar Messages

Maybe you are looking for