Cumulative quantity has exceeded still billing have condition value.

Hi,
Requirement – One discount condition which will be applicable up to a certain quantity at billing.
Issue – Condition is getting determined at billing while cumulative quantity has exceeded.( I am using pricing type C in copy control delivery to billing).
Note –     1. I am using partial Delivery method.
               2. When creating new order functionality is working fine.
Existing Scenario-
i. I have created one condition with condition update setting.
ii. I have maintained VK11 with amount 90 Rs. and Max.cond.base value 1000 qty in additional data.
iii. I have created one sales order (ord. qty. 1500).
iv. Created 1st delivery and billing for 1000 qty.
v. When creating 2nd billing(qty 200) with same delivery, system is picking discount condition which should not happen as billing quantity has exceeded.
Please advise
Thanks and Regards,
Vinod

Hi Vinod,
Which routine have you created..did u create a routine for 'alt calc type' or 'alt cond base value' in pricing ?
If after using A or D in pricing type in copy control, the condition values are not copied from the sales order, then that means there is some issue with the copying control settings.
Anyways, now you have met your requirement.
Please close this discussion.
Regards
Jobi

Similar Messages

How do billing item conditions hit accounting?

Hello,
I am picking up the billing item condition values from KWERT and the corresponding GL Account SAKN1 from the KONV tabke. KWERT gets stored with the sign. I need to know how this condition amount will hit accounting. Would it be a debit or a credit entry on the accounting side. How can I do this? I cannot use the debit/credit indicator BSEG-SHKZG as we have a summarization on the material and we are trying to re-determine in a custom code what amounts should have posted to BSEG by material. While I am getting the amounts correctly from KONV, I am not able to figure out how these amounts should be treated on the accounting side - as a debit or a credit?
Example, on a regular invoice if the value is positive for a G/L account, on the accounting side the value is reverse in sign. However, this cannot be generalized as we can have many different types of invoices and different combinations.
Thanks,
Prayarna

Hi ,
if u are unable to use BSEG for credit or debit , then what u can do is , ask ur Functional ppl abt the condition types , which one will have -ve values in the pricing procedure..
i think is the only way to do in this case , finding which condition type is -ve.
regards
PP.

How do the billing item conditions hit accounting?

Hello,
I am picking up the billing item condition values from KWERT and the corresponding GL Account SAKN1 from the KONV tabke. KWERT gets stored with the sign. I need to know how this condition amount will hit accounting. Would it be a debit or a credit entry on the accounting side. How can I do this? I cannot use the debit/credit indicator BSEG-SHKZG as we have a summarization on the material and we are trying to re-determine in a custom code what amounts should have posted to BSEG by material. While I am getting the amounts correctly from KONV, I am not able to figure out how these amounts should be treated on the accoutning side - as a debit or a credit?
Example, on a regular invoice if the value is positive for a G/L account, on the accounting side the value is reverse in sign. However, this cannot be generalized as we can have many different types of invoices and different combinations.
Thanks,
Prayarna

Hi ,
if u are unable to use BSEG for credit or debit , then what u can do is , ask ur Functional ppl abt the condition types , which one will have -ve values in the pricing procedure..
i think is the only way to do in this case , finding which condition type is -ve.
regards
PP.

The program "RIAFVC20 " has exceeded the maximum permitted runtime

Hi ,
When running transaction IW49 we get a shortdump
Details of Abap run time error follows
The program "RIAFVC20 " has exceeded the maximum permitted runtime
and has therefore been terminated.
Can I have solution why this is happening.
Thanks In advance
Regards
Suresh kanna

Hello Suresh,
It means the program has exceed maximum work process runtime value set to paramter rdisp/max_wprun_time in your system. If you believe this program runs beyond that value, I suggest you to run the program in background.
If you can't run this in background, then increase the value of paramter rdisp/max_wprun_time. It is dynamic parameter (RZ11) where you don't need to restart SAP system after parameter change.
Hope your query is answered.
Thanks,
Siva Kumar

Condition Values different fro Billing and Excise Invoice in some cases

Hi All,
Excise Invoice for domestic sales is having different condition values.
I am scenerio like this when Billing doc manually VF01, excise Invoice in generated automatically and condition values
were corrrect.But when I create Billing Document using BAPI in program, Excise Invoice is not generating,then
we are running BDC for T-code J1IIN and creating Excise Invoice.Excise Invoice generated in second case (by BDC)
is having wrong condition values.
Can anyone explain why it is happing.Is there any user exist to copy Billing Doc condition values to Excise Invoice?
Thanks in Advance ,
Rayudu

Thanks for you response Lakshimipathy.
The above mentioned configurations were all ready done.Excise Invoice is getting generated when we create Billing Doc online.
Problem here is Excise invoice is not getting generated automatically when Billing Doc is created by our program,so we were running BDC code to created excise Invoice.
Condition values ( Duties :AED,Ecess,SHEcess) were getting calculated wrongly in excise Invoice which is created by running BDC code in program. But the Excise invoice which was created automatically while saving Billing doc manually is having correct condition values. But the billing document condition values remain the same & correct for both.
Regards,
Rayudu

How do invoice condition values hit accounting?

Hello,
I am picking up the billing item condition values from KWERT and the corresponding GL Account SAKN1 from the KONV tabke. KWERT gets stored with the sign. I need to know how this condition amount will hit accounting. Would it be a debit or a credit entry on the accounting side. How can I do this? I cannot use the debit/credit indicator BSEG-SHKZG as we have a summarization on the material and we are trying to re-determine in a custom code what amounts should have posted to BSEG by material. While I am getting the amounts correctly from KONV, I am not able to figure out how these amounts should be treated on the accoutning side - as a debit or a credit?
Example, on a regular invoice if the value is positive for a G/L account, on the accounting side the value is reverse in sign. However, this cannot be generalized as we can have many different types of invoices and different combinations.
Thanks,
Prayarna

Hi,
The values from billing for different condtions pick accouting documents for the GL's that are assigned as per the required combinations set in VKOA transaction. We do the revenue account det here. Now the values on invoice with + ve are the ones we are going to receive from the customer, so the customer account is debited and you see a negative sign. A discount is in negative on invoice which goes positive to the customer and hence positive sign. Freight goes to a Freght revenue GL since it cannot really be accouted as revenue as we end up paying the transporter though we collect from customer.
you may need a functional consultant if you are already not one.
regards
sadhu kishore

At time of return depot invoice creation , not capture Excise Condition Value

Hi,
my queastion is that
In retun process from Customer to Depot,
when user create return Depot invoice through t-code VF01 then Not capture Excise Condition Value ( JEXP - Basic Excise Duty , JCEP- Edu. Cess Duty and JA1X - Additional tax. ) at time of Depot. Invoice Creation.
we can also check Table J_1IRG23D, in this table have value of these Excise Cond. Value.
But Delivery No. is not update in table J_1IRG23D.
and I applied condition formula 356 in Procedure ZDOM02 ( Traders Pricing Procedure).
How can capture condition value of JEXP, JCEP and JA1X at time of Retrun Depot Invoice Creation ?
Guide me .....

Hi,
I have flow your define step:
Returns from Customer to Depot
1     Create a return order in Depot
2     Key in the invoice number and execute
3     Assign Order Reason and save
4     Create a return delivery and do PGR. Maintain storage location 1030
5     Create Transfer posting in MB1B with movement type 453, storage location 1030 and save
6     Note down the material document reference
7     Go to J1IG to reverse excise issue posting
8     Click "Capture"
9     Key in the material document number and series group
10     Click "Details". Now select the line item and again click "More documents"
11     Key in the original excise invoice reference created at supplying plant
12     Skip all warning message and go back
13     Maintain the internal number and the year.
14     With this, entry from RG23D will be reversed
But still the excise condition values are not being captured during invoice VF01 and std depot routing 356 is being used.
Program name of depot routing is FV64A356.
we can also check Table J_1IRG23D, in this table have value of these Excise Cond. Value.
But Delivery No. is not update in table J_1IRG23D.
Guide me.........

Absolute condition value in contract and release order

Hi,
We are creating quantity contract. When a absolute condition (value) is entered this value is considered for release qty in the contract for calculating the unit price.But when a release order is created for this contract, the same absolute value is for the PO quantity due to which there is a difference in unit price between contract and PO.
Please advice.
Regards,
Pratap

Hi,
Verify you steps, find link below:
http://help.sap.com/saphelp_470/helpdata/en/75/ee0f4d55c811d189900000e8322d00/content.htm
Reetesh

Your apple ID has been disabled i have changed my password 6 times still not working

your apple ID has been disabled i have changed my password 6 times still not working been trying to fix it for 3 hours now itunes is a joke

Jim,
This is what I posted on May 15th and it worked like a charm:
Just got off the phone with Apple Support. I have been working on this same issue for 2 weeks now. I was told to go to www.apple.com/support/itunes. Then under "Get Customer Service" choose ITunes Store Account and Billing. Then choose "Managing your account" option. You will see an option where you can email, choose this. This brings up a form that you need to fill out and submit. Just tell them that you have reviewed your account (assuming you have) and you see no fraudulent activities. Then ask them to enable your account. You should have your account enabled within 24 hours.......at least that is what I was told. I just filled out the form and submitted it.

Whenever i try to buy a new song or download an app my ipod says that "your apple id has been disabled" i have changed my password several times and it still says the same thing what can i do???

Whenever i try to buy a new song or download an app my ipod says that "your apple id has been disabled" i have changed my password several times and it still says the same thing. What can i do???

This may provide the answer:
Apple ID: "This Apple ID has been disabled for security reasons" alert appears

I have changed my PC and want to authorise it on itunes match, it looks like it has but still says i have 5 machines authorise

i have changed my PC and want to authorise it on itunes match, it looks like it has but still says i have 5 machines authorise

Sign-in to your iTunes Account, you can see which computers are authorised. If necessary de-authorise all and authorise those again that you need.

HT1296 My email address has changed. I have successfully amended it on my computer in Apple iTunes but my iphone 4s and my iPad still show the old email address when requesting the password and will not let me update Apps. Please can anyone advise me what

My email provider has changed and I have a new one.
I amended this on my computer under my Apple iTunes account without any difficulty and it was authenticated. However, I still have the original email appearing on my iphone 4s and ipad2 and I cannot update that information. Neither can I use my usual password to update my Apps. Please can anyone assist me with simple instructions on how to change these important passwords? Thankyou in anticipation for reading and hopefully considering a solution.

Thank you, this has resolved both the iphone and ipad problem immediately. I am concerned that I may have a problem with apps that I bought under my old AppleID as they will not be recognised. Any suggestions for this please?

TS3212 when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

when installing iTunes on my new laptop a message box appears saying some sort of error has occured and i have to uninstall it then reinstall it again and it still won't work what should i do?

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

Why all of a sudden has one of my apps (Condition Report App) only displaying at the top right hand corner it is a quarter of the size it should be, i have tried setting my ipad back to factory settings and this hasnt helped some please help??? :)

One of my apps (condition report app) has decided to only display on the top right hand corner which is only a quarter of the screen, not sure what has happened as i have not changed any settings went to go into it one day and it was just like it.
Please help!!!! Thanks Kristy

Do you have the most up-to-date version of the app? Did you upgrade to iOS 6? Did you check to make sure that the developer has updated the app for the new OS? Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? Have you tried uninstalling and re-installing the app?

Cumulative quantity has exceeded still billing have condition value.

Similar Messages

Maybe you are looking for