CUP Issue in workflow - Approver not found after SP13

Dear All,
We are facing an issue after upgrade to SP13 in CUP. The request is not getting saved and throwing an error - Approver not Found.
We uploaded the xml files also of SP13 after upgrade has completed.
We have not changed the workflow after upgrade and verified all the attributes of Initiator, CAD and approver is already available in CAD - but still we are receiving the error "Approver Not Found"
The same workflow is working succesfully in Production system which is under SP9.
Is this an issue with SP13. If any body has encountered please let us know how to resolve.
Thanks and Best Regards,
Srihari.K

Dear Chinmaya,
Below is the error log
Log :
2011-05-09 08:13:17,375 [SAPEngine_Application_Thread[impl:3]_25] ERROR NoApproverFoundException in Save request
com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 135, for reqPathId, 209, for path, CHNG_ANZ_Z6 and approver determinator : ANZ_LAC
Also, we tried with simple workflow as well with just 2 attribute logic. Still we received the same error
Thanks and Best Regards,
Srihari.K

Similar Messages

  • GRC CUP Error creating request. Approver not found

    Hi,
    We just upgrade from GRC CUP 14 to GRC CUP 15.6 support pack.I already performed post upgrade steps and when i try to create a request i am getting approver not found.i didnot change workflow.In stage for role approver we have approver determinator "role".
    system log report
    com.virsa.ae.workflow.NoApproverFoundException: No approvers found for req no : 493, for reqPathId, 662, for path, PROD_APPRV_PATH and approver determinator : Role
         at com.virsa.ae.workflow.bo.WorkFlowBOHelper.handleApproversTransactions(WorkFlowBOHelper.java:1469)
         at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.handleWFForNewPath(WorkFlowRequestCreateHelper.java:278)
         at com.virsa.ae.workflow.bo.WorkFlowRequestCreateHelper.createNewWorkflow(WorkFlowRequestCreateHelper.java:167)
         at com.virsa.ae.workflow.bo.WorkFlowBO.saveNewWorkflow(WorkFlowBO.java:120)
         at com.virsa.ae.accessrequests.bo.RequestBO.saveNewRequest(RequestBO.java:579)
         at com.virsa.ae.accessrequests.actions.CreateRequestAction.createRequest(CreateRequestAction.java:381)
         at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.createRequestHandler(EUCreateRequestAction.java:135)
         at com.virsa.ae.accessrequests.actions.EUCreateRequestAction.execute(EUCreateRequestAction.java:68)
         at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:295)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:431)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
         at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
         at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:461)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Please let me know solution ASAP.This is high priority.
    Thanks
    Yakoob.

    It looked like some old request stuck in DB.But, not sure about it.I tried by changing the number ranges in configuration by giving the current request number in "from number",but it didn't work.
    This is strange some time it gives "error creating request: path not found." and once this error gone then "error creating request : approver not found".
    To avoid this i created one more stage by custom approver determinator with application attribute and approver assiged.This stage, i assigned before role approver stage then it worked,Request get created and request get provisioned.
    i don't understand why it's not working,if i assigned role approver stage first in a path of workflow.role approver (approver determinator:"role" standard one, "approver" gets from configuration:roles:create role:role approver OR upload from role import).
    Please help
    Thanks
    Yakoob.

  • 5.3 CUP Approver not found error

    Hi Experts
    Having an issue on CUP. I have created a CAD for my first stage and second stage.
    1st Stage (Business Process Owner) HR and linked to approver
    2nd Stage (Role type) = Single and linked to approver.
    The request is created but when I approve the request at the 1st stage it throws out the the Approver not found error. The role attributes have also been configured accordingly.
    Any ideas Experts your help will be appreciated.
    regards,
    Donovan

    Hi
    Thanks for the assistance, I've checked on the UME the approver does exist with the necessary authorizations. Maybe it issomething in the config please tell what you did maybe I missed something small in the config. I checked and the CAD in both stages are linked to approvers and they both exist in the ume. And the role itself has been linked with the attributes such as the business process and the role type being single.

  • AE 5.2 - Detour Workflows - One of the Role Approver not found

    Hi All,
              My question is regarding using the Detour workflow functionality for the situation below - pls let me know if this possible or if any alternates are available.
    - Main path has 2 stages (1) manager approver, (2) Role Approver.
    If the Requestor asks for a Role that Does not have a Role Approver we would like to route this request to the Security lead.
    - I have created a Detour Path with 1 stages - Secuity lead and associated with Stage 2 (Role approver) of the Main path based on the condition "No Role Owners"
    - I still get the error "Approver not found at Stage @@@@"
    Is the condition "No Role Owner" in the Detour workflow config for "Role Expert" workflows or for Access requests?
    Is it possible to route the Request to Security if the Role being requested does not have a Role Approver? IF yes How?
    thanks
    T

    Hi,
    sometimes in the Detour configuration you have the problem that the "Save" action is not saved properly.
    If this entry is empty, please go into edit mode and save the detour config again, so that the action will actually display "Save".
    Hopefully it works, then.
    Regards,
    Daniela

  • SPM in CUP in a SAP GRC AC 5.3 -- "Approver not found" & "Path not found"

    hello,
    I have a problem when I try to do a request.
    I have configured the SPM in the CUP in a SAP GRC AC 5.3
    I gives me an error about "Error creating request. Approver not found ". When I took out the Manager in the Stage it gave me this error in the request "Error creating request. Path not found".
    Best regards.
    Pablo Mortera.

    You can either type in the configuration, like the what option you selected for approver (CAD or role or...etc), or other way is to capture the change log which shows what was the configuration for that stage....
    (Configuration -< Change Log -> Search Change log)
    Cheers !!
    Zaheer

  • RAR Error- Approver not found

    Dear Experts,
    I am facing following problem in RAR component.
    When i am changing Function associated with Risk Id. It gives me error Approver not found.
    What is to be done to tackle above error ?
    Rgds,
    Saurabh

    Dear Saurabh
    Have you configured the workflow in CUP to handle the 'Risk Maintenance' in RAR? If not so, please configure the workflow or check for the Custom approver derminator (CAD) in the workflow in CUP, if it is already configured.
    Alternatively, if you do not want the workflow to be triggered for changes you make in the Risk, then disable the work flow function, @ RAR - CONFIGURATION TAB-WORKFLOW-RISK MAINTENANCE-CHOOSE OPTION NO.
    Regards
    Swarna

  • "CJS-30199 The CTC classes were not found after waiting for 900 seconds."

    Here's the snippet of the sapinst_dev.log
    I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
    this stage.
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
    The CTC classes were not found after waiting for 900 seconds.
    ERROR      2007-05-10 20:19:48
               CJSlibModule::writeError_impl()
    CJS-30199  The CTC classes were not found after waiting for 900 seconds.
    TRACE      [iaxxejsbas.hpp:460]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
    Your help is much appreciated.
    Thanks and Regards,
    Satish/

    Hello Satish
    Please do following checklist:
    1. Check that the J2EE engine is up and running (e.g. log in with Admin)
    2. Check that the following application is running:
         Visual Admin => Cluster => Server => Services => Deploy
         Select "Application" and look for "sap.com/tclmctcutilbasic_ear
    3. Try to continue installation
    It could be helpful to apply the patch for CTC as per note # 938261
    before restarting.
    and also try to add more memory allocation.
    If issue persists,
    - I'd like to know which installation DVD/CD number being using ?
    - The contents of the LABEL.ASC file.
    - The installation guide reference and title used for this install ?
    - SAPINST version ?
    - Oracle version/patch level ?
    - Operating system version/patch level ?
    See also:
    Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
    Thanks
    Kenny

  • CS6 photoshop not found after downloading and putting in serial number

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
    Thanks!

    Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
    This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
    Please please help me!

  • Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
    I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
    Thanks!

    check your duplicate post.  there are two responses.

  • Error message of "404 - page not found" after downloading and installing Firefox 15

    Error message of "404 page not found" after downloading the latest version of Firefox.

    This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

  • CUP 5.3 - Approver Not Found for STD Determinator

    All,
    I am using the standard approver determinator for super user access - Super Access Owner.
    I have got an SPM Owner defined in the source system table for owners but CUP is returning an error message saying that the Approver is not found.
    The other Custom Approver Determinators seem to work but the standard one referencing SPM owners does not. Am I looking in the right place?
    Can any of you suggest how this can be corrected?
    Please advise me if you have any recommendations.
    Thanks,
    Simon
    Edited by: Simon Persin on Aug 17, 2009 11:51 AM Updated type on title.

    Hi Simon,
       Look at OSS note - 1350046. It may help.
    Regards,
    Alpesh

  • Workflow does not stop after the first reject

    Hi!
    We just got a 30-day Microsoft 365 trial at work in which we also received a Share site! I've been playing around with it a lot, especially to help them build an approval process. I believe since this is just a trial, I do not get the globally reusable Approval
    Workflow. So I tried creating a new workflow attached to a list I created.
    In this process, when the list is submitted, it needs to be approved by 2 people sequentially - John Doe & then Billy Bob.
    When I create a new workflow, I click on actions and select "Start Approval Process". After doing that, it populates Step 1 with the following line - Start Approval process on Current Item with these users. I clicked on "these users" link and added the approvers
    in sequences - John Doe, then Billy Bob.
    I saved the workflow, checked for any errors and published the workflow. While testing with this workflow, I realized that when John Doe rejects the process, the task is still assigned to Billy Bob when it is actually suppose to stop.
    How can I stop this workflow right after John Doe rejects the process?
    Any help will be appreciated!

    Hi whocareswhoiam,
    Please post your question to Office 365 forums for quick reply. Below is the link.
    http://community.office365.com/en-us/f/default.aspx
    Thanks for your understanding.
    Best regards,
    Emir

  • "Hard Disk - (3F0) BootDevice not found" after removing Windows

    Hi.
    I own a ProBook 4530s that came with preinstalled Windows 7 Home Premium. I'm a long-time Linux user, so the first step I took after buying it was shrinking the OS partition and installing Arch Linux on the newly created free space. I have used the notebook in this setup for something like a year now, but since I rarely even boot to Windows, I decided to gain some free space by deleting them entirely. Using cfdisk, I deleted their partitions.
    After a short time (about a day), I had the machine powered down, and I found some old labelless CD I wanted to inspect. I started the computed and inserted it into the drive. It was apparent it was a Windows XP installation CD, so I turned the computer off (before it finished the phase of loading drivers).
    (It's likely that the previous paragraph is unrelated to the error message, because the installation shouldn't even touch the disk at that phase. I also don't reboot often, so I'm not sure whether did the computer boot between deleting the partition and booting the Windows XP CD.)
    The next time I tried to boot the PC, I was greeted with "Hard Disk - (3F0) BootDevice not found". All HP diagnostics were OK, and when I instructed the GRUB on an Ubuntu live CD to boot into my hard drive, it booted normally.
    I admit the BIOS might be somehow confused by the partition table I have, as it begins with a lot of free space and has no NTFS partitions, but I believe BIOSes shouldn't be dependent on the OS I run. So, I have a few questions:
    Does the HP BIOS try to detect Windows, and does it do anything differently if it doesn't find Windows on the hard drive? I googled around, and didn't find anyone with experiences running just Linux on my notebook (just dual-booting...).
    If it does, is there some way I could convince it to boot into the hard drive even through it doesn't have Windows on it?
    Thanks.
    This question was solved.
    View Solution.

    I see the same error but my situation still allows me to boot up but only with the secondary HDD in the DVD writer bay. For more details, please see an existing thread on http://h30434.www3.hp.com/t5/Notebook-Hardware/Hard-Disk-3F0/m-p/1670523#M76013.
    I am suspecting that it has something to do with BIOS not reading the MBR or something.
    Have you sorted your issue on this yet?
    Cheers

  • [EPM Configuration] OracleDB - OC4J Configuration issue .... not found

    Hello,
    after analysing endlessly the existing workarounds for this problem, i conclude that mine is not posted yet.
    Intro
    In order to install EPM, i had to install Oracle Database 11g. After the installation, an error ocurred stating that configurations were not saved and i could run manually "ECMA.bat" later.
    I tried to configure it by creating environment variables such as:
    - ORACLE_SID
    - ORACLE_HOSTNAME
    - ORACLE_UNQNAME
    So far, i haven't tried to executed ECMA.bat for the last time, since I am quite sure that i will fail due to not recognizing the hostname.
    The issue
    Whili trying to make sure that the database is correctly configured, i tried to access to the webpage, unsuccessfully.
    Then i found my problem in the forums:
    When i type in CMD:
    --> (I type)
    C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1>emctl status dbconsole
    --> (returns)
    OC4J Configuration issue. C:\OracleDB_app\alexandreyin\product\11.2.0\dbhome_1/o
    c4j/j2ee/OC4J_DBConsole_HPCM.lab.pt_orcl not found.
    In fact there was no folder with that name, nor something like "/OC4J_DBConsole_localhost_orcl" as many posts suggests.
    I only have folders like:
    - "home"
    - "oc4j_applications"
    - "OC4J_DBConsole"
    - "OC4J_Workflow_Component_Container"
    - "OC4J_Workflow_Management_Container"
    - "utilities"
    - "deploy_db_wf"
    Some posts suggests me to change my /driver/etc/host file, but i think my current file is correct:
    --> (Content of host gile)
    127.0.0.1 localhost
    XX.XXX.XXX.XXX HPCM.lab.pt
    Honestly, i am out of ideas and i wish any experienced colleague could give me a hint.
    Thanks in advance

    Hi,
    It is worth having a look at the following document on Oracle support.
    Problem - emctl start dbconsole Fails with Error OC4J Configuration issue OC4J_DBConsole_<HOSTNAME>_<DBNAME> not found *[ID 555218.1]*
    Linux 64bit DBConsole Fails With "OC4J Configuration issue cannot find /oc4j/j2ee/oc4j_DBConsole_..." *[ID 462325.1]*
    Thanks,
    HyperEPM

  • Is anyone else having random file access issues? including "Element not found" error?

    I don;t know what the @#$ is going on with this device, but for example:
    user A creates a folder in their area(under a share with RW rights)
    Everything is great..
    They come in on day2, and all of a sudden, they get "Access denied" on the (excel) file
    Typically, if I re-apply full rights for them using windows permissions, it "fixes" it.
    Today, I went to modify a excel spreasheet that I've been using for a week or so, and boom, access denied
    and effective permissions indicate that very thing: no rights.
    I attempted to re-apply rights to my home directory, and on that particulat .xls, got a "Element not found" message.
    I'm sad that I've had SO much trouble with this device.
    I re-sycned with A/D just for kicks, no help.
    It syncs with A/D daily
    I've had so many of these related permissions issues, we're likel;y scrapping the Lenovo for a windows server, but I figured I'll see if anyone else is dealing with this message..
    I'm  also open to the fact that it could be our A/D I suppose..

    Sorry to reply to such an old topic, but I am having exactly the same issue.  Did you ever find a fix?  We are reapplying all the parent folder settings every morning to bandaid the situation, but it is becoming a little ridiculous...
    We have our settings so that a file administrator has full access to everyone's files, and each individual has full access to their own folder.  The folder settings never change, but the files seem to lose the user's access permission periodically after being opened or edited (haven't narrowed down the exact cause, but has never happened to files that haven't been accessed, but doesn't always happen to files that have been accessed).  One odd thing that might have something to do with it, the ownership of files keeps defaulting to a generic 63353/UNIX instead of the creator of the file or the owner of the parent folder (which is set the way we want).  We are currently experiementing with changing it, but it seems ike if we set the owner to the user, the file administrator randomly loses access, if we set to the file admin, the user randomly loses access.  I think we might be can bandaid the situation from the user's perspective with this, but it doesn't seem to fix the initial issue, that the folder permissions won't stay set.

Maybe you are looking for