Currency format issue

I have a currency column need to display the data 4000000.00 as $4,000,000.00
ie;basically need to have a comma in the format.
is there a function which can do this instead of setting the format at the SQLplus prompt?
Thanks

select to_char(4000000, '$999,999,999.00') from dual;

Similar Messages

Currency formatting issue in etext delimeter based template

Hi,
I want display as below
if amount is
55 --55.00
55.6 --55.60
55.21 --55.21
0 --0.00
.21 --0.21
null --blank
It's urgent for me.Please help me...
Thnaks
Praveen

use
FORMAT_NUMBER function along with if condition to handle the null
IF AMOUNT='null' THEN
'' -- Blank
ELSE
FORMAT_NUMBER("987654321", "999,999.99")
END IF;

Currency format combined with if else issue

Hi all,
Basically, I need to get the value from if else statement, then use currency format to format the currency according to their currency code.
the following is my if else statement to show the A.PAY_PROMISE_AMT or A.PROMISE_AMT
<?xdofx:if A.PAY_PROMISE_AMT <> 0 then
A.PAY_PROMISE_AMT
else
A.PROMISE_AMT
end if?>
<?format-currency:value_*[this value I want to use is the value from the above if else statement];*currencycode; ‘false’?>
could anyone help me to combine those two statement to get the result I want?
Thanks in advance

>
I tried your solution, but I got some error.
>
some?
try change
<>to
!=in my sample
what if you try IF without xdofx?
what will be result?
say
<?if:A.PAY_PROMISE_AMT!=0?> <?xdoxslt:set_variable($_XDOCTX, 'LVar', A.PAY_PROMISE_AMT)?> <?end if?>
<?if:A.PAY_PROMISE_AMT=0?> <?xdoxslt:set_variable($_XDOCTX, 'LVar', A.PROMISE_AMT)?> <?end if?>
<?format-currency: xdoxslt:get_variable($_XDOCTX, 'LVar');CURRENCY;'true'?>plz see
Working with xdofx:if and xdoxslt variable error

Currency format in LAC

Hi,
We are working with LAC, and we have an issue.
When we create an auction in SRM the currency format for the start price and the others is 1,234,567.89 (this is correct for us), but when we execute the applet (LAC) the format change 1.234.567,89
The user in SRM has the correct format 1,234,567.89 then, Why in the applet the format is different????
How can we change the format????
We are working with EP then, we execute the transaction bbp_auction since a Portal iview. Our single sign On between LAC and Portal was configurated, then we guess, we need to change the currency or number format in the Portal User, Is that correct?????
What user do we need to change (currency format)???? SRM user???? Portal user???? LAC user????
Thanks

Hi Claudia,
Check the following note :
Note 666849 - Running LAC in non-US locales
This may help you.
Thanks,
Pradeep.

Currency format problem while exporting as excel

Hi
I have to create a report for which the currency format should be $#,##0.00 and -$#,##0.00 for negative numbers.
In the text form field of rtf template, I have selected number format and removed the portion ;($#,##0.00) from $#,##0.00;($#,##0.00).When I view the report as HTML the numbers are showing in proper format.($#,##0.00 or -$#,##0.00).But when the report is exported as excel ,the negative number format changes to ($#,##0.00) in red color.
Can anyone tell me how avoid this problem?
Thanks in advance
Naveen

I think this is an Excel issue - you can right mouse click in Excel the column header and "Format Cells>Text"
You could also append a ' character to your numbers in BI Answers ie: '6035784010491980 which should give you the correct format in Excel.
eg. CONCAT( '''', CAST ( '6035784010491980 AS CHAR) )
There is also an MS Office plug in available for OBIEE this may give you further options.

Currency Format in Crystal Report Version 10.5 (Free With Visual Studio)

Hi ,
We are using free version of crystal report that comes with VS2008.
We are in the need to display the amount in the following format and we are not able to do so. Here is what we need to achieve
10000000---- Need to display as 1,00,00,000
1000000---- Need to display as 10,00,000
100000 -
Need to display as 100,000
10000 -
Need to display as 10,000
Please let us know what currency format we can use or what is the other technique to resolve this issue.

you should be able to format as a number with thousand delimiters. right click Format - > number tab
if not display as text
@amount
totext(youramountfield, 0,",")
Ian

Problem with currency format setting

hello experts,
i have one currency filed FDES-WRSHB = 25706515.32.
i want this field to be converted into currency format which user have selected.
for ex if user setting for currency in SU01 is 1,23,456.89 then this currency should be converted to 25,706,515.32.
or if default setting is 1.23.456,78 then it should be converted to 25.706.515,32.
please tell me how to achieve this... any FM available?
or tell me how to read these user default setting so i can explicitly convert currency format.
-Shweta
Edited by: shweta chavan on Feb 6, 2009 7:19 AM

Hi Shweta,
I had the same issue,we dont need to do anything,the display will come automatically in the User format(specified in SU01/SU3).We dont need to use any FM or any coding.
If u chanegd any settings in SU01/SU3 u need to re-login to see the changes,for example the setting were like 1.23.456,78 and u changed to 1,23,456.89 then it will not reflected immediately.U need to log-off and log-in again to see the changes.
Hope this helps.
Thanks & Regards,
Rock.

Problem Adding Calculations to Currency Formated Cells

I have a cell that is formated in currency (USD in this case, i.e. $1,000) and I want to add a calculation to that cell. I double click on the cell with the $1,000, put the cursor at the begining of the cell (before the $) and push "=". A forumula rounded box with a X and √ appears. I type in "+500". Now what shows is "=$1,000+500". I push return and get a syntax error! I now have to go back and delete the comma and the $. Yuck.
It's even worse, if you have a cell with $10 in it. Then the above process thinks it referencing row 10!
Excel handles this issue seamlessly.
Any ideas? Is this a bug?

Numbers is not MS Excel, and MS Excel is not Numbers. Each application has features that are not supported by the other.
Not a bug, although it does appear to be a not-well-thought-out feature.
The issue is that once the $ is in the entry box, the whole "$1,000" is perceived (within that cell) as a text string. Any formula using one of the arithmetic operators will choke on text.
The second use of the $ sign is as the absolute reference operator. If it preceded a number equal to or smaller than the largest row number on the table, the combination will be interpreted in a formula as an absolute reference to that row, or to the cell in that row in the same column as the formula; whichever better fits the reference in that formula.
Either way, you're not going to get the result you want, and you are likely to get a syntax error message.
OTOH, in a cell where the fixed number has been entered as the result of an equation (eg. =1000), formatting the cell as currency will change the displayed value, but not the value as it appears in the entry box. Neither the $ sign nor the thousands separator (,) will appear, you will be able to append "+500" (without the quotes) to the end of the formula, and you will get the expected result ( $1,500) displayed in the cell. And, as the formula itself contains NO $, the issue of 10 being recognized as a row reference will not arise.
For my own use, I'd simply avoid the currency format except for summary cells. A column containing a list of numerical values (with two places after the decimal) is easily recognized as a list of currency amounts, even without to $ sign. The same list with the sign applied to every value is cluttered, and more difficult to read.
Regards,
Barry
PS: If you want this feature changed in a future edition of Numbers, your best route is to Provide Numbers Feedback, using the menu item of that name in the Application menu (in Numbers, the "Numbers" menu). The link will also take you to the feedback page.

Currency format and Right Align not working for messagetext in HGrid

Hi
We are dynamically enabling MessageTextinput inside HGrid region, it is Number type and when we set readonly to True it become left align, and currency format also not working, I tried the below various options but nothing is working.
Option : 1
OAMessageTextInputBean attribute = (OAMessageTextInputBean)webBean.findChildRecursive("Attribute"+i);
attribute.setCurrencyCode("USD");
Option :2
OAWebBean amountDueBean2 = webBean.findChildRecursive("Attribute"+i);
oracle.cabo.ui.validate.Formatter formatter2 = new OADecimalValidater("#,##0.00;(#,##0.00)","#,##0.00;(#,##0.00)");
amountDueBean2.setAttributeValue(ON_SUBMIT_VALIDATER_ATTR, formatter2);
etc options we tried
amountDueBean2.setAttributeValue(CURRENCY_CODE,formatter2);
amountDueBean2.setAttributeValue(OAWebBeanConstants.CURRENCY_CODE,"USD" );
Please help on this issue.
We are using Jdeveloper 10.1.3.3.0.3
TiA
Babu

Anatoli,
Hello!
I don't know if my situation is the same as yours, but after a lot of head-scratching, forum searching and template rebuilding, I finally figured out my problem.
I had one column that no matter what I did kept appearing in Excel as text. I'd format it to Number in Excel and nothing. When trying to sum the column, Excel would not recognize any of the values as numbers. I even did the reformatting on the XML Word template to number, and the currency format that Adam mentions. Still no go. The $ and ',' appeared, but column still formatted as string.
I just finally noticed Adam's mention of the 2 extra spaces at the end of the numbers and sure enough mine was doing the same thing. Take out the 2 spaces and voila! Number!
Every time I redid my template in Word (07 and 03), I used the wizard. (Add-ins>Insert>Table>Wizard) walked through the steps, not really changing anything. Then I would preview and the spaces would be there. The column that I was having problems with was the last column of the table, which would get the text 'end G_ASSIGNED_CC' inserted in after the field name - separated by 2 spaces. Once I took out these two spaces, so the column now shows 'COSTend G_ASSIGNED_CC', it worked fine in Excel - all numbers.
Hope that helps someone out there as I was having a heck of a time finding anything (solutions anyway) on this.
Thanks,
Janel

CHECKING for currency format

Hi,
       i am checking the currency format amount.the rule is Right justify amount decimal point and 2 decimal places. Not to use commas or the $ sign.
for the above condition the code is:
data:val type string.
val = '123456789.00'.
if val co '.0123456789'.
    shift val right deleting TRAILING space.
else.
    if val cs ',' or val = '$'.
      replace ',' with space into val.
      replace '$' with space into val.
    endif.
endif.
but iam getting '$' and ','. mark in o/p.
how can we check this condition.help me out from this issue.
Thanks
Message was edited by:
        skk

Try this.
[code]parameters : val(30) type c.
data : final(30) type c,
       cnt type i,
       v type c,
       n type i.
cnt = strlen( val ).
do cnt times.
move val+n(1) to v.
if v ca '.0123456789'.              "Bring in the values
move v to final+n(1).
*elseif v = ',' or v = '$'.             "<---no need of this
*continue.                              "<----no need
endif.
n = n + 1.
enddo.
condense final no-gaps.
write:/ final .[/code]
regards,
vijay

Currency conversion issue in SPM. We are getting incorrect results with SPM conversion function from one of the document currency to USD.

Currently we are using SPM 2.0 version and we have been facing currency conversion issues.
Please help me in following aspects.
1) Where actually currency conversion happens in SPM. Is it the global program which does the conversion or other way.
2) We have conversion issue for one of the currency where conversion function is giving incorrect results when converting from one of the document currency to USD. here The respective document currency is considering the 1:1 ratio with Dollar which is actually incorrect.
3) We have verified in both BI side(currency tables) and even ECC side.
Please help me in understanding this issue and let me know if you need more information on this.
Its an production issue and appreciated your immediate inputs.
Thanks
Kiran

Hi Arun,
The following information may be helpful to you.The SSA_HELPER_PROGRAM has options regarding currency settings.
EXCH_RATE_TYPE: This flag governs the exchange rate type which will be used for currency conversion in data management. For example if RSXAADMIN contains an entry EXCH_RATE_TYPE = „ZSPM‟ then the conversion type used for currency conversion is ZSPM. The default value for the exchange rate type is „M‟. More details can be found in the note 1278988.
CURRENCYCONVERSION: By default data management converts all the measures in transaction currency to reporting currency and copies over to the corresponding measure in reporting currency. If the measure in reporting currency is already available in source it might be desirable to disable the currency conversion. To disable the conversion you can make an entry CURRENCYCONVERSION = „ „ in the table RSXAADMIN. This can also be achieved by running the program SSA_HELPER_PROGRAM with the option DEACTIVATE_CURRENCYCONVERSION. The conversion can be reactivated by running the same program with option ACTIVATE_CURRENCYCONVERSION.
UNITCONVERSION: Similar to above. To deactivate unit conversion you can use the program with option and DEACTIVATE_UNITCONVERSION and to reactivate ACTIVATE_UNITCONVERSION. By default both the conversions are switched on
EXTERNAL_CURRENCIES: Normally most of the international currencies are stored with two decimal places however certain currencies do have 0 and 1 decimal place too. For example JPY has 0 decimal places. SAP internal format stores even these currencies with 2 decimal places and at the time of display it changes the value to right decimal places. In case a file from external source is loaded to SPM it might have the format with 0 decimal places in the file. To convert it to SAP standard format post processing needs to be done on this value. If that is the case you can set the flat EXTERNAL_CURRENCIES = „X‟ in the table which will enable the post processing for these values. This flag can also be set and reset using the helper program using the option TURNON_EXT_CURRENCY_FORMAT and TURNOFF_EXT_CURRENCY_FORMAT.
Kind Regards,
John Harris
Senior Support Engineer, SAP Active Global Support

In Scripts how to print the values in currence format

Dear abap guru's,
I am working on Purchase Order Script, copy from the standard script, after that wrote a one perform , in that added one new field to script, but value is printed like this formate : 1000.00, but i want to print 1,000.00 like this currence format. let me know the any solution
thanks to all
raj.

Hi ,
When you are populating the value in perform instead of assigning the value (using = ) pass it using WRITE TO.
Like : WRITE lw_total TO output-value.
Declare lw_total as currency field.
Regards,
Rajitha.

Crystal for VS 2010 - formatting issues in viewer (extra space) again

We're having the same problem as the one in this thread link:[Crystal 2008 for VS 2010 - Report formatting issues in viewer (extra space);. There's no resolution in the thread and it's been closed. I'm hoping that creating a new thread may cause someone to answer this problem.
We have a Windows App that we just converted to .NET 4.0 and updated the viewer to the Crystal Reports Viewer in VS 2010. When we open a report that has a large block of static text in paragraphs left-aligned the spacing around punctuation is awful - there's almost a tab's worth of space between the last letter and the period. U.S. looks like US. This happens both with reports that were created in VS2008 and ones that were created in VS2010. It is only a problem in the viewer's display - if we print to a printer or export to PDF the spacing around punctuation is fine. It's also not a problem on our development workstations which are running Windows 7, but is a problem on our test servers which are running Windows 2003 Server. I ran the modules tool and found that the version of usp10.dll does match what the previous thread said it should be and it's coming from the c:\program files\sap businessobjects\crystal reports for .net framework 4.0\common\sap businessobjects enterprise xi 4.0\win32_x86\ folder. On my development machine when I run the modules tool I notice that a second instance of usp10.dll is called which is the version installed with Windows 7. We've tried changing fonts but none of the ones we've tried (originally in Times New Roman, 12, tried Arial, Times and various sizes) have made a difference. We also tried changing the print options with no improvement. The only thing that makes it slightly better is full-alignment but our customer insists that it be left-aligned.

Re. the other thread. I never did receive a sample of the report to test with. Perhaps I can get one from you? I need you to ensure that the issue occurs with a "saved data" report. If it does, let me know if you can share it and I'll contact you via email. My comment in the other thread re. available time, priorities, etc., still applies. Also, just to be clear. Service Pack 2 for CRVS2010 is closed now. Thus if I am able to reproduce the issue the fix will be targeted for October \ November time frame - no guarantees though...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How to resolve formatting issue when eprint from an iPad to Officejet 4500

Just activated the eprint app on my IPad. It found my HP Officejet 4500 Wireless printer but the formatting is wrong when printing an email. Is there a solution?

Do you maybe have a photo of the formatting issue you could post here? Thanks, Ciara
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Printing-photos-from...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

Currency format issue

Similar Messages

Maybe you are looking for