Issue with Opportunity schema contained in Opportunity.wsdl and Integration

There is Opportunity XML schema object defined for Siebel web-service with URI “urn:/crmondemand/xml/opportunity” in opportunity.wsdl and opportunity.xsd contained in integrationevent.zip. Please find attached the schema files.
If you check the diff, the opportunity schema is different, which is actually a conflict from Siebel side since it is the same object identified by URI “urn:/crmondemand/xml/opportunity”. Can we get some information about the discrepancy from Siebel OD team?
Following compiler error comes for the BPEL process, where both Opportunity wsdl and integration event being used:
Error:
[Error ORABPEL-10903]: failed to read wsdl
[Description]: in "bpel.xml", Global Type declaration/definition of name '{urn:/crmondemand/xml/opportunity}Opportunity' are duplicated at the following locations:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [line#: 89]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [line#: 12]
There are at least two of them looking different:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [difference starting at line#:635]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [difference starting at line#:558]
Global Type declaration/definition of name '{urn:/crmondemand/xml/opportunity}Team' are duplicated at the following locations:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [line#: 2602]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [line#: 2524]
There are at least two of them looking different:
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.wsdl [difference starting at line#:2602]
file:/C:/Bhavnesh/Work/SiebelPoll/SourceCode/SiebelPoll/JDSU_SiebelToODSOpportunityTransfer/bpel/opportunity.xsd [difference starting at line#:2524]
[Potential fix]: If your site has a proxy server, then you may need to configure your BPEL Server, designer and browser with your proxy server configuration settings (see tech note on http://otn.oracle.com/bpel for instructions).
Following is the difference between two schema:
New line in opportunity.wsdl
<xsd:element name="ListOfOpportunityContactRole" maxOccurs="1" minOccurs="0" type="xsdLocal1:ListOfOpportunityContactRole"></xsd:element>
Difference between the sequence of elements in both schema:
<xsd:complexType name="Team"><xsd:sequence><xsd:element name="OpportunityAccessId" maxOccurs="1" minOccurs="0" type="xsdLocal1:string30"></xsd:element>
<xsd:element name="OpportunityTeamId" maxOccurs="1" minOccurs="0" type="xsd:string"></xsd:element>
Thanks and regards,
Bhavnesh Patel.
Edited by: bhavnesh_p on Oct 9, 2008 1:24 PM

Hello Bhavnesh,
we just got into the same issue with the differing Opportunity-XSD/WSDL you have mentioned in your posting.
Following is the difference between two schema:
New line in opportunity.wsdl
<xsd:element name="ListOfOpportunityContactRole" maxOccurs="1" minOccurs="0" type="xsdLocal1:ListOfOpportunityContactRole"></xsd:element>
Difference between the sequence of elements in both schema:
<xsd:complexType name="Team"><xsd:sequence><xsd:element name="OpportunityAccessId" maxOccurs="1" minOccurs="0" type="xsdLocal1:string30"></xsd:element>
<xsd:element name="OpportunityTeamId" maxOccurs="1" minOccurs="0" type="xsd:string"></xsd:element>Did you get any update on this problem?
Thanks in adavance & Best regards..
Andre

Similar Messages

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,00 songs and They are all in my music folder..What can I do to fix this issue?

I'm having a huge issue with itunes locating my missing files..and it's too many for me to locate 1 by 1..It says I'm missing over 3,000 songs and They are all in my music folder..What can I do to fix this issue? I've looked at all the tutorials on youtube and none of it works. I recently got a new computer and I Back-Up all my music and itunes playlist and I import it on my new computer with the new itunes and I go to play a few songs, it says I'm missing them I locate a few but it's still like 3,000 missing and again they are all on the computer and in one folder..Please Help !

I did that and nothing changed half my songs still have examination marks beside them
I also just tried dragging my folder of music int he playlist and it duplicated all of my songs? My playlist was at 5k now it's at 10k becuz of 3 duplicates of songs. Is there a way to delete multiple duplicate files?

HT4623 i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off

You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+

I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be

I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA

Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos.

TS1702 I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history

I'm not able to update Smurf's Village. Tried most of the things proposed on the net including restarting the iPad and trying syncing with the computer. Had a similar issue with another application. Had to delete and reinstall it, with all history lost.
Tried following up with the developer's instruction. Didn't help. Developer suggested contacting Apple if their instruction didn't work. Tried the various methods recommended on the Apple site. Same result.

Telling is that you tried most of the things on the net doesn't tell us exactly what you did try, so we are all still left to guess .....
Sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again
If that doesnt work - go to Settings>General>Date and Time - set the date ahead by a few months. Try to update again. If you get an error message of any kind - go back and change the date and time to automatic again. Then try again.
If that doesn't work, restart your router and reboot the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
I have attached the url of the unwanted site.

Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

Performance issues with respect scheme registration,select & insert query

I am facing performance issues with respect to schema registration,Select & insert query towards 10.2.0.3 version.It is taking around 45 minutes to register schema and it is taking around 5 min to insert a single document into xml db where as it was taking less than min to insert a single document into xml db of 9.2.0.6 version.Would like to know the issue and solution to resolve this issue.Please help me out on this as it is very urgent for me

Since it appears that this is an XML DB specific question, you're probably better off posting in the XML DB. The folks over there have much more experience with the ins and outs of that particular product.
Justin

Issue with plumtree JSR container 1.1

Hi,
We have deployed the plumtree JSP container 1.1 on BEA weblogic application server 8.1 sp4 we have facing issue with the portlets and when trying to integrate the documentum JSR 168 portlets the portlets response is not coming within the portlet context. its opening as full page and not within the portlet.
Please let us know in case you have seen any similar issue.

Hi
No Problem. Thanks for the fix. Will wait for the patch to be available. Put in a workaround for the moment, but patch will definitely be great.
With Regards

Issue with creating array of custom data type - WebLogic Integration

Hi,
We are doing WebLogic integration with Siebel for which from Siebel side we have generated java wrapper class which has all the methods, input\outputs defined and in\out params are serialized along with get\set methods. Following are the details of the input\output args.
Account_EMRIO.java
public class Account_EMRIO implements Serializable, Cloneable, SiebelHierarchy {
protected String fIntObjectFormat = null;
protected String fMessageType = "Integration Object";
protected String fMessageId = null;
protected String fIntObjectName = "Account_EMR";
protected String fOutputIntObjectName = "Account_EMR";
protected ArrayList <AccountIC> fintObjInst = null;
Above class also includes constructors\overloaded constructor\getters\setters
public AccountIC getfintObjInst() {
if(fintObjInst != null) {
return (AccountIC)fintObjInst.clone();
}else{
return null;
public void setfintObjInst(AccountIC val) {
if(val != null) {
if(fintObjInst == null) {
fintObjInst = new ArrayList<AccountIC>();
fintObjInst.add(val);
For the nested user defined data type AccountIC, it is defined in another java class as below
AccountIC.java
public class AccountIC implements Serializable, Cloneable, SiebelHierarchy {
protected String fname = null;
protected String fParent_Account_Id= null;
protected String fPrimary_Organization = null;
With the above, I was able to get all the AccountIC in the wsdl correctly and using this I was able to set the input param in the client
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fintObjInst" type="tns:accountIC" minOccurs="0"/>
</xs:sequence>
<xs:complexType name="accountIC">
<xs:sequence>
<xs:element name="fName" type="xs:string" minOccurs="0"/>
<xs:element name="fParent_Account_Id" type="xs:string" minOccurs="0"/>
<xs:element name="fPrimary_Organization" type="xs:string" minOccurs="0"/>
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
Now, I wanted to make slight difference in getter method of class Account_EMRIO method getfintObjInst so that an array of AccountIC is retured as output.
public ArrayList<AccountIC> getfintObjInst() {
if(fintObjInst != null) {
return (ArrayList<AccountIC>)fintObjInst.clone();
}else{
return null;
With the above change, once the wsdl is generated, I am no longer getting fintObjInst field for AccountIC due to which I am unable to get the array list of accountIC
WSDL:
<xs:complexType name="accountEMRIO">
<xs:sequence>
<xs:element name="fIntObjectFormat" type="xs:string" minOccurs="0"/>
<xs:element name="fIntObjectName" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageId" type="xs:string" minOccurs="0"/>
<xs:element name="fMessageType" type="xs:string" minOccurs="0"/>
<xs:element name="fOutputIntObjectName" type="xs:string" minOccurs="0"/>
</xs:sequence>
</xs:complexType>
The issue that I am facing here is, we have a custom data type(AccountIC) which has several fields in it. In the output I need a array of AccountIC. In the java bean, when this type was defined as
protected ArrayList <AccountIC> fintObjInst = null; I was unable to get a array of AccountIC. this gets complicated as inside a AccountIC there is array of contacts as well and all the time I am getting just the first records and not a array.
To summarize: How to get xsd:list or maxoccurs property for a field in WSDL for the user defined\custom datatype?
Can someone help me with this.
Thanks,
Sudha.

can someone help with this??

Issues with parallel processing in Logical Database PCH and PNP

Has anyone encountered issues when executing programs in parallel that utilizes the logical database PCH or PNP?
Our scenario is the following:
We having have 55 concurrent jobs that execute a program that use the logical database PCH at a given time. We load the the PCHINDEX table with the code below.
      wa_pchindex-plvar = '01'.
      wa_pchindex-otype = 'S'.
      wa_pchindex-objid_low = index_objid.
      APPEND wa_pchindex TO pchindex.
We have seen instances where when the program is executed in parallel, with each process having its own range of positions id's, that some positions are dropped or some are added that is outside the range of the given process.
For example:
process 1 has a range of positions ID's 1-10
process 2 has a range of positions ID's 11-20
process 3 has a range of positions ID's 21-30
Process 3 drops position 25 and adds position 46.
Has anyone faced a similar issue?
Thanks for your help.
Best Regards,
Duke

Hi,
first of all, you should read [Using Parallel Execution|http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/usingpe.htm#DWHSG024] in documentation for your version - almost all of these topics are covered there.
1. According to my server specification how much DOP i can specify.It depends not only on number of CPU. More important factors are settings of PARALLEL_MAX_SERVERS and PARALLEL_ADAPTIVE_MULTI_USER.
2. Which option for Setting Parallel is good - Using the 'alter table A parallel 4' or passing the parallel hints in the sql statementsIt depends on your application. When setting PARALLEL on a table, all SQL dealing with that table would be considered for parallel execution. So if it is normal for your app to use parallel access to that table, it's OK. If you want to use PX on a limited set of SQL, then hints or session settings are more appropriate.
3. We have a batch processing jobs which are loading data into the tables from flat files (24*7) using sql loader. is it possible to parallel this operation and any negative effect if enabled parallel.Yes, refer to documentation.
4. Query or DML - which one will be perform best with parallel option.Both may take advantages of using PX (with some restrictions to Parallel DML) and both may run slower than non-PX versions.
5. What are the negative issue if parallel option is enabled.1) Object checkpoint happens before starting parallel FTS (true for >=10gR2, before that version tablespace checkpoint was used)
2) More CPU and memory resources are used with PX - it may be both benefit and an issue, especially with concurrent PX.
6. what are the things to be taken care while enabling the parallel option.Read the documentation - it contains almost all you need to know. Since you are using RAC, you sould not forget about method of PX slaves load balancing between nodes. If you are on 10g, refer to INSTANSE_GROUPS/PARALLEL_INSTANCE_GROUPS parameters, if you are using 11g then properly configure services.

Performance issues with Oracle EE 9.2.0.4 and RedHat 2.1

Hello,
I am having some serious performance issues with Oracle Enterprise Edition 9.2.0.4 and RedHat Linux 2.1. The processor goes berserk at 100% for long (some 5 min.) periods of time, and all the ram memory gets used.
Some environment characteristics:
Machine: Intel Pentium IV 2.0GHz with 1GB of RAM.
OS: RedHat Linux 2.1 Enterprise.
Oracle: Oracle Enterprise Edition 9.2.0.4
Application: We have a small web-application with 10 users (for now) and very basic queries (all in stored procedures). Also we use the latest version of ODP.NET with default connection settings (some low pooling, etc).
Does anyone know what could be going on?
Is anybody else having this similar behavior?
We change from SQL-Server so we are not the world expert on the matter. But we want a reliable system nonetheless.
Please help us out, gives some tips, tricks, or guides
Thanks to all,
Frank

Thank you very much and sorry I couldnt write sooner. It seems that the administrator doesnt see the kswap going on so much, so I dont really know what is going on.
We are looking at some queries and some indexing but this is nuts, if I had some poor queries, which we dont really, the server would show pick right?
But he goes crazy and has two oracle processes taking all the resources. There seems to be little swapping going on.
Son now what? They are all ready talking about MS-SQL please help me out here, this is crazy!!!
We have, may be the most powerful combinations here. What is oracle doing?
We even kill the Working Process of the IIS and have no one do anything with the database and still dose two processes going on.
Can some one help me?
Thanks,
Frank

Memory leak issue with link server between SQL Server 2012 and Oracle

Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?

So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Issue with Multiple LTS for a fact table and filters

Hello,
I am facing an issue with obiee 10g.
In my model, I have a huge FACT table F1 (partitioned and indexed). The average response time for the queries, which targeted it, was ~30-60 seconds, which was not really convincing our end user.
So, we decided to create a materialized view, which removes some dimensions that are not used by default, but might be used if the end user adds some filters. I added the Materialized view in the Physical Layer and in the corresponding Logical Table Source.
I then tried to see if it works, but I was a bit surprised by the result. Indeed,
-> If the report does not reference a truncated dimension, it targets the materialized view. -> Perfect
-> If the report does reference a truncated dimension in the columns, it targets the Fact Table. -> Perfect
-> If the report does reference a truncated dimension in the Filters, it targets the materialized view. For this reason, the filter is never resolved and no join on the dimension table is applied, whereas it exists in logical SQL generated. -> Ko.
A suggestion could be to add the filters into the columns, but I am not satisfied by this response because it will never use the materialized view in that case.
An other suggestion could be to use query rewrite, but I 'd like to have the full control on the generation of the queries.
Does someone know if the filters are not evaluated to determine which LTS to use? How can I force this evaluation?
Regards,

Hi,
If I understand your description correctly, then your materialized view skips some dimensions (infrequent ones). However, when you reference these skipped dimensions in filters, the queries are hitting the materialized view and failing as these values do not exist. In this case, you could resolve it as follows
1. Create dimensional hierarchies for all dimensions.
2. In the fact table's logical sources set the content tabs properly. (Yes, I think this is it).
When you skipped some dimensions, the grain of the new fact source (the materialized view in this case) is changed. For example:
Say a fact is available with the keys for Product, Customer, Promotion dimensions. The grain for this is Product * Customer * Promotion
Say another fact is available with the keys for Product, Customer. The grain for this is Product * Customer (In fact, I would say it is Product * Customer * Promotion Total).
So in the second case, the grain of the table is changed. So setting appropriate content levels for these sources would automatically switch the sources.
So, I request you to try these settings and let me know if it works.
Thank you,
Dhar

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Issue with Opportunity schema contained in Opportunity.wsdl and Integration

Similar Messages

Maybe you are looking for