Currency translation - based on posting date

Hi everyone..
im again posting this topic bcos im in need of a solution for my problem as early as possible.please excuse me.
Problem related to currency conversion:
Im taking a report from sales order and billing cube,and the report is coming fine,but when i apply the currency conversion type,it is not giving the correct conversion.
In report,im using exchange rate on document posting date.
So if i compare the value in R/3 with the reporting value,the difference comes.
For the currency conversion type i used, i checked in rrc2,it is like this.
Exch rate type:M-standard translation at avg rate
Source curr:from data record
Tgr curr:selection with translation
Time ref:Varoiable time reference:A-To the exact day
Special Infoobj:Posting date object
So what could be the problem for the wrong translation.the difference is about 1.2 rs per dollar.
i will be verymuch thankful to u,if u could give some solution for this problem...
thansk & regards
sudha

Hi
Please check if you are transferring exchange rates maintained in R/3 to BW on daily basis or as & when change happens on R/3 side.
If not then you can do that in RSA1->source systems-> here select your R/3 system ->right mouse click-> Transfer global settings-> in next screen put check box ON for currencies and then using update tables option button. For daily scheduling, go to top menu ->Program-> Excute in background-> here you can schedule this as daily job.
Hope this helps
Regards
Pradip

Similar Messages

Vendor Balance Report Day wise based on Posting date

Hi Guru's,
I am creating vendor balance reprot day wise based on posting date .
In my report i want to show TDS(With hold tax ) amount where can i get that field name how can retrive the data using bsik and bsak .
I Donot want to display reversal documents in the displaying list .How can i remove reversal entries .
Regards
Nandan.

Hi Nandan,
check these tables:
A399
T059O
T059ZT
Regards,
Santosh Kumar M

Month Year values based on Posting Date

In my super huge extra large InfoCube (0CFM_C10) I got a lot of data. I take Posting Date, some KFG and CalMonth/Year. Unfortinally CalMonth/Year duplicates records, if I drop it off the columns/rows I get valid data by Posting Date.
My question is this - is it possible to create some MonthYear Calculated KFG/field/formula or smthng. based on Posting Date? In other words I need Month/Year in rows/ columns or free characteristics...
Edited by: Gediminas Berzanskis on Mar 18, 2008 10:18 AM

Dear,
When canceling a payment which was created in previous posting periods,
we get system message "Date deviates from permissible range",so
the workaround is changing back the posting period to the previous one
and try to cancel the payment.
However,another system message pops up when we try to cancel payment
after changing back the posting period,which is the "creation date" or
"posting date".
In this scenario, you should select the second option from the
cancellation options window, which is the 'Creation date'. I would like
to explain more below.
Posting Date- means the posting date of the cancellation document, it's
not the posting date of the incoming payment that you wanna perform the
cancellation. In your case, selecting this 'posting date' option, system
deems that you want to post this cancellation document on its own
posting date.
Creating Date- means the posting date/creation date of the incoming
payment, it makes sense that the system works fine if you select this
option. If you cancel the incoming payment and check the JE generated,
you will find that the posting date of this cancellation document is
actually recorded as the posting date of the incoming payment.
Wish it helps you.If you have any problems,please kindly let me know.
Thanks and best regards,
Apple

Inventory Report Based On Posting Date

Hai All
Can any one help me with the subject "Inventory Report Based On Posting Date"
Please
with regards
Shankar

hi,
Visit this link,already answered.
Difference between posting & system date in Inventory Audit Report
Jeyakanthan

Currency Conversion---- Based on Posting period

Hi All,
I am creating a report based on FIAA .
Query selection screen will contain COMPANY CODE , and the POSTING PERIOD
suppose we enter company code as 2100 and posting period from 001.2007 to 012.2007.
I need to translate all the balance sheet items are translate with the closing rate (M) for the current period , i.e. the "to period in the report " here 012.2007.
The To period is dynamic and i need to select the currency conversion rate dynamically based on the To period entered in the selection screen of query.so, Can any one give the clues to achieve this. Your help is appriciated.
Thanks & Regards
Syam.
Edited by: syam reddy on Nov 24, 2008 10:09 PM
Edited by: syam reddy on Nov 24, 2008 10:19 PM

Use RSCUR transaction to create currency translation type.
Here under "Time Ref" tab use "Variable Time Ref" and special infoobject.
You should be able to choose Posting period or posting date here.
Now in query designer maintain the currency conversion based on this currency translation type.
Hope this helps.

Currency Translation based on Last Day of the Acquistion month

Dear all,
Request to help me in understanding how we can calculate the currency translation rate as per the last day if the acquistion month..
For Example if the Acquistion date : 01/01/2008 (mm/dd/yyyy) the currency translation should happend based on the rate maintained as on 31/01/2008.
Thanks
Pavan Kumar Prakhya

First, you will need to convert the actual acquisition date to the end date of the Fiscal Period. This can be done by using two separate Function Modules. First, get the actual Fiscal Period by entering the date and Fiscal Year Variant into the DATE_TO_PERIOD_CONVERT Function Module. Use the Fiscal Year and Fiscal Period from this and determine the end date of the Fiscal Period by using Function Module LAST_DAY_IN_PERIOD_GET with Fiscal Year, Fiscal Period and Fiscal Year Variant as your inputs.
For the conversion, use the Function Module CONVERT_TO_LOCAL_CURRENCY. The inputs for this would be the last date of the Fiscal Period, the amount to be converted, the from currency code, the to currency code, blank in rate, AS01 in type of rate and X in read TCURR. This assumes, however, that month-end rates (rate type = AS01) have been loaded into your source system and these rates have been transferred to your BW environment.

View GR report based on posting date

Hi,
Is there any report to view GR on PO by enter posting date?
Because i check ME2M,only can enter delivery date.
Thank you.

Hi,
Check MB51 with 101 movement type and posting date.
Regards,
Bharat

Creating Multiple IDOCs and Line Items based on Posting date from file

Hi All,
My scenario is File to IDOC(MBGMCR01)...
Need your suggestions and help on how to go with this...
Source file structure is
DC61|2009-03-15|000000000001200051|00000005.00|200|0001|1234|
DC61|2009-03-15|000000000001200363|00000001.00|300|0001|1234|
DC61|2009-03-15|000000000001200334|00000002.00|400|0001|1234|
DC61|2009-03-16|000000000001201145|00000001.00|200|0001|1234|
DC61|2009-03-16|000000000001201086|00000002.00|100|0001|1234|
DC61|2009-03-17|000000000001200051|00000003.00|200|0001|1234|
DC61|2009-03-17|000000000001200052|00000003.00|200|0001|1234|
DC61|2009-03-17|000000000001200053|00000003.00|200|0001|1234|
DC61|2009-03-18|000000000001200056|00000003.00|200|0001|1234|
And target IDOC(MBGMCR01) is
IDOC (0u202699999)
E1BP2017_GM_ITEM_CREATE(0u2026999999)
     Date
For Each new Posting date(column 2) of the source a new idoc to be created and the corresponding records of each posting date to be added to E1BP2017_GM_ITEM_CREATE
The out put for the above should be like this
IDOC(2009-03-15)
E1BP2017_GM_ITEM_CREATE=2009-03-15
E1BP2017_GM_ITEM_CREATE=2009-03-15
E1BP2017_GM_ITEM_CREATE=2009-03-15
IDOC(2009-03-16)
E1BP2017_GM_ITEM_CREATE=2009-03-16
E1BP2017_GM_ITEM_CREATE=2009-03-16
IDOC(2009-03-17)
E1BP2017_GM_ITEM_CREATE =2009-03-17
E1BP2017_GM_ITEM_CREATE=2009-03-17
E1BP2017_GM_ITEM_CREATE=2009-03-17
IDOC(2009-03-18)
E1BP2017_GM_ITEM_CREATE=2009-03-18
Will be thank ful if any one gives a hint....
Thanks and regards,
Sridhar

I rather meant a picture of your mapping - anyways. Hope this is correct:
Your souce structure:
<MT_IAR>
<IAR_Recordset>
    <IAR_Details>
      <Inv_adj_date>
    </IAR_Details>
    <IAR_Details>
      <Inv_adj_date>
    </IAR_Details>
Than mapping should be like this:
<Inv_adj_date>        ==> SplitbyValue        ==> IDOC
Please confirm this doesn't work.

FMS for Udf based on Posting Date + 4 weeks and +4 weeks excluding weekends

Hello,
Requirement 1
Have made a udf in the Sales Order Header as Manfacture Drawing Rel Date U_FDRDT in which I want that if a Sales Order posting date is 15/12/2010 then this udf should automatically update with the + 4 weeks date i.e 14/01/2011
Requirement 2
Another UDF is also made as U_FRDWDT in which I want that if the Sales Order posting date is 15/12/2010 then this udf should automatically update + 4 weeks EXCLUDING Fridays and Saturdays which is there in the 4 weeks hence the result should be e.g 27/01/2010 which is excluding Fridays and Saturdays.The requirement is as such that Friday and Saturday are holidays for the company and the client wants to have this field updated on + 4 weeks basis but it should not consider Friday and Saturday as its holiday.
Also note in SAP base setup Holiday Master Weekend is set from Friday to Saturday. Will this help in any way of updating the field or through formated search.
Kindly advise what best solution can be given
Regards,
Soni

Hi,
One question per thread. This is forum rule.
Here is FMS for the 1st one:
SELECT DateAdd(WW,4,$[ORDR.DocDate\])
Please post another for the 2nd.
Thanks,
Gordon

Stock report for a period (based on posting date)

Hi Experts,
We have a requirement as under:
1) We want a report for a period say from 01.04.2011 to 30.09.2011 (closed period for both MM and FI postings). Report is being taken on a later date say 01.12.2011.
2) The report should say the status of stock as of 30.09.2011 only even of being taken in the month of December
3) I tried to take the desired report through MB5B for the period 30.09.2011 to 30.09.2011 (selection date fields) on 20th december, 2011 and noticed that if same report with the same selection criteria is taken at two different times, output data is not the same whereas MM and FI posting periods are already closed.
Can anybody suggest alternative SAP standard report where output will remain the same if report with same selection criteria is taken at different intervals ELSE in case of change we should be able to see the documents posted in between if back dated entries have been posted after opening MM /FI period.
thanks

sure it speaks the same, but it mentions as well the reasons (1) and has much more information (2) and a solution.(3)
1)
user starts transaction MB5B for a very large number of materials or for all materials in a plant
During the runtime of transaction MB5B, goods movements are posted in parallel:
- The results of transaction MB5B are incorrect.
- Each run of transaction MB5B returns different results for the same combination of "material + plant".
Example: Transaction MB5B should process 100 materials with 10,000 MM documents each. The system takes approximately 1 second to read the material master data and it takes approximately 1 hour to read the MM and FI documents. A goods movement for a material to be processed is posted approximately 10 minutes after you start transaction MB5B. The stock for this material before this posting has already been determined. The new MM document is also read, however. The stock read before the posting is used as the basis for calculating the stocks for the start and end date.
Even for an old and closed period, MB5B starts today and calculates backwards any movement to finally get the stock for the time your specified in your selection.
2)
The SAP standard release does not include a solution
so you have to understand that there is no real alternative transaction in SAP
3) and then they provide a large section with a workaround that can be developed by an experienced programmer within 3 to 5 days.
So how shall anyone here be able to tell you an alternative report?
if someone does, then it is an owndeveloped z-report which is not available in your sap system.
if you know that people want lookup period closing stocks at any time in future, then either schedule MB52 at month end and store the list somewhere (and do not allow backposting)
or have an Abaper create a stock report based on the history tables MARDH, MCHBH, MBEWH etc.
And even here you may encounter an issue at some day, if you start archving special stocks or material masters, because then the stock figures from the historic tables are gone and you cannot rebuilt a reliable stock report .

Clearing of foreign currency documents in different posting date

Hi guys:
I have encountered an issue on the foreign exchange clearing.
Example given as below Accruals was made on 31 Aug 2008 (Cr Balance), when the invoice is received on 25 Sept 2008, this transaction will be reversed (Dr Balance). And we need to trigger the clearing/matching process. The document currency of the accruals was SGD, but the invoice comes in GBP. Hence, by right, when the invoice is received on 25 Sept 2008, the system should pick the foreign currency rate on this date - WHICH IS 25 Sept 2008.However, the current practice is it depends on which date we do the matching/clearing. Say, if we clear on 20 Sept 2008, the system will pick the 20 Sept 2008 date currency rate, which gives a realised gain/loss (SGD: 716.80 or USD 500.28).
How to pick up the right currency rate we needed?
Forrest

Any idea on this, i can posting and clearing in t-code F-04, so i can change transaction date related to foreign currency exchange rate, but user insist on using F-03, which i can not find transaction date.
Any useful suggestions, points will be awarded
Forrest

Extracting Movement type wise data(MSEG) based on posting date from 0IC_C03

Hi Experts,
I have implemented 0IC_C03 in devlopment client and preparing a Physical Inventory report.
I want to know if I can directly extract the fugures such as Process Loss, Sales, Sales Return, Transfer In and transfer out from the cube 0IC_C03 so, my question is ...
Is it possible to extract the movement type wise data as in MSEG from any KF of 0IC_C03 ?? If its possible which particular KF should I use from the cube ??
Please respond at the earliest.
Thanks,
Romil

Hi,
You can extract 0RECTOTSTCK & 0ISSTOTSTCK from 0IC_C03 but you need put corresponding Movment type for each
you can't put 0TOTALSTCK, it is Non-cumulative key fig,
even all key fig except Non-Cumulative key Fig like (0TOTALSTCK , 0VALSTCKQTY , 0VALSTCKVAL.....) can be extracted
Best Regards
Obaid

A/r Invoice report query based on posting date selection criteria

Hi experts,
I am trying to write a query to get the A/r invoice report including Docnum, Docdate, cardname, project, linetotal, taxcode, taxtotal.
and i tried the below query
SELECT T0.[DocNum], T0.[DocDate], T0.[CardCode], T0.[CardName],T1.[LineTotal] FROM OINV T0 INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry WHERE T0.[DocDate] >=[%0] AND T0.[DocDate] <=[%1]
In this query ,
1) i am unable to sum up the linetotal( total before tax)
2) also unable to fetch the sum of taxamount.
3) its more important , the above query will me docnum , when i try to open that doc, it opens the 2007 docments. whereas the other details are correct like docdate, amount and all.
example:   from date: 1/04/2011    to date: 28/07/2011
Docnum    Docdate cardname   linetotal.... etc
    2              1/04/11   XYZ              5000
when i click the 2 (docnum) it opens me the 04/04/2007 documents.
how to limit the doc within the periods given?
thanks in advance
Dwarak

Hi Rahul/Gordon,
thanks for your query's .
additionally,   i want this query without the A/r invoices whichever having credit memo as target doc.
and
i have selection criteria as T0.[U_Sec_Category] = '[%2]' and this has 3 values like 1)CIM 2)BIN 3)DMP
among these CIM should be seen only only user1 and BIN & DMP only by user2.
can u plz get me this
thanks,
Dwarak

EBS currency translation not "posting date"

Hello,
We implemented EBS ealier this year. The currency translation date on the FF_5 postings is taking the "document date" and not the "posting date" when determining which currency exchange rate to use. This is only an issue for a couple days at month end when the document date is in the current month, but the posting date is in the prior month.
What do we need to do to change the currency selection back to "posting date". I have never seen SAP use anything but posting date. I have tried reviewing all the configuration of doc type and other set up during EBS implementation and cannot see how we have triggered this date.
Any help appreciated.
Regards,
Morgan

I neglected to mention that we are calling this currency translation through a WAD button using the SET_CURRENCY_TRANSLATION command. I did do a test by applying the currency conversion within query key figure. This seems to work. So it appears the issue is with how the WAD is processing the variable, not the query. When I display the variable in a drop down item within the WAD it does have the default value that I have assigned in user exit.

Currency Translation on Key Date for AR Aging

Need your valuable advice!
I have created an AR Aging query including both Open and Cleared Items based on 0FIAR_C03_Q0005 standard query. However the requirement is to do currency translation to Group Currency (USD) on Key Date. This Key date is defaulted to today but the user can change this to go back in time and pull all the ARs as of that back dated key date.
I was planning to create a currency translation type on M rate based on the Key Date Variable in RSCUR. However I am confused on which variable to base this currency translation. I have several key date variables in my query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date).
Which Key Date Variable should I use in 'Time Reference from Variable' field in RSCUR? Would it be one of the 3 mentioned above or something else and why?
Appreciate your valuable advice.
Thanks,
Al

Hi,
Yes I do want to use the Key date from the variable screen and I am using the standard 0FIAR_C03_Q005 with slight modification including currency translation.
As I mentioned in my original post I have several key date variables in this query such as 0P_KEYD2 (based on Posting Date), 0P_KEYDT (based on Net Due Date) and 0P_KEYD3 (based on Clearing Date). My question is which one should I use if I want to base it on the specific key date variable from the variable screen? I need the specific Key Date variable technical name.
Thanks,
Al

Currency translation - based on posting date

Similar Messages

Maybe you are looking for