Current level?

Is there a way to detect the current level in flash in order
to then add to this, to bring in the next file. I want to load a
new .swf into the next highest available level on top of the latest
.swf which will be at the current highest level.
Cheers!

create an array. every time you instantiate a level, store
that level in the array. every time you unload a level, remove it
from the array. any time you want to know the topmost level, check
the array.

Similar Messages

Formula "At Current Level"

Post Author: mlowrance
CA Forum: Formula
Is there a concept in Crystal to have it calculate a formula "at the current grouping level". In our report we have several formulas that calculate a number of statistics. The report has a sum for the fields at each group level and then uses those sums to calculate the formulas. However since this sum field is different, or at least has a different name at each group level, we have to create a copy of the formula for every level of the report we want it to appear at (Group 1, Group 2, Grand Total,etc.)Is there any way in Crystal to tell a formula to calculate "At the current level". This way we could have one copy of the formula that would just plug inthe total field for the current group it is working in.This obviously is a really pressing issue since we can fix it by just having multiple copies of the formula, however it would be nice to not have to modify each one or create new ones each time the grouping is changed. I hope this made sense, it was the only way I could come up with to explain it.Thanks,matt

Post Author: yangster
CA Forum: Formula
what you've described it not feasible or a way to calculate to begin withthe sum/count/etc at a particular grouping will differ at each group level for the exact reason that you are grouping to begin witheach group level represents a distinct break in the dataif you are using crystal reports xi release 2 you can use the insert summary into all levels to speed things upbut if you are doing a statistical calculation at each level you will need to evaluate it at each group level

Keithley 6220 trying to use "Set Current Level.vi"

Hi,
I am trying to use the "Set Current Level.vi" given by Keithley. But the VI isn't working. When I enter a current level the output stays zero. Only the decimal point and the current range are set correct. I tried to locate the problem, but I am new in LabVIEW and can't find it.
for example, when i enter 10.000mA the output is 00,000mA
Can someone help me please?
thx
andre
Attachments:
Set Current Level.vi ‏31 KB

The problem is you don't understand what you are setting. The 6220 us a current source and so it has no control over how much current an external sink draws. That is a function is the DC characteristics of the external circuitry.
All the 6220 can control is how much current it will allow the circuit to draw before it goes into current limiting. What you are setting is a limit so you won't see a difference unless your circuitry starts bumping up against it.
By the way in general there are two possible responses to an over current condition. The source can crowbar, which means it turns off the output, or it can go into current limiting where is starts dropping the output voltage until the current limit is reached.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Current level on runtime discoverer

Hi,
Can I Know the current level in a specific atribute/hierarqy at runtime in a discoverer crosstab?
Is there any variable or metadata availuble?

Hi,
i have the same problem.
Have you some news about.
Thanks in advance

Abort during hardware write leaves NI 9263 at current level

When an abort is performed on an AO NI 9263 the current level output is kept until the program is completely shut down and then restarted. Is there a way to trap the Abort and do azero level write to the hardware then abort?

No. This is why the abort button should only be used as a last resort.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Segment E1RSHND does not occur at the current level of thecustom basic type

Hello Friends,
This is the error iam getting in RSA1 for Heirarichal orgunit: So data load is failing.
EDI: Syntax error in IDoc (segment cannot be identified)
Message no. E0078
Diagnosis
The segment E1RSHND does not occur at the current level of the basic type ZSPB007 (extension ).
This error can have several reasons:
The segment E1RSHND is assigned to a group whose header segment does not occur.
The segment E1RSHND does not exist in the syntax description of the basic type ZSPB007 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type ZSPB007 (extension ).

Hi Sonal ,
i reprocessed the Idoc in BD87 and now the status is 51. Error message in RSA1 is as follows
Function module not allowed: RSAR_DATA_RECEIVED
Message no. B1252
Diagnosis
The function module RSAR_DATA_RECEIVED and the application object type which were determined are not valid for this IDoc.
Procedure
1. Please check that the process code in the inbound partner profile is correct.
2. If this is the case, you should check the ALE inbound methods ALE inbound methods for the process code and see whether the specified function module and application object type are correct.
3. If this is also the case, then the function module and the application object type are not permitted for the logical message type, message variant, message function and basis type that are contained in the IDoc control record. You should check whether the correct values have been assigned to these fields in the control record. If they do have the correct values, then the assignment to the function module and the application object type needs to be maintained.

Problem Upgrading Kernel to he Current Level for ECC 6 V5R4M0 OS/400

Hello,
I am having problem upgrading my ECC 6.0 kernel to the current level (236), the steps I have done is
1) downloaded and copied following kernel fix to tmp folder under rootbin.
APYR3FIX.SAR,APYSAP.SAR,LODSAPKRN.SAR
2) Apply the above fix using following command
- APYR3FIX SID(SID) SAVF(R3FIX700U/APYR3FIX) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
- APYR3FIX SID(SID) SAVF(R3FIX700U/APYSAP) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
- APYR3FIX SID(SID) SAVF(R3FIX700U/LODSAPKRN) SAVLIB(GEN700UOPT) KRNLIB(SAPSIDUC)
Started applying new kernel
1) Copy sapexe.sar and sapexedb.sar into tmp folder i.e kern under rootbin.
2) created one file using notepad called parts ( w/o extension)
parts file having following content.
SAPEXE.SAR,
SAPEXEDB.SAR,
3) copied parts file into tmp folder.
4) Create new kernel library like SAPSIDUKRN using following command.
- CRTLIB LIB(SAPSIDUKRN)
5) Apply latest kernel to newly created kernel library using following command.
- LODSAPKRN DEV(STMF) MNTPNT('/tmp') KRNLIB(SAPSIDUKRN) USERDEF(YES) LIST('/tmp/parts')
When i run the command it says successfully completed, but no files are present in the newly created kernel. please guide me on how to proceed with this.
Thank You

Hi Vijay,
From reading your description I wonder if you simply mixed up directory names. In step 1) of the kernel load you mentioned directory kernel below rootbin. In the command you reference directory /tmp. Although LODSAPKRN should complain if any of the given objects is missing it might worth checking.
However, did you recognize there is a new option USERDEF(FLAT) available with the latest version (246) of LODSAKRN? This option is supposed to allow standard SAPEXE+SAPEXEDB packages being imported without having to provide the parts file. Check note 912575 if you are interested - english version should be getting updated today.
Regards,
Thomas

CFP-AO-200 only puts out max current level 4.3mA

cFP-AO-200 only puts out max current level 4.3mA using fieldpoint explorer. The load is 350 ohms resistor.
Brad Whaley
LabVIEW Certified Engineer

What is the voltage level of the external power supply you are using? The FP-AO-200 and cFP-AO-200 output load drive capability is based upon the voltage of the external supply that you are using. They each have an internal 3 volt drop. You can use V=I*R to determine the load drive capability. For example, with a 5 volt external supply, you have the 3 volt drop, so 2 Volts/ 21 mA = 95 Ohm load maximum. With a 24 V supply, you can drive the maximum rated load of 1000 Ohms. For a 350 Ohm load, you will need a minimum of a 10.5 Volt supply.
Regards,
Aaron

Display directory in current level only in application server

Hi, I am trying to display the subdirectory in application server underneath the current directory for 1 level only. I am using the function module /SAPDMC/LSM_F4_SERVER_FILE but it will display till the last level. Is there a way to only display the directory (not include file) underneath the current directory but not to go any further down? Or if there is a way to restrict the number of level for going downward, that will work too.
Thanks,

Hi,
Not sure to what extent this is correct. But seems to be working for me.
Pass the parameter FILEMASK as *.xxx (Usually we don't have the files with extension xxx. So it displays only till the directory level.
Hope this works for you.
Thanks,
Vinod.

In Firefox 3, I was able to import and export to an HTML my bookmarks. This either does not exist any more or is well hidden. Your support answer is not up to date with your current level.

Organize bookmarks no longer exists on Firefox 4. I have been to your support page "Exporting bookmarks to an HTML file" and this level of Firefox is in 3 and below. Can you help me be able to transport my bookmarks from Firefox to Firefox on different machines.

Go to Bookmarks menu--> Show All Bookmarks ( Ctrl + Shift + B ) --> Import and Backup --> Export HTML

What would you think if SCN hides points and displays only your badges and current level?

Hi
After recent change or improvement I must say, in SCN gamification and points system I just came up with an idea that what if SCN hides points completely and calculate and maintain them just they way they are being calculated now?
With this you'll be able to see reputation of users just with their badges (Answer Hero, Story Teller, Thought Leader etc) and their levels (Diamond, Gold, Topaz etc). Would you like that reputation system or this one with points showing with every name.? Please share your thoughts and views.
Thank$

Hi JP
Thank you for being part of this discussion and sharing your views. As you can see there are users with different opinions and its good that we have multiple thoughts on it.
When I post a question and get responses from users and if I like someone's response I always visit his profile and see his badges/level/points and area of expertise. It gives me an idea about his potential and increases my trust level. There are many users who sometimes give foolish suggestions without knowing anything. Some users respond just for the sake of points and they give irrelevant answers. If we see badges and points it gives us or at least me a trust level on poster. This is the reason that reputation system is mandatory for this type of forums.
It doesn't mean newbies can't post good and valuable posts. There can be a newbie who has tons of knowledge and years of experience but he is new in SCN. Exceptions are always there but if we see as a whole you must be agreed that newbies post basic or sometimes irrelevant posts mostly.
As you said points give us a barometer and sometimes this barometer can be misused specially when you are near to get some next level. You must have seen in car racings that driver boosts up speed to his maximum in last lap of race. When a user sees he needs just 300/400 points to reach next level (Topaz/Emerald) etc he can use tricks to get points. If we have only levels and badges and points are being calculating at background users will be contributing positively without curse of points.
This is what I believe in.
Thank$

Firefox tells me to update to 10.0.1, but also tells me my AVG security won't work with update. What do I do for security? I'd skip update, but I already have hang problems, which always seems to happen if I don't update to current level.

I want to update, but not lose the security I have and like.
A catch-22 here: Update to avoid hang-time problems and loose my security that I'm comfortable with OR keep my AVG security and put up with "Mozilla not responding" hang time frustration.

The only item you'll lose is AVG Safe Search" which is incompatible with FF 10. All other functions of AVG are still valid and your computer is still protected. I have disabled AVG Safe Search for a long time now and have no problem whatsoever. You just have to be careful with what links do you click when you are on line. I don't know if AVG is going to fix this problem anytime soon since FF 10 has been out for a while and nothing has been done by AVG yet.

HT2685 need help updating 4.2.1 Ipad to most current level from pc?

i have transfered pictures. not sure how to transfer purchased apps. would like to update 4.2.1 ipad with pc

Click here and follow the instructions.
(96406)

How do I pay for current level service expiring in Sept.?

My .mac account was converted to iCloud with 50gb of storage until Sept. 2012. Where do I go to pay for the upgrade before it expires. Can't seem to get there from icloud or my Apple account.

It will renew automatically provided the credit card information you have in your Account in the iTunes Store is up to date.

How can I recover my game after I restored my iPad? The game was online so I thought it won't be affected even if I restore my ipad. After restoring, and downloading my game, it started to level 1. Please help. I've been playing that game for about a year

My game was 'fashion story' and currently level 90. But after I restored my iPad, it went back to level 1. Please please help

Do you have a backup of the device before you restored it? If you have a backup, try to restore the device from that backup.
If you don't, I doubt that there's anything anyone here can do for you. Seems as though your save game, (despite being an "online" game) was wiped out with the restore. I'd say the vast majority of online games still do keep your save data on the device and NOT in "the cloud".
In this case, a backup of the device would have helped you out...it's always wise to backup your device before proceeding with a restore, especially if you plan to restore the device as new.

Current level?

Similar Messages

Maybe you are looking for