Current view value for time

I have a EVDRE report which is running fine if I put month or quarter in the CV, but if I put year such as 2011.TOTAL, if will not retrieve any value, the time dimension is not in the row or col. anybody have any thought?

Hi Jianbai,
If you have recently implented EHP1 there is a known issue with hierarchies not aggregating
Refer to OSS note 1139396
Report SAP_DROP_TMPTABLES can be executed to drop temporary hierarchy tables.
Regards,
Sabine

Similar Messages

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

How to get the current month value for a customer exit variable?

How to get the current month value for a customer exit variable?
And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
Thanks!

Hi Kevin,
Check here........
Re: Customer Exist for "From Current Date To Month End"
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
Cal month
Regards,
Vijay.

Multiple values for Time Characteristics (Ex: 0CALMONTH) in planning layout

Hello,
We are on BW - BPS 3.5v
We have a realtime infocube with only time characteristic 0CALMONTH.
There is a requirement that in my Planning layout I have to display the Keyfigures for:
(CURRENT MONTH) (CUMULATIVE 4 MONTHS FROM CURRENT MONTH) (CUMULATIVE 7 MONTHS FROM CUR MONTH)
I defined 3 exit variables on 0CALMONTH , one for Current Month, one for All 4 months from Current Month and another for All 7 months from Current Month.
In my planning layout when I use these variables for 0CALMONTH, I don't get the values for 4 months & 7 months.
I checked the variables are being populated with correct values. But when they get passed to the layout it doesn't read the Cube.
I got the basic doubt if we can give multiple values for the time characteristics in planning layout..??
Thanks for any suggestions.
Vish

Hi.
Did you created 3 restricted KF: one with KF amount and variable current month, second with amount and variable 4 monthes, third with amount and variable 7 monthes ?
Did you have match records in you cube ?
Regards.

Current best practice for Time service settings for Hyper-V 2012 R2 Host and guest OS's

I am trying to find out what the current best practice is for Time service settings in a Hyper-V 2012 environment. I find conflicting information. Can anyone point me in the right direction. I have found some different sources (links below) but again the
are not consistent. Thanks
http://blogs.msdn.com/b/virtual_pc_guy/archive/2010/11/19/time-synchronization-in-hyper-v.aspx
http://technet.microsoft.com/en-us/library/virtual_active_directory_domain_controller_virtualization_hyperv(v=ws.10).aspx
http://social.technet.microsoft.com/wiki/contents/articles/12709.time-services-for-a-domain-controller-on-hyper-v.aspx

From the first link provided by Brian, it does state that the time service should be off, but then the update changes that statement. Still best to rely on the first link in the OP - it was written by the guy that has been responsible for much of what
gets coded into Hyper-V, starting from before there ever was a Hyper-V. I'd say that's a pretty reliable source.
Time service
For virtual machines that are configured as domain controllers, it is recommended that you disable time synchronization between the host system and guest operating system acting as a domain controller. This enables your guest domain controller to synchronize
time from the domain hierarchy.
To disable the Hyper-V time synchronization provider, shut down the VM and clear the Time synchronization check box under Integration Services.
Note
This guidance has been recently updated to reflect the current recommendation to synchronize time for the guest domain controller from only the domain hierarchy, rather than the previous recommendation to partially disable time synchronization between the
host system and guest domain controller.
. : | : . : | : . tim

F4 Values for Time Characteristics

Hello,
in F4 on the variable screen of queries for Time Characteristics (like 0CALMONTH) I get all kinds of nonsense entries like: 07.004 or 06.0420
Since I want to get only F4 entries booked in the InfoProvider ... where can I make this setting?
The query is based on an ODS.
Thanks for your help,
Angelika

Hi try it in InfoObject level.
<b>See the followin link
Reporting question
Dbl click on InfoObject and open Business Explorar tab and there you can find
Query Def. Filter Value Selection
Query Execution Filter Val. Selection,
here you can et the filter.
Thanks
Reddy
Message was edited by:
Reddy

Difficulty with Format Value for Time Format

I have a vi where the current time is split out of an Analog waveform (using Get Waveform Components), and subtracted from a starting time, to result in a relative time since the test began. This may not be the most elegant way of doing it, but it works great. The problem is that when I try to convert the elapsed time in seconds back to a time format for saving to a spreadsheet, I get the results shown by the probes. In case the screen capture is not clear enough, the format string is %<%H:%M:%S>t. A colleague has tried this format and it works great. He's running 8.2, and I'm running 7.1. Other than that, our applications appear identical. Any ideas?
Attachments:
Screen Capture2 of Time Format for HTV.png ‏17 KB

I'm also on 8.2 and it works fine for me. Maybe format value couldn't handle time format codes in 7.1. I'm not really sure and I don't have it installed to check. Why don't you use "Format into String" instead? It will work the same way, and should work fine with 7.1.

How do i change so that the HDD currently being used for Time machine becomes the startup disk?

Hi there,
I bought this mac with 2 HDD's (a 250gb and a 2tb). When I booted up the mac for the first time, I accidently chose the 2tb HDD as the time machine.......thing so this makes the 250gb HDD the startup drive. This is useless for me as I only want the documents to be backed up so I want the 250gb drive to be the time machine and the 2tb to be the startup drive.
I've tried opening the Mac OS X installer and it doesn't allow me to set the start up drive to the 2tb drive as it isbeing used for the time machine and i've already turned it off within the system preferences.
Please tell me it's possible to switch them around other-wise this will just be a wasted purchase completely. I already accept the fact that I may have to wipe the drive and re-install everything as well as the documents etc but as long as I get some sort of solution that will allow me to do this.
Can someone please help me with this!
Regards
Eric Wade

Copy off everything you want, restart from the iMac's original disk, choose Disk Utility from the Utilities menu, wipe drives as desired, and then install the OS.
(58930)

How do I set an Apex mulri-row reports form value for the specifc current row using Javascript?

I have a multi-row region based on a table in which I have two particular columns of interest. The first has an LOV defined for which I have set up a pick-list of codes associated with the item's status as "OK" or having some problem, for which there are a small number of set codes associated. Most rows will be OK, but when there is a problem, the pick-list will be used.
When that pick list has been used, there is an optional "comments" column that can be filled in. I want my screen to dynamically enable/disable a pushbutton that links to the comment based on the code. This being row-based, the push-button needs enabling or disabling by row, not as a whole "conditional column". That bit is ok, I think, but I don't know and can't find the syntax for how within the javascript onchange function I set the current row value for a different column to the one that triggered it.
My header function (that doesn't work) is going to be something like this (where the status column LOV having a value = 6 means "OK"). Note I'm using alert for a debug mechamism. The $s line is my failed attempt to set he column value, here with a hard-coded string "Changed COMMENTS":
<script type="text/javascript">
function doActivateButton(object)
if(parseInt(object.value)!='6')
    alert('It is not 6!');
    $s('#COMMENTS','Changed COMMENTS','Changed COMMENTS',TRUE);
else
    alert('It is 6, you know!');
</script>
Ideally, I want any existing comments blanked if the user picks "OK" (6) as the new status, whereas for debug above I'm setting the hardcoded debug string. You will probably also note I realise I haven't properly understood the purpose of the third parameter in the $s API.
(This is a reports region, by the way. A detail block, in forms-speak, with a header block above it.)
Thanks for any assistance.
Mark

Sorry, versions are: Apex 4.1 on Oracle RDBMS 11.2.

How to use the current view in script logic - %DIMENSIONNAME_SET% not work

Hello,
I have the requirement to use the values from the current view in the script logic. User would like to use the members which were selected from the current view in the calculation.
We are using SAP BPC 7.0 SP06
I have prepared the following scrpit:
*XDIM_MEMBERSET TIME=$YEARS001$.NA
*XDIM_MEMBERSET ACCOUNT=BAS(PLVEH_EXP)
*SELECT(%CBU%,ID,BUSINESSAREA,[ID]='%BUSINESSAREA_SET%'")
*SELECT(%CIO%,ID,INTERNALORDER,[ID]='%INTERNALORDER_SET%'")
*RUNALLOCATION
*FACTOR=USING
*DIM BUSINESSAREA WHAT=BANA;WHERE=%CBU%;USING=<<<
*DIM INTERNALORDER WHAT=IONA;WHERE=%CIO%;USING=<<<
*DIM INDICATORS WHAT=INVEHPRI;WHERE=INPXQ;USING=INVEHQUA
*ENDALLOCATION
I have read in the sdn that it is possible to get the current values using %DIMENSIONNAME_SET% variable and use it but it returns all the members that were selected in the datapackage.
I would like to know if there is any special consideration regarging the use of variable or if there is another way to solve it.
Thanks in advance.

Hi,
If you want the code to be executed for the current view selected, you can place the code in Default logic which executes the logic for what ever current view values you send the data through Input schedule.
The key word you have mentined is for script running through Data Manager which gets the value selected through user promt.
Hope this helps,
Regards,
G.Vijaya Kumar.

BUSINESS PROCESS FLOW (BPF) TASK SETUP - CURRENT VIEW OPTIONS

This article explains a few findings regarding the options on Current View Type for setting up Business Process Flow tasks and will discuss BPC for Excel, Data Manager and BPC Web tasks.
Future posts will cover more tasks.
This is valid for 5.x versions only.
IMPORTANT NOTE:
DATA MANAGER PACKAGES
    Data Manager Packages tasks such as Run Specific Package, Run User Package are not integrated
    with the Current View Type selection. Therefore, the options Inherit from Data Region, Inherit from
    Current View or Member Lookup does not work on Data Manager Packages. This is due to the diversity of Data Manager Packages, such as Import, Export, Clear, Default Formulas, each of them requiring a complete different set of parameters, some of them not related to the Current View.
1. INHERIT FROM DATA REGION
Once you choose to Open a BPF from BPC for Excel, you are prompted to choose the Data
Region. Upon setting the desired Data Region, the Current View is changed
accordingly on BPC Web.
    OPEN TEMPLATE / REPORT LIBRARY / SCHEDULE LIBRARY
    If a step is defined as Open Template/Report Library/Schedule Library
    and INHERIT FROM DATA REGION is set to one (or more) of the Data Region
    dimensions, the Current View on BPC for Excel should change to match
    the settings done Data Region settings, being the same as the one on BPC Web.
    SET WORK STATUS
    Same as above.
2. INHERIT FROM CURRENT VIEW
    OPEN TEMPLATE / REPORT LIBRARY / SCHEDULE LIBRARY
    If a step is defined as Open Template/Report Library/Schedule Library and INHERIT FROM
    CURRENT VIEW is set to one (or more) dimensions, the report will pickup the Current View
    from BPC Web and BPC for Excel should change to match the Current View,
    being the same as the one on BPC Web.
    Example:
    1. Log on to BPC Admin on ApShell -> Manage Application Sets;
    2. Go to Business Process Flows -> Budgeting Process;
    3. Grant access to the BPF to your test user;
    4. Check Sub-Step 1 of Step 1 - Check Budget Data. This steps has a
       INHERIT FROM CURRENT VIEW setup (ENTITY).
    5. Log on to BPC Web on ApShell;
    6. Go to Open a Business Process Flow and choose Budgeting Process;
    7. Choose the desired Data Region;
    8. On BPC Web, verify the value setup for ENTITY on the Current View;
    9. Open the Check Budget Data;
    10. The ENTITY on the Current View will be set up accordingly to what
        was set on BPC Web.
    SET WORK STATUS
    Same as above.
3. MEMBER LOOKUP
    OPEN TEMPLATE / REPORT LIBRARY / SCHEDULE LIBRARY
    If a step is defined as Open Template/Report Library/Schedule Library and MEMBER LOOKUP
    is set to one (or more) dimensions, the report will set the Current View
    on BPC for Excel to the member that was configured.
    Example:
    1. Log on to BPC Admin on ApShell -> Manage Application Sets;
    2. Go to Business Process Flows -> Budgeting Process;
    3. Grant access to the BPF to your test user;
    4. Check Sub-Step 1 of Step 1 - Check Budget Data. This steps has a
       MEMBER LOOKUP setup (CATEGORY).
    5. Log on to BPC Web on ApShell;
    6. Go to Open a Business Process Flow and choose Budgeting Process;
    7. Choose the desired Data Region;
    8. On BPC Web, verify the value setup for CATEGORY on the Current View;
    9. Open the Check Budget Data;
    10. The CATEGORY on the Current View will be set up accordingly to what
        was set on the Task configuration, in other words, there should be BUDGET set
        on the Current View.
    SET WORK STATUS
    Same as above.
REFERENCES
This is an unofficial addendum for the SAP BPC 5.1 ADMINISTRATION USER'S GUIDE on:
PAGE 54 - Managing Business Process Flows
PAGE 57 - Adding new business process flows -> To add a step -> Select the current view type
SAP BPC 5.1 ADMINISTRATION USER'S GUIDE can be found on [BPC Instalation Guides and User Guides|http://service.sap.com/instguidescpm-bpc].
Edited by: Gustavo Bortoloti on Dec 15, 2008 6:48 PM

Hi Gustavo Bortoloti,
That's right, the SAP BPC version 5.x SP x not have the specific setting.
Thanks,
Wandi Sutandi

Can I partition my external hard drive so that one partition is for Time Machine and the other is to install Windows with Boot Camp?

I have a Seagate FreeAgent GoFlex 1TB USB 3.0 external hard drive that I currently use just for Time Machine backups. Is it possible for me to go into Disk Utility and create a new partition on the drive so that I may install Windows 7 via Boot Camp? Or since I am already using it for Time Machine do I have to keep it only for Time Machine?

You must install Boot Camp in your internal drive because Windows can't be installed in an external disk and Boot Camp can't do that

How to get current viewed task

For an external synchronization requirement I need to maintain or be able to retrieve the current viewed task by a user. I'm hopeful that this has been solved before. Does anyone have any insight there? I'm considering setting up a table to maintain the current viewed taskid for the user, but even that is proving challenging with my lack of ADF exposure. I see the 'TaskSelectedEvent' in the wizard generated task form I'm using but I'm not sure how I might leverage that.
Any help is appreciated.

Yes. there is no API to get the current task.
Try this:
WDProtocolAdapter.getProtocolAdapter().getRequestObject().getParameter("wi_id");
But i still say a bit confused with your requirement.
The task id gets created only upon creation of a task. And you want this current task id in the BPM Process context? How is it possible unless and until some action takes place and the data is passed from WDJ to BPM Context?
Please clear my doubt.

Issue in getting current row value using getCurrent Value

Issue:When I call ththe method executeSearchVO from controller class
with Row row = personalActionSearchVO.first();
I am getting the corresponding value.
but my requirement is I have multiple record , If i press action on any of the record, I need to read SITName value for the particular record and need to pass it as parameter to other pager(i mean If i select any record, I need to get corresponding value in the attribute for the record.)
if i comment personalActionSearchVO.first(); i am getting null pointer exception.
Pl. helpme how to get current row instead of first row always.
AMIMPL Clause
public void executeSearchVO(String loginPersonId)
XXHRPersonalActionSearchVOImpl personalActionSearchVO =getXXHRPersonalActionSearchVO1();
personalActionSearchVO.initQuery(loginPersonId);
// Row row = personalActionSearchVO.first();
row = personalActionSearchVO.getFirstFilteredRow("action","1");
Row masterRow = row;
personalActionSearchVO.setCurrentRow(masterRow);
OARow Row1 = (OARow)personalActionSearchVO.getCurrentRow();
System.out.println("Org "+Row1.getAttribute("Organization"));
calling this method from controller clause
if("action".equals(pageContext.getParameter(EVENT_PARAM)) )
System.out.println("Person Id "+ pageContext.getParameter("XXHRPersonId"));
Serializable methodParams[] = {pageContext.getEmployeeId()+""};
applicationModule.invokeMethod("executeSearchVO",methodParams);
need it urgently. pl. help
thanks
siva

Timo,
I am new to Jdevloper. I will explain the issue in detail.
Version: Oracle 9i Jdeveloper
I have a query page with multiple records. when I perform action , I need to pass 2 parameters from query screen to my actual page.
1 parameter is Login person Id,. Now the issue is with getting current value for 2nd paramenter. 2nd Parameter will be changed depends upon record i am choosing in my query page: column is : Information Name.
when I use getcurrentrow , I am getting null pointer exception.
My controller class when I click action button :
if("action".equals(pageContext.getParameter(EVENT_PARAM)) )
Serializable methodParams[] = {pageContext.getEmployeeId()+""};
applicationModule.invokeMethod("executeSearchVO1",methodParams);
{color:#993300}
// Here I need to get InformationName value based on the record I am choosing{color}
HashMap hashMap = new HashMap(2);
hashMap.put("XXHRPersonId", pageContext.getParameter("XXHRPersonId"));
// hashMap.put("InformationName", methodParams);
pageContext.forwardImmediately(
"OA.jsp?page=/xxhr/oracle/apps/xxhr/selfservice/personalaction/webui/XXHRPersonalActionPG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hashMap,
true, // Retain AM
OAWebBeanConstants.ADD_BREAD_CRUMB_NO
my AMIMPL Clause :
I am just pasting whatever I have tried. Pl. suggest me If my code is wrong.
*{color:#993300}I need to get current row information value from the below method*
*{color}*
public void executeSearchVO1(String loginPersonId)
XXHRPersonalActionSearchVOImpl personalActionSearchVO =getXXHRPersonalActionSearchVO1();
personalActionSearchVO.initQuery(loginPersonId);
System.out.println("Row count "+personalActionSearchVO.getRowCount());
// Row row = personalActionSearchVO.first();
Row row = personalActionSearchVO.getCurrentRow();
System.out.println("Informaton Name "+row.getAttribute("InformationName");
In this , If i initialzie with Row row = personalActionSearchVO.first();I am able to get value for my column Information Name.
whereas, if I use directly Row row = personalActionSearchVO.getCurrentRow();, i am getting null pointer exception.
Pl. let me know how to get current row value for Information Name.
Looking for the reply at the earliest.
Thanks
siva

Screen shots for time mgmt

Hi every one
I am not good in Time Mgmt. mainly I want screen shots for Holiday Calendar, Break Schedule, DWS,PWS, WSR, Variants, Day types and Planed working time. So I am looking for a screen shots. Could you please help me? I would like to practice it over the system by using the screen shots which is already prepared by some body
Can anybody help me. It is very useful for me.
Thanks and regards
Seenu

why do u want screen shots
The following is the config. document of TM.
I think its helpful to u.
 Work Schedules  Personnel Time Management IMG Define Public Holiday Classes
Work Personnel Time Management IMG Group Personnel Subareas for the
Work Personnel Subarea Groupings Schedules Schedule
Personnel Work Schedules  Personnel Time Management IMG Group
Personnel Subareas for theDaily Work ScheduleSubarea Groupings
 Daily Work Schedules  Work Schedules  Personnel Time Management
IMG Define Daily Work Schedules
Work Personnel Time Management IMG Define Period Work Schedules.
Period Work Schedules Schedules
IMG Define Day Day Types  Work Schedules Personnel Time Management Types.
 Day Types  Work Schedules  Personnel Time Management IMG Define Day Types.
Day Work Schedules  Personnel Time Management IMG Define Special Days.Types
Work Personnel Time Management IMG Define Employee Subgroup Work
Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules  Personnel Time Management IMG Define Groupings
for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules  Personnel Time Management IMG Set Work
Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules  Personnel Time Management IMG Generate Work
Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time  Work Schedules  Personnel Time
Management  Default Value for the Work Schedule.
 Personnel Time Management IMG Set Default Value for Time
Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG Define
Personnel Subareas for Substitution Substitutions Administration
Types.
Time Data Recording and Personnel Time Management IMG Set Defaults
for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration  Personnel Time
Management  Group Personnel Subareas for Attendances and Absence
Catalog  Absences.
Time Data Recording and Personnel Time Management IMG Define Absence
Types. Absence Catalog  Absences Administration
IMG  Absences  Time Data Recording and Administration Personnel
Time Management Define Counting Classes for the Period Work Absence
Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting  Absence Catalog  Absences Administration Group
Employee Subgroups for Time Quotas.Absence Counting (New)
IMG  Absences  Time Data Recording and Administration Personnel
Time Management Group Rules for Absence Counting (New)  Absence
Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG Absence Absence Catalog 
Absences Data Recording and Administration Define Rules for Rounding
Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting  Absence Catalog  Absences Administration Define
Counting RulesAbsence Counting (New)
Personnel TimeIMG Absence Catalog Absences  Time Data Recording and
Administration Management  Define Counting Rules  Rules for Absence
Counting (New)  Absence Counting  Deduction rules for Absence quotas
Time Personnel Time Management IMG Absence Absence Catalog 
Absences Data Recording and Administration Assign Counting Rules to
Absence Types.Counting
Personnel TimeIMG Attendances/Actual Working Time Data Recording and
Administration Management Define Attendance Types.Times
Time Personnel Time Management IMG  Attendances/Actual Working
Times Data Recording and Administration Assign Counting Rules for
Attendance counting (New) Attendance counting Rules to Attendance
Types.
Time Data Personnel Time Management IMG Managing Time Accounts Using
Attendance/AbsenceRecording and Administration Define Absence Quota
Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration
Time Management  Calculating Absence Entitlements Accounts Using
Attendance/Absence Quotas Permit Quota Generation Without
TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation  Personnel Time Management IMG Set Personnel
Subarea Groupings for Time Recording.Evaluation Settings
PersIMG  Time Data Recording and Administration onnel Time
Management Calculating AbsenceManaging Time Accounts Using
Attendance/Absence Quotas  Set Base Entitlements  Rules for
Generating Absence Quotas Entitlements Base Entitlement for Absence
Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and
Administration Management Rules for Calculating Absence Entitlements
Using Attendance/Absence Quotas Determine Validity and Deduction
Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration  Personnel Time
Management  Calculating Absence EntitlementsTime Accounts Using
Attendance/Absence Quotas Define Set Base Entitlements  Rules for
Generating Absence Quotas  Generation Rules for Quota Selection.
Define Public Holiday Work Schedules  Personnel Time Management IMG Classes
Personnel Work Schedules  Personnel Time Management IMG Group
Personnel Subareas for the Work ScheduleSubarea Groupings
IMG Group Personnel Subarea Groupings  Work Schedules Personnel
Time Management Personnel Subareas for theDaily Work Schedule
 Daily Work Schedules  Work Schedules  Personnel Time Management
IMG Define Daily Work Schedules
Work Personnel Time Management IMG Define Period Work Schedules.
Period Work Schedules Schedules
IMG Define Day Day Types  Work Schedules Personnel Time Management Types.
 Day Types  Work Schedules  Personnel Time Management IMG Define Day Types.
Day Work Schedules  Personnel Time Management IMG Define Special Days.Types
Work Personnel Time Management IMG Define Employee Subgroup Work
Schedule Rules and Work Schedules Schedules Groupings
Work Work Schedules  Personnel Time Management IMG Define Groupings
for the Public HolidaySchedule Rules and Work Schedules Calendar.
Work Work Schedules  Personnel Time Management IMG Set Work
Schedule Rules and WorkSchedule Rules and Work Schedules Schedules.
Work Work Schedules  Personnel Time Management IMG Generate Work
Schedules ManuallySchedule Rules and Work Schedules
IMG Set Planned Working Time  Work Schedules  Personnel Time
Management  Default Value for the Work Schedule.
 Personnel Time Management IMG Set Default Value for Time
Management Planned Working Time Work Schedules Status.
Time Data Recording and Personnel Time Management IMG Define
Personnel Subareas for Substitution Substitutions Administration
Types.
Time Data Recording and Personnel Time Management IMG Set Defaults
for Substitution Types. Substitutions Administration
IMG Absences Time Data Recording and Administration  Personnel Time
Management  Group Personnel Subareas for Attendances and Absence
Catalog  Absences.
Time Data Recording and Personnel Time Management IMG Define Absence
Types. Absence Catalog  Absences Administration
IMG  Absences  Time Data Recording and Administration Personnel
Time Management Define Counting Classes for the Period Work Absence
Counting Absence Catalog Schedule.
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting  Absence Catalog  Absences Administration Group
Employee Subgroups for Time Quotas.Absence Counting (New)
IMG  Absences  Time Data Recording and Administration Personnel
Time Management Group Rules for Absence Counting (New)  Absence
Counting Absence Catalog Personnel Subareas for Time Quotas
Time Personnel Time Management IMG Absence Absence Catalog 
Absences Data Recording and Administration Define Rules for Rounding
Counted Rules for Absence Counting (New) Counting Absences
Time Data Recording and Personnel Time Management IMG Rules for
Absence Counting  Absence Catalog  Absences Administration Define
Counting RulesAbsence Counting (New)
Personnel TimeIMG Absence Catalog Absences  Time Data Recording and
Administration Management  Define Counting Rules  Rules for Absence
Counting (New)  Absence Counting  Deduction rules for Absence quotas
Time Personnel Time Management IMG Absence Absence Catalog 
Absences Data Recording and Administration Assign Counting Rules to
Absence Types.Counting
Personnel TimeIMG Attendances/Actual Working Time Data Recording and
Administration Management Define Attendance Types.Times
Time Personnel Time Management IMG  Attendances/Actual Working
Times Data Recording and Administration Assign Counting Rules for
Attendance counting (New) Attendance counting Rules to Attendance
Types.
Time Data Personnel Time Management IMG Managing Time Accounts Using
Attendance/AbsenceRecording and Administration Define Absence Quota
Types. Time Quota Types Quotas
PersonnelIMG Managing Time Time Data Recording and Administration
Time Management  Calculating Absence Entitlements Accounts Using
Attendance/Absence Quotas Permit Quota Generation Without
TimeAutomatic Accrual of Absence Quotas Evaluation.
Time Time Evaluation  Personnel Time Management IMG Set Personnel
Subarea Groupings for Time Recording.Evaluation Settings
 Time Data Recording and Administration  Personnel Time Management
IMG Managing Calculating AbsenceTime Accounts Using
Attendance/Absence Quotas  Set Base Entitlements  Rules for
Generating Absence Quotas Entitlements Base Entitlement for Absence
Quota Generation.
Personnel TimeIMG Managing Time Accounts Time Data Recording and
Administration Management Rules for Calculating Absence Entitlements
Using Attendance/Absence Quotas Determine Validity and Deduction
Periods.Generating Absence Quotas
IMG Managing Time Data Recording and Administration  Personnel Time
Management  Calculating Absence EntitlementsTime Accounts Using
Attendance/Absence Quotas Define Set Base Entitlements  Rules for
Generating Absence Quotas  Generation Rules for Quota Selection.
Still have doubts defnately i willl do the need ful

Current view value for time

Similar Messages

Maybe you are looking for