Custom built field to be used as lable in pie chart having multiple values

Hi All,
I have a requirement and if someone can throw some light, then I could try the same as I am stuck now.
I have a list of Cities and I have to show the Top 5 Cities and remaining all should be "All Others". I have used Rank and was able to Show Top 5 and combine rest everything into "All Others" through a logic.
e.g:
City                            Sales Rev
Belarus                          1000
Delhi                               2000
Melbourne                      2500
Sydney                          2000
Singapore                      1500
All Others                       4500
Now I have to show this new dimension combined like below and use New_City as Dim and Sales Rev as Measure in a Pie Chart. The Pie chart will be shown on Sales Rev as measure and the New_City which is a combination of a lot of other fields will show them as labels
New_City                                                        Sales Rev
Belaruschar(10)[Qty Sold]                          1000
Delhichar(10)[Qty Sold]                               2000
Melbournechar(10)[Qty Sold]                      2500
Sydneychar(10)[Qty Sold]                          2000
Singaporechar(10)[Qty Sold]                      1500
All Otherschar(10)[Qty Sold]                       4500
This is my requirement and I am stuck at combining City like Belaruschar(10)[Qty Sold] to form New_City because as and when I do this and remove City column from the table it starts throwing multivalue error or in some other style gives me a summation of the entire Sales Rev in each row.
If I can achieve the same in some other approach also, I would highly appreciate the same if someone can share their ideas.
Regards

Greetings,
Normally you can create a variable with a formula depending on the city's that you want to have.
For example using efashion, the following formula would give you two lines:
=If([City]="Miami";[City]Char(10)"1000";"Others")
Result would be something like
Miami
1000 1500
Others 20000
Please note this is only an example and then you can apply your ranking. However bear in mind due to aggregation the Others will be the sum of all the other City which are not included in your condition.
Regards,
Rico.

Similar Messages

Issue in Updating Customer specific fields in WBS using BAPI_BUS2054_CREATE_MULTI

Hi Experts,
I am able to create the WBS element using BAPI_BUS2054_CREATE_MULTI.But the issue is i am not able to update customer specific fields even after passing the fields as per specification in Function module documentation. I have also created an implementation of BADI as per below specification in FM documentation:
Procedure for Filling Standard Enhancements
Before you call the BAPI for each object that is to be created or changed,
for which you want to enter customer-specific table enhancement fields, add a
data record to the container ExtensionIn:
STRUCTURE: Name of the corresponding help structure
VALUEPART1: Key of the object + start of the data part
VALUEPART2-4: If required, the continuation of the data part
VALUPART1 to VALUPART4 are therefore filled consecutively, first with the
keys that identify the table rows and then with the values of the
customer-specific fields. By structuring the container in this way, it is
possible to transfer its content with one MOVE command to the structure of the
BAPI table extension.
Note that when objects are changed, all fields of the enhancements are
overwritten (as opposed to the standard fields, where only those fields for
which the respective update indicator is set are changed). Therefore, even if
you only want to change one field, all the fields that you transfer in
ExtensionIn must be filled.
Checks and Further Processing
Using the methods ...CREATE_EXIT1 or. ...CHANGE_EXIT1 of the BAdI
BAPIEXT_BUS2001, BAPIEXT_BUS2002, and BAPIEXT_BUS2054, you can check the entered
values (and/or carry out other checks).
In the BAdI's second method, you can program that the data transferred to the
BAPI is processed further (if you only want to transfer the fields of the CI
includes, no more action is required here).
But still i am unable to update fields though i am able to create WBS with rest of the fields except custom fields.
I am using attached code to achieve this.Do we need to code anything inside method create_exit1 or create_exit2 implementation for BADI or
Please help on priority

Hi Rahul,
First observation from your code is that i could not find the assignment for the field
GWA_WBS_EXTIN-STRUCTURE. I hope you are not filling this field, that could be one reason for failure. Try to do it and let us know if you still have the problem.
Br..
Dwaraka

F4 help for custom table field - to be used when populating data thru SM30

Hi,
I have a custom table with 5 fields - say A, B, C, D and E. While populating data to the table through SM30, I need to create a F4 help for the field C. A custom function module needs to be used.
I have created a module for the same in the event PROCESS ON VALUE-REQUEST of the function group of the table.
But the F4 for field C depends on the values put in fields A and B.
I am not able to get the values of fields A and B from within the module PROCESS ON VALUE-REQUEST.
Please help me to create the F4 help.

hii,
This is the piece of code i have used in one of my SM30 to get f4. mopdify according to ur need and use.
revert back for further help.
w_dynpread-fieldname = 'ZSITEDCDATA-SITE'.
APPEND w_dynpread TO i_dynpread.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname               = 'SAPLZSITEDCDATA'
      dynumb               = sy-dynnr
      translate_to_upper   = 'X'
    TABLES
      dynpfields           = i_dynpread
    EXCEPTIONS
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      invalid_parameter    = 7
      undefind_error       = 8
      double_conversion    = 9
      stepl_not_found      = 10
      OTHERS               = 11.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE i_dynpread INTO w_dynpread INDEX 1.
IF sy-subrc IS INITIAL.
    SELECT land1 FROM t001w
      INTO TABLE i_site
      WHERE werks EQ w_dynpread-fieldvalue.
    IF i_site[] IS NOT INITIAL.
      DATA: lv_line TYPE i.
      CLEAR lv_line.
      DESCRIBE TABLE i_site LINES lv_line.
      IF lv_line GT 1.
        CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
          EXPORTING
            retfield        = 'ZSITEDCDATA-SITE_COUNTRY'
            dynpprog        = 'SAPLZSITEDCDATA'
            dynpnr          = sy-dynnr
            window_title    = 'Site Country'
            value_org       = 'S'
          TABLES
            value_tab       = i_site[]
            return_tab      = i_return
          EXCEPTIONS
            parameter_error = 1
            no_values_found = 2
            OTHERS          = 3.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          READ TABLE i_return INTO w_return INDEX 1.
          IF sy-subrc IS INITIAL.
            zsitedcdata-site_country = w_return-fieldval.
          ENDIF.
        ENDIF.
Thanks ,
Gaurav

Data Lables in Pie Charts

Can we define data lables within a pie chart in OBIEE answers ? If so appreciate if you could let me know how this can be setup
thanks!

If you want to change the names of a label which comes from an object, you must create a variable and change the values manually using the "where" or "If Then Else"...

Using negative percentages in Pie Charts

I am having a devil of a time creating a visual pie chart based on the data I am getting from my spreadsheet.
Here is what I am trying to do:
I want to see a visual representation of how many calories I have left to consume before I reach my goal for the day. I have created a spreadsheet that tracks daily caloric intake and gives me a total value. This is a numerical value, like 1600 to 2300. I then have a "goal" caloric value, which remains unchanged. This value is 1800.
The pie chart sees these numbers as positives, so when I put them in you can imagine the result would be close to 50% for both sections of the chart. Obviously, I am inputting garbage values that the pie chart is interpreting accurately.
The next logical step I thought of was to take the "goal" caloric value and subtract the actual "caloric intake" value - this way I come up with a balance of the two - positive or negative. I then used this newly created balance value as "calories remaining" and compared it to "caloric intake."
This seems to give me accurate results, except when I get a negative number in calories remaining. For some odd reason, the pie chart sees this negative number as a positive!?!? For example, if I have a -400 calories remaining compared to 2200 consumed, the pie chart would see this as 400 to 2200.
Any ideas??
Thanks in advance!

You have the option, in the Chart Inspector, to format the labels any way you like. You don't have to use Percentage. In fact, you can add text to your labels, like this:
Regards,
Jerry

Using EVDRE to return only records having a value greater than X

in the old reporting wizard you could use MDX statement like "return only those members/data where the value of some account is greater than 100".
Thus allowing you to select for instance those entities that had signinficant sales or the like.
In EVDRE i am looking for a way to do the same but apart from returning the Top n members or suppressing zero's i cannot fnd a way to do this. From an earlier post in the old outlooksoft consultancy forum (dating from march last year) i understood that this functionality was already prepared so i assumed it is in, but how ???? (if it is there of course).
I hope some of you have the answer.....
Thanks,
Edwin van Geel (SAP Netherlands)

Maggie, I think what David's answer implies is this:
You can't (now, 5.1) use EVDRE to do a suppression based on signeddata.
You can either build your entire report with EVENEs for the expansion, and EVGETs for the data retrieval (basically use the wizard templates) or use an EVENE for the expansion and EVDRE to only retrieve the data. The second option's a bit more complicated to set up, but likely the better approach in terms of performance and future-proofing.
Either way, in the EVENE you use the MDX filter, both to evaluate the data values, and the other filter requirement you have.

Use of makit chart for multiple values against month

Hi all,
here is my test data:
var testDate = { mycollection : [ {Consumption : 200, Consumption1 : 170, ReadingDateTime: February},
                                 {Consumption : 300, Consumption1 : 170, ReadingDateTime: March},
                                 {Consumption : 200, Consumption1 : 130, ReadingDateTime: April},
                                 {Consumption : 200, Consumption1 : 230, ReadingDateTime: May},
                                 {Consumption : 200, Consumption1 : 270, ReadingDateTime: June},
                                 {Consumption : 200, Consumption1 : 200, ReadingDateTime: July},
In this consumption is for present year and consumption 1 is for previous year.
I want to implement both the values against the month using makit column charts:
var oChartj = new sap.makit.Chart({
     height: "80%",
     width: "100%",
     showRangeSelector :false,
     primaryColorPalette:["#18458D"],
     category : new sap.makit.Category({ column : "month" }),
     values : [new sap.makit.Value({ expression : "consumption"})]
     var jsonModel = new sap.ui.model.json.JSONModel();
      jsonModel.setData(testData);
       oChartj.addColumn(new sap.makit.Column({name:"month", value:"{ReadingDateTime}"}));
      oChartj.addColumn(new sap.makit.Column({name:"consumption", value:"{Consumption}"}));
     oChartj.setModel(jsonModel);
       oChartj.bindRows("/mycollection");
in this way i am able to print the data as consumption against month, I need to add consumption1 also.
How to do this?
Regards,
Arun

Hi All,
I was able to do the same with the help of series property in makit charts.
series : new sap.makit.Series({ column : "year" }),
In our test data we need to create the data's based on this value, for example if we are plotting consumption against month then the year should be a differentiating quantity within the test data.
So that the graph will iterate for that and plot two values for the same month.
Regards,
Arun

MS Project 2010 customizing duration field in hours

I have a problem:
My Schedule are defined in days (duration). This is ok, but I want for me a 2nd column with the duration calculated in hours. Is it possible?

SeemaHoleyavar --
You would need to create a custom field containing a formula to do the necessary calculation. If it were me, I would use a custom Text field and rename it as something like Duration in Hours. In that custom Text field, I would use the following
formula:
([Duration])/60 & "h"
Also, when you create the custom Text field, be sure to select the Use Formula option in the Calculation for Task and Group Summary Rows section of the Custom Fields dialog. Keep in mind that the preceding formula assumes an 8-hour working day.
Hope this helps.
Dale A. Howard [MVP]

Axis Field filter only appearing in Legend of Pivot Chart

I was referred here after posting the following on the Office Excel user forum (answers.microsoft.com) I hope I provide all you need, but of course I can provide further details if needed. I am on Windows 7 using Excel 2010.
Okay here goes! (thanks in advance for any direction you can provide)
I was creating a PivotChart where I wanted to be able to filter the chart based on the fields I dropped into the "Axis Fields (Categories)" areas section of my PivotTable. This was working fine until I added the filters as slicers, decided
I didn't like them, and deleted them. Now when I try to view the filter boxes, they will only appear as part of the legend. I do not want to show the legend as it has too many values. I would like to revert to the original behavior of showing the Axis Field
Buttons at the bottom of the chart, where they appeared originally (Without being associated with the chart legend).
Anyone know how to restore this behavior?
It works this way on other chart types, like line and bar. But it no longer works on the type of chart I wanted to use which is a Pie chart. I have opened new instances of Excel and tried to create a Pivot Chart Pie chart and get the same results:
the axis fields are associated with the chart legend, instead of being available independently.
Any help that can be provided would be appreciated
Thanks!!

I guess you may want to let the Pivot chart shows like the screenshot below:
If so, you need to add a new column(Equal to the field which you want to put into the AXIS field) to source data, then in the Pivot Table, put this field to the FILTERS .
This was working fine until I added the filters as slicers, decided I didn't like them, and deleted them
I don't think this operation you did would change any behavior. Perhaps you can upload this file to a file sharing site and then share the link with us.
Wind Zhang
TechNet Community Support

Multiple values for multiple fields sharing common id

I'm new to Reporting Services and I need to create report based on a common child id that includes multiple values from multiple fields in several tables. I can combine all the values into one query for a list report; however, this causes the rows to duplicate
multiple times based on the differing fields having multiple values (i.e. report contains various child ids and multiple medication dates/names, multiple health diagnoses with onset dates, multiple health service dates/values, multiple immunization types and
service dates, etc). If I create a list report and try to use various tables, I run into problems with how the tables view the data due to the duplicating child id rows from multiple field values on that child id. If I hide duplicates for these different tables,
I can run into spacing issues from the duplicating rows and/or hiding data that shouldn't be hid.
I need the report to have the basic non-duplicating child info (id, name, basic health info) and then also have various sections that contain fields with numerous values (i.e. section for health issue name and onset dates, section for medication name and
prescription dates, section for health service name and service date, etc). I would want a page break after each child id and would want all the child ids to be viewed/exported for printing purposes at the same time (i.e. not choosing one child id at
a time to print or view the data). I have tried to create one main table on a list report with various subreports on the child id; however, this is hard for my machine to process (it takes forever) and I can only view/export one child id at a time when I use
child id as the report parameter.
Any help you can give this newbie would be greatly appreciate.
Thanks,
Melissa S.
What's the best way for me to
MelissaS

Hi simpson213,
According to your description, you have some questions about your report design.
1. How to have non-duplicating child info?
In this scenario, since you don't want to hide the duplicate data, we suggest you filter the duplicated records on query level by using Distinct statement. If you want to do it on report level, you can group
records on chid id and use First() function on other fields.
Reference: First Function (Report Builder and SSRS)
2. How to have various sections that contain fields with numerous values?
We can also add these fileds into the child group of child and have them toggled by child id.
Reference: Add an Expand/Collapse Action to an Item (Report Builder and SSRS)
3. How to add a page break between each child?
Right click on the Row Group(child id)->Page Break->Select between each group instance.
Reference: Add a Page Break (Report Builder and SSRS)
4. How to select multiple child id when rendering report?
When creating parameter, select Allow multiple values in General.
Reference: Add, Change, or Delete a Report Parameter (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Custom metadata field with date filtering like built-in Date field

I've added a custom metadata field OK and now want to add an additional custom metadata field that contains the date the photos were exported by my plugin. The types of metadata values don't include a date field.
I've tried using a string with the value returned by os.date() and that does indeed add the date and time but what I'm really looking for is a way to add a date field so it will have the same behaviour that the built-in Date field does.
When I use Library Filter: Metadata, the Date column shows the date with a series of disclosure buttons in a hierarchy, e.g.,
Date
All (1 Date)
V 2009
V November
V 27-Friday
Is this some magic for the built-in field or is there some way of formatting the date so Lightroom knows it's a date and can treat it the same way as the built-in date?
Abe

Thanks. I've just added a date string. It's not an ideal solution but it's the best I can manage at this time. Maybe in LR3.
Abe

IS-RETAIL: How to update custom enhancement field using BAPI?

Hi gurus,
Like ECC BAPI: BAPI_MATERIAL_SAVEDATA,
This BAPI(BAPI_MATERIAL_MAINTAINDATA_RT) is specific for IS-RETAIL to create and update material master data.
But now If I append one custom field "ZFIELD" to end of table MARA, my question is how to update this custom enhancement field(ZFIELD) using BAPI(BAPI_MATERIAL_MAINTAINDATA_RT)
Thanks in advance!

Hi DongHai,
I suggest you create your own BAPI. Just copy the codes in BAPI_MATERIAL_MAINTAINDATA_RT and add your custom fields. If you want to append the data of the custom field in table MARA, first, you have to create a structure table then goto SE11, type MARA and display. Click the APPEND STRUCTURE then choose the structure that you've created. Hope this will help.
Rewards if useful
Regards,
Mark

Custom metadata fields used in file name?

Hi,
Is it possible to add to the list of meta data fields that are used as tokens for file names?
I've been using Rob Cole's excellent custom meta data in the library module and now I want to use these fields to name the file during export...
While at it, is it possible to add the same custom meta data fields to the info view overlay in develop mode?
Cheers,
Bonny

1. Its possible an export filter (post-process action) could be defined that supports the custom metadata for export filenaming (Lightroom itself does not have any other hooks I'm aware of) - dunno if anyone's done that, yet.
2. I think not (see PM).
Rob

How to use ADD_METADEF to add a custom metadata field

Hi All,
I am trying to add a custom metadata field to check in profile, and this I want to do using RIDC library through my java program. I have tried the following code, but some how I could not see its getting added to Information Fields and also to Standard check in profile.
Can you let me know what am I missing?
            myIdcClient = myIdcClientManager.createClient("idc://XXXX:4444"); // just commented out
            IdcContext myIdcContext = new IdcContext("weblogic", "weblogic1");
            ServiceResponse myServiceResponse = null;
              DataBinder myRequestDataBinder = myIdcClient.createBinder();
                myRequestDataBinder.putLocal("IdcService", "UPDATE_OPTION_LIST");
                myRequestDataBinder.putLocal("dKey", "xLocationList123");
              myRequestDataBinder.putLocal("OptionListString", "Madrid\nTokyo\nLondon\nWashington");
                myServiceResponse = myIdcClient.sendRequest(myIdcContext, myRequestDataBinder);
                myRequestDataBinder = myIdcClient.createBinder();
                myRequestDataBinder.putLocal("IdcService", "ADD_METADEF");
                myRequestDataBinder.putLocal("dName", "xLocations123123");
                myRequestDataBinder.putLocal("dIsRequired", "0");
                myRequestDataBinder.putLocal("dOptionListKey", "xLocationList123");
                myRequestDataBinder.putLocal("dOptionListType", "choice");
                myRequestDataBinder.putLocal("dIsOptionList", "1");
                myRequestDataBinder.putLocal("dIsSearchable", "1");
                myRequestDataBinder.putLocal("dIsEnabled", "1");
                myRequestDataBinder.putLocal("dType", "Text");
                myRequestDataBinder.putLocal("FieldName", "xLocations123123");
                myRequestDataBinder.putLocal("dCaption", "Locations");
                myServiceResponse = myIdcClient.sendRequest(myIdcContext, myRequestDataBinder);
                myRequestDataBinder = myIdcClient.createBinder();
                //IdcService=UPDATE_META_TABLE
                myRequestDataBinder = myIdcClient.createBinder();
                myRequestDataBinder.putLocal("IdcService", "UPDATE_META_TABLE");
                myServiceResponse = myIdcClient.sendRequest(myIdcContext, myRequestDataBinder);
                myRequestDataBinder = myIdcClient.createBinder();
                myRequestDataBinder.putLocal("IdcService", "START_SEARCH_INDEX");
                myRequestDataBinder.putLocal("IsRebuild", "1");
                myServiceResponse = myIdcClient.sendRequest(myIdcContext, myRequestDataBinder);
                myRequestDataBinder = myIdcClient.createBinder();
                myRequestDataBinder.putLocal("IdcService", "PUBLISH_SCHEMA");
                myServiceResponse = myIdcClient.sendRequest(myIdcContext, myRequestDataBinder);
Thanks in advance.

Try calling the following code:
import static intradoc.shared.MetaFieldUtils.hasDocMetaDef;
import static intradoc.shared.MetaFieldUtils.updateMetaDataFromProps;
import intradoc.common.ServiceException;
import intradoc.data.DataBinder;
import intradoc.data.DataException;
import intradoc.data.Workspace;
    protected static void addMetadataFields(final Workspace workspace, final DataBinder binder) {
        traceVerbose("Start addMetadataFields");
        // Parameters for metadata field
        final String[] parameters = new String[] { "dsdComponentName", "dComponentName", "dsdVersion", "dType", "dIsRequired", "dIsEnabled", "dIsSearchable", "dIsOptionList", "dOptionListKey", "dOptionListType", "dDefaultValue", "dOrder", "dIsPlaceholderField", "dsdCheckFlag",
                "dsdDisableOnUninstall" };
        // Common values for primary and alternate field values
        final String[] values = new String[] { "ComponentName", ComponentName, "build_1_20131206", "BigText", "0", "1", "1", "0", "", "", "", "2500", "0", "", "" };
        // Primary file checksum field parameters and values
        final Properties field = new Properties();
        for (int i = 0; i < parameters.length; i++) {
            field.put(parameters[i], values[i]);
        // Setup primary file specific parameters
        field.put("dName", "Metadata field name");
        field.put("dCaption", "Metadata field caption");
        try {
            // Name of metadata field
            final String fieldName = field.getProperty("dName");
            trace("dName: " + fieldName);
            if (fieldName != null && fieldName.length() > 0 && !hasDocMetaDef(fieldName)) {
                try {
                    updateMetaDataFromProps(workspace, null, field, fieldName, true);
                    trace("Successfully added metadata field " + fieldName);
                } catch (final ServiceException e) {
                    warn("Metadata field " + fieldName + " was not installed.", e);
                } catch (final DataException e) {
                    warn("Metadata field " + fieldName + " was not installed.", e);
            } else {
                trace("Metadata field already exists; will not modify");
        } finally {
            traceVerbose("End addMetadataFields");
Jonathan
http://jonathanhult.com

How to use customer-specific fields with FI-CA event 940?

The following text can be found under FI-CA event 940:
You can also set customer-specific fields if you have defined the predefined include for customer enhancements CI_FKK_ACCIT_CUS in the structure FKK_ACCIT_CUS. The fields included here must have the same field name as the fields included in the structure ACCIT. These can also originate from an enhancement of the coding block in General Ledger Accounting. The fields Reservation Class and Reservation Key of the reconciliation key and the totals record are available as import parameters.
My requirement is to populate the field HZUON in this event, which will be called when running t-code FPG1 (Transfer of FI-CA total records to general ledger)
The problem is the fact that the output of the event (i.e. output of function module FKK_SAMPLE_0940 at first) only have the following fields:
E_ZUONR     LIKE     ACCIT-ZUONR     Zuordnung (BSEG-ZUONR)
E_XREF2     LIKE     ACCIT-XREF2     Referenz (BSEG-XREF2)
E_SGTXT     LIKE     ACCIT-SGTXT     Positionstext
E_BUPLA     LIKE     ACCIT-BUPLA     Businnes Place (Korea only)
I tried adding a new field to structure CI_FKK_ACCIT_CUS and adding this field to the output of the event 940, but how do I ensure that the content of the field will be used to populate the HZUON field of the FI document during "transfer of FI-CA total records to general ledger"?
Cheers,
Teo

Hi Teo,
I happened to see this post from you when I searched for a similar scenario related to event 940. I also need to add two fields in CI_FKK_ACCIT_CUS and make these fields as outputof the event. Did you come across any solution for the same? If so, can you please share.
Regards,
Harikumar. S
Edited by: Harikumar Sasidharan on Dec 30, 2009 12:14 PM

Custom built field to be used as lable in pie chart having multiple values

Similar Messages

Maybe you are looking for