Custom Column in SOCO output for SRM

Hi Experts,
I am facing the issue while adding the Custom fields with SOCO. I am working with SRM 7.0
Steps I have performed is as below:
1. Appended the custom fields with structure: INCL_EEW_PD_ITEM_CSF_SC and INCL_EEW_PD_ITEM_CSF
2. Added the attribute with Node: RESULT_FIELDS of View V_AO_SOCO_GAF_1_EHP in Component Controller: /SAPSRM/WDC_DO_SOCO_GAF_1
3. Added Column in Table and Mapped it with node attribute (Fields is displayed in the table)
While search I can see the fields in Class: /SAPSRM/CL_CH_WD_DOM_SOCO_GAF1
Method: /SAPSRM/IF_CLL_DOM_SOCO_GAF1~SEARCH
Internal table: lt_item_list
Method: /SAPSRM/IF_CLL_MAPPER~REFRESH
Internal table: mt_displayed_list
Here, I have enhanced the 'REFRESH' method and added the value to the field.
I have read the Node RESULT_FILEDS in Webdynpro Component WDDOMODIFYVIEW method, and found that all the values are updated in node attribute.
Only issue I am facing that, value not getting displayed in the custom fields of SOCO list.
Any help is highly appreciated.
Regards
Chandan

Hi Chandan,
You need to update in BUT000 to get the value displayed, for that you need to do below coding.
Update the custom field in the table BUT000:
To update the custom field value in the BUT000 table, you need to implement the Implicit enhancement in the class : /SAPSRM/CL_PDO_BP_UPDATE_BUFF , Method : PREPARE_PD_CP_BASIC_DATA
Implement the Implicit enhancement at the end of the method and logic will be below :
if MS_BUFFER_CHANGE-COMPANY_DATA-Z_INDUS_KEY NE MS_buffer_master-COMPANY_DATA-Z_INDUS_KEY (this is your cutom field). (This condition is for update action)
move 'X' to MS_PD_BUPA-DATA_CENTRAL_EXT_X-Z_INDUS_KEY (this is your cutom field). .
MOVE-CORRESPONDING ms_buffer_change-company_data-ext_csf to ms_pd_bupa-data_central_ext.
else. (This condition is for create action)
MOVE-CORRESPONDING ms_buffer_change-company_data-ext_csf to ms_pd_bupa-data_central_ext.
endif.
Regards
Venkatesh P

Similar Messages

How to make the display of custom column names in UWL(not bother abt values

Hi all
i want to make the display of custom column names in UWL ( for example GP)
i dont want or not looking about values for those custom columns . i know that thru custom connector we can achieve to retrieve the values for those custom columns. but currently i am looking only just to display the custom column names( for example GP custom column names, just i want to display the name of the columns ) in UWL .
Thanks
Sunil

Hello Prashant,
You can add the control to your custom pagelayout, the following article has an example:
http://spandps.com/2012/02/22/showing-the-audience-target-field-in-an-editmodepanel-sharepoint-sp2010-in-projectserver-ps2010/
Btw, the SPFieldTargetToControl has a required property:
http://msdn.microsoft.com/en-us/library/microsoft.office.server.webcontrols.fieldtypes.spfieldtargettocontrol.required(v=office.14).aspx
- Dennis | Netherlands | Blog |
Twitter

Implementing BADI MD_ADD_COL_EZPS for MD04 custom column

Hi there,
I'm using BADI MD_ADD_COL_EZPS to display 3 new buttons and three new columns in MD04.
For each line item that is displayed, the custom column is filled, after the button is hit -This works fine.
My Question is:
Is there any way to limit the value that is filled into the new column so that it only appears on the FIRST line item/row?
(At the moment it is repeated all the way down the page - the new value is a material characteristic, so doesn't change, will always be the same for each line)
I've looked at all the available structures/tables in the FILL_ADD_COLUMNS method of the BADI, and none seem suitable
to determine the "first" row. (ie. something like the way SY-TABIX or SY-INDEX might be used)
Any help appreciated.
Thanks,
David.

Hi Shubhendu,
in the method 'ACTIVATE_ADD_COLUMNS', you can set the flag EZ1_MODE to '1' to make the first column visible always. (it's been a while, but I think setting it to '2' makes it visible when the button is pressed.)
Same applies to EZ2_MODE for second column, EZ3_MODE for third.
look at the flags/parameters in this method, and also in FILL_ADD_COLUMNS, to fill the data.
here you need to fill structure EMDEZX_USEX1 (for column 1) etc.
The code is hit for each record displayed in MD04
Hopefully this helps you.
Regards,
David

F-53 and F-28, Customized columns for cash discount and %

Hi Expert,
With reference to the subject of: Customized columns for cash discount and % ...
I faced the problem of not able to set / defined hidden column for cash discount and % by creating a new variant.
Steps:
Create a variant
Click <administrator> button ... mark the columns hidden, and click <activate> button
Then click <Save> button
Problem: Every time I using the F-53/F-28, the layout is not working, and when goto check the variant settings, the cash discount and % columns remained unchecked.
SAP version: 4.6
Kindly advise.
Thanks and regards,
sbmel

Hi JP,
It is not working using field status group, as I am using F-53 and F-28 and not FB50/60/70.
The purpose I want to create variant for screen after clicking <process open item> is to control column display (hide cash discount and %). if the variant is working, I can create a customized Tcode for the F-53 and F-28.
Now problem is that variant seem not working.
Thanks and regards,
sbmel

In BI Publisher Report of excel output for one column is filled with spaces

Hello,
We have issue in BI Publisher report of excel output.
In Excel output for one column few records are displaying as left alignment
and few record are displaying as right alignment.
If you are having any xml tag or any syntax for removing spaces for left side
Please help on this issue.
Thanks in Advance.
Regards,
Swaraj

Please post the details of the application release, database version and OS along with BI Publisher.
Is the issue with all reports or specific one(s) only?
Do you have the patches in the following docs applied?
Overview of Available Update Patches for Oracle BI Publisher Enterprise 10g [ID 797057.1]
Overview of Available Update Patches for Oracle BI Publisher Enterprise 11g [ID 1276869.1]
Overview of Available Patches for Oracle XML Publisher embedded in the Oracle E-Business Suite [ID 1138602.1]
BI Publisher 10g RTF Template Changes Alignment Settings for Numbered Lists [ID 1418504.1]
Thanks,
Hussein

Custom column added is not available for Calendar list view in SharePoint 2010

I created a custome column "Breakline" in a custom content type 'SM event", and applied the content type to a Calendar.
The column is listed under the content type "SM event" but it is not listed when I tried to modify the view using the "Breakline" column.
Does anyone know why?

I set "Breakline" hidden because I don't want to show this in create new item form.
I realized that may be the reason. So changed the column to Optional in CT and created a new calendar using that CT. then at list level CT I changed it to Hidden. That works. The column is available for use when modifying view.
Thanks

Custom column in a list view web part for a multilingual site does not take on custom language labels. Stays in default language.

Hello all,
I have what so far appears to be a fairly unique problem. We are running a multilingual SharePoint 2010 environment with English as the default language and French as the secondary. We have setup the sites in a variance relationship, but the
issue I am discussing happens outside of a variant as well.
We have created a library outside the variant (but within the collection) that the two sites must share. A list view web part was created via Designer to add to each site to provide a quick view into the list. If we are in the libary and switch
to French, then update the column label it will remember the setting (because of the resource file) and maintain it as the language is flipped back and forth. Where it doesn't work is as a web part in a variant or where the language is different.
If the language is different, the out of the box columns work find, but the custom columns (all site columns not library\list columns) remain as the english label. It doesn't matter if within a variant or outside with the browser language changed.
It always reverts back to English. It's like it isn't using the same resource file that was used in the list itself.
I created a custom view and modified it with xslt as per
http://sharepoint.stackexchange.com/questions/50004/how-to-change-column-title-for-a-view-but-not-modify-the-list but this only worked within the list and did not occur in the list view either.
I can't be the first that has come across it, either I am not performing my searches properly, no one has ever documented a fix for this or this is something we just can't fix with OOTB tools. That's the other thing, the solution has to be accomplised
OOTB or with minor client side changes. I can't fire up Visual Studio because they are piloting Office 365 and have put a "No custom code" mandate on for migration.
Thank you all in advance.

Ok, I have come up with a solution. I edited the XSLT for the web part on the page. I did the following:
1.   Create the variants in the Site Ccollection
2.   Create the library outside of the variants.
3.   Add all the columns you require for the library. It is very important all the columns are there before you move on.
4.   Create a French and English view.
5.   Create the list view web part via designer.
6.   Add the list view web part to each site selecting the appropriate view to use.
7.      Edit the page in SharePoint Designer 2010.
8.      Place cursor in the column you wish to modify.
9.      Click Design in the List View Tools on the ribbon.
10.     Then click Customize XSLT and select Customize Item. Select this option otherwise you will generate a **LOT** of unnecessary XSL code.
11.     You are looking for a piece that resembles the following:
        <xsl:with-param name="fieldtitle">
          <xsl:value-of select="@DisplayName"/>
        </xsl:with-param>
12.      Modify it by typing in the actual column name you want. You should end up with something like this:
        <xsl:with-param name="fieldtitle">
          New Column Name.
        </xsl:with-param>
13.      Now, for this page only, the column will be renamed.
There are some caveats:
1.   Doesn’t appear to work in a publishing portal. I think this has to do with how SP stores the pages in this case. In a publishing portal you can only modify the page layout which won’t work as we need to modify the content.
2.   If you add another column, you will need to repeat the XSLT modification
Anyways, I hope this helps out any others with the same issue or need as I had.

Column headings are missing in the output for ALV?

Hi all,
i have coded a small report in ALV mode. i am getting the data but the column headings are missing.
iam not getting the column headings in the output. it is coming as blank. Could you all please help me out in this?
below is the code of my program:
                 Includes                                            *
*---Standard header and footer routines
INCLUDE zsrepthd.
*--- ALV Routines
INCLUDE zvsdi_alv_routines_ver3.
*--- Authorization Check
INCLUDE z_selection_auth_check.
                 Types Declarations                                  *
tables : ekpo.
                 Types Declarations                                  *
TYPES: BEGIN OF ty_ekpo,
        EBELN(18) TYPE C,
        EBELP(20) TYPE C,
        MATNR(18) TYPE C,
        WERKS(11) TYPE C,
      END OF ty_ekpo.
*-Output field name
TYPES: BEGIN OF ty_output,
        EBELN(18) TYPE C,
        EBELP(20) TYPE C,
        MATNR(18) TYPE C,
        WERKS(11) TYPE C,
      END OF ty_output.
*-Output field name
TYPES: BEGIN OF ty_fields,
        fname(60) TYPE c,
       END OF ty_fields.
                 Internal Table Declarations                         *
DATA:it_ekpo TYPE STANDARD TABLE OF ty_ekpo,
*--- Alv parameters
    it_out_alvp TYPE typ_alv_form_params, "for alv parameters
*-Field catalog for ALV display
    it_fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
*-Field names for Excel column headings
it_ekpo_fields TYPE STANDARD TABLE OF ty_fields WITH HEADER LINE.
**--To store output for Principial Pegging data
DATA: BEGIN OF it_output occurs 0,
        EBELN(18) TYPE C,
        EBELP(20) TYPE C,
        MATNR(18) TYPE C,
        WERKS(11) TYPE C,
      END OF it_output.
**--To store output for 2nd
DATA: BEGIN OF it_output1 occurs 0,
        text(2000),
       END OF it_output1.
                 Data Declarations                                   *
data: v_ebeln TYPE ekpo-ebeln,
      v_ebelp TYPE ekpo-ebelp,
      v_matnr TYPE ekpo-matnr,
      v_werks TYPE ekpo-werks.
                 Constants Declarations                              *
CONSTANTS:
     c_0    TYPE i     VALUE 0,
     c_x    TYPE char1 VALUE 'X',
     c_i    TYPE char1 VALUE 'I',
     c_eq   TYPE char2 VALUE 'EQ',
     c_ekpo TYPE char4 VALUE 'EKPO',
     c_hyfn TYPE char1 VALUE '-'.
                 Work Area Declarations                              *
DATA: x_output_ekpo type ty_output,
      x_ekpo type ty_ekpo.
                 Selection Screen                                    *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-f01.
SELECT-OPTIONS:
      s_ebeln FOR v_ebeln OBLIGATORY,
      s_ebelp FOR v_ebelp,
      s_matnr FOR v_matnr,
      s_werks FOR v_werks.
SELECTION-SCREEN END OF BLOCK b1.
                 At Selection Screen                                 *
AT SELECTION-SCREEN.
                 Start-of-Selection                                  *
START-OF-SELECTION.
*--- Check Authorizations for Selection-screen
PERFORM z_selection_auth_check.
*--- Fetch Purchasing Document Item data
PERFORM fetch_status_pp.
                 End-of-Selection                                    *
END-OF-SELECTION.
**-- Download data to final internal table.
PERFORM data_output.
IF NOT it_output[] IS INITIAL.
*--- Fill the structure for calling the ALV form
    PERFORM initialize_alv_params.
**-- Display ALV Report
    PERFORM setup_and_display_alv_ver2
       USING
     it_out_alvp        "Parameter structure
     it_output[]        "Internal Data table(header table)
     it_output[].       "Dummy table for Hierarchical ALV!!(item table)
    ENDIF.
IF it_output[] IS INITIAL.
    MESSAGE i999(zi) WITH 'No data found for selection'(i02).
ENDIF.
*&      Form FETCH_STATUS_PP
Get data from ekpo table
FORM FETCH_STATUS_PP .
*-Fetch PP Data from ekpo table
REFRESH it_ekpo.
SELECT EBELN
         EBELP
         MATNR
         WERKS
         FROM ekpo
         INTO TABLE it_ekpo
         WHERE ebeln IN s_ebeln
           AND ebelp IN s_ebelp.
IF sy-subrc = c_0.
    SORT it_ekpo BY ebeln ebelp.
ENDIF.
ENDFORM.                    " FETCH_STATUS_PP
*&      Form f_top_of_page
*This is to write the top of page
FORM top_of_page.
DATA: lt_list TYPE slis_t_listheader,
         lx_list TYPE slis_listheader.
*--- Title name
CLEAR lx_list.
lx_list-typ = 'S'.
lx_list-key = 'Title name'(t13).
lx_list-info = sy-title.
APPEND lx_list TO lt_list.
IF NOT lt_list IS INITIAL.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
      EXPORTING
        it_list_commentary = lt_list.
ENDIF.
ENDFORM.                    "top_of_page
*&      Form init_page_head
Description : This subroutine initializes the fields in table BHDGD *
              for printing the report heading.                       *
FORM init_page_head.
bhdgd-line1 = 'SLA Status Report'(h04).
bhdgd-line2 = sy-title.
bhdgd-lines = sy-linsz.
bhdgd-fcpyrt = sy-uline.
bhdgd-inifl = '0'.
ENDFORM.                    "init_page_head
*&      Form initialize_alv_params
Description : Form to initialize ALV Params
FORM initialize_alv_params.
CONSTANTS: lc_alv_grid TYPE char1 VALUE 'G', "Grid
             lc_u         TYPE char1 VALUE 'U'.
MOVE 'IT_OUTPUT' TO   it_out_alvp-tablname.   "final table
MOVE sy-repid    TO   it_out_alvp-repid.
MOVE lc_alv_grid TO   it_out_alvp-alvtype.
MOVE c_x         TO   it_out_alvp-bringdefaultvar.
MOVE lc_u        TO   it_out_alvp-variantsavetype.
ENDFORM.                    " initialize_alv_params
      FORM it_out_init_events                                       *
-->this is form is to modify the events
FORM it_out_init_events
      CHANGING
       alevnts TYPE slis_t_event.
FIELD-SYMBOLS <alevnt> TYPE slis_alv_event.
LOOP AT alevnts ASSIGNING <alevnt>.
    CASE <alevnt>-name.
      WHEN slis_ev_top_of_page.
        MOVE 'TOP_OF_PAGE' TO <alevnt>-form.
    ENDCASE.
ENDLOOP.
ENDFORM.                    "it_out_init_events
*&      Form DATA_OUTPUT
Download data to final internal table
FORM DATA_OUTPUT .
loop at it_ekpo into x_ekpo.
    x_output_ekpo-ebeln = x_ekpo-ebeln.
    x_output_ekpo-ebelp = x_ekpo-ebelp.
    x_output_ekpo-matnr = x_ekpo-matnr.
    x_output_ekpo-werks = x_ekpo-werks.
    append x_output_ekpo to it_output.
endloop.
ENDFORM.                    " DATA_OUTPUT
      FORM it_out_alv_fieldcat_before                               *
--> PT_FCAT                                                       *
--> ALVP                                                          *
FORM it_out_alv_fieldcat_before CHANGING
    pt_fcat TYPE slis_t_fieldcat_alv
    alvp TYPE typ_alv_form_params.
DATA: lx_fcat TYPE slis_fieldcat_alv.
CLEAR lx_fcat.
lx_fcat-tabname        = 'IT_OUTPUT'.
lx_fcat-fieldname      = 'EBELN'.
lx_fcat-col_pos        = '1'.
lx_fcat-ddictxt        = 'M'.
lx_fcat-seltext_l      = 'Purchasing Doc No'(018).
lx_fcat-seltext_m      = 'Purchasing Doc No'(018).
lx_fcat-seltext_s      = 'Purchasing Doc No'(018).
lx_fcat-reptext_ddic   = 'Purchasing Doc No'(018).
APPEND lx_fcat TO pt_fcat.
CLEAR lx_fcat.
lx_fcat-tabname        = 'IT_OUTPUT'.
lx_fcat-fieldname      = 'EBELP'.
lx_fcat-col_pos        = '1'.
lx_fcat-ddictxt        = 'M'.
lx_fcat-seltext_l      = 'Item No Purchasing Doc'(020).
lx_fcat-seltext_m      = 'Item No Purchasing Doc'(020).
lx_fcat-seltext_s      = 'Item No Purchasing Doc'(020).
lx_fcat-reptext_ddic   = 'Item No Purchasing Doc'(020).
APPEND lx_fcat TO pt_fcat.
CLEAR lx_fcat.
lx_fcat-tabname        = 'IT_OUTPUT'.
lx_fcat-fieldname      = 'MATNR'.
lx_fcat-col_pos        = '1'.
lx_fcat-ddictxt        = 'M'.
lx_fcat-seltext_l      = 'Material'(010).
lx_fcat-seltext_m      = 'Material'(010).
lx_fcat-seltext_s      = 'Material'(010).
lx_fcat-reptext_ddic   = 'Material'(010).
APPEND lx_fcat TO pt_fcat.
CLEAR lx_fcat.
lx_fcat-tabname        = 'IT_OUTPUT'.
lx_fcat-fieldname      = 'WERKS'.
lx_fcat-col_pos        = '1'.
lx_fcat-ddictxt        = 'M'.
lx_fcat-seltext_l      = 'Supply plant'(013).
lx_fcat-seltext_m      = 'Supply plant'(013).
lx_fcat-seltext_s      = 'Supply plant'(013).
lx_fcat-reptext_ddic   = 'Supply plant'(013).
APPEND lx_fcat TO pt_fcat.
ENDFORM.                    " it_out_alv_fieldcat_before.
Regards,
Shalini
Edited by: shalini reddy on Oct 7, 2008 5:08 PM

Hi,
The heading are in the table pt_fcat - you don't seem to be passing that in form....
PERFORM setup_and_display_alv_ver2
USING
it_out_alvp "Parameter structure
it_output[] "Internal Data table(header table)
it_output[]. "Dummy table for Hierarchical ALV!!(item table)
which I guessing in in one of the includes?
Saying that the extract pof code does not show where you are calling form it_out_alv_fieldcat_before ...which populates the headings...
Regards
Stu

How to pass custom search help(F4 help) for a field in ALV output?

Hi,
I want to activate the F4 help in ALV output for a field for which we do not have search help assigned at table ,data element and domain level.
In field catalog i have enabled it by below line.
ls_fcat-F4AVAILABL = 'X'.
but because there are no standard input help available it is giving message as "No input help is available".
so how to pass our custom search help (g_search) for any field in ALV output.
I am using object oriented ALV grid display.
Thanks!!!
Rajesh Gupta.

hi,
check this out:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/acdefb13-0701-0010-f1a2-8eeefa7d3780
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b3d5e890-0201-0010-c0ac-bba85ec2ae8d?quicklink=index&overridelayout=true

Custom Column for Project Code Number & Search Box to search Content in Project Server 2013

Hi all,
I want to add a custom column in Project Center view for showing some Numerical Projects codes like 4523, 5248,8956 like that... Each code will represent Project assigned with that code in Project Server 2013. Also let me now if i can add some search box
in Project Center page through which i can search Project Code or Project Name. Currently, provided search bar not working in Project Server 2013.
Need it urgent..Kindly help

Hi,
If you want to add this column in a project center view, be careful to choose a project view in the "manage views" views' list. Also it must be a project custom field and not a task field. As Paul said, we assume that the field with the code exists
and has been previousky created by you.
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Custom column to show total remaining storage space for a host

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

I'm looking for a way to easily view the total amount of remaining storage space for a virtual host. At present, viewing the properties for a host in VMM is the only way to view this in the GUI. I was looking at sourcing a Powershell command to do this,
and then feed it into a custom column, for easy viewing within the VMM main window. This is probably best suited to the Powershell forums, but I placed the post here, as I may have overlooked another way to achieve this within VMM itself. Has anyone desired
for such a thing?
Many thanks.

CHANGE THE OUTPUT MEDIUM FOR SRM PURCHASE ORDERS

We are using SRM 5.0
I tried to change the SRM purchase order's output
medium from 'XML' to 'Print' using a function module
'BBP_OUTPUT_PO_PARAMS_SET' within the BADI 'BBP_ECS_PO_OUT_BADI'. Though it changes the
output medium and chooses the right radio button
at the UI interface level (i.e)
Purchase order Header->output->
radio buttons(print,email,fax,xml)
It still holds the output medium as 'XML' at the
Document output log and process the document as 'XML'.
Is there a way to update the output log to hold the changed medium i.e (print)
Thanks and Regards,
Gia

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

Content Search Query Builder - filtering for custom column value

I want to use a CSWP to display certain pages in a slideshow format on a site. However, to filter them in a preferred manner, the pages library has a custom column "Spotlight" which is a Boolean type (e.g. yes/no).
In my "Build Your Query" configuration page, I have added a keyword filter "SpotlightOWSBOOL=Yes" as the criteria to display my results. This is not working, despite the fact that I currently have pages flagged as "Spotlight"
in this library.
My question is - how can I achieve this result of displaying only pages with a custom column value "Spotlight" as "Yes"?

Hi Owen,
Could you capture a screenshot about your Crawled Property for your list column "Spotlight"? Is it name "SpotlightOWSBOOL"?
If your library column name is "Spotlight", you can create a custom
Manged Property (e.g. create name as SpotlightMangedProperty)to map the
Crawled Propery (e.g. may ows_spotlight, or ows_SpotlightOWSBOOL?) genegrated by list column "Spotlight", then start a full crawl.
Then you can add the keyword filter like below in "Build Your Query" dialog of CSWP web part, then check if the correct items are filtered.
SpotlightMangedProperty:"yes"
If the above value "yes" doesn't work, please also try
SpotlightMangedProperty:"True", or try SpotlightMangedProperty:1
More information about this topic you can read is below.
https://technet.microsoft.com/en-us/library/jj219667.aspx#proc2
https://msdn.microsoft.com/en-us/library/office/ee558911.aspx#kql_property_restriction_queries
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Output for custom Invoice

Hi,
Is there any standard output for custom Invoice in SAP?

Hi Lalit,
Sure, have you ever checked condition type RD00 in transaction V/40?
Hongyan

Custom Column Name in Webpart file and Itemstyle for Content Query WebPart

I was trying to incorporate a custom column in the content Query WebPart.
The name of the column displayed in the list is "Risk Score"; a calculated column.
I right clicked on the field in the list settings and copy hte short cut which is pasted below:
http://<mainURL>/_layouts/FldEdit.aspx?List=%7BFE4CC761%2DE9B8%2D487C%2D8B92%2D1E42539144C4%7D&Field=Risk%5Fx0020%5FScore
Could you please let me know what can i type in the WebPart file exported and then to be imported in the section:
<property name="CommonViewFields" type="string"></property>
Also, please let me know what should i enter in the itemstyle.xsl in the section
<td style="width:30%; font-size:10px;font-family:Verdana;color:#007EB6; border-style:solid; border-width:medium;border-color:#E1E1E1;">
<xsl:value-of select="@Risk%5Fx0020%5FScore" />
</td>
Tnx

Ok.
Use like this
<property name="CommonViewFields" type="string">RiskStrore,Lookup</property>
and include like this in the itemstyle
<td >Risk store
<xsl:value-of select="@RiskStore" />
</td>

Custom Column in SOCO output for SRM

Similar Messages

Maybe you are looking for