Custom field in Bid Quote not editable/input enabled/changable

Hai All,
    In the SRM Surrogate Bidding process , PO is generated from the Quotation which corresponds to the bid which has been accepted. Now before generating the PO we need to pass the Ordering vendor address information from the Quotation back to the PO. We added a custom field to the Quotation following “ Note 672960 - User-defined fields 2” and it is being added to the ‘BASIC DATA TAB’ in the Header data of the Quotation, but we are not able to enter any values since it is in display mode.
   We then referred “ Note 809630 - Customer field in bid invitation and bid - How does it work? ”  ( after referring Notes 458591 and 672960), and found that we need to implement the methods MODIFY_SCREEN and MODIFY_MODE_QUOT of the BADI BBP_CUF_BADI_2.
         The MODIFY_SCREEN method works fine, but the MODIFY_MODE_QUOT is not getting called during the Bidding process.  MODIFY_MODE_QUOT is already existing in the system as per the “ Note 822424 - CUF. Customer fields cannot be changed in the bid ”. Also Function-Pool SAPLBBP_PDH_CUF does not have any calls to the method MODIFY_MODE_QUOT but it has calls for the other 3 methods present in that BADI.
       We would like to know (1) How we can make this MODIFY_MODE_QUOT work? (2) And if it is working, Will MODIFY_MODE_QUOT along with MODIFY_SCREEN make the field in the Quotation Input enabled, and/or (3) Is there any other way by which we could make the field Input enabled, for the Users to enter some values, before they Click the Generate PO button.
Please help.
Thanks,
Ghanesh

Hi Ghanesh and SRM experts,
I went through your link mentioned below and I have the EXACT same issue. I am using SRM 5.5 and I have added a custom field to the quotation item level. I am unable to make this field editable no matter what I do .
1)  I have gone through all notes mentioned in your scrap and I have implemented them all .
2) I have added the custom field to INCL_EEW_PD_ITEM_CSF_QUOT and INCL_EEW_PD_ITEM_CSF.
3) I have also implemented BADI BBP_CUF_BADI_2 and I confirm that the method MODIFY_MODE_QUOT is never getting called. MODIFY_SCREEN is getting called , and the value of the flag ET_FIELDS-XINPUT is always 'X'. Still the quotation field is display only.
Your post is dated a few months back. If you have solved this problem could you please let me know how.
Help from anyone who anything about the above will be appreciated.
Thank You .
Regards,
Ajali Sen

Similar Messages

  • Creation of custom field on BId screen And send this data to backend in PO

    HI Expert,
    I have to add custom field on bid item data. I have did this and able to see this field on bids screen.
    the scenario is like once bid is accepted it will create PO in backend.
    now i need to carry the data from this custom field to backend PO.
    please give me the solution if it possible. we are using classic scenario.
    thanks in advance.

    thanks for reply
    I have did same thing but in input parameter of bado i am getting the shoping cart GUID . form which how i can get the Bid detail.
    and other part is I need to send data by extension this this how we can do ?
    do we need to write code in backend also and need to create custom field in backend PO table.
    Thaks for reply

  • Tabular Customer Fields - SC & Bid Invitation - Unable to display

    Hi,
    I am facing difficulty in displaying tabular customer fields for Shopping Cart and Bid Invitation. I have followed the steps given in the Consulting Note 672960.
    I have added 3 fields for the append structures of INCL_EEW_PD_ITEM_CST, INCL_EEW_PD_ITEM_CST_SC & INCL_EEW_PD_ITEM_CST_BID.
    Per Note 672960, Once the structures have been activated, the tabular customer fields will be displayed on the screen. But I am not able to see them under Shopping Cart Item level Basic Data Detail Screen as well as for Bid Invitation.
    Any thoughts or Am I missing some steps here.
    thanks, Ram P

    The SAP Note also says the following:
    =====
    If you define fields for the first time, the system generates a screen for the display. If you create or delete fields, the screen must be regenerated. To do this, start report BBP_DYNPROS_GENERATE, change the proposed program to SAPLBBP_PDH_CUF and execute the report. Select the checkbox for the screens with the descriptions BBP_PDS_HCF for the table-like fields at the header and/or with the description BBP_PDS_ICF for the table-like fields at the item. You can use the 'Copy' button to enforce a regeneration of the screens.
    =====
    You may want to regenerate the screen according to the Report: BBP_DYNPROS_GENERATE.
    But adding to Structure: INCL_EEW_PD_ITEM_CST_SC, INCL_EEW_PD_ITEM_CST_BID and INCL_EEW_PD_ITEM_CST should have worked if everything referencing these structures are compiled and activated correctly.
    Hope that helps,
    stirfry...today is 'tofu'

  • Error: Field BNKA-BNKLZ . is not an input field

    Dear Experts,
    My client following vendor creation process is as follows
    Requestor logs his request into EP -> it is recorded into MDM -> after approval from central team, it syndicate into SAP -> Idoc entry -> Table entry
    Now in case of vendor request comes with bank data, Idoc gets failed with error message u201CField BNKA-BNKLZ . is not an input fieldu201D
    Message no. 00347
    Diagnosis:
    A transaction is processed using batch input.
    System Response:
    The runtime error field xxx occurs (invalid entries)
    Procedure:
    Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
    Batch input session
    CATT procedure
    Application program
    If I reprocess this Idoc in foreground mode in Tcode: WE19 it is getting successfully posted.
    Kindly help me to resolve this issue.
    Regards,

    Can it be that you have bank data in your vendors for banks that are not yet created.
    if you create vendors manually then SAP is creating the bank master record automatically in background if not present when you entered bank data in the vendor master.
    But in IDOC processing, SAP just focus on the master data transferred with the IDOC, it creates vendor masters, but it does not create  central address data  nor bank data.
    you have to create the banks as a preceeding step to vendor creation.

  • [Project Pro 2013] User Custom Field w/ Formula does not calculates on Group Tasks

    This issue happens only on Project 2013. When I make a formula (using Duration, Cost, Number, etc...) on a custom field and set "Use formula" option in "Calculation for task and group summary rows",
    works fine without groups, on resume tasks. But when I Group the tasks, the group tasks values disappear.
    When I open the same file on Project 2010, it works correctly.
    Thanks in advance.

    Thank you for the effort. This problem is a bit tricky and hard to explain without images or files.
    I'll try to explain using your example:
    - I do not coded my summary tasks with the value in the "Text1" field and
    - I do not want to maintain hierarchy on groups like you show.
    1. On "No Group" mode, the summary tasks works fine. All summary tasks shows the values calculated by the formula. Summary tasks are not the problem.
    2. However, when you group the tasks by Text1, the Group Tasks (the colored ones that appear on group mode: Group: a, b and c) do not show the values calculated by the formula, even if you set to "use formula" on summary and group tasks.
    3. When you open the same file on Project 2010 (default configs), group tasks values appears (values calculated for the groups of the detail tasks: a, b, c). If your Duration1 field stays the same or disappear, change some values and refresh the field to check
    the formula is working.
    4. If you see that everything are working correctly so far, try this on your file:
    4.1. Maintain your tasks grouped by Text1.
    4.2. Add three Fields: "Duration2", "Duration3" and "Duration4".
    4.3. On every detail tasks, enter 2 days for Duration2, 3 days for Duration3.
    4.4 Set Duration2 and Duration3 to "show Average" value on the resume and group tasks. Set the Duration4 to "use formula".
    4.5. Create on Duration4 field a simple formula, like [Duration2]+[Duration3], or [Duration2]/[Duration3].
    4.6. See that the formula works fine the detail tasks (Duration4 = 5 days).
    4.7. Now the problem: The group tasks shows nothing. Duration4 should be calculated (average duration2: 2 days + avg duration3: 3 days = 5 days).
    4.8. Save the file and open on Project 2010. If the resume tasks on Duration4 continues to show nothing. Refresh the field by clicking right button on field and going to "Custom field" and pressing OK.
    See that Duration4 are calculated on Project 2010 correctly, but not on 2013 version. That is the problem
    Thanks again. I hope it helps.

  • Custom field in BP_PDBGP table not getting updated

    Hi,
    i am working in Contract management in SRM 7.0 Pack 6. I have aadded a custom field in partner table which appears in the partner table of contract header. It is a checkbox. when i check it the value gets saved in BBPPDBGP table for the first time after that if i try to uncheck it the value is not getting updated. I checked in the BBP_DOC_CHANGE_BADI, the value which is getting passed is correct but it doesn't update the databse accordingly.
    Any suggestions? is this a standard bug?
    Neha

    Hi Virendra,
    Thanks a lot for your suggestion.
    Where should i check? If the data passing to BBP_DOC_CHANGE_BADI is correct then that means at the webdynpro side there should not be any problem and as per the standard after doc_change also it should save properly. i also checked the badi there is not dependent coding done over there. DOC_SAVE badi is also inactive for contract business object. Hence, i am not getting any clue where could be the problem.
    Let me know if you want more details inorder to analyse this problem.
    Thanks &Regards,
    Neha

  • Custom fields from Shopping cart not getting transferred

    We have added a few custom fields in both Shopping cart and PO screens.
    Somehow when a cart is getting converted to a PO, the values maintained in the shopping cart are not flowing in to the PO.
    Please advice as to what needs to be done to take care of this issue.
    Thanks.
    Anuradha SenGupta.

    Hello Anuradha,
    Please go thru the link .
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20b36c12-685f-2c10-4fb4-ba2e0b969c27?QuickLink=index&overridelayout=true
    Also in your badi BBP_CREATE_BE_PO_NEW, try to implement the code in the similar way which I did for creating PR in Backend.
    DATA : ls_req_item TYPE bapi_te_requisition_item.
      LOOP AT is_sc_document-item INTO wa_sc_item.
        wa_extension-structure        = 'BAPI_TE_REQUISITION_ITEM'.
        ls_req_item-preq_item         = wa_sc_item-number_int.
        ls_req_item-z_req_type_db     = wa_sc_item-z_req_type_db.
        wa_extension-valuepart1       = ls_req_item.
        APPEND wa_extension TO cs_rq_document-it_extensionin.
        CLEAR wa_extension.
        ls_req_item-preq_item         = wa_sc_item-number_int.
        ls_req_item-z_asset_sub_cat   = wa_sc_item-z_asset_sub_cat.
        wa_extension-valuepart1       = ls_req_item.
        wa_extension-valuepart2       = ls_req_item.
        APPEND wa_extension TO cs_rq_document-it_extensionin.
        CLEAR wa_extension.
      ENDLOOP.
    Hope this will help you.

  • Adding customer field into  BID item Overview

    Good afternoon,
    (SRM 5.5)
    I have added the customer field in the BID.
    Is it possible to show it, in the "Item Overvier of BID"?
    Alexey

    Hi,
    Generally through the INCL_EEW* structures,you can add the custom fields for the Bid Item only under the BASIC DATA tab.If you want to show up a field on the Item overview screen,then this will need std code modification(screen modification) or  need to  modify the HTML template for the BID item overview screen in the ITS service BBP_QUOT which will need lot of HTML expertise.
    Hope this helps.
    BR,
    Disha.
    Do reward points for  useful answers.

  • Contract custom fields header data is not getting Saved(SRM7.02)

    Hi Experts,
    I have created a custom tab on the Header screen of SRM contract and that tab has 10 custom fields..Also, meta data custom fields properly binded to the custom webdynpro screen..But the problem here is when the data is filled on the custom tab screen and press SAVE button, after reopening the contract the custom field values are getting disappered. Version SRM7.02
    Thanks for quick response..
    Thanks,
    Krishna.

    Hi Experts,
    Please reply
    Thanks,
    Krishna.

  • Customer Fields values in FAGLL03 not displayed in background job

    Hi Experts
    My client has implemented customer fields in transaction FAGLL03 through enhancement.
    When I run the report in background, these fields are appearing but the values are missing, e.g., the columns are displayed in blank.
    Can you help me with this problem?
    Kind regards
    Mayumi Blak

    Hi,
    Please execute report in foreground for small period and check output whether those fields are getting populated.
    Regards,
    Tejas

  • E-Mail field on "Address" tab not editable in SU3

    We were considering allowing end users to change their email address (stored on their user master record) via transaction SU3; however, in testing, even with SAP_ALL assigned, that field is not open for editing.  We are using CUA, but that field is specified for local updating in our CUA settings.  That field is available for editing from transaction SU01, so I believe the CUA settings are correct.  Any idea why an end user is not able to update this field via SU3?
    Many thanks.
    - Jonathan Ruth

    Hi,
    The following links would give you an over view.
    http://help.sap.com/saphelp_47x200/helpdata/en/a9/1a1ba3db9343beb2723452255003c5/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/44/4dd720b5ac2152e10000000a114a6b/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a9/1a1ba3db9343beb2723452255003c5/frameset.htm
    Hope this helps
    Cheers
    Soma

  • I am looking at a personalization where I want to make the quantity field on a PO not editable. I need this only for certain lines.

    I need to disable quantity field on a PO based on a condition.
    My current approach is to keep the line number in local variable and disable the quantity on that line itself using forms personalization.
    I could succeed to an extent where I could store the line number in local variable but I am not able to proceed beyond that. Please help.

    Hi,
    Have tried with following setting ?
    Trigger Event = WHEN-NEW-RECORD-INSTANCE trigger  or WHEN-VALIDATE-RECORD trigger
    Trigger Object = PO_LINES
    Condition  =  < as per business need >

  • Custom field in Account Partners Edit page

    Need to display a new custom field in Account Partners Edit page. We are not able to find the object definition of "Account Partners" which we can edit. Is option of adding a custom field in Account Partners Edit available in CRMOD? Will enabling "Partner Relationship Management" help in this regard?

    At this time it is not possible to add a custom field in the Account Partners Edit. I would recommend submitting a enhancement request to CRM On Demand customer care.

  • OTL Timekeeper Form Custom Field map to specific Element Input Value

    Hello Everyone,
    I have the below requirement.
    1. Create a custom field in OTL Timekeeper Form. This field is based on the Element Selected on the timecard.
    2. Once the Timecard is transferred to Payroll, the custom field should go to a specific input value of that element.
    I know how to perform Step 1 above. But i am unable to find out how i can map the value in custom field to a specific Input value of the element.
    Any inputs are appreciated.
    Regards,
    Jay

    Any tips people?
    Can this be achieved?
    This is what i have done so far.
    1. Created a new Value set for the custom field.
    2. Created an alternate mapping to map the value set value to InputValue13.
    3. Created the alternate name.
    4. Added the alternate name to 'OTL Alternate Names' DFF.
    5. Added the Alternate name to the 'Preferences'.
    Testing:
    1. Created a Timecard populating the custom field.
    2. Timecard submitted and approved successfully.
    3. I verified that the custom field value goes into attribute13 of hxc_time_attributes where the attribute category is the corresponding element (should it be against the attribute category: Dummy Element Context? If Yes, then how to do it?).
    4. Then i ran the program 'Transfer Time from OTL to BEE'. This transferred the values into hxt_timecards_f, hxt_sum_hours_worked_f, hxt_det_hours_worked_f. But nowhere in these tables do i see the custom value.
    Did i miss any step? I did not define anything in the 'Define Mapping Components' of Deposit/Retrieval Process because InputValue13 is already part of it unter type 'Dummy Element Context'.
    5. Since it is not in hxt tables, i did not find it in pay_batch tables too.
    Any guidance is appreciated.
    Regards,
    Jay

  • Custom fields not getting updated in Mass Maintenance-MM17

    Hi,
    I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17.  I have checked the notes 44410, 576160, 414020 and 116311.  I have done the following changes as per the sap notes.
    1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that  
        segment.
    2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
    3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
    4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
    5. Added the custom field in the table MASSFLDLST.
    6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the 
        sap notes.
    The custom field is not getting updated through mass maintenance.  Please let me know if i have missed anything?
    Thanks,
    Geeta

    I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

Maybe you are looking for